[HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

[Bleeding]

[HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

The DeltaCam now fully supports the HD+ HD03 / HD03A / HD04 SmartCards, FREE of any (CI+) restrictions like limited recording/timeshifting/fast-forwarding, giving users full freedom and control over content.

HD03 / HD03A / HD04 support is brought to all existing DeltaCam 1.0 and 2.0 (and also unicam Evo) customers at NO additional requirements or costs!


We recently surpassed 1100 builds. Well over 1100 firmware builds that have been passed to testers until this day. An incredible number considering the short time frame, also explaining the amazing quality we have today. Big thanks to all the testers who worked their asses off to achieve that!


Python 1.91[

Sie müssen registriert sein, um Links zu sehen.

| DOWNLOAD ]

Changes since version 1.90:

• [1.91] [HOT] UHD1 by ASTRA / HD+ - Support for UHD (HEVC) streams added
  
  
• [1.91] [HOT] TéléSAT (M7 Group) “paired” (HD) channels support added (via SECA MediaGuard3 Nano 01)
  
  
• [1.91] Entitlements support for NAGRA SmartCards operated in Merlin mode added
  HD+ HD03, HD03A, HD04 and also HD02 after it has been used inside a HD+ certified STB/CI+ module
  
  
• [1.91] Revised and optimized NAGRA CAK7 math functions for HD+ HD03 / HD03A / HD04
  • Dramatically improved init duration
  • Faster channel switching
  • Fixed long-term stability for some cards (passed 24-hour test)
    
    
• [1.91] Parallel EMM support for complex Twin-Card combinations (like the popular V14/HD02) added (never miss an activation or update signal again )
  
  
• [1.91] EMM Info are now available for both SmartCards (ISO/SIM) in Debug Info to verify Twin-Card EMM
  
  
• [1.91] Blocked (via modbox) / logged only EMMs are now also counted in EMM Info menu
  
  
• [1.91] Fixed recurring “configuration changed” message at boot with certain SmartCard combinations
  
  
• [1.91] Improved PMT/ECM handling for Digital Devices MTD operation
  
  
• [1.91] Improved Sky V14 pairing status information in SmartCard Info menu (not paired / prepaired / paired)
  
  
• [1.91] Updated Link ist nicht mehr aktiv. with latest reported iDTV/STB devices (thanks everybody for reporting!)
  
  
• [1.91] Adapted
  Sie müssen registriert sein, um Links zu sehen.
  /
  Sie müssen registriert sein, um Links zu sehen.
  and
  Sie müssen registriert sein, um Links zu sehen.
  to latest changes
  
  
  
• [1.90] [HOT] Full support for HD+ HD04 (186A) SmartCard added
  
  Sie müssen registriert sein, um Links zu sehen.
  updated, thanks @tamanihund for providing such a SmartCard!
  
  
• [1.90] [HOT] HD03 / HD03A / HD04 SmartCard activation/update/renewal support added
  
  
• [1.90] Changed default Compatibility mode for the DeltaCam V2 to improve reliability with Panasonic (and also others like Samsung) devices, especially the new 4K Ultra HD models
  Thanks @tamanihund and @Cater Carlo for testing!
  • Panasonic TX-60CXW754 and TX-43CXW754 added to Link ist nicht mehr aktiv.
  • Panasonic DMR-BST950 added to
    Sie müssen registriert sein, um Links zu sehen.
• [1.90] The Compatibility mode is now also available for the DeltaCam V2, further improving support for some Philips PFL / LG TV models and Kathrein UFO headends
  Thanks @örlgrey for testing!
  
  
• [1.90] Automatic management of the initial CAID list, fixing failing descrambling with some TVs/STBs under certain circumstances (CAID not or too far back in list), making custom CAID lists pretty much obsolete
  
  
• [1.90] Introducing CAM messages to inform the user about certain CAM events/incidents
  
  
• [1.90] NDS VideoGuard (Sky): fixed blockemm-by07 modbox parameter blocking all EMMs
  
  
• [1.90] HD+ HD02 can now be run in Merlin mode, fixing card boot after the card has been used in certified (CI+) hardware
  
  
• [1.90] 3+ provider ID mapping added for SRG SSR ViACCESS 5 SmartCards for easier tier identification in the entitlements menu
  
  
• [1.90] Reworked/extended some Debug Info menus for easier troubleshooting (PID Info, CAIDs list)
  
  
  
• [1.80][HOT] Support for HD+ HD03 / HD03A (1860) SmartCards (NAGRA CAK7)
  
  
• [1.80][HOT] Manual EMM writing (for Sky V13 / V14 SmartCards)
  
  
• [1.80][NEW] Support for Indovision NDS VideoGuard SmartCard (09C1) added
  Added to
  Sie müssen registriert sein, um Links zu sehen.
• [1.80][NEW] Mature rating of Conax SmartCards can now be managed over CAM menu
  
  
• [1.80] Fixed tier expiration date being off by 2-3 weeks for some HD+ HD02 SmartCards
  
  
• [1.80] Active EMM blocking rules (as provided via the modbox file) can now be verified via CAM menu (SmartCard/SIM Card > Info)
  
  
• [1.80] NDS VideoGuard SmartCard (e.g. Sky V13/V14) status (virgin/activated, tiers missing/expired, paired) is now displayed via CAM menu (see SmartCard/SIM Card > Info)
  
  
• [1.80] modbox EMM filter rule blockemm-bylen is now supported for all CAS/providers

Sky V13 / V14 Anti-Pairing

Ab Cobra/Python 1.80 können EMMs manuell auf die SmartCard geschrieben werden. Für Sky sind dafür folgende SmartCard Einstellungen (Settings > Advanced Settings > SmartCard / SIM Card Settings) notwendig:

Blocker GA-EMM: block all
Blocker SA-EMM: block all
Blocker UA-EMM: log only

Damit werden nun keine EMMs mehr “live” auf die SmartCard geschrieben, sondern lediglich die interessanten EMM-UA geloggt. Diese können unter Debug Info > EMM Info > EMM Data analysiert und bei positiver Bewertung (keine Pairing-Gefahr) per “Knopfdruck” manuell auf die SmartCard geschrieben werden.

