HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

[jaydee2608]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Hier das logfile, habe nur den dns namen rausgenommen. Weiß nicht was eig noch geXXXt werden müsste...

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jul 30 15:05:56 2011
-------------------------------------------------------------------------------
2011/07/30 15:05:56 2AAC67D0 s version=1.00-unstable_svn, build #4443, system=mips-tuxbox-linux, nice=-1
2011/07/30 15:05:56 2AAC67D0 s client max. idle=120 sec, debug level=0
2011/07/30 15:05:56 2AAC67D0 s max. logsize=256 Kb
2011/07/30 15:05:56 2AAC67D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/07/30 15:05:56 2AAC67D0 s auth size=4976
2011/07/30 15:05:56 2AAC67D0 s services reloaded: 0 services freed, 3 services loaded
2011/07/30 15:05:56 2AAC67D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/07/30 15:05:56 2AAC67D0 s signal handling initialized (type=sysv)
2011/07/30 15:05:56 2AAC67D0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/07/30 15:05:56 2AAC67D0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/07/30 15:05:56 2AAC67D0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/07/30 15:05:56 2AAC67D0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/07/30 15:05:56 2AAC67D0 s monitor: disabled
2011/07/30 15:05:56 2AAC67D0 s camd33: disabled
2011/07/30 15:05:56 2AAC67D0 s camd35: disabled
2011/07/30 15:05:56 2AAC67D0 s cs378x: disabled
2011/07/30 15:05:56 2AAC67D0 s newcamd: disabled
2011/07/30 15:05:56 2AAC67D0 s cccam: initialized (fd=5, port=16000, ip=192.168.178.21, crypted)
2011/07/30 15:05:56 2AAC67D0 s radegast: disabled
2011/07/30 15:05:56 2AAC67D0 s http thread started
2011/07/30 15:05:56 2AAC67D0 s creating thread for device /dev/sci1
2011/07/30 15:05:56 2AAC67D0 s creating thread for device /dev/sci0
2011/07/30 15:05:56 2AAC67D0 s creating thread for device name
2011/07/30 15:05:56 2AAC67D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/07/30 15:05:56 2AAC67D0 s waiting for local card init
2011/07/30 15:05:56 2B4DB4B0 h HTTP Server listening on port 17000
2011/07/30 15:05:56 2B8DB4B0 r reader thread started (thread=2B8DB4B0, label=redlight, device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2011/07/30 15:05:56 2BCDB4B0 r reader thread started (thread=2BCDB4B0, label=dolly, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2011/07/30 15:05:56 2C0DB4B0 p proxy thread started (thread=2C0DB4B0, label=cccamremote1, server=name)
2011/07/30 15:05:56 2C0DB4B0 p connecting to name
2011/07/30 15:05:56 2C0DB4B0 p name: resolved ip=212.79.182.238
2011/07/30 15:05:56 2B8DB4B0 r redlight card detected
2011/07/30 15:05:56 2BCDB4B0 r dolly card detected
2011/07/30 15:05:59 2B8DB4B0 r ERROR in IO_Serial_Read errno=0
2011/07/30 15:05:59 2BCDB4B0 r ERROR in IO_Serial_Read errno=0
2011/07/30 15:05:59 2B8DB4B0 r ATR:
2011/07/30 15:05:59 2BCDB4B0 r ATR:
2011/07/30 15:06:04 2BCDB4B0 r ERROR in IO_Serial_Read errno=22
2011/07/30 15:06:04 2BCDB4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/07/30 15:06:04 2B8DB4B0 r ERROR in IO_Serial_Read errno=22
2011/07/30 15:06:04 2B8DB4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2011/07/30 15:06:05 2BCDB4B0 r [viaccess-reader] using ecm #60c for long viaccess ecm
2011/07/30 15:06:05 2B8DB4B0 r [viaccess-reader] using ecm #60d for long viaccess ecm
2011/07/30 15:06:05 2BCDB4B0 r type: Viaccess (standard atr), caid: 0500, serial:
2011/07/30 15:06:05 2B8DB4B0 r type: Viaccess (standard atr), caid: 0500, serial:
2011/07/30 15:06:05 2B8DB4B0 r providers: 2 (FFF8F0,043800)
2011/07/30 15:06:05 2B8DB4B0 r [viaccess-reader] ready for requests
2011/07/30 15:06:05 2B8DB4B0 r found cardsystem
2011/07/30 15:06:05 2B8DB4B0 r [viaccess-reader] card detected
2011/07/30 15:06:06 2B8DB4B0 r [viaccess-reader] serial:
2011/07/30 15:06:06 2BCDB4B0 r providers: 3 (FFFAA0,042200,042210)
2011/07/30 15:06:06 2BCDB4B0 r [viaccess-reader] ready for requests
2011/07/30 15:06:06 2BCDB4B0 r found cardsystem
