Futro und HD01 Karte bleibt dunkel

[jocras]

Hallo,
habe an meinen Futro S100 nun eine HD01+ (weisse Karte) angeschlossen an einer Easymouse. Leider wird es nicht hell.
Es kommt die Meldung: ERROR
(no entitlements)
Hier meine Datei Oscam.Server:

Spoiler

[reader]
label = HD01
description = HD01
enable = 1
protocol = mouse
device = /dev/HD01
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 0
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid = 1830
atr =
boxid =
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
deskey =
ins7e =
ins7e11 =
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 3
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 1

Die Easymouse ist eingestellt:
5V, Phoenix, 3,58 Mhz
Habt ihr vielleicht einen Tipp was ich falsch mache?
Vielen Dank.

 

[Alex]

AW: Futro und HD01 Karte bleibt dunkel

Zuerst einmal kannst du deine Config deutlich übersichtlicher machen, in dem du in der oscam.conf httpsavefullcfg = 0 einstelltst.
Desweiteren wäre ein Log vom OScam Start hilfreich, um den Fehler zu "sehen".
Löschen würd ich jedenfalls die beiden:
mhz = 368
cardmhz = 368

Diese Frequenz kann der Reader gar nicht

P.S.: hab dich mal verschoben, weil Oscam Problem und nichts Hardwarespezifisches.

al-x83

 

[supraracer]

AW: Futro und HD01 Karte bleibt dunkel

Ändere mal auf
mhz = 600

Easymouse einstellen auf 5V / Phöenix / Pfeil / 6,00
OScam neu starten und wenn es nicht geht oscam.log vom Einlesen der Karte hier posten (im Spoiler).

-supraracer

 

[janni1]

AW: Futro und HD01 Karte bleibt dunkel

Hi,

device = /dev/HD01

Hast du denn dafür auch eine udev-Rule angelegt?

Gruß
janni1

 

[jocras]

AW: Futro und HD01 Karte bleibt dunkel

Hi,
habe alles ausprobiert - leider ohne Erfolg.
Der Reader ist als HD01 angemeldet.
Hier mein Logfile:
· [FONT=&quot]2016/01/16 19:40:02 6914CFDC r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75122[/FONT]
· [FONT=&quot]2016/01/16 19:40:03 6914CFDC r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75150[/FONT]
· [FONT=&quot]2016/01/16 19:40:05 6914CFDC r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&quot]2016/01/16 19:40:05 6914CFDC r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
· [FONT=&quot]2016/01/16 19:40:05 6914CFDC r (reader) HD01 [mouse] card initializing error

Vielen Dank.
[/FONT]

 

[Alex]

AW: Futro und HD01 Karte bleibt dunkel

Die 4 Zeilen sind wenig. Hast du die Anpassung auf 6 MHz gemacht?

 

[dodo83]

AW: Futro und HD01 Karte bleibt dunkel

bitte komplettes Log ab start posten...
die Easymouse ist wie jetzt eingestellt?

 

[jocras]

AW: Futro und HD01 Karte bleibt dunkel

Hi,
habe den Reader jetzt wieder auf 6 Mhz.
Hier meine Log-Daten (ohne meine anderen 2 Karten):