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

Das Wissen darüber, wie EMMs zu bewerten sind, muss sich jeder selber aneignen. Hilfestellung dafür gibt es von erfahrenen Nutzern in einschlägigen Foren.

Bitte beachten, dass das DeltaCam defaultmäßig keine EMMs blockt, da mit dieser Vorgehensweise die volle Kartenfunktionalität beeinträchtigt wird!


UHD1 by ASTRA / HD+

Mit der aktuellen Firmware kann der 1. offizielle verschlüsselte deutsche UHD Kanal “UHD1 by ASTRA / HD+” mit dem DeltaCam/unicam Evo entschlüsselt werden. Die Firmware ist damit auch für zukünftige UHD Kanäle (mit HEVC-Video und AAC-Audio Komprimierung) vorbereitet.

Aktuell ist UHD1 nur NAGRA verschlüsselt (siehe angehängten Screenshot). Der Kanal kann daher nur mit den HD+ Karten HD01, HD02, HD03/HD03A und HD04 entschlüsselt werden. Mit NDS Karten von Sky (V13, V14) schlägt die Entschlüsselung daher momentan noch fehl.

DeltaCam/unicam Evo sind theoretisch dazu in der Lage, bis zu 4 solcher breitbandiger UHD Kanäle parallel im MTD-Verfahren zu entschlüsseln!

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

Most notable changes in recent versions:

• Support for “paired” HD+ HD03 / HD03A / HD04 SmartCards (NAGRA CAK7 w. Chipset Pairing)
• Sky DE (V13 / V14)
  Sie müssen registriert sein, um Links zu sehen.
  (manual EMM writing, selective EMM blocker)
• Descrambling of “paired” HD channels for CanalSat and TéléSAT (SECA MediaGuard3 Nano 01)
• AU (Auto-Update) for TNTSAT SurEncryption keys (including HD)
• MultiPID/MTD: 8 channels with up to 32 PIDs
• NDS FastMode+ to further improve MTD performance for Sky

Cobra 1.91 (EMU -

Sie müssen registriert sein, um Links zu sehen.

) [

Sie müssen registriert sein, um Links zu sehen.

| DOWNLOAD ]

Changes since version 1.90:

• Includes all changes from Python 1.91
• T*l*n*t fixed

Most notable EMU provider additions in recent versions:

• SRG SSR / SRF (ViACCESS2.6)

• TNTSAT (ViACCESS3)
• Digitürk (CryptoWorks)
• T*l*n*t (NAGRA2)
• UPC Cablecom / TELECLUB (NAGRA2)
• ViaSat (SoftNDS)
• BISS
• [Obsolete] Skylink (CryptoWorks)
• [Obsolete] AustriaSat / MTV / ORF (CryptoWorks)

Keep in mind that the Cobra firmware does not have the keys burnt in but requires the user to flash them via DeltaFlashLoader (softcam.key format is supported).


DeltaFlashLoader 1.41 [ Win | Mac | Linux CLI | Linux GUI ]

Changes sinceversion 1.40:

• [Win] Full support for Windows 10
• [Mac] Full support for Mac OS X El Capitan (10.11)

Check out our

Sie müssen registriert sein, um Links zu sehen.

(

Sie müssen registriert sein, um Links zu sehen.

) on how to flash the new firmware onto the DeltaCam.

Latest Windows 10 is supported by the DeltaFlashLoader!

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

unidelta.key 2015-10-13 (for Cobra only)

Included keys:

• [NEW] Bulsatcom (39.0°E) updated
• [NEW] ESPN Caribbean / ESPN Syndication (15.0°W) updated
  
  
• SRG SSR (13.0°E)
• Mezzo (13.0°E)
• TNTSAT (19.2°E)
• Digea Greece (3.1°E)
• EPT/ERT (3.1°E)
• Digitürk (7.0°E)
• Ant1 Europe (9.0°E)
• Bulsatcom (39.0°E)
• Turksat (42.0°E) TRT
• UPC Direct (0.8°W)
• ESPN Caribbean / ESPN Syndication (15.0°W)
• BBC (27.5°W)
• UPC Cablecom / TELECLUB (Switzerland)

Download:

Spoiler

Sie müssen registriert sein, um Links zu sehen.

This is a basic and well tested key file, containing only the most common providers. Please consider trying this key file in case of problems with 3rd party key files.
3rd party key files (typically named softcam.key) might provide more international keys.

 

[wouter016]

AW: [HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

And T*L*N*T ? No solution Found?

 

[Bleeding]

AW: [HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

But you can read, right? So read the changelog!!

 

[TechniSurfer]

AW: [HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

Danke für die neue Software/thank´s for the new software

 

[tsgprto1]

AW: [HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

Funktioniert auch eine MaxTV Croatia Nagra Karte da drinn? ? Ich glaube es ist auch Cak7...

 

[Bleeding]

AW: [HOOOT] Python/Cobra 1.91! Adding support for UHD1 by ASTRA / HD+!

Nein, diese Karte funktioniert im DeltaCam nicht.