HD+ Local, Sky cardsharing wie Oscam einstellen?

[pehedima]

Wir müssen verstehen, warum du zwei Lines hast.
Wenn du nur einen Linegeber hast, brauchst du auch nur eine Line. So einfach ist das.

Daher nochmal die Frage, warum hast du zwei?

 

[Gatzi]

soll die zweite Line für deine HD Karte sein?

 

[Mendel]

Line 2 ist garnicht aktiv das soll heissen da kommst nichts rein. Habs nur nicht rausgelöst.

 

[pehedima]

Dann ersetzt mal die zweite Line mit den folgenden Reader:

Spoiler

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 450
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

Damit bei deiner ext. Line die CAID 1843 nicht weiter angefragt wird, solltest du dort den Parameter CAID einsetzten.

Bei Sky über eine V13

CAID = 09C4

falls V14

CAID = 098C

Danach die gesamte Kiste neu starten (nicht nur oscam!) und die oscam.log vom oscam start an posten.

 

[Gatzi]

Du solltest die mhz Vorgaben an den internen Reader anpassen...[emoji6]

Uups, schon passiert! [emoji106]

Gesendet von iPhone mit Tapatalk

 

[pehedima]

Hätte sicherlich auch ohne die Anpassung gefunzt, aber so ist es bei Nutzung des internen Readers besser.

 

[Gatzi]

autospeed könnte auch noch raus oder?


Gesendet von iPhone mit Tapatalk

 

[pehedima]

Das passt schon. Bei protocol = internal ist autospeed automatisch auf 1.
Aber wir wollen hier den TE ja nicht zusätzlich verwirren.

Er soll das mal so einbauen und die oscam.log posten.

 

[Emperor288]

warum alles so kompliziert? die Karte beim Linegeber einfach aus dem Share nehmen. sollte doch beim "guten Bekannten" kein Problem sein ihn darum zu bitten

 

[Mendel]

Spoiler

Dann ersetzt mal die zweite Line mit den folgenden Reader:

Spoiler

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 450
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

Damit bei deiner ext. Line die CAID 1843 nicht weiter angefragt wird, solltest du dort den Parameter CAID einsetzten.

Bei Sky über eine V13

CAID = 09C4

falls V14

CAID = 098C

Danach die gesamte Kiste neu starten (nicht nur oscam!) und die oscam.log vom oscam start an posten.

