HD+ geht plötzlich nicht mehr

SlayerSH · 8. April 2012

Habe einen IPC mit Sky S02 und weißer HD+ Karte am laufen. OSCAM wird für HD+ als Tunnel zu CCcam genutzt. Jetzt gibt es bei mir seit gestern das Problem das plötzlich HD+ nicht mehr geht. Der Server ist sicherlich nicht ootimal eingerichtet, aber bisher lief das Ganze immer 1a. Es wurde auch nichts daran geändert. Folgendes schmeißt mein Log aus:

Code:

2012/04/08 10:03:48 B78206C0 s version=1.00-unstable_svn, build #4250, system=i686-pc-linux, nice=-1
2012/04/08 10:03:48 B78206C0 s client max. idle=120 sec, debug level=0
2012/04/08 10:03:48 B78206C0 s max. logsize=1024 Kb
2012/04/08 10:03:48 B78206C0 s client timeout=5000 ms, fallback timeout=1600 ms, cache delay=120 ms
2012/04/08 10:03:48 B78206C0 s auth size=4880
2012/04/08 10:03:48 B78206C0 s services reloaded: 0 services freed, 2 services loaded
2012/04/08 10:03:48 B78206C0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2012/04/08 10:03:48 B78206C0 s signal handling initialized (type=sysv)
2012/04/08 10:03:48 B78206C0 s can't open file "/var/etc/oscam.srvid" (err=2), no service-id's loaded
2012/04/08 10:03:48 B78206C0 s can't open file "/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2012/04/08 10:03:48 B78206C0 s can't open file "/var/etc/oscam.provid" (err=2), no provids's loaded
2012/04/08 10:03:48 B78206C0 s can't open file "/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2012/04/08 10:03:48 B78206C0 s monitor: initialized (fd=6, port=988)
2012/04/08 10:03:48 B78206C0 s camd33: disabled
2012/04/08 10:03:48 B78206C0 s camd35: disabled
2012/04/08 10:03:48 B78206C0 s cs378x: disabled
2012/04/08 10:03:48 B78206C0 s newcamd: initialized (fd=7, port=34100, crypted)
2012/04/08 10:03:48 B78206C0 s CAID: 1830
2012/04/08 10:03:48 B78206C0 s provid #0: 000000
2012/04/08 10:03:48 B78206C0 s newcamd: initialized (fd=8, port=34000, crypted)
2012/04/08 10:03:48 B78206C0 s CAID: 1833
2012/04/08 10:03:48 B78206C0 s provid #0: 000000
2012/04/08 10:03:48 B78206C0 s newcamd: initialized (fd=9, port=34200, crypted)
2012/04/08 10:03:48 B78206C0 s CAID: 1702
2012/04/08 10:03:48 B78206C0 s provid #0: 000000
2012/04/08 10:03:48 B78206C0 s cccam: disabled
2012/04/08 10:03:48 B78206C0 s radegast: disabled
2012/04/08 10:03:48 B78206C0 s http thread started
2012/04/08 10:03:48 B78206C0 s creating thread for device 001:019
2012/04/08 10:03:48 B78206C0 s creating thread for device 127.0.0.1
2012/04/08 10:03:48 B78206C0 s can't read from file /tmp/.oscam/stat
2012/04/08 10:03:48 B78206C0 s waiting for local card init
2012/04/08 10:03:48 B77EC280 h HTTP Server listening on port 55555
2012/04/08 10:03:48 B77E5B70 r reader thread started (thread=B77E5B70, label=hd+, device=001:019, detect=cd, mhz=357, cardmhz=600)
2012/04/08 10:03:48 B77E5B70 r Using 0x82 as endpoint for smartreader hardware detection
2012/04/08 10:03:48 B6FE4B70 p proxy thread started  (thread=B6FE4B70, label=server, server=127.0.0.1)
2012/04/08 10:03:48 B6FE4B70 p proxy reader: server (127.0.0.1:12000) cccam v2.1.1 build 2971, maxhop: 10
2012/04/08 10:03:48 B6FE4B70 p connecting to 127.0.0.1
