HD01 Karte ERROR No Entitlements

[x00x]

AW: HD01 Karte ERROR No Entitlements

Ich habe es nochmal versucht und bin folgendermaßen vorgegangen und beim einbinden jeder Karte oscam gestoppt und wieder gestartet:

1830 eingebunden - erkannt und läuft
Bis das Bild hell wird kann es bis zu 1 Minute dauern

09C4 eingebunden - erkannt und läuft
Bekommt kleine Freezer und läuft zwischen 400 und 900 ms ( Freetzer kommen ab ca. 650 ms )

0B01 eingebunden - erkannt und läuft
Keine Probleme


Wie bekomm ich nun alles flüssig ans laufen?

Hier meine oscam.server:

Spoiler

[reader]label = hd+
protocol = smartreader
device = Serial:Reader xxx
caid = 1830
boxkey = A7xxx7C
rsakey = BFxxxD5
ecmwhitelist = 1830:92
detect = cd
mhz = 600
cardmhz = 368
group = 3
emmcache = 1,2,1
blockemm-unknown = 1
lb_weight = 300


[reader]
label = s*y
protocol = smartreader
device = Serial:Reader xxx
caid = 09C4
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 500
group = 2
emmcache = 1,1,2


[reader]
label = nc+
protocol = smartreader
device = Serial:Reader xxx
caid = 0B01
rsakey = xxx
detect = cd
ident = 0B01:000000
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

 

[bombadil]

AW: HD01 Karte ERROR No Entitlements

Hi,

schraube die Zeiten bei der Sky Karte runter

ins7e11 = 15
ndsversion = 2

Die Zeiten sollten dann bei 130ms liegen und die Karte kann dann mehr als ein ECM zur Zeit bearbeiten.


Grüße
Bombadil

 

[x00x]

AW: HD01 Karte ERROR No Entitlements

Beim ersten Anlauf wurde die garnicht hell. Habs nochmal versucht und bekomme jetzt 200 - 354 ms - läuft flüssig - Danke

Wie bekomm ich auch noch die HD01 Karte flüssig ans laufen?

EDIT: zu früh gefreut. Reader hat neugestartet und bekommt wieder 518 - 1024 ms

 

[bombadil]

AW: HD01 Karte ERROR No Entitlements

Hi,

poste bitte ein Log, wo die V13 eingelesen wird.


Grüße
Bombadil

 

[x00x]

AW: HD01 Karte ERROR No Entitlements

Spoiler

2014/04/21 16:02:34 552ED0 r skyv13 [smartreader] Reader initialized (device=Serial:Reader xxx, detect=cd, mhz= AUTO, cardmhz=480)
2014/04/21 16:02:41 552ED0 r skyv13 [smartreader] Card type: P1TV
2014/04/21 16:02:41 552ED0 r skyv13 [smartreader] Rom version: 10A7
2014/04/21 16:02:43 552ED0 r skyv13 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/04/21 16:02:43 552ED0 r skyv13 [smartreader] found card system videoguard2
2014/04/21 16:02:43 552ED0 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/04/21 16:02:43 552ED0 r skyv13 [videoguard2] card detected

Karte wurde zwar eingelesen wird aber nicht hell.
Nach einigen neustarts wird die Karte irgendwann mal hell.
Ist aber erst seitdem ich

ins7e11                       = 15
ndsversion                    = 2

eingefügt habe

 

[bombadil]

AW: HD01 Karte ERROR No Entitlements

Hi,

werden keine Entitlements ausgelesen? Ändere mal den Wert von 15 auf 14.

Grüße
Bombadil

 

[dodo83]

AW: HD01 Karte ERROR No Entitlements

2014/04/21 16:02:34 552ED0 r skyv13 [smartreader] Reader initialized (device=Serial:Reader xxx, detect=cd, mhz= AUTO, cardmhz=480)

die cardmhz für NDS karten ist 357, so sollte es auch im reader eingetragen sein
autospeed eventuell ausschalten

 

[x00x]

AW: HD01 Karte ERROR No Entitlements

Entitlements werden ausgelesen.
MHZ Einstellung war auf 500. Habe diese nun auf 357 gestellt.

