Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

[gelöst] HD+ läuft nicht

    Nobody is reading this thread right now.
AW: HD+ läuft nicht

Wo finde ich nun wieder Oscam web?
wie kann ich einen log Posten damit er lesbar ist?
 
AW: HD+ läuft nicht

kann die log datei nicht öffnen da erscheint nur wirrwar
 
AW: HD+ läuft nicht

oscam web öffnest du in dem du die ip.vom.receiver:8080 eingibst..
 
AW: HD+ läuft nicht

der log ist zu lang kann den nicht posten
und ins web interface komme ich aber da kann ich nichts machen da kann ich nur den receiver bedienen aber nichts konfigurieren
so schwer kanns doch nicht sein
 
Zuletzt bearbeitet:
AW: HD+ läuft nicht

ab da wo es anfängt den reader zu loggen..
und dann so weit wie möglich.. (bis nicht mehr geht)
also der obere abschnitt ist wichtig..

- - - - - - - - - -



und bitte nochmal dein cfg posten..
 
AW: HD+ läuft nicht

<< cardserver started at Sun Feb 8 09:29:57 2015
-------------------------------------------------------------------------------
2015/02/08 09:29:57 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9986 (mipsel-oe-linux-ssl)
2015/02/08 09:29:57 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 685
2015/02/08 09:29:57 0 s [Emu] OSEmu (built-in) version 706
2015/02/08 09:29:57 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/02/08 09:29:57 0 s signal handling initialized
2015/02/08 09:29:57 0 s cccam: initialized (fd=4, port=12000)
2015/02/08 09:29:57 0 s hd02 [internal] creating thread for device /dev/sci0
2015/02/08 09:29:57 0 s V13 [internal] creating thread for device /dev/sci1
2015/02/08 09:29:57 0 s emulator [emu] creating thread for device emulator
2015/02/08 09:29:57 54B620 r hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/02/08 09:29:57 54D458 r V13 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/02/08 09:29:57 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/08 09:29:57 0 s waiting for local card init
2015/02/08 09:29:57 775004F8 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/02/08 09:29:57 545E28 h webif: decompressed 157215 bytes back into 372672 bytes
2015/02/08 09:29:57 545E28 h HTTP Server running. ip=0.0.0.0 port=8080
2015/02/08 09:29:58 54B620 r hd02 [internal] card detected
2015/02/08 09:29:58 775004F8 r emulator [emu] card detected
2015/02/08 09:29:58 54D458 r V13 [internal] card detected
2015/02/08 09:29:58 54D458 r V13 [internal] using sh4 or old reset
2015/02/08 09:29:58 54B620 r hd02 [internal] using sh4 or old reset
2015/02/08 09:29:59 54D458 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:29:59 54D458 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:29:59 54D458 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:29:59 54D458 r V13 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/02/08 09:29:59 54B620 r hd02 [internal] ATR: 00 00
2015/02/08 09:29:59 54B620 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:29:59 54B620 r hd02 [internal] Error activating card.
2015/02/08 09:29:59 775004F8 r emulator [emu] found card system emu
2015/02/08 09:29:59 775004F8 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/08 09:30:00 54B620 r hd02 [internal] using sh4 or old reset
2015/02/08 09:30:00 54B620 r hd02 [internal] ATR: 00 00
2015/02/08 09:30:00 54B620 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:30:00 54B620 r hd02 [internal] Error activating card.
2015/02/08 09:30:02 54B620 r hd02 [internal] using sh4 or old reset
2015/02/08 09:30:02 54B620 r hd02 [internal] ATR: 00 00
2015/02/08 09:30:02 54B620 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:30:02 54B620 r hd02 [internal] Error activating card.
2015/02/08 09:30:02 54D458 r V13 [internal] Sended reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2015/02/08 09:30:02 54B620 r hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/08 09:30:02 54B620 r hd02 [internal] card initializing error
