Hallo,
ich brauche mal Hilfe zu meiner HD+ Karte die ich über meine Fritzbox auslesen möchte. Wahscheinlich mache ich etwas grundsätzich falsch, da all meine bisherigen Eistellungen nicht zielführend waren.
Vielleicht hat jemand einen Tip für mich. Das wäre schöen.
Hier meine Hardware:
Fritzbox 7170
Aktiver Hama High Speed HUB
Phoenix Smartreader+
HD+ (weiß) HD01
Kathrein UFS910
Hier meine Einstellungen:
Kathrein 910UFS:
AAF 2.0e
Enigma2 (Hot-Summer-Image)
newcamd.list:
CWS = 192.168.178.3 15001 xxxx yyyy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Fritzbox 7170:
onestep.cc_7170_04.80freetz-devel-6479M.de_20110129-023130.image
onestep.cc_7170_04.80freetz-devel-6479M.de_20110129-023130.external
OSCam Config:
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = var/media/ftp/uStor01/emu/oscam/oscam.log
Level = 15
CacheDelay = 120
[monitor]
port = 988
aulow = 120
monlevel = 1
httpport = 83
httprefresh = 10
NoCrypt = 192.168.0.0-192.168.255.255
[newcamd]
key = 0102030405060708091011121314
port = 15001@1830:003411
[webif]
httpport = 83
httpuser =
httppwd =
httpcss = /var/media/ftp/uStor01/emu/oscam//bluestyle.css
httptpl =
httpscript =
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httpdyndns =
httphideidleclients = 1
httpreadonly = 0
OSCam User:
[account]
user = xxxx
pwd = yyyy
disabled = 0
expdate =
group = 1,2,3
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = hdplus
services = hdplus
caid = 1702,1833,1830
betatunnel = 1833.FFFF:1702
ident =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty =
OSCam Server:
[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
smargopatch = 1
caid = 1830
rsakey = BF358B5461****5CCA4DD5
boxkey = A764****D37C
detect = cd
mhz = 368
cardmhz = 368
ident = 0000:000000,003411,008011
group = 1
emmcache = 1,3,2
ecmcache = 1
deprecated mode = 1
lb_weight = 100
OSCam Services:
[hdplus]
caid=1830
srvid=EF10,EF11,EF74,EF75,EF76,277E,EF14
[skyfullhd]
caid=1702,1833
srvid=0084,0081,007e,0080,0083,0082,007F,000A,0001 ,000B,002b,0009,0029,001b,002a,000e,0044,003e,18b2 ,000d,000C,0034,0017,0008,0204,0014,0024,0032,4462 ,4461,003c,0298,0043,0010,0206,0016,0203,003f,001d ,3397,3398,0045,0018,0042,0022,0019,001a,700a,001c ,0013,3393,3394,003d,6ff1,00df,0011,00dd,00de,00fd ,014d,0143,0139,012f,0125,011b,0107,0111,016b,0175 ,0035,3331,00a8,3395,7009,6fff,0015,0201,0159,0163 ,016d,0046,00fb,0105,010f,0119,0123,012d,0137,0141 ,014b,0106,0110,011a,0124,012e,0138,0142,014c,0156 ,0160,00fc,0096,0097,0098,0099,009A,009B,009C,007A,007B,007C
[mtvunlimited]
caid=0B00
srvid=6FF3,6FEE,6FEF,6FF1,6FF0,6FFF
[orfcw]
caid=0D05
srvid=132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE ,32CF,32D0,32D1,32D2,32D3,32D4,4E27
[orf]
caid=0D95
srvid=132F,1330,32C9,32CA,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,3332,3335,4E27
[xxx]
caid=0500
srvid=4280,4285,3786,3788,1251,0086,0082,21B8,378F,378D ,378C,36B4,36B6,36B3,36B7,36B5,36B2,36B1,36B8,3792
Für einen guten Tipp wäre ich sehr dankbar.
Gruß
ich brauche mal Hilfe zu meiner HD+ Karte die ich über meine Fritzbox auslesen möchte. Wahscheinlich mache ich etwas grundsätzich falsch, da all meine bisherigen Eistellungen nicht zielführend waren.