Wer habe ich nun auf 14 gestellt.

Wird nicht hell

EDIT: Sobald ich den Eintrag rausnehme bekomme ich es sofort hell und raten von 400 - 800 ms

 

[dodo83]

AW: HD01 Karte ERROR No Entitlements

welche oscam version läuft?

 

[x00x]

AW: HD01 Karte ERROR No Entitlements

OSCAM 1.20-NFR-unstable_svn build r9053

 

[dodo83]

AW: HD01 Karte ERROR No Entitlements

kannst/hast du eventuell einen anderen Reader zum testen (Easymouse, Apollo) ?
wie ist der Smargo eingestellt?

läuft das jetzt nur ohne ins7e11 eintrag?

 

[x00x]

AW: HD01 Karte ERROR No Entitlements

Ich habe noch Easymouse 2 da die wird aber nicht erkannt obwohl die SN richtig eingegeben wurde.
Smargo läuft mit Fixed | 3,69 | Normal | T=0 | 0

Ja, es läuft ohne den ins7e11 Eintrag aber mit leichten Freezern.

Ich hatte das alle vorher mit Mouse protokol mit Easymouse am laufen und da bekomm ich ganz selten Freezer über ca. 10 Sekunden seit neuestem.
Dafür wurde dort die HD01 Karte garnicht erkannt

 

[dodo83]

AW: HD01 Karte ERROR No Entitlements

probier mal mit ins7e11 eintrag und mhz leer lassen

Spoiler

[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = s*y[/COLOR]
[COLOR=#333333]protocol = smartreader[/COLOR]
[COLOR=#333333]device = Serial:Reader xxx[/COLOR]
[COLOR=#333333]caid = 09C4[/COLOR]
[COLOR=#333333]boxid = 12345678[/COLOR]
[COLOR=#333333]detect = cd[/COLOR]
[COLOR=#333333]mhz = [/COLOR]
[COLOR=#333333]cardmhz = 357[/COLOR]
[COLOR=#333333]group = 2[/COLOR]
[COLOR=#333333]emmcache = 1,1,2
[/COLOR]ins7e11 = 15
ndsversion = 2

oscam neu starten und log (komplett vom einlesen) posten

würde dann die Easymouse für die V13 nehmen, über das mouse protokoll einbinden, per Serial geht es da nicht, per /dev/ttyUSBX oder UDEV regel

 

[x00x]

