Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

HD+ HD02 im Smargo mit Oscam

    Nobody is reading this thread right now.
C

ceulem

Ist gelegentlich hier
Registriert
24. Dezember 2009
Beiträge
60
Reaktionspunkte
12
Punkte
28
Hallo Leute,
ich komme nicht weiter.
Meine HD+ HD02 will einfach nicht in meinem Smargo auf einem Raspberry Pi mit IPC 11.6 und Oscam (r11392) laufen.
Mhz bin ich mittlerweile auch schon alle durch, zuletzt mit Autospeed.
Im selben Reader läuft eine V13 schon Ewigkeiten ohne Probleme. Die HD+ ist Aktiviert und läuft direkt im Receiver mit SCam 2.59 ohne problem.


  • reader) HD+ [smartreader] Reader initialized (device=Serial:Reader 1B12A3C, detect=cd, mhz= AUTO, cardmhz=600)
  • 2017/11/25 23:33:35 01629FCF r (reader) HD+ [smartreader] card detected
  • 2017/11/25 23:33:39 01629FCF r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20
  • 2017/11/25 23:33:39 01629FCF r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/25 23:33:39 01629FCF r (reader) HD+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/25 23:33:39 01629FCF r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/25 23:33:40 01629FCF r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/25 23:33:40 01629FCF r (reader) HD+ [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/25 23:33:41 01629FCF r (reader) HD+ [smartreader] detect native nagra card
  • 2017/11/25 23:33:42 01629FCF r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/25 23:33:42 01629FCF r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/25 23:33:44 01629FCF r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/25 23:33:44 01629FCF r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/25 23:33:45 01629FCF r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/25 23:33:45 01629FCF r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/25 23:33:45 01629FCF r (reader) HD+ [smartreader] card system not supported
  • 2017/11/25 23:33:45 01629FCF r (reader) HD+ [smartreader] Normal mode failed, reverting to Deprecated Mode
  • 2017/11/25 23:34:07 01629FCF r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20
  • 2017/11/25 23:34:07 01629FCF r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/25 23:34:07 01629FCF r (reader) HD+ [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
  • 2017/11/25 23:34:07 01629FCF r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=1 inv=1 parity=ODD
  • 2017/11/25 23:34:08 01629FCF r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/25 23:34:09 01629FCF r (reader) HD+ [smartreader] Warning: Card returned error on setting ifsd value to 160
  • 2017/11/25 23:34:10 01629FCF r (reader) HD+ [smartreader] detect native nagra card
  • 2017/11/25 23:34:11 01629FCF r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/25 23:34:12 01629FCF r (reader) HD+ [smartreader] T1 Resync command error, trying to reactivate!
  • 2017/11/25 23:34:16 01629FCF r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20
  • 2017/11/25 23:34:16 01629FCF r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/25 23:34:16 01629FCF r (reader) HD+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/25 23:34:16 01629FCF r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/25 23:34:16 01629FCF r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/25 23:34:16 01629FCF r (reader) HD+ [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/25 23:34:19 01629FCF r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/25 23:34:20 01629FCF r (reader) HD+ [smartreader] T1 Resync command error, trying to reactivate!
  • 2017/11/25 23:34:23 01629FCF r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20
  • 2017/11/25 23:34:23 01629FCF r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/25 23:34:23 01629FCF r (reader) HD+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/25 23:34:23 01629FCF r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/25 23:34:24 01629FCF r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/25 23:34:24 01629FCF r (reader) HD+ [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/25 23:34:24 01629FCF r (reader) HD+ [smartreader] card system not supported
  • 2017/11/25 23:34:24 01629FCF r (reader) HD+ [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2017/11/25 23:34:24 01629FCF r (reader) HD+ [smartreader] card initializing error
[reader]
label = HD+
protocol = smartreader
device = Serial:Reader XXXXXX
caid = 1843
boxid = 12345678
ins7e11 = 15
detect = cd
autospeed = 1
#mhz = 480
#cardmhz = 480
group = 1
emmcache = 1,1,31,0
 
Zuletzt bearbeitet:
Die Karte scheint nicht richtig zu antworten. Ohne Configs kann man dir da nicht weiterhelfen.
 
