Freezer Probleme

[Pilot]

AW: Freezer Probleme

Das steht bei dir im oscam.server beim reader: mhz = 600
Deine esymuse2 muß dementsprechend eingerichttet sein.
Hab leider keine easymouse2 mehr.
Muß mal nach den Einstellungen googeln.

Frage nochmal: wie lautet die Oscam Version auf dem Server.
Die muß für einen feezerfreien Lauf mindestens 9848 sein.

 

[storfosna]

AW: Freezer Probleme

Mit der Easymouse verlobt? Der ist gut ..
Karte ist mit der sky-HW verlobt, die Du bekommen hast.

Es kann passieren, dass es mit der nächsten Verlängerung dann vorbei ist.

Ich habe gerade vor ein paar Tagen meine emms gepostet weil ich verlängern musste.
User Stefan4u hielt den emm für ziemlich unbedenklich, und ich habe damit bis Ende September verlängert.
Meinst du das es dann beim nächsten Mal Probleme geben könnte ? Meine V13 hat Den Zwangs Receiver von Sky nie gesehen. Aktiviert habe ich die V13 damals vor einigen Jahren in einem Humax Receiver.

 

[webman2]

AW: Freezer Probleme

Alles kann, nichts muss.

Kann ja sein, dass Du fusebyte = 25 schon früher bekommenn hast.
Wenn bisher alles gut gegangen ist, sollte man dann nicht schwarz sehen - im wahrsten Sinne des Wortes.

 

[storfosna]

AW: Freezer Probleme

Ja das ist so richtig mhz 600 beim Reader, vielleicht fehlt noch Card mhz ????
oscam Version ist ziemlich aktuell r10899

- - - - - - - - - -

Alles kann, nichts muss.

Kann ja sein, dass Du fusebyte = 25 schon früher bekommenn hast.
Wenn bisher alles gut gegangen ist, sollte man dann nicht schwarz sehen - im wahrsten Sinne des Wortes.

ja genau, das wäre gar nicht gut.

 

[Pilot]

AW: Freezer Probleme

easmouse2 Einstellungen:
- https://www.digital-eliteboard.com/177997-einstellungen-der-easymouse2-mit-cccam-oscam.html
dazu die Einstellungen für eine S02 Karte nehmen.

 

[storfosna]

AW: Freezer Probleme

easmouse2 Einstellungen:
- https://www.digital-eliteboard.com/177997-einstellungen-der-easymouse2-mit-cccam-oscam.html
dazu die Einstellungen für eine S02 Karte nehmen.

du meinst ich soll die Einstellungen einer S02 Karte für meine V13 Karte übernehmen und testen ?

 

[Pilot]

AW: Freezer Probleme

Gena: so sollst du es testen.
Ansonsten die einstellungen im externen reader nach den Einstullungen für eine V13 Karte vornehmen.
Dann aber im oscam.server bei mhz auf 357 stellen.
oscam neu starten.

 

[storfosna]

