gelöst HD01 in Easymouse an der Fritte äuft nicht mehr

molto11 · 30. Januar 2020

hallo,
v14 ist raus. ich habe nur noch HD01. jetzt bekomme ich die Fehlermeldung.
(reader) hd01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
Reader +Karte wird erkannt
Ich nutze Fritz7390 oscam
easymouse
dreamhd800se

(main) Machine = mips
2020/01/30 07:45:15 00000000 s (main) creating pidfile /var/media/ftp/uStor01/cs/oscam/log/oscam.pid with pid 19831
2020/01/30 07:45:15 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2020/01/30 07:45:15 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2020/01/30 07:45:15 00000000 s (main) signal handling initialized
2020/01/30 07:45:15 00000000 s (net) monitor: initialized (fd=5, port=988)
2020/01/30 07:45:15 00000000 s (net) cccam: initialized (fd=6, port=12000)
2020/01/30 07:45:15 1B310DB1 h (webif) webif: decompressed 177577 bytes back into 435684 bytes
2020/01/30 07:45:15 1B310DB1 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2020/01/30 07:45:15 00000000 s (reader) hd01 [mouse] creating thread for device /dev/ttyUSB0
2020/01/30 07:45:15 00000000 s (main) waiting for local card init
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 81599
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 1 value e1 time_us 3140
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 2 value f0 time_us 15859
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 3 value ed time_us 16206
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 4 value ff time_us 14962
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 5 value e0 time_us 15635
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 6 value ed time_us 11249
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 7 value ef time_us 14688
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 8 value ec time_us 15695
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 9 value f0 time_us 18732
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 10 value f6 time_us 30666
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 11 value ff time_us 15652
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 12 value fe time_us 15640
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 13 value f2 time_us 15658
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 14 value ee time_us 20446
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 15 value e4 time_us 27845
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 16 value fc time_us 15595
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 17 value ed time_us 15639
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 18 value ed time_us 15734
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 19 value e5 time_us 31929
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 20 value ef time_us 15310
2020/01/30 07:45:15 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 21 value f4 time_us 15624
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 22 value ee time_us 12727
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 23 value f4 time_us 31555
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 24 value e6 time_us 15673
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 25 value e6 time_us 15671
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 26 value f5 time_us 13756
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Flush readed byte Nr 27 value ee time_us 31621
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Buffers readed 27 bytes total time_us 567673
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=360, cardmhz=600)
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] card detected
2020/01/30 07:45:16 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75262
2020/01/30 07:45:18 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75225
2020/01/30 07:45:19 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75253
2020/01/30 07:45:21 288B4864 r (reader) hd01 [mouse] Error activating card.
2020/01/30 07:45:22 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75715
2020/01/30 07:45:23 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75234
2020/01/30 07:45:25 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75466
2020/01/30 07:45:26 288B4864 r (reader) hd01 [mouse] Error activating card.
2020/01/30 07:45:27 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75297
2020/01/30 07:45:29 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75251
2020/01/30 07:45:30 288B4864 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75265
2020/01/30 07:45:32 288B4864 r (reader) hd01 [mouse] Error activating card.
2020/01/30 07:45:32 288B4864 r (reader) hd01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2020/01/30 07:45:32 288B4864 r (reader) hd01 [mouse] card initializing error
2020/01/30 07:45:33 00000000 s (main) init for all local cards done
2020/01/30 07:45:33 00000000 s (emmcache) loaded 54 emmcache records from /mod/external/mod/etc/conf/oscam.config/oscam.emmcache in 4 ms
2020/01/30 07:45:33 00000000 s (emmcache) loaded 0 emmstat records from /mod/external/mod/etc/conf/oscam.config/oscam.emmstat in 1 ms
2020/01/30 07:45:33 00000000 s (anticasc) anti cascading disabled

Smiley007 · 30. Januar 2020

DIP Schalter auf 5V gestellt und die Fritte neu gestartet?

molto11 · 30. Januar 2020

Ja, ist auf 5v und 6 hz gesetzt

waves · 30. Januar 2020

molto11 schrieb:
6 hz gesetzt

Denke, das soll mHz heißen.....