Hatte ich vergessen, jetzt mit oscam.server
 
reader]
label = HD+
protocol = smartreader
device = Serial:Reader xxxxxxx
caid = 1834
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 534
cardmhz = 369
ident = 1834:000000,003411,008011
group = 2
emmcache = 1,999,7,0
blockemm-unknown = 1
 
Zuletzt bearbeitet:
probiers mal damit:

[reader]
label = hdplus
protocol = smartreader
device = Serial:Reader XX
services = hd+
caid = 1843
boxkey = XX...
rsakey = XX...
detect = cd
nagra_read = 2
mhz = 357
cardmhz = 357
ident = 1843:000000,003411,008011
group = 3
emmcache = 1,1,2
 
Danke für die reader Einträge, aber das Resultat ist das gleiche. Ich bin echt ratlos.

Hier noch die User und die Config

[account]
user = SZ
pwd = XXXXXX
hostname = 192.xxxxxxxxxx
caid = 09C4,1843
au = 1
group = 1
cccmaxhops = 0

[account]
user = WZ
pwd = XXXXXX
hostname = 192.xxxxxxxxxx
caid = 09C4,1843
au = 1
group = 1
cccmaxhops = 0

[account]
user = KZ
pwd = XXXXXX
hostname = 192.xxxxxxxxxx
caid = 09C4,1843
au = 1
group = 1
cccmaxhops = 0

[global]
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
emmlogdir = /var/log/ipc/

[cccam]
port = xxxxxx
nodeid = 6332B716104A13F0
version = 2.0.11
reshare = 2
forward_origin_card = 1

[webif]
httpport = 83
httpuser = xxxxx
httppwd = xxxxxxxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
hideclient_to = 15
 
welchen Reader hast du übernommen?
poste mal trotzdem auch das log ab start dazu bitte

ansonsten würde ich mal den Reader wechseln auf Easymouse, Apollo oder Omnikey
 
@counter
Ich habe doch geschrieben das ich sie ausprobiert habe. Dann sind die wohl auch falsch!
 
@dodo83
Ich habe beide probiert.

  • (reader) hdplus [smartreader] Reader initialized (device=Serial:Reader 1B12A3C, detect=cd, mhz= AUTO, cardmhz=369)
  • 2017/11/26 09:57:22 5B655C15 r (reader) hdplus [smartreader] card detected
  • 2017/11/26 09:57:26 5B655C15 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2017/11/26 09:57:26 5B655C15 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/26 09:57:26 5B655C15 r (reader) hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/26 09:57:26 5B655C15 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/26 09:57:27 5B655C15 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/26 09:57:27 5B655C15 r (reader) hdplus [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/26 09:57:28 5B655C15 r (reader) hdplus [smartreader] detect native nagra card
  • 2017/11/26 09:57:29 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:29 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:30 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:30 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:31 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:31 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:32 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:32 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:33 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:33 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:35 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:35 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:35 5B655C15 r (reader) hdplus [smartreader] card system not supported
  • 2017/11/26 09:57:35 5B655C15 r (reader) hdplus [smartreader] Normal mode failed, reverting to Deprecated Mode
  • 2017/11/26 09:57:38 5B655C15 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2017/11/26 09:57:38 5B655C15 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/26 09:57:38 5B655C15 r (reader) hdplus [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
  • 2017/11/26 09:57:38 5B655C15 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=1 inv=1 parity=ODD
  • 2017/11/26 09:57:39 5B655C15 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/26 09:57:40 5B655C15 r (reader) hdplus [smartreader] Warning: Card returned error on setting ifsd value to 160
  • 2017/11/26 09:57:41 5B655C15 r (reader) hdplus [smartreader] detect native nagra card
  • 2017/11/26 09:57:42 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:43 5B655C15 r (reader) hdplus [smartreader] T1 Resync command error, trying to reactivate!
  • 2017/11/26 09:57:47 5B655C15 r (reader) hdplus [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2017/11/26 09:57:47 5B655C15 r (reader) hdplus [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/26 09:57:47 5B655C15 r (reader) hdplus [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/26 09:57:47 5B655C15 r (reader) hdplus [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/26 09:57:48 5B655C15 r (reader) hdplus [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/26 09:57:48 5B655C15 r (reader) hdplus [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/26 09:57:49 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:49 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:50 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:50 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:51 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:51 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:53 5B655C15 r (reader) hdplus [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 09:57:53 5B655C15 r (reader) hdplus [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 09:57:53 5B655C15 r (reader) hdplus [smartreader] card system not supported
  • 2017/11/26 09:57:53 5B655C15 r (reader) hdplus [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2017/11/26 09:57:53 5B655C15 r (reader) hdplus [smartreader] card initializing error