2015/02/08 09:30:03 54D458 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:30:03 54D458 r V13 [internal] Card responded ok for ifsd request of 160
2015/02/08 09:30:04 54D458 r V13 [internal] detect native nagra card
2015/02/08 09:30:07 54D458 r V13 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/02/08 09:30:10 54D458 r V13 [internal] T1 Resync command error, trying to reactivate!
2015/02/08 09:30:11 54D458 r V13 [internal] using sh4 or old reset
2015/02/08 09:30:11 54D458 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:30:11 54D458 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:30:11 54D458 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:30:11 54D458 r V13 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/02/08 09:30:15 54D458 r V13 [internal] Sended reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2015/02/08 09:30:15 54D458 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:30:15 54D458 r V13 [internal] Card responded ok for ifsd request of 160
2015/02/08 09:30:15 54D458 r V13 [internal] card system not supported
2015/02/08 09:30:15 54D458 r V13 [internal] Normal mode failed, reverting to Deprecated Mode
2015/02/08 09:30:15 54D458 r V13 [internal] using sh4 or old reset
2015/02/08 09:30:16 54D458 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:30:16 54D458 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:30:16 54D458 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:30:16 54D458 r V13 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/02/08 09:30:19 54D458 r V13 [internal] Sended reader settings T=0 fs=6 ETU=372 WWT=0 CWT=139 BWT=15371 EGT=0 clock=0 check=0 P=5 I=25 U=0
2015/02/08 09:30:19 54D458 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:30:23 54D458 r V13 [internal] Warning: Card returned error on setting ifsd value to 160
2015/02/08 09:30:24 54D458 r V13 [internal] detect native nagra card
2015/02/08 09:30:28 54D458 r V13 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/02/08 09:30:32 54D458 r V13 [internal] T1 Resync command error, trying to reactivate!
2015/02/08 09:30:33 54D458 r V13 [internal] using sh4 or old reset
2015/02/08 09:30:33 54D458 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:30:33 54D458 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:30:33 54D458 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:30:33 54D458 r V13 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/02/08 09:30:37 54D458 r V13 [internal] Sended reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2015/02/08 09:30:37 54D458 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:30:37 54D458 r V13 [internal] Card responded ok for ifsd request of 160
2015/02/08 09:30:41 54D458 r V13 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/02/08 09:30:44 54D458 r V13 [internal] T1 Resync command error, trying to reactivate!
2015/02/08 09:30:44 54D458 r V13 [internal] using sh4 or old reset
2015/02/08 09:30:45 54D458 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:30:45 54D458 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:30:45 54D458 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:30:45 54D458 r V13 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/02/08 09:30:46 0 s init for all local cards done
2015/02/08 09:30:46 0 s anti cascading disabled
2015/02/08 09:30:
Sie müssen registriert sein, um Links zu sehen.
c plain dvbapi-client granted (dvbapi, au=on (2 reader))
2015/02/08 09:30:
Sie müssen registriert sein, um Links zu sehen.
c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2015/02/08 09:30:46 545E28 h HTTP Server stopped
2015/02/08 09:30:46 0 s killing client dvbapi
2015/02/08 09:30:46 0 s hd02 [internal] Killing reader
2015/02/08 09:30:46 0 s V13 [internal] Killing reader
2015/02/08 09:30:46 0 s emulator [emu] Killing reader
2015/02/08 09:30:46 0 s userdb 1 accounts freed
2015/02/08 09:30:46 0 s readerdb 3 readers freed
2015/02/08 09:30:46 0 s cardserver down