Du hast in Deinen Configs aber

mHz = 360

Also auch die Easymouse so einstellen, oder unter

mHz = 600

eintragen......

molto11 · 30. Januar 2020

ich habe jetzt beide Werte auf 600 gesetzt
reader) hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
Fehler ist trotzdem da

(reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
(reader) hd01 [mouse] Setting baudrate to 187500 bps
(reader) hd01 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
(reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75301
(reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
(reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
(reader) hd01 [mouse] card system not supported
(reader) hd01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
(reader) hd01 [mouse] card initializing error
(main) init for all local cards done
(emmcache) loaded 54 emmcache records from /mod/external/mod/etc/conf/oscam.config/oscam.emmcache in 5 ms

Pilot · 30. Januar 2020

Fritzbox stromlos machen und neu booten
Wichtig nach jeder reader Änderung

waves · 31. Januar 2020

Bevor wir hier jetzt weiter ins Blaue raten......das hier lesen, entsprechend posten, und dann schauen wir weiter:

Wie Poste ich im OScam Bereich richtig

Hallo Zusammen, leider kam es in der Vergangenheit immer wieder dazu, dass sich Leute nicht richtig aritkulieren konnten. Daher möchten wir euch auf diesem Wege mal zeigen, welche Informationen eure Post von Problemen, Fragen etc. enthalten sollten. Aber bevor ihr hier eine Frage zum x-ten mal...

www.digital-eliteboard.com

Poste dazu ergänzend auch noch die Schalterstellungen der Easymouse.

molto11 · 31. Januar 2020

5v, Phönix, unten, 6mhz

läuft immer noch nicht.
Reader ist wie oben beschrieben geschaltet
folgende Fehlermeldung in livelog