2012/04/08 10:03:48 B6FE4B70 p connect(fd=19) failed: (errno=115: Operation now in progress)
2012/04/08 10:03:48 B6FE4B70 p server network connect error!
2012/04/08 10:03:48 B77E5B70 r Found smartreader device 001:019
2012/04/08 10:03:52 B78206C0 s init for all local cards done
2012/04/08 10:03:52 B78206C0 s anti cascading disabled
2012/04/08 10:03:52 B5FE2280 c client connected to 34100 port
2012/04/08 10:03:52 B5FE2280 c encrypted newcamd:34100-client 127.0.0.1 granted (ASTRAHD+1, au(auto)=0)
2012/04/08 10:03:52 B5FE2280 c user ASTRAHD+1 authenticated successfully (CCcam)
2012/04/08 10:03:52 B5FE2280 c AU disabled for user ASTRAHD+1
2012/04/08 10:03:52 B5FDB280 c client connected to 34000 port
2012/04/08 10:03:52 B5FDB280 c encrypted newcamd:34000-client 127.0.0.1 granted (sky1833, au(auto)=0)
2012/04/08 10:03:52 B5FDB280 c user sky1833 authenticated successfully (CCcam)
2012/04/08 10:03:52 B5FDB280 c AU disabled for user sky1833
2012/04/08 10:04:22 B6FE4B70 p connecting to 127.0.0.1
2012/04/08 10:04:22 B6FE4B70 p connect(fd=19) failed: (errno=103: Software caused connection abort)
2012/04/08 10:04:22 B6FE4B70 p server network connect error!
2012/04/08 10:04:22 B5FDB280 c sky1833 (1833&000000/000B/93:EDEE): rejected reader peer (1 ms) (of 1 avail 1)
2012/04/08 10:04:35 B6FE4B70 p connecting to 127.0.0.1
2012/04/08 10:04:35 B6FE4B70 p connect(fd=19) failed: (errno=115: Operation now in progress)
2012/04/08 10:04:35 B6FE4B70 p server network connect error!
2012/04/08 10:04:35 B5FDB280 c sky1833 (1833&000000/0009/93:3D5F): rejected reader peer (1 ms) (of 1 avail 1)
2012/04/08 10:04:39 B6FE4B70 p connecting to 127.0.0.1
2012/04/08 10:04:39 B6FE4B70 p connect(fd=19) failed: (errno=103: Software caused connection abort)
2012/04/08 10:04:39 B6FE4B70 p server network connect error!
2012/04/08 10:04:39 B5FDB280 c sky1833 (1833&000000/0017/93:6869): rejected reader peer (1 ms) (of 1 avail 1)
2012/04/08 10:04:39 B5FE2280 c Connection closed to client
2012/04/08 10:04:39 B5FE2280 c ASTRAHD+1 disconnected  from 127.0.0.1
2012/04/08 10:04:39 B5FE2280 c thread B5FE2280 ended!
2012/04/08 10:04:39 B5FDB280 c Connection closed to client
2012/04/08 10:04:39 B5FDB280 c sky1833 disconnected  from 127.0.0.1
2012/04/08 10:04:39 B5FDB280 c thread B5FDB280 ended!
2012/04/08 10:04:45 B5FDB280 c client connected to 34100 port
2012/04/08 10:04:45 B5FDB280 c encrypted newcamd:34100-client 127.0.0.1 granted (ASTRAHD+1, au(auto)=0)
2012/04/08 10:04:45 B5FDB280 c user ASTRAHD+1 authenticated successfully (CCcam)
2012/04/08 10:04:45 B5FDB280 c AU disabled for user ASTRAHD+1
2012/04/08 10:04:45 B5FE2280 c client connected to 34000 port
2012/04/08 10:04:45 B5FE2280 c encrypted newcamd:34000-client 127.0.0.1 granted (sky1833, au(auto)=0)
2012/04/08 10:04:45 B5FE2280 c user sky1833 authenticated successfully (CCcam)
2012/04/08 10:04:45 B5FE2280 c AU disabled for user sky1833
2012/04/08 10:07:04 B5FDB280 c ASTRAHD+1 (1830&000000/EF74/92:A6DA): not found (0 ms) (of 1 avail 1)
2012/04/08 10:07:30 B5FDB280 c ASTRAHD+1 (1830&000000/EF15/92:15BF): not found (0 ms) (of 1 avail 1)