AW: Freezer Probleme

Hallo Pilot, wenn ich im oscam.server mhz auf 357 stelle kommt folgender Log

Spoiler

>> OSCam << cardserver log switched at Mon Aug 3 07:27:02 2015
-------------------------------------------------------------------------------
2015/08/03 07:27:02 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10899 (arm-linux-gnueabihf)
2015/08/03 07:27:02 00000000 s (main) System name = Linux
2015/08/03 07:27:02 00000000 s (main) Host name = raspberrypi
2015/08/03 07:27:02 00000000 s (main) Release = 3.6.11+
2015/08/03 07:27:02 00000000 s (main) Version = #408 PREEMPT Wed Apr 10 20:33:39 BST 2013
2015/08/03 07:27:02 00000000 s (main) Machine = armv6l
2015/08/03 07:27:02 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4376
2015/08/03 07:27:02 00000000 s (config) services reloaded: 0 services freed, 12 services loaded, rejected 0
2015/08/03 07:27:02 00000000 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/08/03 07:27:02 00000000 s (main) signal handling initialized
2015/08/03 07:27:02 00000000 s (config) 10 provid's loaded
2015/08/03 07:27:02 00000000 s (config) 161 service-id's loaded in 4 ms
2015/08/03 07:27:02 00000000 s (config) 242 tier-id's loaded
2015/08/03 07:27:02 00000000 s (net) monitor: initialized (fd=5, port=988, ip=192.168.178.37)
2015/08/03 07:27:02 00000000 s (net) newcamd: initialized (fd=6, port=22000, ip=192.168.178.37)
2015/08/03 07:27:02 00000000 s (net) -> CAID: 1830 PROVID: 003411
2015/08/03 07:27:02 00000000 s (net) cccam: initialized (fd=7, port=8958, ip=192.168.178.37)
2015/08/03 07:27:02 00000000 s (reader) skyv13 [mouse] creating thread for device /dev/ttyUSB0
2015/08/03 07:27:02 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/03 07:27:02 00000000 s (main) waiting for local card init
2015/08/03 07:27:03 4701A1C2 h (webif) webif: decompressed 162723 bytes back into 388484 bytes
2015/08/03 07:27:03 4701A1C2 h (webif) HTTP Server running. ip=192.168.178.37 port=84
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75246
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 1 value f1 time_us 2718
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 2 value f0 time_us 71834
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 3 value 78 time_us 863
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 4 value 77 time_us 847
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 5 value ed time_us 1808
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 6 value 7f time_us 886
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 7 value ed time_us 863
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 8 value 2e time_us 1876
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 9 value f0 time_us 840
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 10 value 1c time_us 860
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 11 value ec time_us 1820
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 12 value ff time_us 1627
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 13 value 7f time_us 629
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 14 value f7 time_us 654
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 15 value ff time_us 677
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Flush readed byte Nr 16 value f8 time_us 1612
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Buffers readed 16 bytes total time_us 169276
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/08/03 07:27:03 0923A02A r (reader) skyv13 [mouse] card detected
2015/08/03 07:27:04 0923A02A r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75194
2015/08/03 07:27:05 0923A02A r (reader) skyv13 [mouse] ATR: F1 F0 7D 77 ED 7F ED 2E F0 1C
2015/08/03 07:27:05 0923A02A r (reader) skyv13 [mouse] ERROR: Could not read reader->convention
2015/08/03 07:27:05 0923A02A r (reader) skyv13 [mouse] Error activating card.
2015/08/03 07:27:05 0923A02A r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75585
2015/08/03 07:27:06 0923A02A r (reader) skyv13 [mouse] ATR: F1 F0 7D 77 ED 7F ED 2E F0 1C
2015/08/03 07:27:06 0923A02A r (reader) skyv13 [mouse] ERROR: Could not read reader->convention
2015/08/03 07:27:06 0923A02A r (reader) skyv13 [mouse] Error activating card.
2015/08/03 07:27:07 0923A02A r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75199
2015/08/03 07:27:08 0923A02A r (reader) skyv13 [mouse] ATR: F1 F0 7D 77 ED 7F ED 2E F0 1C
2015/08/03 07:27:08 0923A02A r (reader) skyv13 [mouse] ERROR: Could not read reader->convention
2015/08/03 07:27:08 0923A02A r (reader) skyv13 [mouse] Error activating card.
2015/08/03 07:27:09 0923A02A r (reader) skyv13 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/08/03 07:27:09 0923A02A r (reader) skyv13 [mouse] card initializing error
2015/08/03 07:27:09 00000000 s (main) init for all local cards done
2015/08/03 07:27:09 00000000 s (emmcache) loaded 1 emmcache records from /var/etc/oscam.emmcache in 0 ms
2015/08/03 07:27:09 00000000 s (emmcache) loaded 1 emmstat records from /var/etc/oscam.emmstat in 1 ms
2015/08/03 07:27:09 00000000 s (anticasc) anti cascading disabled
2015/08/03 07:27:09 2E5EC9DC c (client) anonymous disconnected from xxxxxxxx
2015/08/03 07:27:09 3311CC97 c (client) anonymous disconnected from xxxxxxxx
2015/08/03 07:27:09 754A7714 c (client) anonymous disconnected from xxxxxx
2015/08/03 07:27:09 1A98E345 c (client) encrypted cccam-client xxxxxxxxxx granted (xxxxxxxxx, au=off)
2015/08/03 07:27:09 51B8CAA9 c (client) encrypted cccam-client xxxxxxxxxx granted (xxxxxxxxx, au=off)
2015/08/03 07:27:09 3B3FD76F c (client) encrypted cccam-client xxxxxxxxxx granted (xxxxxxxx, au=off)
2015/08/03 07:27:09 2929F5A7 c (client) encrypted cccam-client xxxxxxxxxx granted (xxxxxxxxxx, au=off)
2015/08/03 07:27:19 2E5EF659 c (client) encrypted cccam-client xxxxxxxxxxx granted (xxxxxxxx, au=on (1 reader))
2015/08/03 07:27:19 0F2EE539 c (client) encrypted cccam-client xxxxxxxxxx granted (lxxxxxxxxx, au=off)
2015/08/03 07:27:19 5ED00013 c (client) encrypted cccam-client xxxxxxxxx granted (fxxxxxxxxx, au=off)
2015/08/03 07:27:23 2E5EF659 c (ecm) xxxxxxxx (09C4@000000/0C20/006C/B3:9EE69235AF47C63F49A48FB106435606): rejected group (0 ms) - Sky Sport News HD (no matching reader)
2015/08/03 07:27:30 2E5EF659 c (ecm) xxxxxxxx (09C4@000000/0C20/006C/B3:5FDE7AE16AA32E9617D4CD6CFBE5836F): rejected group (0 ms) - Sky Sport News HD (no matching reader)
2015/08/03 07:27:37 2E5EF659 c (ecm) xxxxxxxx (09C4@000000/0C20/006C/B3:B154D9DBB0A7289755292C29F29C69CF): rejected group (1 ms) - Sky Sport News HD (no matching rea