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Feb 8 09:31:29 2015
-------------------------------------------------------------------------------
2015/02/08 09:31:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9986 (mipsel-oe-linux-ssl)
2015/02/08 09:31:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1132
2015/02/08 09:31:29 0 s [Emu] OSEmu (built-in) version 706
2015/02/08 09:31:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/02/08 09:31:29 0 s signal handling initialized
2015/02/08 09:31:29 0 s cccam: initialized (fd=5, port=12000)
2015/02/08 09:31:29 0 s hd02 [internal] creating thread for device /dev/sci0
2015/02/08 09:31:29 0 s V13 [internal] creating thread for device /dev/sci1
2015/02/08 09:31:29 0 s emulator [emu] creating thread for device emulator
2015/02/08 09:31:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/08 09:31:29 0 s waiting for local card init
2015/02/08 09:31:29 77A0FD68 r V13 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/02/08 09:31:29 77A0DF30 r hd02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/02/08 09:31:29 77A0DF30 r hd02 [internal] card detected
2015/02/08 09:31:29 77A13728 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/02/08 09:31:29 77A0FD68 r V13 [internal] card detected
2015/02/08 09:31:29 53A740 h webif: decompressed 157215 bytes back into 372672 bytes
2015/02/08 09:31:29 53A740 h HTTP Server running. ip=0.0.0.0 port=8080
2015/02/08 09:31:30 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:31:30 77A0FD68 r V13 [internal] using sh4 or old reset
2015/02/08 09:31:30 77A13728 r emulator [emu] card detected
2015/02/08 09:31:31 77A0FD68 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:31:31 77A0FD68 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:31:31 77A0FD68 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:31:31 77A0FD68 r V13 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/02/08 09:31:31 77A13728 r emulator [emu] found card system emu
2015/02/08 09:31:31 77A13728 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/02/08 09:31:35 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:31:36 77A0FD68 r V13 [internal] Sended reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2015/02/08 09:31:36 77A0FD68 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:31:36 77A0FD68 r V13 [internal] Card responded ok for ifsd request of 160
2015/02/08 09:31:37 77A0FD68 r V13 [internal] detect native nagra card
2015/02/08 09:31:39 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:31:43 0 --- Skipped 1 duplicated log lines ---
2015/02/08 09:31:43 77A0FD68 r V13 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/02/08 09:31:43 77A0FD68 r V13 [internal] T1 Resync command error, trying to reactivate!
2015/02/08 09:31:43 77A0DF30 r hd02 [internal] ATR: 00 00
2015/02/08 09:31:43 77A0DF30 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:31:43 77A0DF30 r hd02 [internal] Error activating card.
2015/02/08 09:31:44 77A0FD68 r V13 [internal] using sh4 or old reset
2015/02/08 09:31:44 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:31:44 77A0DF30 r hd02 [internal] ATR: 00 00
2015/02/08 09:31:44 77A0DF30 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:31:44 77A0DF30 r hd02 [internal] Error activating card.
2015/02/08 09:31:45 77A0FD68 r V13 [internal] using sh4 or old reset
2015/02/08 09:31:45 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:31:45 77A0DF30 r hd02 [internal] ATR: 00 00
2015/02/08 09:31:45 77A0DF30 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:31:45 77A0DF30 r hd02 [internal] Error activating card.
2015/02/08 09:31:46 77A0DF30 r hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/08 09:31:46 77A0DF30 r hd02 [internal] card initializing error
2015/02/08 09:31:46 77A0FD68 r V13 [internal] using sh4 or old reset
2015/02/08 09:31:51 0 --- Skipped 2 duplicated log lines ---
2015/02/08 09:31:51 77A0FD68 r V13 [internal] ATR: 3F FF
Sie müssen registriert sein, um Links zu sehen.
B0 07 69 FF 4A
Sie müssen registriert sein, um Links zu sehen.
00 11
