# gbox config file
# Trace, Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (dont use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 11 } 192.168.1.2 8024
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 dont show any ECMs
# 01 show only valid ECMs
# 02 show valid and bad ECMs with complete data display
# 1x show ca access , display: set ca%d index=%d (pid %X) typ=%d
# 2x Map Nagra Aladin to Betacrypt , use nagra aladin 1801 in betacrypt mode (for UM-I02)
C: { 01 }
# Display EMM messages on Konsole
# 00 dont show any EMMs
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 11 }
# Auto Update
# 00 AU disable (default)
# 01 AU enable
# 02 AU auto
# 03 AU enable with ua,sa and ga filter !!!!! always use this !!!!!
A: { 03 }
# Key Update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }
# Key files folder
# 00 keyfiles in /usr/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# 04 display Smartcard messages in Enigma2
# O: { 00 } 192.168.0.3
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
# L: { 00 } 192.168.0.251 7025
# demux, multicam/comport configuration
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations (in the dbox2 the gbox writes directly the CWs, 00 is the recommended mode ! No drivers are required) use D* ** ONLY if you have Problems. 0* ** should be prefered !!!
# F* ** ; write CWs in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# V: {00 31} the 2 internal reader + an external reader SC8in1, MCR and 4in1 8in1 addressed
# V: {00 35} the 2 internal reader + an 1 external reader such Smargo, Easy Mouse, Multiprog, Multi Mouse inverted addressed
# V: {00 3F} the 2 internal reader + an USB HUB + 2 Smargos addressed
V: { 00 10 }
# RS232 SSSP mode
# x debug messages, 1=on, 0=off
# y com port to use (0=none, 1=com1, 2=com2)
# R: { 00 } 9600
# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
# W: { 00 00 } 9600
# =============================================================================
# extra options to override default setting in case you expirience Problems,
# normaly these setings are not required.
# Files, folders, devices
# folder/device comment
F: { 01 } /var/tmp/pmt.tmp // pmt file
# F: { 02 } /var/tmp/emm.info // key update log file
# F: { 03 } /var/tmp/ecm.info // ecm info file
# F: { 04 } /var/tmp/atack.txt // atack info file
# F: { 08 } 1 // pmt mode (0 - pmt file mode, 1 - pmt socket mode)
# F: { 11 } /var/keys // folder for config files
# F: { 12 } /var/tmp // folder for temporary file
# F: { 13 } /var/tmp // folder for keyfiles
# F: { 21 } /dev/null // ca device
# F: { 22 } /dev/null // dvr device
# F: { 23 } /dev/null // demux device
# F: { 31 } /dev/null // second ca device to write cw's (recording)
# F: { 41 } /dev/sci0 // STB04xxx slot1
# F: { 42 } /dev/sci1 // STB04xxx slot1
# F: { 43 } /dev/tts/0 // rs232 com1 /dev/ttyUSB0
# F: { 44 } /dev/tts/1 // rs232 com2 /dev/ttyUSB1
# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
# F: { 51 } 02 // irdeto
# F: { 52 } 03 // seca
# F: { 53 } 03 // viaccess
# F: { 54 } 03 // nagra
# F: { 55 } 03 // crypto
# F: { 57 } 03 // conax
# F: { 58 } 03 // nds
# force a name change of the season or sssp rs232 device
# F: { 45 } /dev/ttyS1
# set stay alive ping time in seconds (default is 300)
# F: { A0 } 300
# disable direct serial port I/O access on 80x86cpus (win and linux)
# direct port i/o is used to set unusual Baudrates, if you want to
# a 3.579MHz card in a 6.000MHz reader etc ...
#
# Enabled (A1=0) is the default setting, has always been !!!
#
# Disable (set to 1) it ONLY if you have problems with ioperm or you want
# to use a usb-to-rs232 smartcard reader
# F: { A1 } 1
# GboxTwin mode (only for old gbox, in gbox.net disabled)
# this options for the 2nd gbox ONLY
# you must have an extra gbox, gbox_cfg and cwshare.cfg running on /tmp,
# all other files can linked to the org. files
# F: { A6 } 5
# Server Mode
# 0 disable
# 1 enable
# F: { A4 } 1
# descrambler selection by camd.socket private descriptor (0 - index mode, 1 - mask mode), mask mode is default
# F: { AA } 1
# Debug card access output
# 0 disable (default)
# 1 simple CA trace
# 2 extended CA trace (with timing)
# F: { CA } 2