2020/02/01 13:17:41 00000000 s (main) System name = Linux
2020/02/01 13:17:41 00000000 s (main) Host name = fritz.fonwlan.box
2020/02/01 13:17:41 00000000 s (main) Release = 2.6.28.10
2020/02/01 13:17:41 00000000 s (main) Version = #1 Fri Jun 27 19:15:37 CEST 2014
2020/02/01 13:17:41 00000000 s (main) Machine = mips
2020/02/01 13:17:41 00000000 s (main) creating pidfile /var/media/ftp/uStor01/cs/oscam/log/oscam.pid with pid 7590
2020/02/01 13:17:41 00000000 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2020/02/01 13:17:41 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2020/02/01 13:17:41 00000000 s (main) signal handling initialized
2020/02/01 13:17:41 00000000 s (net) monitor: initialized (fd=5, port=988)
2020/02/01 13:17:41 00000000 s (net) cccam: initialized (fd=6, port=12000)
2020/02/01 13:17:41 34016BD2 h (webif) webif: decompressed 177577 bytes back into 435684 bytes
2020/02/01 13:17:41 34016BD2 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2020/02/01 13:17:41 00000000 s (reader) hd01 [mouse] creating thread for device /dev/ttyUSB0
2020/02/01 13:17:41 00000000 s (main) waiting for local card init
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75250
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 1 value 03 time_us 12369
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 2 value 00 time_us 15404
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 3 value 56 time_us 15263
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 4 value ff time_us 15442
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 5 value 00 time_us 15252
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 6 value 76 time_us 15489
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 7 value 7e time_us 15151
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 8 value 71 time_us 15095
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 9 value 80 time_us 15527
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 10 value 1d time_us 16157
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 11 value ff time_us 14428
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 12 value dd time_us 15277
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 13 value 8d time_us 31378
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 14 value 7d time_us 15306
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 15 value 35 time_us 15596
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 16 value f5 time_us 14938
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 17 value 73 time_us 31424
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 18 value d3 time_us 15286
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 19 value b3 time_us 15400
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 20 value fb time_us 15391
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 21 value b5 time_us 15175
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 22 value 59 time_us 31485
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 23 value 91 time_us 15338
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 24 value 1d time_us 15191
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 25 value 3d time_us 15493
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 26 value 93 time_us 15392
2020/02/01 13:17:41 17D6EC72 r (reader) hd01 [mouse] Flush readed byte Nr 27 value 79 time_us 31390
2020/02/01 13:17:42 17D6EC72 r (reader) hd01 [mouse] Buffers readed 27 bytes total time_us 569014
2020/02/01 13:17:42 17D6EC72 r (reader) hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2020/02/01 13:17:42 17D6EC72 r (reader) hd01 [mouse] card detected
2020/02/01 13:17:42 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75836
2020/02/01 13:17:44 17D6EC72 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2020/02/01 13:17:44 17D6EC72 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/02/01 13:17:44 17D6EC72 r (reader) hd01 [mouse] Setting baudrate to 187500 bps
2020/02/01 13:17:44 17D6EC72 r (reader) hd01 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2020/02/01 13:17:44 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75502
2020/02/01 13:17:44 17D6EC72 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
2020/02/01 13:17:45 17D6EC72 r (reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
2020/02/01 13:17:46 17D6EC72 r (reader) hd01 [mouse] detect native nagra card
2020/02/01 13:17:47 17D6EC72 r (reader) hd01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2020/02/01 13:17:48 17D6EC72 r (reader) hd01 [mouse] T1 Resync command error, trying to reactivate!
2020/02/01 13:17:48 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75286
2020/02/01 13:17:49 17D6EC72 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2020/02/01 13:17:49 17D6EC72 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/02/01 13:17:49 17D6EC72 r (reader) hd01 [mouse] Setting baudrate to 187500 bps
2020/02/01 13:17:49 17D6EC72 r (reader) hd01 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2020/02/01 13:17:49 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75322
2020/02/01 13:17:49 17D6EC72 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
2020/02/01 13:17:50 17D6EC72 r (reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
2020/02/01 13:17:51 17D6EC72 r (reader) hd01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2020/02/01 13:17:52 17D6EC72 r (reader) hd01 [mouse] T1 Resync command error, trying to reactivate!
2020/02/01 13:17:52 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75299
2020/02/01 13:17:54 17D6EC72 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2020/02/01 13:17:54 17D6EC72 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/02/01 13:17:54 17D6EC72 r (reader) hd01 [mouse] Setting baudrate to 187500 bps
2020/02/01 13:17:54 17D6EC72 r (reader) hd01 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2020/02/01 13:17:54 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75505
2020/02/01 13:17:54 17D6EC72 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
2020/02/01 13:17:55 17D6EC72 r (reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
2020/02/01 13:17:55 17D6EC72 r (reader) hd01 [mouse] card system not supported
2020/02/01 13:17:55 17D6EC72 r (reader) hd01 [mouse] Normal mode failed, reverting to Deprecated Mode
2020/02/01 13:17:55 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75299
2020/02/01 13:17:56 17D6EC72 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2020/02/01 13:17:56 17D6EC72 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/02/01 13:17:56 17D6EC72 r (reader) hd01 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2020/02/01 13:17:57 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75295
2020/02/01 13:17:57 17D6EC72 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
2020/02/01 13:17:57 17D6EC72 r (reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
2020/02/01 13:17:58 17D6EC72 r (reader) hd01 [mouse] detect native nagra card
2020/02/01 13:17:59 17D6EC72 r (reader) hd01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2020/02/01 13:18:00 17D6EC72 r (reader) hd01 [mouse] T1 Resync command error, trying to reactivate!
2020/02/01 13:18:01 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 103263
2020/02/01 13:18:02 17D6EC72 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2020/02/01 13:18:02 17D6EC72 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/02/01 13:18:02 17D6EC72 r (reader) hd01 [mouse] Setting baudrate to 187500 bps
2020/02/01 13:18:02 17D6EC72 r (reader) hd01 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2020/02/01 13:18:02 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75362
2020/02/01 13:18:02 17D6EC72 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
2020/02/01 13:18:03 17D6EC72 r (reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
2020/02/01 13:18:04 17D6EC72 r (reader) hd01 [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2020/02/01 13:18:05 17D6EC72 r (reader) hd01 [mouse] T1 Resync command error, trying to reactivate!
2020/02/01 13:18:05 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75291
2020/02/01 13:18:07 17D6EC72 r (reader) hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2020/02/01 13:18:07 17D6EC72 r (reader) hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2020/02/01 13:18:07 17D6EC72 r (reader) hd01 [mouse] Setting baudrate to 187500 bps
2020/02/01 13:18:07 17D6EC72 r (reader) hd01 [mouse] Calculated work ETU is 5.33 us reader mhz = 600
2020/02/01 13:18:07 17D6EC72 r (reader) hd01 [mouse] Buffers readed 0 bytes total time_us 75296
2020/02/01 13:18:07 17D6EC72 r (reader) hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 6.00 MHz (specified in reader->mhz)
2020/02/01 13:18:08 17D6EC72 r (reader) hd01 [mouse] Warning: Card returned error on setting ifsd value to 251
2020/02/01 13:18:08 17D6EC72 r (reader) hd01 [mouse] card system not supported
2020/02/01 13:18:08 17D6EC72 r (reader) hd01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2020/02/01 13:18:08 17D6EC72 r (reader) hd01 [mouse] card initializing error
2020/02/01 13:18:08 00000000 s (main) init for all local cards done
2020/02/01 13:18:08 00000000 s (emmcache) loaded 54 emmcache records from /mod/external/mod/etc/conf/oscam.config/oscam.emmcache in 7 ms
2020/02/01 13:18:08 00000000 s (emmcache) loaded 0 emmstat records from /mod/external/mod/etc/conf/oscam.config/oscam.emmstat in 0 ms