2015/02/08 09:31:51 77A0FD68 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/02/08 09:31:51 77A0FD68 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:31:51 77A0FD68 r V13 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/02/08 09:31:55 77A0FD68 r V13 [internal] Sended reader settings T=0 fs=6 ETU=372 WWT=9600 CWT=0 BWT=0 EGT=3 clock=0 check=0 P=5 I=50 U=0
2015/02/08 09:31:55 77A0FD68 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:31:55 77A0FD68 r V13 [internal] card system not supported
2015/02/08 09:31:55 77A0FD68 r V13 [internal] Normal mode failed, reverting to Deprecated Mode
2015/02/08 09:31:55 77A0FD68 r V13 [internal] using sh4 or old reset
2015/02/08 09:31:56 77A0FD68 r V13 [internal] ATR: 3F FF
Sie müssen registriert sein, um Links zu sehen.
B0 07 69 FF 4A
Sie müssen registriert sein, um Links zu sehen.
00 11
2015/02/08 09:31:56 77A0FD68 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/02/08 09:31:56 77A0FD68 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:31:56 77A0FD68 r V13 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/02/08 09:31:59 77A0FD68 r V13 [internal] Sended reader settings T=0 fs=6 ETU=372 WWT=9600 CWT=0 BWT=0 EGT=3 clock=0 check=0 P=5 I=50 U=0
2015/02/08 09:31:59 77A0FD68 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:32:01 77A0FD68 r V13 [internal] card system not supported
2015/02/08 09:32:01 77A0FD68 r V13 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/08 09:32:01 77A0FD68 r V13 [internal] card initializing error
2015/02/08 09:32:01 77A0DF30 r hd02 [internal] card detected
2015/02/08 09:32:02 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:32:02 0 s init for all local cards done
2015/02/08 09:32:02 0 s anti cascading disabled
2015/02/08 09:32:02 77A208F0 c plain dvbapi-client granted (dvbapi, au=on (2 reader))
2015/02/08 09:32:02 77A208F0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2015/02/08 09:32:02 77A0DF30 r hd02 [internal] ATR: 00 00
2015/02/08 09:32:02 77A0DF30 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:32:02 77A0DF30 r hd02 [internal] Error activating card.
2015/02/08 09:32:03 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:32:03 77A0DF30 r hd02 [internal] ATR: 00 00
2015/02/08 09:32:03 77A0DF30 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:32:03 77A0DF30 r hd02 [internal] Error activating card.
2015/02/08 09:32:04 77A0DF30 r hd02 [internal] using sh4 or old reset
2015/02/08 09:32:05 77A0DF30 r hd02 [internal] ATR: 00 00
2015/02/08 09:32:05 77A0DF30 r hd02 [internal] ERROR: Could not read reader->convention
2015/02/08 09:32:05 77A0DF30 r hd02 [internal] Error activating card.
2015/02/08 09:32:05 77A0DF30 r hd02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/02/08 09:32:05 77A0DF30 r hd02 [internal] card initializing error
2015/02/08 09:32:06 77A208F0 c [ADD PID 0] CAID: 1702 ECM_PID: 1744 PROVID: 000000
2015/02/08 09:32:06 77A208F0 c [ADD PID 1] CAID: 1833 ECM_PID: 1844 PROVID: 000000
2015/02/08 09:32:06 77A208F0 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B44 PROVID: 000000
2015/02/08 09:32:06 77A208F0 c [ADD PID 3] CAID: 09AF ECM_PID: 1F44 PROVID: 000000
2015/02/08 09:32:06 77A208F0 c [ADD PID 4] CAID: 098C ECM_PID: 1A44 PROVID: 000000
2015/02/08 09:32:06 77A208F0 c Found 5 ECMpids and 4 STREAMpids in PMT
2015/02/08 09:32:06 77A208F0 c [DVBAPI] Receiver wants to demux srvid 000B on adapter 0000 camask 0001 index 0000 pmtpid 0067
2015/02/08 09:32:06 77A208F0 c New program number: 000B (1702:000B unknown) [pmt_list_management 3]
2015/02/08 09:32:06 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:06 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:06 77A0FD68 r V13 [internal] card detected
2015/02/08 09:32:07 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:07 77A0FD68 r V13 [internal] using sh4 or old reset
2015/02/08 09:32:07 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:07 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:07 77A0FD68 r V13 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E
Sie müssen registriert sein, um Links zu sehen.
4D
Sie müssen registriert sein, um Links zu sehen.

