HD02 plötzlich dunkel

[Bodo-1]

Spoiler

Wenn du natürlich alles Blocken tust (

(blockemm-unknown = 1)

Kann auch keine Verlängerung auf die karte.

Die haben aber mit der Verlängerung der Hd02 nix zu tun.

Er braucht dazu Uniq EMM und die blockt er nicht

 

[extra]

Die Karte einfach in einen *tauglichen* Receiver stecken und gut ist, ich habe meinen Edision Mini auch noch hier rumliegen, um Karten zu aktivieren, obwohl ich den schon ewig nicht mehr gebraucht habe..

 

[Smiley007]

Wenn du deine Karen SerialID per PN schickst, schicke ich dir deine Aktivierer

gehe auf die Reader Übersicht und schaue ob Unique EMM zu deiner HD+ Karte kommen

mit dvbsnoop kann man auch die EMM´s loggen

 

[sodex]

Läuft im internen Reader in der Vu+ Duo².

dann mach dir auf deine Duo2 die gbox.net 811 vom VTI Feed auf die Box und steck die HD02 Karte in den Kartenleser wo die Emm Blocker auf =0 stehen - steht alles zum nachlesen in den .cfg's drin - auf Pro7 HD schalten und nach ca. 20-30 sollte es hell sein (wenn du keine ungepairete V14/13 in deiner Duo2 verwendest, kannst auch diese .cfg verwenden)

Spoiler: gbox.cfg

# gbox config file

# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 01 } 192.168.178.20 8024

# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }

# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.0.251 7025

# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
#V: { 00 10 } #Slot 1
#V: { 00 20 } #Slot 2
V: { 00 30 } #Slot 1+2
#V: { 00 3F } #Slot 1+2+SC8in1

# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 } 9600

# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600

# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.

# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 04 } /var/tmp/atack.txt // atack info file
#F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/null // ca device
#F: { 22 } /dev/null // dvr device
#F: { 23 } /dev/null // demux device
#F: { 31 } /dev/null // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
#F: { 43 } /dev/ttyUSB0 // rs232 com1# f�r externen Cardreader an com1 SC8in1 oder MCR 4/8 oder Smargo
#F: { 44 } /dev/ttyUSB1 // rs232 com2# f�r externen Cardreader an com2 SC8in1 oder MCR 4/8 oder Smargo

# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# Ist nicht Aktiv geschaltet ,also keine Funktion
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds

# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1

# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300

# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1

# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
#F: { AA } 1

Spoiler: softcam.cfg

# CAS settings (NEW)
#
#[generic]
#reset_rs232_buffer = 1 ; (default: 1) empty RS232 buffer before writing
#
#[slot-n] ; slot section with n=1..18
#include = /foo/slot.cfg ; looking for section parameters in user defined configuration file, only outside of a section defined parameters will be used
#initialization = basic ; (default: basic) [basic,extended] init card in basic or extended mode
#disable_pts = 0 ; (default: 0) enable/disable protocol type selection (PTS) handshake
#enable_ice = 0 ; (default: 0) enable/disable irdeto cryptoworks enveloped support
#enable_onionmode = 0 ; (default: 0) enable/disable irdeto/nagra aladin onion mode (1833(1702)1833)
#alternative_frequency = 0 ; (default: 0) check additional osc frequency, value in kHz, example 8MHz=8000000
#alternative_baudrate = 0 ; (default: 0) check additional baudrate for atr, value in bit/s, example 81861
#byte_delay = 0 ; (default: 0) unit (1e-6 s)
#instruction_delay = 0 ; (default: 0) unit (1e-3 s)
#
#enable_unique_emm = 0 ; (default: 0) set unique emm section filter on demux device
#enable_shared_emm = 0 ; (default: 0) set shared emm section filter on demux device
#enable_global_emm = 0 ; (default: 0) set global emm section filter on demux device
#block_unique_emm = 1 ; (default: 1) block unique address/hex_serial emm
#block_shared_emm = 1 ; (default: 1) block shared address/provider emm
#block_global_emm = 1 ; (default: 1) block global address/all_card emm
#block_user_emm = 1 ; (default: 1) block user emm, read from /var/tmp/remm.txt
#save_processed_emm = 0 ; (default: 0) save processed EMMs to (/var/tmp/scXX.emmproc)
#save_processed_emm_file= /var/keys/sc0X.emmproc; (default: /var/tmp/scXX.emmproc) user defined output file
#save_rejected_emm = 0 ; (default: 0) save rejected EMMs to (/var/tmp/scXX.emmblock)
#save_rejected_emm_file = /var/keys/sc0X.emmblock; (default: /var/tmp/scXX.emmblock) user defined output file
#
#sidfilter = 000C,000D ; define sids can dispatch or not dispatch by card
#sidfilter_local_policy = allow_all ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
# ; deny_all - old cwshare S-Line local rule 00
# ; allow_all - old cwshare S-Line local rule 01
# ; allow_defined - old cwshare S-Line local rule 02
# ; deny_defined - old cwshare S-Line local rule 03
#sidfilter_global_policy= allow_defined ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
# ; deny_all - old cwshare S-Line global rule 00
# ; allow_all - old cwshare S-Line global rule 01
# ; allow_defined - old cwshare S-Line global rule 02
# ; deny_defined - old cwshare S-Line global rule 03
#sidfilter_teacher = card ; [card,network] use selected ecm request source to update sidfilter (add or delete current sid)
# ; card - old cwshare S-Line global rule 03, means allow defined and update by zone0
# ; network - old cwshare S-Line global rule 03, means allow defined and update by zone1
#
#pidfilter = 100C,100D ; define pids can dispatch or not dispatch by card
#pidfilter_local_policy = allow_all ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#pidfilter_global_policy= allow_defined ; (default: allow_all) [deny_all,allow_all,allow_defined,deny_defined]
#
########################################################################################
#V13/14 Karten
#Sobald f�r die Karte eine Verl�gerung gesendet wird erstellt die gbox in/tmp eine Datei
#Namens SC01.emmblock.Den dort enthaltenen Verl�gerer kopiert ihr dann in eine Datei Namens remm.txt
#und schiebt diese dann nach /tmp die gbox arbeitet diese Datei dann automatisch ab,
#und verl�gert dann die Karte.Ihr k�nnt die V13/14 karte nat�rlich auch in einen anderen Slot stecken ,
#ihr m�� dann aber die config genauso anlegen wie die f�r Slot 1.
#Solltet ihr noch mehr Karten haben und ein/en externe/n Reader/s benutzen dann m�� ihr die Slots erweitern.
#Ihr k�nnt bis zu 18 Slots erstellen. Slot1 und Slot2 sind immer eure internen Reader der Box ,ab Slot3 beginen dann
#eure externen Reader.

[generic]
reset_rs232_buffer = 1

[slot-1] # Exklusiv f�r V13/14 Karten
initialization = extended
disable_pts = 0
enable_ice = 0 # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency = 0
alternative_baudrate = 0
byte_delay = 0
instruction_delay = 0
#
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 1
save_rejected_emm = 1

[slot-2] # Karten die nicht geblock werden brauchen
initialization = extended
disable_pts = 0
enable_ice = 0 # # ORF Karte 0=cryptoworks/Mode 1=irdeto/Mode
alternative_frequency = 0
alternative_baudrate = 0
#
enable_unique_emm = 1
enable_shared_emm = 1
enable_global_emm = 1
block_unique_emm = 0
block_shared_emm = 0
block_global_emm = 0
block_user_emm = 0
save_processed_emm = 0
save_rejected_emm = 0

MfG sodex

 

[Smile0304]

Hallo,

meine HD 02 Karte läuft nach Verlängerung im VU+ Duo 2 nicht mehr.
Packe ich sie in eine andere Box mit cccam läuft die Karte.