Vielleicht hat jemand einen Tip für mich. Das wäre schöen.
Hier meine Hardware:
Fritzbox 7170
Aktiver Hama High Speed HUB
Phoenix Smartreader+
HD+ (weiß) HD01
Kathrein UFS910
Hier meine Einstellungen:
Kathrein 910UFS:
AAF 2.0e
Enigma2 (Hot-Summer-Image)
newcamd.list:
CWS = 192.168.178.3 15001 xxxx yyyy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan oscam
mg_cfg:
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E
time # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }
# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
Fritzbox 7170:
onestep.cc_7170_04.80freetz-devel-6479M.de_20110129-023130.image
onestep.cc_7170_04.80freetz-devel-6479M.de_20110129-023130.external
OSCam Config:
[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = var/media/ftp/uStor01/emu/oscam/oscam.log
Level = 15
CacheDelay = 120
[monitor]
port = 988
aulow = 120
monlevel = 1
httpport = 83
httprefresh = 10
NoCrypt = 192.168.0.0-192.168.255.255
[newcamd]
key = 0102030405060708091011121314
port = 15001@1830:003411
[webif]
httpport = 83
httpuser =
httppwd =
httpcss = /var/media/ftp/uStor01/emu/oscam//bluestyle.css
httptpl =
httpscript =
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httpdyndns =
httphideidleclients = 1
httpreadonly = 0
OSCam User:
[account]
user = xxxx
pwd = yyyy
disabled = 0
expdate =
group = 1,2,3
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = hdplus
services = hdplus
caid = 1702,1833,1830
betatunnel = 1833.FFFF:1702
ident =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty =
OSCam Server:
[reader]
label = hdplus
enable = 1
protocol = mouse
device = /dev/ttyUSB0
services = hdplus
smargopatch = 1
caid = 1830
rsakey = BF358B5461****5CCA4DD5
boxkey = A764****D37C
detect = cd
mhz = 368
cardmhz = 368
ident = 0000:000000,003411,008011
group = 1
emmcache = 1,3,2
ecmcache = 1
deprecated mode = 1
lb_weight = 100
OSCam Services:
[hdplus]
caid=1830
srvid=EF10,EF11,EF74,EF75,EF76,277E,EF14
[skyfullhd]
caid=1702,1833
srvid=0084,0081,007e,0080,0083,0082,007F,000A,0001 ,000B,002b,0009,0029,001b,002a,000e,0044,003e,18b2 ,000d,000C,0034,0017,0008,0204,0014,0024,0032,4462 ,4461,003c,0298,0043,0010,0206,0016,0203,003f,001d ,3397,3398,0045,0018,0042,0022,0019,001a,700a,001c ,0013,3393,3394,003d,6ff1,00df,0011,00dd,00de,00fd ,014d,0143,0139,012f,0125,011b,0107,0111,016b,0175 ,0035,3331,00a8,3395,7009,6fff,0015,0201,0159,0163 ,016d,0046,00fb,0105,010f,0119,0123,012d,0137,0141 ,014b,0106,0110,011a,0124,012e,0138,0142,014c,0156 ,0160,00fc,0096,0097,0098,0099,009A,009B,009C,007A,007B,007C
[mtvunlimited]
caid=0B00
srvid=6FF3,6FEE,6FEF,6FF1,6FF0,6FFF
[orfcw]
caid=0D05
srvid=132F,1330,3332,32C9,32CA,32CB,32CC,32CD,32CE ,32CF,32D0,32D1,32D2,32D3,32D4,4E27
[orf]
caid=0D95
srvid=132F,1330,32C9,32CA,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,3332,3335,4E27
[xxx]
caid=0500
srvid=4280,4285,3786,3788,1251,0086,0082,21B8,378F,378D ,378C,36B4,36B6,36B3,36B7,36B5,36B2,36B1,36B8,3792
Für einen guten Tipp wäre ich sehr dankbar.
Gruß