[reader]
label = V_14
enable = 0
protocol = mouse
device = /dev/ttyUSB1
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:9F
detect = cd
mhz = 360
cardmhz = 369
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
disablecrccws = 1
ndsversion = 2

[reader]
label = hd01
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
boxkey = XX
rsakey = XXX
ecmwhitelist = 1830:92
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2,0
auprovid = 1F1F1F

tem_invictus · 1. Februar 2020

probier mal mit "mhz = 368" und "cardmhz = 368"

Pilot · 1. Februar 2020

molto11 schrieb:
läuft immer noch nicht.

Fritzbox neu gestartet nach den Änderungen?

pehedima · 1. Februar 2020

Die HD01 sollte eigentlich mit 3.57Mhz problemlos laufen.

Also im Server:

Code:

mhz = 357
cardmhz = 357

Mouse Einstellung:

Code:

unten, unten, unten, egal

Danach die gesamte Fritte stromlos machen und alles neu starten.
oscam.log vom oscam start an posten

molto11 · 1. Februar 2020

danke, funktioniert!
ist es möglich die Karte mit samsung tv ohne dreambox zu sharen?

filius00 · 1. Februar 2020

molto11 schrieb:
ohne dreambox zu sharen?

Nein, nicht wahrscheinlich......

molto11 · 1. Februar 2020

kann man das Betriebssystem mit Linux flashen?

filius00 · 1. Februar 2020

Vom TV?

Suche

Suche

gelöst HD01 in Easymouse an der Fritte äuft nicht mehr

molto11

Ist gelegentlich hier

Smiley007

molto11

Ist gelegentlich hier

waves

molto11

Ist gelegentlich hier

Pilot

waves

Wie Poste ich im OScam Bereich richtig

molto11

Ist gelegentlich hier

tem_invictus

Premium

Pilot

pehedima

molto11

Ist gelegentlich hier

filius00

molto11

Ist gelegentlich hier

filius00

Ähnliche Themen

Spenden Unterstützung