Könnte mir jemand mal einen Tipp geben.
Hänge mal ein log an

Spoiler: HD+ 02

• 2017/05/18 14:01:47 3E5xxxxx8 c (ecm) 12345678 (1843@000000/0000/EF74/89:2DF7DxxxxxxxxxxxxxxxxxxxxxxxxxA28C12AC6): rejected group (0 ms) - SAT.1 HD (no matching reader)

• 2017/05/18 14:01:51 6A00FC96 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

• 2017/05/18 14:01:55 3E5xxxxxxx c (client) 12345678 disconnected from xxxxxxxxxxxxxxx

• 2017/05/18 14:01:55 0D1xxxxxxx38 c (client) encrypted cccam-client xxxxxxxxxx granted (12345678, au=off)

• 2017/05/18 14:01:56 6A00FC96 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

• 2017/05/18 14:02:01 0D1xxxx38 c (ecm) 12345678 (1843@000000/0000/EF74/89:B4B5xxxxxxxxxxxxxxxxxxxxxxxxxx181D5): rejected group (0 ms) - SAT.1 HD (no matching reader)

• 2017/05/18 14:02:01 0D1xxxxx38 c (ecm) 12345678 (1843@000000/0000/EF74/89:EF47EA

• 57F375762837626C7F985C92A7): rejected group (0 ms) - SAT.1 HD (no matching reader)

• 2017/05/18 14:02:01 6A00FC96 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

• 2017/05/18 14:02:13 0D1xxxx38 c (-) -- Skipped 2 duplicated log lines --

• 2017/05/18 14:02:13 0D1B6B38 c (ecm) 12345678 (1843@000000/0000/EF74/89:2F5Dxxxxxxxxxxxxxxxxxxxxxxxxxxx8734033): rejected group (0 ms) - SAT.1 HD (no matching reader)

 

[liwool]

Poste mal deine configs

 

[sodex]

@Smile0304 ,
wenn du die Oscam 11377 vom VTI Feed in Verwendung hast dann passe deine config's mal so an (im Ordner"etc/tuxbox/config"

Spoiler: oscam.conf

[global]
logfile = /var/tuxbox/config/oscam.log
nice = -1
maxlogsize = 1024
emmlogdir = /var/tuxbox/config/


[cs357x]
port = 13000


[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapi_local
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 17001
httpscript = /var/tuxbox/config/script/
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpallowed = 0.0.0.0-255.255.255.0
http_status_log = 1

Spoiler: oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11377
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hdplus
description = HD02
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = hdplus
rsakey = hdplus
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,2,2,0

Spoiler: oscam.user

[account]
user = dvbapi_local
au = 1
group = 1

MfG sodex

 

[Smile0304]

Hier meine Configs

Spoiler: Server reader

[reader]
label = hdplus02
description = HD + Karte
protocol = internal
device = /dev/sci1
services = hd02
caid = 1843
boxkey = A76xxxxxxxxxxx7C
rsakey = BF358B5xxxxxxxxxxxxxxxxxxCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A96xxxxxxxxxxxxxxxxxxxxxxxxxxxxx4DD5
ecmwhitelist = 1843:89
detect = cd
mhz = 450
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,2,0
auprovid = 003411

[reader]
label = v14
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Spoiler: user

[account]
user = local
pwd = 12121212 #
au = 1
group = 1,2,3,4

[account]
user = Kinder1
pwd = Zimmer01
description = Tina
caid = 098C,1843,0D05
au = 1
expdate = 2017-12-31
group = 1

[account]
user = 12345678
pwd = Zimmer02
description = Beate + Bärbel
caid = 098C,1843,0D05
expdate = 2019-12-31
group = 1,3

Spoiler: O. Services

######## Sky Services zum Erlauben oder Verbieten der Sender, muessen laufend aktualisiert werden #############
#
# Services Sky Komplett incl. HD, ohne BM und Select !!!
#
# Sky Services für Kabelanbieter sind zur Vereinfachung die gleichen wie bei Sat, auch wenn im Kabel etliche Sender nicht vorhanden sind
# für Kabelanbieter oder einzelne Sky Abos Services selbst erstellen
#