Spoiler

· [FONT=&amp]2016/01/16 19:54:12 5F924487 h (reader) HD01 [mouse] Restarting reader[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 5F924487 h (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75128[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75140[/FONT]
· [FONT=&amp]2016/01/16 19:54:12 3E140954 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=600, cardmhz=600)[/FONT]
· [FONT=&amp]2016/01/16 19:54:13 3E140954 r (reader) HD01 [mouse] card detected[/FONT]
· [FONT=&amp]2016/01/16 19:54:13 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75122[/FONT]
· [FONT=&amp]2016/01/16 19:54:14 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
· [FONT=&amp]2016/01/16 19:54:15 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
· [FONT=&amp]2016/01/16 19:54:17 3E140954 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:54:17 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75129[/FONT]
· [FONT=&amp]2016/01/16 19:54:18 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75111[/FONT]
· [FONT=&amp]2016/01/16 19:54:20 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
· [FONT=&amp]2016/01/16 19:54:21 3E140954 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:54:21 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75121[/FONT]
· [FONT=&amp]2016/01/16 19:54:22 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120[/FONT]
· [FONT=&amp]2016/01/16 19:54:24 3E140954 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75115[/FONT]
· [FONT=&amp]2016/01/16 19:54:25 3E140954 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:54:25 3E140954 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
· [FONT=&amp]2016/01/16 19:54:25 3E140954 r (reader) HD01 [mouse] card initializing error[/FONT]
· [FONT=&amp]2016/01/16 19:55:51 5F924487 h (reader) HD01 [mouse] Restarting reader[/FONT]
· [FONT=&amp]2016/01/16 19:55:51 5F924487 h (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
· [FONT=&amp]2016/01/16 19:55:51 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75124[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75157[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=600, cardmhz=600)[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] card detected[/FONT]
· [FONT=&amp]2016/01/16 19:55:52 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75121[/FONT]
· [FONT=&amp]2016/01/16 19:55:53 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
· [FONT=&amp]2016/01/16 19:55:54 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75147[/FONT]
· [FONT=&amp]2016/01/16 19:55:56 0AA17899 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:55:56 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75140[/FONT]
· [FONT=&amp]2016/01/16 19:55:57 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75113[/FONT]
· [FONT=&amp]2016/01/16 19:55:59 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75117[/FONT]
· [FONT=&amp]2016/01/16 19:56:00 0AA17899 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:56:00 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
· [FONT=&amp]2016/01/16 19:56:01 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75155[/FONT]
· [FONT=&amp]2016/01/16 19:56:03 0AA17899 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120[/FONT]
· [FONT=&amp]2016/01/16 19:56:04 0AA17899 r (reader) HD01 [mouse] Error activating card.[/FONT]
· [FONT=&amp]2016/01/16 19:56:04 0AA17899 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
· [FONT=&amp]2016/01/16 19:56:04 0AA17899 r (reader) HD01 [mouse] card initializing error[/FONT]
· [FONT=&amp]2016/01/16 19:56:51 68A74AC9 c (ecm) pingu (1830@000000/0000/EF75/92:6140B78E0063A73D7101E0801865BDB8): rejected group (0 ms) (no matching reader)[/FONT]

Vielleicht könnt ihr da was rauslesen.
LG

 

[dodo83]

AW: Futro und HD01 Karte bleibt dunkel

cardmhz auf 357 einstellen, neu starten
log posten, im SPOILER bitte

 

[Alex]

AW: Futro und HD01 Karte bleibt dunkel

mhz sollte 600 sein, aber cardmhz 357

 

[jocras]

AW: Futro und HD01 Karte bleibt dunkel

Hi,
der Reader ist auf 6 Mhz eingestellt - im Web-IPC auf 357 Mhz.
Hier mein Logfile:

Spoiler

·[FONT=&amp] 2016/01/16 20:17:33 5F924487 h (reader) HD01 [mouse] Restarting reader[/FONT]
·[FONT=&amp] 2016/01/16 20:17:33 5F924487 h (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75155[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=357, cardmhz=357)[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] card detected[/FONT]
·[FONT=&amp] 2016/01/16 20:17:34 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75137[/FONT]
·[FONT=&amp] 2016/01/16 20:17:36 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75117[/FONT]
·[FONT=&amp] 2016/01/16 20:17:37 5F924487 h (webif) Reader HD01 restarted by WebIF from 192.168.1.33[/FONT]
·[FONT=&amp] 2016/01/16 20:17:37 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
·[FONT=&amp] 2016/01/16 20:17:38 2F14A8A3 r (reader) HD01 [mouse] Error activating card.[/FONT]
·[FONT=&amp] 2016/01/16 20:17:39 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75120[/FONT]
·[FONT=&amp] 2016/01/16 20:17:40 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75117[/FONT]
·[FONT=&amp] 2016/01/16 20:17:41 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75124[/FONT]
·[FONT=&amp] 2016/01/16 20:17:42 2F14A8A3 r (reader) HD01 [mouse] Error activating card.[/FONT]
·[FONT=&amp] 2016/01/16 20:17:43 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75142[/FONT]
·[FONT=&amp] 2016/01/16 20:17:44 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75114[/FONT]
·[FONT=&amp] 2016/01/16 20:17:45 2F14A8A3 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75116[/FONT]
·[FONT=&amp] 2016/01/16 20:17:46 2F14A8A3 r (reader) HD01 [mouse] Error activating card.[/FONT]
·[FONT=&amp] 2016/01/16 20:17:47 2F14A8A3 r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
·[FONT=&amp] 2016/01/16 20:17:47 2F14A8A3 r (reader) HD01 [mouse] card initializing error

