E
ezflashback
Guest
Hi Leute,
ich habe einen Debian Squeeze, wo ich Oscam am Laufen habe und ich möchte intern die Keys in OScam einspeisen.
Ich hoffe, ihr könnt mir helfen!
Ich finde den Fehler nicht ...
Meine Config:
cs2gbox
cwshare
gbox_cfg
oscam.conf
oscam.reader
der gbox log
cs2gbox log
ich habe einen Debian Squeeze, wo ich Oscam am Laufen habe und ich möchte intern die Keys in OScam einspeisen.
Ich hoffe, ihr könnt mir helfen!
Ich finde den Fehler nicht ...
Meine Config:
cs2gbox
Code:
M: { 192.168.2.24 { ABCDE145 }}
#M: { IP-Adresse des Clients { Password1 }}
D: { 192.168.2.24 { 2401 2400 { ABCDEF45 { 5 5 }}}}
#D: { IP-Adresse des Clients { TX-Port RX-Port { Password2 { 5 5 }}}}
C: { 192.168.2.24 34000 cooli cooli 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }
#C: { IP-Adresse des Servers Port Benutzer Password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 }cwshare
Code:
M: { 192.168.2.24 { ABCDEF45 }}
#M: { IP-Adresse des Clients { Password2 }}
D: { 192.168.2.24 { 2400 2401 { ABCDE145 { 5 5 }}}}
#D: { IP-Adresse des Clients { RX-Port TX-Port { Password1 { 5 5 }}}}gbox_cfg
Code:
# gbox config file
# Trace, Debug
#xx yz ; xx=00 no konsole output
#xx yz ; xx=01 konsole output
#xx yz ; y=0 debug output (dont use)
#xx yz ; y=1 no debug output
#xx yz ; z=0 ouput to konsole
#xx yz ; z=1 output to /var/tmp/debug.txt
#xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 10 } 192.168.1.2 8024
# gbox working mode
#00 pure Emu
#01 pure SoftCam (when card inside), Emu (when no card inside)
#02 pure Net Client
#03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
#00 dont show any ECMs
#01 show only valid ECMs
#02 show valid and bad ECMs with complete data display
#1X show ca access
#2X use nagra aladin 1801 in betacrypt mode (for UM-I02)
C: { 02 }
# Display EMM messages on Konsole
#00 dont show any EMMs
#01 show only valid EMMs
#02 show valid and bad EMMs with complete data display
#1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 12 }
# Auto Update
#00 is ignored (default)
#01 enable AU
#02 Auto AU !!!!! always use this !!!!!
A: { 01 }
# Key Update
#01 update only new keys, default setting
#02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
#00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
#01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }
# Key files folder
#00 keyfiles in /var/keys
#01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
#00 No OSD (default)
#01 display Smartcard messages in Neutrino
#02 display Smartcard messages in Neutrino new nhttpd format
#03 display Smartcard messages in Enigma
#04 display Smartcard messages in Enigma2
O: { 00 } 192.168.0.3 coolstream
# Logger and NET-mode UDP port Init
#00 do not init UDP port
#01 Init UDP port for IP, port, UDP
L: { 01 } 192.168.0.251 7025
# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
#*x ** ; x = device nummber to be used (0= default)
#D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CWs, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
#F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
#** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
#** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
#** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
#** *z ; z=0001b (0x*1) use com1 as Multicam
#** *z ; z=0010b (0x*2) use com2 as Multicam
#** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
#** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
#** *z ; z=0100b (0x*4) invert CTS detection on com1
#** *z ; z=1000b (0x*8) invert CTS detection on com2
V: { F0 30 }
# RS232 SSSP mode
#xdebug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
R: { 00 }
# Task type
#00 ** normal mode gbox mode (no season, use Multicam instead)
#01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
#10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
#11 ** Season Emulation in a Irdeto allcam chid 1702 Z
#12 ** Season Emulation in a Irdeto allcam chid 1722 Z
#13 ** Season Emulation in a Irdeto allcam chid 1762 Z
#** *1 Com port to use for season emulatiom (1 or 2)