2015/02/08 09:32:07 77A0FD68 r V13 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/02/08 09:32:07 77A0FD68 r V13 [internal] TEST tempo mhz check = 500 mhz
2015/02/08 09:32:07 77A0FD68 r V13 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/02/08 09:32:08 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:08 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:08 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:08 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:09 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:09 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:09 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:10 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:10 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:10 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:11 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:11 77A0FD68 r V13 [internal] Sended reader settings T=0 fs=5 ETU=32 WWT=0 CWT=139 BWT=178571 EGT=0 clock=0 check=0 P=5 I=25 U=0
2015/02/08 09:32:11 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:11 77A0FD68 r V13 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/08 09:32:11 77A0FD68 r V13 [internal] Card responded ok for ifsd request of 160
2015/02/08 09:32:11 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:11 77A208F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/02/08 09:32:12 77A208F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/02/08 09:32:12 77A0FD68 r V13 [internal] detect native nagra card
 
Zuletzt bearbeitet:
AW: HD+ läuft nicht

Bin jetzt grad nicht am Rechner ich sehe aber die v13 geht schonmal unter Oscam
 
AW: HD+ läuft nicht

ja deine v13 geht.. steht ja auch in der logg aber deine hd karte wird von oscam nicht erkannt..

ohne deine cfg kann ich jetzt nicht sagen wo der fehler steckt..
ich bin mir auch ehrlich nicht sicher ob man eine hd02 karte mit oscam aktivieren kann.. mit der cccam2.3.0 und scam gehts definitiv..
oscam liest die karte.. aber aktivieren..????
vllt weiss ein anderer das ja..
evtl die karte bei jemanden der eine hd+ zertifizierten receiver hat aktivieren und dann mit deiner box und oscam..
 
AW: HD+ läuft nicht

Aktiviert ist sie schon seit letztes Jahr oder meinst du sie braucht eventuell mal ein Update?
Wenn ich sie in Cccam und Scam laufen lasse passiert auch nichts
 
Zuletzt bearbeitet:
AW: HD+ läuft nicht

Moin Boardies

Solo² unter Plugins kannst du Socketmmi downloaden. Danach geht du bitte auf RTLHD startest dann Scam 3.59 (grüner Haken).

Dann das Menü aufrufen unter Einstellungen findest du dann Socketmmi. Dort siehst du dann wie lange deine Karte noch geht.

Ich vermute das sie abgelaufen ist.

Gruß
 
AW: HD+ läuft nicht

Das ist auch noch ein Problem das socketemmi habe ich drauf und das zeigt mir 04.11.14 an
habe gestern mit der Hotline telefoniert und die sagten das die Karte noch bis 08.10.15 gültig ist, das hat der der sie mir gegeben hat auch bestätigt.
 
AW: HD+ läuft nicht

Dann lass dir Telefonisch eine Verlängerung schicken.(Scam an auf RTLHD stellen) War bei mir auch mal so.

Welche Caid ist zu sehen? 1843 oder ????
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

B
gelöst Fehlermeldung: Gesteckte Smartkarte wird nicht unterstützt HD001 Karte
3 4 5
Antworten
74
Aufrufe
2K
MKLST2
B
gelöst HD+ wie kann ich mein Vorhaben am besten umsetzen?
2 3 4
Antworten
46
Aufrufe
2K
bubbl
J
  • Gesperrt
OSCAM Probleme mit DM900 und OpenATV 7.5.1 - Kein Ton und/oder Bild auf Sky Sender nach Umschalten auf HD+ Kanal nach Konfigaratinsscript des Anbiete
Antworten
6
Aufrufe
312
tulpenknicker
I
Gelöst F900BT nach Update Freisprechen (u.a.) weg
Antworten
0
Aufrufe
129
Ich_war_schonmal_hier
I
optimale oscam Einstellung für Server & Client gesucht?
Antworten
11
Aufrufe
508
tem_invictus
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…