AW: GBox und OScam - Wie miteinander verbinden?
ein erster schritt ...
CardServer to Gbox v3.00 (compiled Jul 12 2011)
CS2Gbox support
[12:21:22.563] config: reading file '/var/keys/cs2gbox.cfg'
[12:21:22.581] My IP 192.168.2.24 ID 4A88 (192.168.2.24) pass ABCDE145, we are online
[12:21:22.589] IP 192.168.2.24 Port 2401-2400 ID 4488 pass ABCDEF45 sharelevel 5/5 (192.168.2.24)
newcamd: send message
0000: E0 00 00 75 73 65 72 00 24 31 24 61 62 63 64 65
0010: 66 67 68 24 31 73 30 62 76 37 2E 4F 6A 4E 69 7A
0020: 6C 72 4D 41 4F 49 51 44 37 2E 00
[12:21:25.208] login failed to cardserver (192.168.2.24:34011), wrong data length
[12:21:25.211] Total 1 UDP ports to monitor:
2401
[12:21:25.211] Entering main loop...
gbox: send message to 192.168.2.24:2400
0000: 48 49 AB CD EF 45 AB CD E1 45 01 15 30 02 04 19
0010: 19 66 00 1F 31 39 32 2E 31 36 38 2E 32 2E 32 34
0020: 0C
[12:21:25.222] -> Hello to 192.168.2.24:2400
gbox: receive message from 192.168.2.24:34119
0000: 41 C0 AB CD E1 45 AB CD EF 45 15 30 02 04 19 19
0010: 66
[12:21:26.121] comeONLINE (192.168.2.24:2400)
cs2gbox
M: { 192.168.2.24 { ABCDE145 }}
#M: { IP-Adresse des Clients { Password1 }}
D: { 192.168.2.24 { 2401 2400 { ABCDEF45 { 5 5 }}}}
#D: { IP-Adresse des Clients { TX-Port RX-Port { Password2 { 5 5 }}}}
C: { 192.168.2.24 34011 user pass 12055 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
#C: { IP-Adresse des Servers Port Benutzer Password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
cwshare
M: { 192.168.2.24 { ABCDEF45 }}
#M: { IP-Adresse des Clients { Password2 }}
D: { 192.168.2.24 { 2400 2401 { ABCDE145 { 5 5 }}}}
#D: { IP-Adresse des Clients { RX-Port TX-Port { Password1 { 5 5 }}}}
oscam.user
[account]
user = user
pwd = pass
group = 2
cccignorereshare = 0
ocsam.conf
[newcamd]
port = 34011@0500:022610
serverip = 192.168.2.24
key = 0102030405060708091011121314
mgclient = 1
oscam.reader
[reader]
label = gbox
protocol = newcamd
device = 192.168.2.24,12055
key = 0102030405060708091011121314
user = user
password = pass
caid = 0500
group = 2
audisabled = 1