AW: HD01 Karte ERROR No Entitlements

Spoiler

2014/04/21 16:41:03 0 s >> OSCam << cardserver started, version 1.20-NFR-unstable_svn, build r9053 (mipsel-linux-uclibc-libusb)
2014/04/21 16:41:03 0 s creating pidfile /var/run/oscam.pid with pid 32609
2014/04/21 16:41:03 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2014/04/21 16:41:03 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/04/21 16:41:03 0 s signal handling initialized
2014/04/21 16:41:03 0 s 500 service-id's loaded in 28ms
2014/04/21 16:41:03 0 s 116 tier-id's loaded
2014/04/21 16:41:03 0 s 3 provid's loaded
2014/04/21 16:41:03 0 s 22 lengths for caid guessing loaded
2014/04/21 16:41:03 0 s cccam: initialized (fd=7, port=12000)
2014/04/21 16:41:03 0 s hd+ [smartreader] creating thread for device Serial:Reader xxx
2014/04/21 16:41:03 0 s skyv13 [smartreader] creating thread for device Serial:Reader xxx
2014/04/21 16:41:03 0 s nc+ [smartreader] creating thread for device Serial:Reader xxx
2014/04/21 16:41:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/04/21 16:41:03 0 s waiting for local card init
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] De SR_init
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] De SR_init
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] De SR_init
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] initing smargo type SR
2014/04/21 16:41:03 50E888 h webif: decompressed 54572 bytes back into 155280 bytes
2014/04/21 16:41:03 50E888 h HTTP Server running. ip=0.0.0.0 port=222
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] initing smargo type SR
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] initing smargo type SR
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/04/21 16:41:03 551EE0 r Found reader with serial Reader AE10F45 at 001:026
2014/04/21 16:41:03 551EE0 r Found smartreader device Serial:Reader AE10F45
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] reader type is 1
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] Pthread Wordt gecreeerd
2014/04/21 16:41:03 5501E0 r Found reader with serial Reader xxxat 001:025
2014/04/21 16:41:03 5501E0 r Found smartreader device Serial:Reader xxx
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] reader type is 1
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] clocking for smartreader with smartreader protocol
2014/04/21 16:41:03 551EE0 r nc+ [smartreader] Reader initialized (device=Serial:Reader xxx, detect=cd, mhz= AUTO, cardmhz=369)
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] Pthread Wordt gecreeerd
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] clocking for smartreader with smartreader protocol
2014/04/21 16:41:03 5501E0 r skyv13 [smartreader] Reader initialized (device=Serial:Reader xxx, detect=cd, mhz= AUTO, cardmhz=369)
2014/04/21 16:41:03 50CB88 r Found reader with serial Reader xxxat 001:022
2014/04/21 16:41:03 50CB88 r Found smartreader device Serial:Reader xxx
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] reader type is 1
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] Pthread Wordt gecreeerd
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] clocking for smartreader with smartreader protocol
2014/04/21 16:41:03 50CB88 r hd+ [smartreader] Reader initialized (device=Serial:Reader 1F2FA99, detect=cd, mhz= AUTO, cardmhz=343)
2014/04/21 16:41:04 551EE0 r nc+ [smartreader] card detected
2014/04/21 16:41:04 50CB88 r hd+ [smartreader] card detected
2014/04/21 16:41:04 5501E0 r skyv13 [smartreader] card detected
2014/04/21 16:41:05 551EE0 r nc+ [smartreader] ATR: xxx
2014/04/21 16:41:05 551EE0 r nc+ [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=0
2014/04/21 16:41:05 551EE0 r nc+ [smartreader] Calculated work ETU is 77.50 us reader mhz = 480
2014/04/21 16:41:05 551EE0 r nc+ [smartreader] autospeed = 1
2014/04/21 16:41:05 551EE0 r nc+ [smartreader] Effectif reader settings mhz =480 F= 372 D= 1 N=0 T=0 inv=0 parity=EVEN
2014/04/21 16:41:06 551EE0 r nc+ [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 4.80 MHz (specified in reader->mhz)
2014/04/21 16:41:07 551EE0 r nc+ [smartreader] type: Conax, caid: 0B01, serial: ##########, hex serial: ########, card: v64
2014/04/21 16:41:07 551EE0 r nc+ [smartreader] Providers: 1
2014/04/21 16:41:07 551EE0 r nc+ [smartreader] Provider: 1 Provider-Id: 000000
2014/04/21 16:41:07 551EE0 r nc+ [smartreader] Provider: 1 SharedAddress: ########