Smargo ist auf FIX 3.69 eingestellt. Hier die oscam.server:

Code:

# OSCam Konfiguration IPC - oscam.server

[reader]
Label = hd+
#protocol = mouse
protocol = smartreader
detect = CD
device = 001:021
#device = /dev/ttyUSB1
smargopatch = 1
au = 1
group = 1
CAID = 1830
EMMCache = 1,3,2
rsakey = XYZ
boxkey = XYZ
#cardmhz = 368
ident = 1830:000000;1830:003411;1830:008011


[reader]
label               = server
enable              = 1
protocol            = cccam
device              = 127.0.0.1,12000
account             = Betatunnel1833,1833to1702
group               = 2
emmcache        = 1,3,2
lb_weighz           = 100
CAID                = 1702,1833
boxid             = 12345678
boxkey            = 1122334455667788
Ident               = 0000:000000
Services            = Sky

oscam.user

Code:

[account]
user = ASTRAHD+1
pwd = 123456
group = 1
au = HDplus
ident = 1830:000000;1830:003411;1830:008011
caid = 1830
#CAID = 1830hd+

[account]
user = monitor
pwd = monitor
monlevel = 4

[account]
User = sky1833
Pwd = betatunnel
Group = 2
MonLevel = 0
Uniq = 0
Betatunnel = 1833.FFFF:1702
AU = 0
CAID = 1833,1702,1830
Services = Sky
Ident = 0000:000000
cccreshare = 0

Jetzt plötzlich ist es sogar so das wenn ich die HD+ Karte in den Smargo stecke, OSCAM kurz darauf OFF geht. Habe ich die karte nicht drin, dann läuft OSCAM. Das Problem tauchte jetzt erst vor einigen Minuten auf. Hat vielleicht jemand ne Ahnung woran das Ganze liegen kann?

Skywalker · 8. April 2012

Was ich dir schon mal beim Schnellüberflug deiner Config sagen kann...
Deine HD+ Karte bekommt keine EMM , wird also nicht upgedatet. Das ist mit den Configs nicht möglich....

Skywalker1 Mobil, GalaxyS GT-I9000

SlayerSH · 8. April 2012

Ja, das weis ich. Wollte mich daran schon länger versuchen, bin aber irgendwie nie dazu gekommen das zu ändern. Frei nach dem Motto "never change a running system" :emoticon-0143-smirk Habe aber vergessen zu erwähnen, dass ich die Karte natürlich schon direkt in die Dreambox gesteckt habe damit sie neue EMMs bekommt. Dort läuft sie dann auch tadellos.

SlayerSH · 8. April 2012

Nun habe ich es mitlerweile hinbekommen das OSCAM nur noch abschmirgelt wenn ich die Karte im laufenden Betrieb einstecke. Folgendes schmeißt mir der Log momentan aus:

Code:

2012/04/08 12:56:48 B77DEB70 r Found smartreader device 001:024
2012/04/08 12:56:52 B78196C0 s init for all local cards done
2012/04/08 12:56:52 B78196C0 s anti cascading disabled
2012/04/08 12:56:52 B5FDA280 c client connected to 34100 port
2012/04/08 12:56:52 B5FDA280 c encrypted newcamd:34100-client 127.0.0.1 granted (ASTRAHD+1, au(auto)=0)
2012/04/08 12:56:52 B5FDA280 c user ASTRAHD+1 authenticated successfully (CCcam)
2012/04/08 12:56:52 B5FDA280 c AU disabled for user ASTRAHD+1
2012/04/08 12:56:52 B5FD3280 c client connected to 34000 port
2012/04/08 12:56:52 B5FD3280 c encrypted newcamd:34000-client 127.0.0.1 granted (sky1833, au(auto)=0)
2012/04/08 12:56:52 B5FD3280 c user sky1833 authenticated successfully (CCcam)
2012/04/08 12:56:52 B5FD3280 c AU disabled for user sky1833
2012/04/08 12:57:06 B5FDA280 c ASTRAHD+1 (1830&000000/EF10/92:FB00): not found (0 ms) (of 1 avail 1)
2012/04/08 12:57:12 B5FDA280 c ASTRAHD+1 (1830&000000/EF15/92:C5A5): not found (0 ms) (of 1 avail 1)
2012/04/08 12:57:19 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:C2FA): not found (1 ms) (of 1 avail 1)
2012/04/08 12:57:26 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:B64C): not found (0 ms) (of 1 avail 1)
2012/04/08 12:57:32 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:CB03): not found (1 ms) (of 1 avail 1)
2012/04/08 12:57:39 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:6DED): not found (1 ms) (of 1 avail 1)
2012/04/08 12:57:45 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:14AE): not found (1 ms) (of 1 avail 1)
2012/04/08 12:57:51 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:396E): not found (0 ms) (of 1 avail 1)
2012/04/08 12:57:58 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:B40A): not found (0 ms) (of 1 avail 1)
2012/04/08 12:58:01 B5FCC280 c client connected to 34000 port
2012/04/08 12:58:01 B5FCC280 c Connection closed to client
2012/04/08 12:58:01 B5FCC280 c thread B5FCC280 ended!
2012/04/08 12:58:01 B5FC5280 c client connected to 34000 port
2012/04/08 12:58:01 B5FC5280 c Connection closed to client
2012/04/08 12:58:01 B5FC5280 c thread B5FC5280 ended!
2012/04/08 12:58:01 B5FBE280 c client connected to 34000 port
2012/04/08 12:58:01 B5FBE280 c Connection closed to client
2012/04/08 12:58:01 B5FBE280 c thread B5FBE280 ended!
2012/04/08 12:58:01 B5FB7280 c client connected to 34100 port
2012/04/08 12:58:01 B5FB7280 c Connection closed to client
2012/04/08 12:58:01 B5FB7280 c thread B5FB7280 ended!
2012/04/08 12:58:01 B5FB0280 c client connected to 34100 port
2012/04/08 12:58:01 B5FB0280 c Connection closed to client
2012/04/08 12:58:01 B5FB0280 c thread B5FB0280 ended!
2012/04/08 12:58:02 B5FA9280 c client connected to 34100 port
2012/04/08 12:58:02 B5FA9280 c Connection closed to client
2012/04/08 12:58:02 B5FA9280 c thread B5FA9280 ended!
2012/04/08 12:58:05 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:BB26): not found (0 ms) (of 1 avail 1)
2012/04/08 12:58:12 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:4D7F): not found (1 ms) (of 1 avail 1)
2012/04/08 12:58:15 B6FDDB70 p connecting to 127.0.0.1
2012/04/08 12:58:15 B6FDDB70 p connect(fd=18) failed: (errno=103: Software caused connection abort)
2012/04/08 12:58:15 B6FDDB70 p server network connect error!
2012/04/08 12:58:15 B5FD3280 c sky1833 (1833&000000/0083/93:ED51): rejected reader peer (1 ms) (of 1 avail 1)
2012/04/08 12:58:30 B5FDA280 c ASTRAHD+1 (1830&000000/EF75/92:403F): not found (1 ms) (of 1 avail 1)
2012/04/08 12:58:51 B5FDA280 c ASTRAHD+1 (1830&000000/EF76/92:1CC5): not found (0 ms) (of 1 avail 1)
2012/04/08 12:58:58 B5FDA280 c ASTRAHD+1 (1830&000000/EF75/92:C24C): not found (0 ms) (of 1 avail 1)
2012/04/08 12:59:00 B5FDA280 c ASTRAHD+1 (1830&000000/EF77/92:C843): not found (1 ms) (of 1 avail 1)
2012/04/08 12:59:06 B5FDA280 c ASTRAHD+1 (1830&000000/EF74/92:98AC): not found (1 ms) (of 1 avail 1)

Die Entitlements der HD+ Karte werden dort nicht angezeigt. Im Webinterface unter READERS stehen diese jedoch

Code:

->detect native nagra card 
----------------------------------------- 
|id  |tier    |valid from  |valid to    | 
+----+--------+------------+------------+ 
|8011|0064    |2010/06/21  |2011/06/22  | 
|8011|0065    |1992/01/01  |1993/01/01  | 
|8011|0BEA    |2011/06/24  |2012/07/29  | 
----------------------------------------- 
ROM:    D N A S P 1 4 2 
REV:    R e v G C 4 
SER:    XX XX XX XX
CAID:   1830 
Prv.ID: 00 00 34 11 (sysid) 
Prv.ID: 00 00 00 00  
Prv.ID: 00 00 80 11

SlayerSH · 9. April 2012

Ich muss meinen Thread noch mal pushen. Wie kann es sein, dass eine HD+ Karte im internen Schacht der Dreambox tadellos funktioniert (cccam und scam getestet) und dieselbe Karte im Smargo am IPC plötzlich nicht mehr? Am Server (IPC) sind 4 Smargos angeschlossen - 3 davon steuert direkt cccam an. Die drei dort eingesteckten Karten (2x Sky + 1x MTV) laufen 1a. Nehme ich eine davon raus und stecke die HD+ rein, dann schmeißt mir mein Log immer "card detected fail" raus. cccam ist 2.2.1 drauf.

Die im vorherigen Post geposteten Entitlements der HD+ Karte im Webinterface schienen übrigens aus dem Cache zu kommen, denn nach einem IPC Update von 10.8 auf 11.3 sind die nun verschwunden.

Suche

Suche

HD+ geht plötzlich nicht mehr

SlayerSH

Ist oft hier

Skywalker

SlayerSH

Ist oft hier

SlayerSH

Ist oft hier

SlayerSH

Ist oft hier

Ähnliche Themen

Spenden Unterstützung