  • 2017/11/26 10:27:05 5B655C15 r (reader) HD+ [smartreader] Reader initialized (device=Serial:Reader 1B12A3C, detect=cd, mhz= AUTO, cardmhz=369)
  • 2017/11/26 10:27:06 5B655C15 r (reader) HD+ [smartreader] card detected
  • 2017/11/26 10:27:10 5B655C15 r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2017/11/26 10:27:10 5B655C15 r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/26 10:27:10 5B655C15 r (reader) HD+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/26 10:27:10 5B655C15 r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/26 10:27:11 5B655C15 r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/26 10:27:11 5B655C15 r (reader) HD+ [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/26 10:27:12 5B655C15 r (reader) HD+ [smartreader] detect native nagra card
  • 2017/11/26 10:27:13 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:13 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:14 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:14 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:15 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:15 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:17 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:17 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:18 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:18 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:18 5B655C15 r (reader) HD+ [smartreader] card system not supported
  • 2017/11/26 10:27:18 5B655C15 r (reader) HD+ [smartreader] Normal mode failed, reverting to Deprecated Mode
  • 2017/11/26 10:27:21 5B655C15 r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2017/11/26 10:27:21 5B655C15 r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/26 10:27:21 5B655C15 r (reader) HD+ [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
  • 2017/11/26 10:27:21 5B655C15 r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=1 inv=1 parity=ODD
  • 2017/11/26 10:27:22 5B655C15 r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/26 10:27:23 5B655C15 r (reader) HD+ [smartreader] Warning: Card returned error on setting ifsd value to 160
  • 2017/11/26 10:27:24 5B655C15 r (reader) HD+ [smartreader] detect native nagra card
  • 2017/11/26 10:27:25 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:27 5B655C15 r (reader) HD+ [smartreader] T1 Resync command error, trying to reactivate!
  • 2017/11/26 10:27:30 5B655C15 r (reader) HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
  • 2017/11/26 10:27:30 5B655C15 r (reader) HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
  • 2017/11/26 10:27:30 5B655C15 r (reader) HD+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
  • 2017/11/26 10:27:30 5B655C15 r (reader) HD+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
  • 2017/11/26 10:27:31 5B655C15 r (reader) HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
  • 2017/11/26 10:27:31 5B655C15 r (reader) HD+ [smartreader] Card responded ok for ifsd request of 160
  • 2017/11/26 10:27:32 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:32 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:33 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:33 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:34 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:34 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:35 5B655C15 r (reader) HD+ [smartreader] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
  • 2017/11/26 10:27:35 5B655C15 r (reader) HD+ [smartreader] T1 Resync command succesfull ifsc = 160
  • 2017/11/26 10:27:35 5B655C15 r (reader) HD+ [smartreader] card system not supported
  • 2017/11/26 10:27:35 5B655C15 r (reader) HD+ [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2017/11/26 10:27:35 5B655C15 r (reader) HD+ [smartreader] card initializing error
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

T
gelöst Konfig Probleme bei HD+
2
Antworten
19
Aufrufe
382
Token
T
S
gelöst Oscam Reader werden nach einiger Zeit nicht mehr abgefragt.
Antworten
10
Aufrufe
510
RuckZuck
M
DM8000 und V14 ?
Antworten
5
Aufrufe
251
telecomic
H
gelöst Welchen Raspberry Pi als Ersatz für eine Uralt-Freetz-Oscam Lösung auf einer FB7141 - nur Hd+
2
Antworten
17
Aufrufe
868
RuckZuck
gelöst Oscam Server hinter VPS Oscam Server Problem
2 3
Antworten
30
Aufrufe
844
TDCroPower
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…