2014/04/21 16:41:07 551EE0 r nc+ [smartreader] found card system conax
2014/04/21 16:41:07 551EE0 r nc+ [conax] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/04/21 16:41:08 551EE0 r nc+ [conax] Package: 1, id: 1010, classes: 0108C800, date: 2014/04/01 - 2014/04/30, name: ITI Neovision
2014/04/21 16:41:08 551EE0 r nc+ [conax] Package: 2, id: 1010, classes: 0100203E, date: 2013/05/01 - 2013/05/31, name: ITI Neovision
2014/04/21 16:41:08 551EE0 r nc+ [conax] Package: 3, id: 1050, classes: 01002000, date: 2014/04/01 - 2014/04/30, name: ITI 2 Neovision
2014/04/21 16:41:08 551EE0 r nc+ [conax] Package: 4, id: 1050, classes: 01000020, date: 2012/04/01 - 2012/04/30, name: ITI 2 Neovision
2014/04/21 16:41:08 5501E0 r skyv13 [smartreader] ATR: xxx
2014/04/21 16:41:08 5501E0 r skyv13 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/04/21 16:41:08 5501E0 r skyv13 [smartreader] Calculated work ETU is 77.50 us reader mhz = 480
2014/04/21 16:41:08 5501E0 r skyv13 [smartreader] autospeed = 1
2014/04/21 16:41:08 5501E0 r skyv13 [smartreader] Effectif reader settings mhz =480 F= 372 D= 1 N=3 T=0 inv=1 parity=ODD
2014/04/21 16:41:08 551EE0 r nc+ [conax] Package: 5, id: 1060, classes: 01020000, date: 2014/04/01 - 2014/04/30, name: Contego 1
2014/04/21 16:41:08 551EE0 r nc+ [conax] Package: 6, id: 1060, classes: 00000000, date: 1990/01/01 - 1990/01/01, name: Contego 1
2014/04/21 16:41:08 551EE0 r nc+ [conax] ready for requests
2014/04/21 16:41:08 50CB88 r hd+ [smartreader] ATR: xxx
2014/04/21 16:41:08 50CB88 r hd+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/04/21 16:41:08 50CB88 r hd+ [smartreader] Calculated work ETU is 6.67 us reader mhz = 480
2014/04/21 16:41:08 50CB88 r hd+ [smartreader] autospeed = 1
2014/04/21 16:41:08 50CB88 r hd+ [smartreader] Effectif reader settings mhz =480 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2014/04/21 16:41:08 5501E0 r skyv13 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 4.80 MHz (specified in reader->mhz)
2014/04/21 16:41:09 50CB88 r hd+ [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 4.80 MHz (specified in reader->mhz)
2014/04/21 16:41:09 50CB88 r hd+ [smartreader] Card responded ok for ifsd request of 251
2014/04/21 16:41:10 50CB88 r hd+ [smartreader] detect native nagra card
2014/04/21 16:41:10 5501E0 r skyv13 [smartreader] Card type: P1TV
2014/04/21 16:41:10 5501E0 r skyv13 [smartreader] Rom version: 10A7
2014/04/21 16:41:12 5501E0 r skyv13 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/04/21 16:41:12 5501E0 r skyv13 [smartreader] found card system videoguard2
2014/04/21 16:41:12 5501E0 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/04/21 16:41:12 5501E0 r skyv13 [videoguard2] card detected
2014/04/21 16:41:12 5501E0 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/04/21 16:41:12 5501E0 r skyv13 [smartreader] Doing fast reset
2014/04/21 16:41:13 5501E0 r skyv13 [smartreader] ATR: xxx
2014/04/21 16:41:13 5501E0 r skyv13 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=3
2014/04/21 16:41:13 5501E0 r skyv13 [smartreader] Calculated work ETU is 4.84 us reader mhz = 480
2014/04/21 16:41:13 5501E0 r skyv13 [smartreader] autospeed = 1
2014/04/21 16:41:13 5501E0 r skyv13 [smartreader] Effectif reader settings mhz =480 F= 372 D= 16 N=3 T=0 inv=1 parity=ODD
2014/04/21 16:41:13 5501E0 r skyv13 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 4.80 MHz (specified in reader->mhz)
2014/04/21 16:41:15 5501E0 r skyv13 [smartreader] Card type: P1TV
2014/04/21 16:41:15 5501E0 r skyv13 [smartreader] Rom version: 10A7
2014/04/21 16:41:15 50CB88 r hd+ [smartreader] found card system nagra
2014/04/21 16:41:15 50CB88 r hd+ [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/04/21 16:41:15 50CB88 r hd+ [nagra] ROM: D N A S P 1 4 2
2014/04/21 16:41:15 50CB88 r hd+ [nagra] REV: R e v G C 6
2014/04/21 16:41:15 50CB88 r hd+ [nagra] SER: ############
2014/04/21 16:41:15 50CB88 r hd+ [nagra] CAID: 1830
2014/04/21 16:41:15 50CB88 r hd+ [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/04/21 16:41:15 50CB88 r hd+ [nagra] Prv.ID: 00 00 00 00
2014/04/21 16:41:15 50CB88 r hd+ [nagra] IRD ID: ############
2014/04/21 16:41:15 50CB88 r hd+ [nagra] active to: 2014/06/12 12:59
2014/04/21 16:41:16 50CB88 r hd+ [nagra] -----------------------------------------
2014/04/21 16:41:16 50CB88 r hd+ [nagra] |id |tier |valid from |valid to |
2014/04/21 16:41:16 50CB88 r hd+ [nagra] +----+--------+------------+------------+