2011/07/30 15:06:06 2BCDB4B0 r [viaccess-reader] card detected
2011/07/30 15:06:06 2BCDB4B0 r [viaccess-reader] serial:
2011/07/30 15:06:06 2B8DB4B0 r provider: 1, id: FFF8F0, name: Redlight, sa: BE4E821C, geo: empty
2011/07/30 15:06:06 2BCDB4B0 r provider: 1, id: FFFAA0, name: ISSUER, sa: B3063F7C, geo: empty
2011/07/30 15:06:06 2B8DB4B0 r provider: 2, id: 043800, name: Redlight, sa: BE4E821C, geo: FF FF FF FF
2011/07/30 15:06:06 2B8DB4B0 r class: 01, expiry date: 2011/07/30 - 2012/07/28
2011/07/30 15:06:06 2BCDB4B0 r provider: 2, id: 042200, name: TURBOSAT 1, sa: B3063F7C, geo: FF FF FF FF
2011/07/30 15:06:06 2BCDB4B0 r class: F5, expiry date: 2011/07/30 - 2012/01/25
2011/07/30 15:06:07 2BCDB4B0 r provider: 3, id: 042210, name: TURBOSAT 2, sa: B3063F7C, geo: FF FF FF FF
2011/07/30 15:06:07 2AAC67D0 s init for all local cards done
2011/07/30 15:06:07 2AAC67D0 s anti cascading disabled
2011/07/30 15:06:07 2C5174B0 c plain dvbapi-client granted (dvbapi, au=auto)
2011/07/30 15:06:07 2C5174B0 c dvbapi: 10 entries read from oscam.dvbapi
2011/07/30 15:06:11 2C5174B0 c dvbapi: [ADD PID 0] CAID: 0500 ECM_PID: 1D8D PROVID: 042200
2011/07/30 15:06:11 2C5174B0 c dvbapi: [ADD PID 1] CAID: 0625 ECM_PID: 1D97 PROVID: 000000
2011/07/30 15:06:11 2C5174B0 c dvbapi: new program number: 1274 (0500:1274 unknown)
2011/07/30 15:06:11 2C5174B0 c dvbapi (0500&042200/1274/35:3575): rejected caid (0 ms) (of 0 avail 0) (invalid caid 500)
2011/07/30 15:06:11 2C5174B0 c dvbapi: Found 1 IRDETO ECM CHIDs
2011/07/30 15:06:11 2C5174B0 c dvbapi: try pids again #1
2011/07/30 15:06:11 2C5174B0 c dvbapi (0625&000000/1274/34:4433): rejected caid (0 ms) (of 0 avail 0) (invalid caid 625)
2011/07/30 15:06:11 2C5174B0 c dvbapi (0500&042200/1274/35:3575): rejected caid (0 ms) (of 0 avail 0) (invalid caid 500)
2011/07/30 15:06:12 2C5174B0 c dvbapi: try pids again #2
2011/07/30 15:06:12 2C5174B0 c dvbapi (0625&000000/1274/34:4433): rejected caid (0 ms) (of 0 avail 0) (invalid caid 625)
2011/07/30 15:06:12 2C5174B0 c dvbapi (0500&042200/1274/35:3575): rejected caid (0 ms) (of 0 avail 0) (invalid caid 500)
2011/07/30 15:06:12 2C5174B0 c dvbapi: try pids again #3
2011/07/30 15:06:12 2C5174B0 c dvbapi: can't decode channel
2011/07/30 15:06:12 2C5174B0 c dvbapi (0625&000000/1274/34:4433): rejected caid (0 ms) (of 0 avail 0) (invalid caid 625)
2011/07/30 15:06:14 2C5174B0 c dvbapi: [ADD PID 0] CAID: 0500 ECM_PID: 1E21 PROVID: 043800
2011/07/30 15:06:14 2C5174B0 c dvbapi: [ADD PID 1] CAID: 4ABF ECM_PID: 1D77 PROVID: 000000
2011/07/30 15:06:14 2C5174B0 c dvbapi: [ADD PID 2] CAID: 0647 ECM_PID: 1ECE PROVID: 000000
2011/07/30 15:06:14 2C5174B0 c dvbapi: [ADD PID 3] CAID: 0B02 ECM_PID: 1D78 PROVID: 000000
2011/07/30 15:06:14 2C5174B0 c dvbapi: [ADD PID 4] CAID: 0628 ECM_PID: 1D75 PROVID: 000000
2011/07/30 15:06:14 2C5174B0 c dvbapi: new program number: 4223 (0500:4223 unknown)
2011/07/30 15:06:14 2C5174B0 c dvbapi (0500&043800/4223/3A:3C10): rejected caid (0 ms) (of 0 avail 0) (invalid caid 500)
2011/07/30 15:06:15 2C5174B0 c dvbapi (4ABF&000000/4223/47:117F): rejected caid (0 ms) (of 0 avail 0) (invalid caid 4abf)
2011/07/30 15:06:15 2C5174B0 c dvbapi: Found 4 IRDETO ECM CHIDs
2011/07/30 15:06:15 2C5174B0 c dvbapi: trying irdeto chid index: 1
2011/07/30 15:06:15 2C5174B0 c dvbapi (0647&000000/4223/44:308C): rejected caid (0 ms) (of 0 avail 0) (invalid caid 647)
2011/07/30 15:06:15 2C5174B0 c dvbapi: trying irdeto chid index: 2
2011/07/30 15:06:15 2C5174B0 c dvbapi (0647&000000/4223/3C:3C2A): rejected caid (0 ms) (of 0 avail 0) (invalid caid 647)
2011/07/30 15:05:09 2C5174B0 c dvbapi: trying irdeto chid index: 3
2011/07/30 15:05:09 2C5174B0 c dvbapi (0647&000000/4223/3C:A874): rejected caid (1 ms) (of 0 avail 0) (invalid caid 647)
2011/07/30 15:05:09 2C5174B0 c dvbapi (0647&000000/4223/3C:2169): rejected caid (0 ms) (of 0 avail 0) (invalid caid 647)
2011/07/30 15:05:09 2C5174B0 c dvbapi (0B02&000000/4223/6C:5161): rejected caid (1 ms) (of 0 avail 0) (invalid caid b02)