#** 0* Use CTS for RST detection
#** 1* Use DCD for RST detection
#** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600
# =============================================================================
# extra options to override default seting in case you expirience Problems,
# normaly these setings are not required.
# GboxTwin mode
# this options for the 2nd gbox ONLY
# you must have an extra gbox, gbox_cfg and cwshare.cfg running on /tmp,
# all other files can linked to the org. files
#F: { A6 } 5
# cpu, api, cw write method
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
#J: { 00 03 01 00 00 }
# Files, folders, devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.gbx// pmt file
#F: { 02 } /var/tmp/emm.info// key update log file
#F: { 03 } /var/tmp/ecm.info// ecm info file
#F: { 04 } /var/tmp/atack.txt// atack info file
F: { 08 } 1// pmt mode (0 - pmt file mode, 1 - pmt socket mode)
#F: { 11 } /var/keys// folder for config files
#F: { 12 } /var/tmp// folder for temporary file
#F: { 13 } /var/tmp// folder for keyfiles
#F: { 21 } /dev/null// ca device
#F: { 22 } /dev/null// dvr device
#F: { 23 } /dev/null// demux device
#F: { 31 } /dev/null// second ca device to write cw's (recording)
#F: { 41 } /dev/sci0// STB04xxx slot1
#F: { 42 } /dev/sci1// STB04xxx slot1
#F: { 43 } /dev/tts/0// rs232 com1
#F: { 44 } /dev/tts/1// rs232 com2
# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds
# force a name change of the season or sssp rs232 device
#F: { 45 } /dev/ttyS1
# set stay alive ping time in seconds (default is 300)
#F: { A0 } 300
# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
F: { A1 } 1
#Visit: www.coolstream.tooscam.conf
Code:
[newcamd]
port = 34001@0500:022610
serverip = 192.168.2.24
key = 0102030405060708091011121314
mgclient = 1oscam.reader
Code:
[reader]
label = gbox
protocol = newcamd
device = 192.168.2.24,34000
key = 0102030405060708091011121314
user = cooli
password = cooli
caid = 0500
group = 2
audisabled = 1der gbox log
Code:
strange input data in Nagra keyfile filepos 566
strange input data in Nagra keyfile filepos 613
strange input data in Nagra keyfile filepos 695
strange input data in Nagra keyfile filepos 742
strange input data in Crypto keyfile C filepos 220
strange input data in Crypto keyfile C filepos 284
strange input data in Crypto keyfile C filepos 418
strange input data in Crypto keyfile C filepos 648
strange input data in Crypto keyfile C filepos 712
strange input data in Crypto keyfile C filepos 776
strange input data in Crypto keyfile C filepos 910
Total 91 EMM keys read from nagra.txt
ReRead gbox_cfg
gbox 2.25/Linux@X86 ( May 21 2006, 18:56:23 )
Checking/Logging PW tiers on every EMM
OSD (dbox2) IP = 192.168.0.3
direct serial port i/o disabled
mode 03
AU:01/update:01/KeyFile:00 Hash:01 DispECM:02/EMM:02 UDPInit:01 OSD:00
strange input data in Seca keyfile filepos 191
strange input data in Seca keyfile filepos 226
strange input data in Seca keyfile filepos 261
strange input data in Seca keyfile filepos 296
strange input data in Seca keyfile filepos 331
strange input data in Seca keyfile filepos 366
strange input data in Seca keyfile filepos 401
strange input data in Seca keyfile filepos 436
strange input data in Seca keyfile filepos 471
strange input data in Seca keyfile filepos 533
strange input data in Seca keyfile filepos 568
strange input data in Seca keyfile filepos 603
strange input data in Nagra keyfile filepos 203
strange input data in Nagra keyfile filepos 250
strange input data in Nagra keyfile filepos 324
strange input data in Nagra keyfile filepos 371
strange input data in Nagra keyfile filepos 445
strange input data in Nagra keyfile filepos 492
strange input data in Nagra keyfile filepos 566
strange input data in Nagra keyfile filepos 613
strange input data in Nagra keyfile filepos 695
strange input data in Nagra keyfile filepos 742
strange input data in Crypto keyfile C filepos 220
strange input data in Crypto keyfile C filepos 284
strange input data in Crypto keyfile C filepos 418
strange input data in Crypto keyfile C filepos 648
strange input data in Crypto keyfile C filepos 712
strange input data in Crypto keyfile C filepos 776
strange input data in Crypto keyfile C filepos 910
Total 136 EMM keys read from nagra.txt
->Here? to 192.168.2.24 (192.168.002.024)cs2gbox log
Code:
CS2Gbox support www.satkeynet.com/forum
[11:37:18.887] config: reading file '/var/keys/cs2gbox.cfg'
[11:37:18.893] My IP 192.168.2.24 ID 4A88 (192.168.2.24) pass ABCDE145, we are online
[11:37:18.906] IP 192.168.2.24 Port 2401-2400 ID 4488 pass ABCDEF45 sharelevel 5/5 (192.168.2.24)
[11:37:18.926] cardserver 192.168.2.24/34000 NOT responding !
[11:37:18.928] Total 1 UDP ports to monitor:
2401
[11:37:18.928] Entering main loop...
gbox: send message to 192.168.2.24:2400
0000: 48 49 AB CD EF 45 AB CD E1 45 01 15 30 02 04 19
0010: 19 66 00 1F 31 39 32 2E 31 36 38 2E 32 2E 32 34
0020: 0C
[11:37:18.939] -> Hello to 192.168.2.24:2400
gbox: receive message from 192.168.2.24:49325
0000: 41 C0 AB CD E1 45 AB CD EF 45 15 30 02 04 19 19
0010: 66
[11:37:20.372] comeONLINE (192.168.2.24:2400)
[11:38:18.912] ! connection failed to cardserver 192.168.2.24/34000
[11:39:18.921] ! connection failed to cardserver 192.168.2.24/34000
... via newcamd "noch" nicht 