oscam.log

Spoiler

2018/05/23 18:47:50 00000000 s (main) Host name = vuuno4kse
2018/05/23 18:47:50 00000000 s (main) Release = 4.1.20-1.9
2018/05/23 18:47:50 00000000 s (main) Version = #1 SMP Fri Mar 2 18:45:30 CET 2018
2018/05/23 18:47:50 00000000 s (main) Machine = armv7l
2018/05/23 18:47:50 00000000 s (main) Stb model = dm8000
2018/05/23 18:47:50 00000000 s (main) Stb vumodel = vuuno4kse
2018/05/23 18:47:50 00000000 s (main) Stb boxtype = vuuno4kse
2018/05/23 18:47:50 00000000 s (main) creating pidfile /tmp/oscam.pid with pid 980
2018/05/23 18:47:50 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2018/05/23 18:47:50 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/05/23 18:47:50 00000000 s (main) signal handling initialized
2018/05/23 18:47:50 00000000 s (reader) hdplus [internal] creating thread for device /dev/sci0
2018/05/23 18:47:50 00000000 s (reader) xxxxxxxx [cccam] creating thread for device xxxxxx
2018/05/23 18:47:50 49BB0A6B r (reader) hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2018/05/23 18:47:50 00000000 s (reader) xxxxxx [cccam] creating thread for device xxxxxx
2018/05/23 18:47:50 49BB0A6B r (reader) hdplus [internal] Reader sci internal, detected box type: vuuno4kse
2018/05/23 18:47:50 00000000 s (reader) xxxxxx [cccam] creating thread for device xxxxxx
2018/05/23 18:47:50 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/05/23 18:47:50 00000000 s (emmcache) loaded 36 emmcache records from /etc/tuxbox/config/oscam.emmcache in 1 ms
2018/05/23 18:47:50 00000000 s (emmcache) loaded 31 emmstat records from /etc/tuxbox/config/oscam.emmstat in 2 ms
2018/05/23 18:47:50 00000000 s (anticasc) anti cascading disabled
2018/05/23 18:47:50 58DBCDF4 c (client) plain dvbapi-client granted (dvbapi_local, au=auto (4 reader))
2018/05/23 18:47:50 69DFD450 h (webif) webif: decompressed 177583 bytes back into 437728 bytes
2018/05/23 18:47:50 58DBCDF4 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2018/05/23 18:47:50 69DFD450 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/05/23 18:47:50 58DBCDF4 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/05/23 18:47:50 462680C4 p (net) can't resolve xxxxxx, error: Temporary failure in name resolution
2018/05/23 18:47:50 462680C4 p (reader) xxxxxx [cccam] proxy initialized, server xxxxxx:17500
2018/05/23 18:47:50 462680C4 p (net) can't resolve xxxxxx, error: Temporary failure in name resolution
2018/05/23 18:47:50 6FACCE16 p (-) -- Skipped 1 duplicated log lines --
2018/05/23 18:47:50 1868AD6B p (reader) xxxxxx [cccam] proxy initialized, server xxxxxx:15600
2018/05/23 18:47:50 1868AD6B p (net) can't resolve xxxxxx, error: Temporary failure in name resolution
2018/05/23 18:47:51 49BB0A6B r (reader) hdplus [internal] card detected
2018/05/23 18:47:52 49BB0A6B r (reader) hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 09 50 31 38 30 20 4D 65 72 30 30 30 28
2018/05/23 18:47:52 49BB0A6B r (reader) hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2018/05/23 18:47:52 49BB0A6B r (reader) hdplus [internal] Calculated work ETU is 7.11 us reader mhz = 450
2018/05/23 18:47:55 49BB0A6B r (reader) hdplus [internal] Buffers readed 0 bytes total time_us 3099845
2018/05/23 18:47:55 49BB0A6B r (reader) hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/05/23 18:47:55 49BB0A6B r (reader) hdplus [internal] Card responded ok for ifsd request of 160
2018/05/23 18:47:56 49BB0A6B r (reader) hdplus [internal] detect native nagra card
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [internal] ready for requests
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [internal] found card system nagra
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] ROM: D N A S P 1 8 0
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] REV: M e r 0 0 0
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] SER: ############
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] CAID: 1843
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] Prv.ID: 00 00 00 00
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] IRD ID: ############
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] active to: 2018/07/14 12:59
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] -----------------------------------------
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] |id |tier |valid from |valid to |
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] +----+--------+------------+------------+
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] |8011|0066 |2018/05/21 |2019/05/22 |
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2018/05/23 18:47:58 49BB0A6B r (reader) hdplus [nagra] -----------------------------------------
2018/05/23 18:48:03 462680C4 p (reader) xxxxxx: resolved ip=xx.xx.xx
2018/05/23 18:48:03 462680C4 p (reader) xxxxxx [cccam] connecting to xxxxxx:17500
2018/05/23 18:48:03 1868AD6B p (reader) xxxxxx: resolved ip=xx.xx.xx
2018/05/23 18:48:03 1868AD6B p (reader) xxxxxx [cccam] connecting to xxxxxx:15600
2018/05/23 18:48:03 6FACCE16 p (reader) xxxxxx: resolved ip=xx.xx.xx
2018/05/23 18:48:11 58DBCDF4 c (-) -- Skipped 1 duplicated log lines --
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CAE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19AE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1EAE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AAE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BAE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 0648 ECM_PID: 18AE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 0650 ECM_PID: 17AE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186A ECM_PID: 1FAE PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 0500 ECM_PID: 1FAF PROVID: 051900
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 9 CAID: 06CB ECM_PID: 020A PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 10 CAID: 186D ECM_PID: 1FB0 PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 11 CAID: 06E2 ECM_PID: 1FB1 PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 ecmpid 12 CAID: 098D ECM_PID: 0508 PROVID: 000000
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 found 13 ECMpids and 7 STREAMpids in caPMT
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19AE ANY CHID PMTPID 0064 VPID 04FF
2018/05/23 18:48:11 58DBCDF4 c (dvbapi) Demuxer 0 found 13 ECMpids and 7 STREAMpids in PMT
2018/05/23 18:48:11 58DBCDF4 c (ecm) dvbapi_local (1843@000000/0000/EF14/89:0015E4266A0DC1E78726AF2F34AB4E71): found (372 ms) by hdplus
2018/05/23 18:48:15 49BB0A6B r (reader) hdplus [nagra] dvbapi_local emmtype=global, len=139 (hex: 0x8B), cnt=3: written (590 ms)
2018/05/23 18:48:16 6FACCE16 p (reader) xxxxxx [cccam] connecting to xxxxxx:12000
2018/05/23 18:48:16 1868AD6B p (reader) xxxxxx [cccam] connecting to xxxxxx:15600
2018/05/23 18:48:16 462680C4 p (reader) xxxxxx [cccam] connecting to xxxxxx:17500
2018/05/23 18:48:16 6FACCE16 p (cccam) cccam(r) xxxxxx: login failed, usr/pwd invalid
2018/05/23 18:48:20 58DBCDF4 c (ecm) dvbapi_local (1843@000000/0000/EF14/89:65D81AD8717012EFEBB3EFD975F34E06): found (365 ms) by hdplus
2018/05/23 18:48:20 49BB0A6B r (reader) hdplus [nagra] dvbapi_local emmtype=global, len=139 (hex: 0x8B), cnt=3: written (577 ms)
2018/05/23 18:48:24 58DBCDF4 c (dvbapi) Demuxer 0 stop descrambling program number EF14 (1843@000000:EF14 unknown)

 

[Gatzi]

sieht so aus als wenn die HD + hell ist, oder?

 

[pehedima]

Setze im hdplus reader noch folgenden Parameter:

blockemm-g = 1

Jetzt sollte das eigentlich passen.

 

[Mendel]

ja



Wo genau ist die stelle?

Spoiler

Sie müssen registriert sein, um Links zu sehen

 

[pehedima]

g = global

 

[Emperor288]

Spoiler

2018/05/23 18:48:16 6FACCE16 p (reader) xxxxxx [cccam] connecting to xxxxxx:12000
2018/05/23 18:48:16 1868AD6B p (reader) xxxxxx [cccam] connecting to xxxxxx:15600
2018/05/23 18:48:16 462680C4 p (reader) xxxxxx [cccam] connecting to xxxxxx:17500
2018/05/23 18:48:16 6FACCE16 p (cccam) cccam(r) xxxxxx: login failed, usr/pwd invalid

der Bekannte versorgt wohl den ganzen Ort.....