# [sky_v13]
# caid = 09C4
# provid =
# srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0024,002A,0032,0034,00A8,0206,0011,0021,0023,0025,0026,0038,0027,2EFE,0039,4462,700A,125D,1485,0FDA,0070,0071,0082,0084,007C,0076,0086,007B,007D,007E,007F,0080,0065,006C,006A,0087,008A,0089,0088,0008,0009,000A,000B,0014,0019,0029,002B,0203,0204,0022,0074,006B,006F,0083,006E,0073,001E,00DD,00DE,0107,0111,011B,0125,012F,0139,0143,014D,00FD,006D,0081,0072,010C,0116,0120,012A,0134,013E,0148,0152,0102,007A,0077,010E,0118,0122,012C,0136,0140,014A,0154,0104,0135,00DF,0106,0110,011A,0124,012E,0138,0142,014C,00FC,0066,0069,010B,0115,011F,0129,0133,013D,0147,0151,0101,0075,325F,0191,008C

# [sky_v14]
# caid = 098C
# provid =
# srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0024,002A,0032,0034,00A8,0206,0011,0021,0023,0025,0026,0038,0027,2EFE,0039,4462,700A,125D,1485,0FDA,0070,0071,0082,0084,007C,0076,0086,007B,007D,007E,007F,0080,0065,006C,006A,0087,008A,0089,0088,0008,0009,000A,000B,0014,0019,0029,002B,0203,0204,0022,0074,006B,006F,0083,006E,0073,001E,00DD,00DE,0107,0111,011B,0125,012F,0139,0143,014D,00FD,006D,0081,0072,010C,0116,0120,012A,0134,013E,0148,0152,0102,007A,0077,010E,0118,0122,012C,0136,0140,014A,0154,0104,0135,00DF,0106,0110,011A,0124,012E,0138,0142,014C,00FC,0066,0069,010B,0115,011F,0129,0133,013D,0147,0151,0101,0075,325F,0191,008C

= 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0024,002A,0032,0034,00A8,0206,0011,0021,0023,0025,0026,0038,0027,2EFE,0039,4462,700A,125D,1485,0FDA,0070,0071,0082,0084,007C,0076,0086,007B,007D,007E,007F,0080,0065,006C,006A,0087,008A,0089,0088,0008,0009,000A,000B,0014,0019,0029,002B,0203,0204,0022,0074,006B,006F,0083,006E,0073,001E,00DD,00DE,0107,0111,011B,0125,012F,0139,0143,014D,00FD,006D,0081,0072,010C,0116,0120,012A,0134,013E,0148,0152,0102,007A,0077,010E,0118,0122,012C,0136,0140,014A,0154,0104,0135,00DF,0106,0110,011A,0124,012E,0138,0142,014C,00FC,0066,0069,010B,0115,011F,0129,0133,013D,0147,0151,0101,0075,325F,0191,008C

[sky_um02]
caid = 1838
provid =
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0024,002A,0032,0034,00A8,0206,0011,0021,0023,0025,0026,0038,0027,2EFE,0039,4462,700A,125D,1485,0FDA,0070,0071,0082,0084,007C,0076,0086,007B,007D,007E,007F,0080,0065,006C,006A,0087,008A,0089,0088,0008,0009,000A,000B,0014,0019,0029,002B,0203,0204,0022,0074,006B,006F,0083,006E,0073,001E,00DD,00DE,0107,0111,011B,0125,012F,0139,0143,014D,00FD,006D,0081,0072,010C,0116,0120,012A,0134,013E,0148,0152,0102,007A,0077,010E,0118,0122,012C,0136,0140,014A,0154,0104,0135,00DF,0106,0110,011A,0124,012E,0138,0142,014C,00FC,0066,0069,010B,0115,011F,0129,0133,013D,0147,0151,0101,0075,325F,0191,008C


[sky_select]
caid = 1702,1722,1833,1834,1835,1838,09C4,09C7,098C,098E
provid = 000000,000001,000003
srvid = 0012,00FB,0105,010F,0119,0123,012D,0137,0141,014B,00FE,014E,0078,000F


