gbox811-mit-1er-weiteren-box-verbinden

[jamesbond1012]

Hallo
Habe meine DM8000 mit HD+ über gbox811 am laufen.In meiner

Sie müssen registriert sein, um Links zu sehen.

läuft Gbox811. Jetzt möchte ich gerne noch meine DM800 einbinden, das auch da meine HD+ Karte geht kann mir einer sagen was ich eintragen muss? Meine cwshare.cfg wo die Karte drin ist sieht so aus aber die DM800 bleibt dunkel

DM8000 server IP 192.168.178.22
cwshare.cfg

Spoiler

# allow maximum 06 share level for recieved card data
I: { 03 }

# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# 2* rezap after start (calling pzapit -rz --pal)
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 00 20 00 2500 4500 }

# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }

# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
# G: { 17020000 1234 }
# G: { 0B000000 ABCD }
# G: { 05021510 AB34 }
# G: { 0D03A000 A234 }

# cwshare.cfg sharing parameters
# M: { hostname { password }}
# D: { hostname { rx_port tx_port { password { loc_code net_code }}}}
#
# loc_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 0 | | | |
# +-+-+-+- level
#
# net_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 | | | | |
# | +-+-+-+- level
# +--------- drop level zero cards
# example: D: { friend1.homeip.net { 8010 8020 { B142AB11 { 05 15 }}}}
#
# password
M: { mydbox2.homeip.net { AA242456 }}

#
# Internet Friends rx tx password cod
#D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
#D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}

#
# other local boxes
#D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
#D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}
M: { 192.168.178.32 { abcd1234 }}
D: { 192.168.178.22 { 2499 2499 { a4c2b6f4 { A5 A5 }}}}


DM 800 Client IP 192.168.178.32

cwshare.cfg
# allow maximum 06 share level for recieved card data
I: { 03 }

# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# 2* rezap after start (calling pzapit -rz --pal)
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 00 20 00 2500 4500 }

# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }

# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
# G: { 17020000 1234 }
# G: { 0B000000 ABCD }
# G: { 05021510 AB34 }
# G: { 0D03A000 A234 }

# cwshare.cfg sharing parameters
# M: { hostname { password }}
# D: { hostname { rx_port tx_port { password { loc_code net_code }}}}
#
# loc_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 0 | | | |
# +-+-+-+- level
#
# net_code: bit 7 6 5 4 3 2 1 0
# 0 0 0 | | | | |
# | +-+-+-+- level
# +--------- drop level zero cards
# example: D: { friend1.homeip.net { 8010 8020 { B142AB11 { 05 15 }}}}
#
# password
M: { mydbox2.homeip.net { AA242456 }}

#
# Internet Friends rx tx password cod
#D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
#D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}

#
# other local boxes
#D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
#D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}
M: { 192.168.178.22 { b4c2b6f5 }}
D: { 192.168.178.32 { 2499 2499 { abcd1234 { A5 A5 }}}}

 

[sodex]

versuche es mal so - du hat die IP's vom Server und Client vertauscht und das Passwort auf der Client Box und Server Box sollten gleich sein - da hast du auf der Client ein anderes als auf der Server Box in der D:Line
DM8000:

Spoiler

M: { 192.168.178.22 { abcd1234 }}
D: { 192.168.178.32 { 2499 2499 { a4c2b6f4 { A5 A5 }}}}

DM800:

Spoiler

M: { 192.168.178.32 { a4c2b6f4 }}
D: { 192.168.178.22 { 2499 2499 { abcd1234 { A5 A5 }}}}

MfG sodex

 

[jamesbond1012]

hallo sodex
Super danke dir für die schnelle hilfe
jetzt läufts super