oscam.conf

Spoiler

[global]
nice = -1
serverip = 192.168.178.21
waitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log
maxlogsize = 256
saveinithistory = 1

[webif]
HttpPort = 17000
HttpUser = admin
HttpPWD = nt
HttpRefresh = 30
HttpAllowed = 192.168.178.1-192.168.178.255
Httpdyndns =
HttpReadOnly = 0
httpsavefullcfg = 1
httpjsicons = 1

[cccam]
Port = 16000
Reshare = 1
Ignorereshare = 0
minimizecards = 0
keepconnected = 1
updateinterval = 240
Stealth = 1
reshare_mode = 0
Version = 2.2.1

[dvbapi]
Enabled = 1
Boxtype = dreambox
User = dvbapi
AU = 1
pmt_mode = 0

oscam.server

Spoiler

[reader]
label = redlight
enable = 1
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
lb_weight = 100


[reader]
label = dolly
enable = 1
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
lb_weight = 100


[reader]
label = cccamremote1
enable = 1
protocol = cccam
device = dns,port
account = user
password = pwd
inactivitytimeout = 1
reconnecttimeout = 30
caid = 1702,1833
group = 3
lb_weight = 100
cccversion = 2.2.1
cccmaxhops = 2
ccckeepalive = 1

oscam.user

Spoiler

[account]
User = dvbapi
Group = 1,2,3
AU = 1
cccmaxhops = 2
caid = 1702,1830,1833
betatunnel = 1833.006A:1702,1833.006B:1702,1833.006F:1702,1833.0070:1702,1833.0071:1702,1833.0072:1702,1833.0075:1702,1833.0077:1702,1833.0078:1702,1833.0079:1702,1833.007A:1702,1833.0081:1702,1833.0082:1702,1833.0083:1702,1833.0084:1702

 

[Matze1403]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

erstmal die caid`s im oscam user anpassen... das sind nämlich die für sky und hd+

dann scheinen deine Reader einstellungen nicht zu passen, versuch mal mit dem oscam config creator dir die passenden configs für deine Karten erstellen zu lassen. Ich besitze diese Karten nicht und kenne mich somit auch nicht mit den passenden Reader configs aus.

geixxt werden sollte alles hinter ATR und serial

 

[jaydee2608]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Soweit ist alles hell. Danke an Matze

Woran kann es liegen wenn ein Sender nicht hell wird? (SCT HQ)
Kann die oscam.services der Grund dafür sein, wenn genau für den sender der Eintrag fehlt?

 

[jaydee2608]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Hat denn niemand eine Idee???

 

[Matze1403]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Jep das wird der grund sein. Trag ihn noch händisch in die Services.

Für danke gibts den danke Button 

 

[jaydee2608]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Da steht der Sender drin, funzt trotzdem nicht.

 

[Matze1403]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Hat sich vielleicht mal der Transponder geändert, so das du jetzt vielleicht nen alten in der services hast?

 

[jaydee2608]

AW: HELP!!! OSCAM - Redlight HD Viaccess - CCCAM remote

Habe die services in den readern und im user angepasst. Jetzt läufts.