[v13hdplus]
caid = 09C4
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,1581,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,277E,2E9B,151A,157F,EF78,157C,2774,2EAF,2777

[v14hdplus]
caid = 098C
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,1581,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,277E,2E9B,151A,157F,EF78,157C,2774,2EAF,2777

[hd01]
caid = 1830
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,1581,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,277E,2E9B,151A,157F,EF78,157C,2774,2EAF,2777

[hd02]
caid = 1843
provid = 000000,003411,008011
srvid = EF10,EF11,EF14,1581,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,277E,2E9B,151A,157F,EF78,157C,2774,2EAF,2777

[orfcw]
caid = 0648,0D95,0D98
provid = 000000,000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC,33FA,33FB,33FC,33FD,33F5,33F6,33F7,33F8,33F9,1334

[orfice]
caid = 0648,0650
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC,33FA,33FB,33FC,33FD,33F5,33F6,33F7,33F8,33F9,1334

[plusaustria]
caid = 0648,0D95
provid = 000000,000004,000010
srvid = 003E,003B,2EFE,125D,4462,6FEE,6FEF,6FF0,6FF3,6FFF,14B4,14B5,14B6,14B7,0025,3262,0FDA


[kombiaustria]
caid = 0648
provid = 000000
srvid = 14B7,14B4,2E87,2EA5,14B5,2E91,14B6,527E,1589,527D,2B01,125D,4462,0025,2EFE,6FEF,6FF3,6FEE,6FFF,6FF0,003B,152D,3251,3252,3253,0FDA


[keyserver]
caid = 0D05
provid =
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC,125D,4462,0025,1485,2EFE,6FEF,6FF3,6FEE,6FFF,6FF0,325F

# Viaccess 2.6 / Viaccess 4.0
[srgssr]
caid = 0500
provid = FFF430,023800,040810,040820,040830
srvid = 038F,0385,4331,038B,4332,36B8,4334,36B2,4333,36B3,36E3,36B9,03B7,1260
# Viaccess 5
[srgssr]
caid = 0500
provid = 050800,050810
srvid = 038F,0385,4331,038B,4332,36B8,4334,36B2,4333,36B3,36E3,36B9,03B7,1260

Spoiler: O. dvbabi

P: 0500:023800
P: 0D05
P: 1843
P: 098C
P: 0d95
P: 098E,1838,1850
P: 0159,0163,016D,0075
P: 098E,1722,1831,1835,1838,1850
### I: 0 ####
P: 0500:043800 # Pimpercard
P: 0500:050F00 # Pimpercard
P: 0500:FFF8F0 # Pimpercard
P: 0500:000000 # Pimpercard

 

[Derek Buegel]

Wechsle mal sci0 und sci1.
Habe mal gelesen, das es manchmal vorkommt, das die Kartenleser sich vertauscht haben.

MfG

 

[Smile0304]

wo steht der Eintrag bitteß

 

[Derek Buegel]

Spoiler

device = /dev/sci1

Mal mit 0 versuchen oder die karte ohne Änderung im anderen Slot testen.

MfG

 

[Smile0304]

Habe ich schon gemacht, bleibt dunkel.

Habe DM 800 HD mit CCCAM da läut sie ohne Probleme.

Karte war abgelaufen in der Box VU+, und heute wieder Aktiviert.

Image ist OpenPli 4.0 lief die letzten 2 Jahre alles ohne Probleme.
Erst seit Karte abgelaufen war, kamen die Probleme.

Wäre nett wenn da mal jemand drüber schauen kann, der mehr Erfahrung hat ich.

Danke....

 

[liwool]

Wird die Karte korrekt eingelesen ?
Card OK 1 enti?

 

[Smile0304]

Nein leider nicht, wird nicht erkannt. Steht nur error steht dort. Wenn ich aber eine andere Karte in den Schacht schiebe dann wird die Karte erkannt.

 

[liwool]

Poste doch mal das log wenn die Karte eingelesen wird