LG
[/FONT]

 

[joopastron]

AW: Futro und HD01 Karte bleibt dunkel

Du musst im Reader unter mhz 600 einstellen, cardmhz auf 357.
Easymouse auf 6 MHz lassen.

Oder diesen hier über Files kopieren.

[reader]
label                         = HD+
description                   = Astra HD+
protocol                      = mouse
device                        = /dev/HD01
caid                          = 1830
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ecmwhitelist                  = 1830:92
ecmheaderwhitelist            = 80308F078D,81308F078D
detect                        = cd
mhz                           = 600
group                         = 1
emmcache                      = 1,3,2,0
blockemm-unknown              = 1

 

[jocras]

AW: Futro und HD01 Karte bleibt dunkel

Hi,
die Files habe ich kopiert in die oscam.server. Der Reader steht auf 6 Mhz.
Geht leider noch nicht.
Hier meine log-daten:

Spoiler

• [FONT=&amp]2016/01/16 22:30:46 0552DBF0 r (reader) HD01 [mouse] creating thread for device /dev/HD01[/FONT]
• [FONT=&amp]2016/01/16 22:30:46 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75126[/FONT]
• [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75116[/FONT]
• [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=357, cardmhz=357)[/FONT]
• [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] card detected[/FONT]
• [FONT=&amp]2016/01/16 22:30:47 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75126[/FONT]
• [FONT=&amp]2016/01/16 22:30:49 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75123[/FONT]
• [FONT=&amp]2016/01/16 22:30:50 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75118[/FONT]
• [FONT=&amp]2016/01/16 22:30:51 4A0DE77F r (reader) HD01 [mouse] Error activating card.[/FONT]
• [FONT=&amp]2016/01/16 22:30:52 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75124[/FONT]
• [FONT=&amp]2016/01/16 22:30:53 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75119[/FONT]
• [FONT=&amp]2016/01/16 22:30:54 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75132[/FONT]
• [FONT=&amp]2016/01/16 22:30:55 4A0DE77F r (reader) HD01 [mouse] Error activating card.[/FONT]
• [FONT=&amp]2016/01/16 22:30:56 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75125[/FONT]
• [FONT=&amp]2016/01/16 22:30:57 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75121[/FONT]
• [FONT=&amp]2016/01/16 22:30:58 4A0DE77F r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75118[/FONT]
• [FONT=&amp]2016/01/16 22:30:59 4A0DE77F r (reader) HD01 [mouse] Error activating card.[/FONT]
• [FONT=&amp]2016/01/16 22:31:00 4A0DE77F r (reader) HD01 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1[/FONT]
• [FONT=&amp]2016/01/16 22:31:00 4A0DE77F r (reader) HD01 [mouse] card initializing error

• [/FONT]

LG

 

[supraracer]

AW: Futro und HD01 Karte bleibt dunkel

Steckt die Karte wirklich richtig herum im Reader?

-supraracer

 

[jocras]

AW: Futro und HD01 Karte bleibt dunkel

Hi,
ja - Chip unten vorne im Reader.
LG