Info [How-To]: Changing USB-to-Ethernet adapter VID/PID to match D-LINK DUB-E100

Autotrician schrieb:

Hi, can anybody help I have a USB 3.0 Eth adapter with an AX88179 and trying use it for comms with a MIB2 Delphi unit which doesn't work so I'm hoping to change VID/PID. Following the guide here there is only one location in the eeprom and I'm unable to change it due the following error.Cannot set eeprom data: invalid argument any help would be much appreciated.

Zum Vergrößern anklicken....

reasson schrieb:

made it to change the PID and VID now the adapter is recognized like D-link DUB-E100 rev. B1 Used this nice tool

Sie müssen registriert sein, um Links zu sehen.

, extracted the ROM than edited with HxD hex editor then restored back to the device. I haven't tested it yet but i think it will work. This is the adapter from china:

Sie müssen registriert sein, um Links zu sehen.

.

UPDATE: unfortunately i can get telnet connection on Delphi MST2_EU_VW_P0639D, enabled lan in green menu, configured the network on laptop 192.168.1.10 with port 23 and 123 in Putty and i have time out error. Usb adapter started to flash after enebled lan in green menu but no connection. Probably i must buy D-link E-100 adapter.

Spoiler

[ATTACH = full] 134384 [/ ATTACH] [/ SPOILER]

Zum Vergrößern anklicken....

dgateles schrieb:

@hani_t

Code:

sudo ethtool -E enx000ec6d3e429 magic 0xdeadbeef offset 0x0088 value 0x95

offset & length out of bounds

I tried to do the reverse but it gave me that. How do I revert?

Zum Vergrößern anklicken....

ethtool -E|--change-eeprom devname [magic N] [offset N] [length N] [value N]

sudo ethtool -E devname magic 0xdeadbeef offset 0x88 length 0x01 value 0x01
sudo ethtool -E devname magic 0xdeadbeef offset 0x89 length 0x01 value 0x20
sudo ethtool -E devname magic 0xdeadbeef offset 0x8A length 0x01 value 0x02
sudo ethtool -E devname magic 0xdeadbeef offset 0x8B length 0x01 value 0x1A
sudo ethtool -E devname magic 0xdeadbeef offset 0x48 length 0x01 value 0x01
sudo ethtool -E devname magic 0xdeadbeef offset 0x49 length 0x01 value 0x20
sudo ethtool -E devname magic 0xdeadbeef offset 0x4A length 0x01 value 0x02
sudo ethtool -E devname magic 0xdeadbeef offset 0x4B length 0x01 value 0x1A

sudo ethtool -E devname magic 0xdeadbeef offset 0x88 length 0x01 value 0x01
sudo ethtool -E devname magic 0xdeadbeef offset 0x89 length 0x01 value 0x20
sudo ethtool -E devname magic 0xdeadbeef offset 0x8A length 0x01 value 0x05
sudo ethtool -E devname magic 0xdeadbeef offset 0x8B length 0x01 value 0x3c
sudo ethtool -E devname magic 0xdeadbeef offset 0x48 length 0x01 value 0x01
sudo ethtool -E devname magic 0xdeadbeef offset 0x49 length 0x01 value 0x20
sudo ethtool -E devname magic 0xdeadbeef offset 0x4A length 0x01 value 0x05
sudo ethtool -E devname magic 0xdeadbeef offset 0x4B length 0x01 value 0x3c

emitaswid schrieb:

Entschuldigen Sie mein Deutsch. Es wird von Google Übersetzer übersetzt.
Ist der D-Link DUB-E100 REV E1 Adapter mit einer Delphi MHS2_ER_AU_P2035 MIB kompatibel?

Spoiler

Du musst Regestriert sein, um das angehängte Bild zusehen.

Du musst Regestriert sein, um das angehängte Bild zusehen.

Zum Vergrößern anklicken....

Slimshouki schrieb:

I have the same issue exactly as you. Have you managed to make telnet works?
I converted ax88772 to DUB-E100 (0x2001, 0x3c05)
Update: finally got it working changing VID to 1a02 instead of 3c05

Zum Vergrößern anklicken....