2014/04/21 16:41:16 50CB88 r hd+ [nagra] |8011|0064 |2013/02/14 |2014/02/15 |
2014/04/21 16:41:16 50CB88 r hd+ [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/04/21 16:41:17 5501E0 r skyv13 [smartreader] parental lock setting: FF FF FF FF
2014/04/21 16:41:17 5501E0 r skyv13 [smartreader] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2014/04/21 16:41:17 5501E0 r skyv13 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/04/21 16:41:17 5501E0 r skyv13 [smartreader] ready for requests
2014/04/21 16:41:17 5501E0 r skyv13 [smartreader] found card system videoguard2
2014/04/21 16:41:17 5501E0 r skyv13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/04/21 16:41:17 5501E0 r skyv13 [videoguard2] card detected
2014/04/21 16:41:17 5501E0 r skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2014/04/21 16:41:17 50CB88 r hd+ [nagra] |8011|0BEA |2014/02/14 |2015/03/22 |
2014/04/21 16:41:17 5501E0 r skyv13 [videoguard2] tier: 2712, expiry date: 2013/07/29-01:01:00
2014/04/21 16:41:17 5501E0 r skyv13 [videoguard2] tier: d758, expiry date: 2013/07/03-01:01:04
2014/04/21 16:41:17 50CB88 r hd+ [nagra] -----------------------------------------
2014/04/21 16:41:17 50CB88 r hd+ [nagra] ready for requests
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 0056, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 0057, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 0058, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 005a, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 005d, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 005e, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:33 5501E0 r skyv13 [videoguard2] tier: 0065, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 0066, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 0067, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 0068, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 0069, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 006a, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 006b, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:34 5501E0 r skyv13 [videoguard2] tier: 006c, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 006d, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 006e, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 006f, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 007b, expiry date: 2014/06/07-01:01:00 Sky Action HD
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 007d, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 0081, expiry date: 2014/06/07-01:01:00 Sky Sport HD1
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 008e, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:35 5501E0 r skyv13 [videoguard2] tier: 00c0, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00c7, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00c8, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00c9, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00ca, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00cb, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00f3, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:36 5501E0 r skyv13 [videoguard2] tier: 00fa, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:37 5501E0 r skyv13 [videoguard2] tier: 00ff, expiry date: 2014/06/07-01:01:00
2014/04/21 16:41:58 0 s init for all local cards done
2014/04/21 16:41:58 0 s anti cascading disabled
2014/04/21 16:41:58 564458 c anonymous disconnected from 192.200.0.20
2014/04/21 16:41:58 0 --- Skipped 1 duplicated log lines ---
2014/04/21 16:41:58 56D030 c anonymous disconnected from 192.200.0.30
2014/04/21 16:41:58 56ED30 c anonymous disconnected from 192.200.0.20
2014/04/21 16:41:58 570A30 c anonymous disconnected from 192.200.0.30
2014/04/21 16:41:58 572730 c anonymous disconnected from 192.200.0.20
2014/04/21 16:41:58 574430 c anonymous disconnected from 192.200.0.30
2014/04/21 16:42:02 0 --- Skipped 1 duplicated log lines ---
2014/04/21 16:42:02 580560 c encrypted cccam-client 192.200.0.20 granted (dm7020, au=auto (3 reader))
2014/04/21 16:42:02 583418 c encrypted cccam-client 192.200.0.30 granted (dm800, au=auto (3 reader))

Nach ca. 5 Minuten wurde die Karte mit 750ms hell

 

[bombadil]

AW: HD01 Karte ERROR No Entitlements

Hi,

poste bitte das Log noch einmal mit den ATRs, die sind nichts geheimnisvolles. Da können wir sehen, ob der Fast Mode läuft.

Grüße
Bombadil