wenn ich an der Easymouse von 3,3 Volt auf 5 Volt stelle kommt folgender Log

Spoiler

>> OSCam << cardserver log switched at Mon Aug 3 07:39:03 2015
-------------------------------------------------------------------------------
2015/08/03 07:39:03 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10899 (arm-linux-gnueabihf)
2015/08/03 07:39:03 00000000 s (main) System name = Linux
2015/08/03 07:39:03 00000000 s (main) Host name = raspberrypi
2015/08/03 07:39:03 00000000 s (main) Release = 3.6.11+
2015/08/03 07:39:03 00000000 s (main) Version = #408 PREEMPT Wed Apr 10 20:33:39 BST 2013
2015/08/03 07:39:03 00000000 s (main) Machine = armv6l
2015/08/03 07:39:03 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5615
2015/08/03 07:39:03 00000000 s (config) services reloaded: 0 services freed, 12 services loaded, rejected 0
2015/08/03 07:39:03 00000000 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/08/03 07:39:03 00000000 s (main) signal handling initialized
2015/08/03 07:39:03 00000000 s (config) 10 provid's loaded
2015/08/03 07:39:03 00000000 s (config) 161 service-id's loaded in 4 ms
2015/08/03 07:39:03 00000000 s (config) 242 tier-id's loaded
2015/08/03 07:39:03 00000000 s (net) monitor: initialized (fd=5, port=988, ip=192.168.178.37)
2015/08/03 07:39:03 00000000 s (net) newcamd: initialized (fd=6, port=22000, ip=192.168.178.37)
2015/08/03 07:39:03 00000000 s (net) -> CAID: 1830 PROVID: 003411
2015/08/03 07:39:03 00000000 s (net) cccam: initialized (fd=7, port=8958, ip=192.168.178.37)
2015/08/03 07:39:03 00000000 s (reader) skyv13 [mouse] creating thread for device /dev/ttyUSB0
2015/08/03 07:39:03 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/03 07:39:03 00000000 s (main) waiting for local card init
2015/08/03 07:39:03 59F71063 h (webif) webif: decompressed 162723 bytes back into 388484 bytes
2015/08/03 07:39:03 59F71063 h (webif) HTTP Server running. ip=192.168.178.37 port=84
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75244
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 1 value 03 time_us 2328
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 2 value 00 time_us 66836
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 3 value 77 time_us 864
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 4 value 5b time_us 853
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 5 value 3f time_us 859
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 6 value f7 time_us 843
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 7 value fe time_us 847
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 8 value 7d time_us 603
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 9 value f2 time_us 632
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 10 value 1f time_us 633
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 11 value 69 time_us 655
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 12 value 00 time_us 73
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 13 value ad time_us 98
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 14 value f5 time_us 608
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 15 value f1 time_us 637
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 16 value ff time_us 604
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 17 value ff time_us 622
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 18 value f5 time_us 635
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 19 value 73 time_us 636
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 20 value 7f time_us 641
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 21 value ff time_us 664
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Flush readed byte Nr 22 value 77 time_us 638
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Buffers readed 22 bytes total time_us 163881
2015/08/03 07:39:03 0AEECE10 r (reader) skyv13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2015/08/03 07:39:04 0AEECE10 r (reader) skyv13 [mouse] card detected
2015/08/03 07:39:04 0AEECE10 r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75210
2015/08/03 07:39:05 0AEECE10 r (reader) skyv13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/08/03 07:39:05 0AEECE10 r (reader) skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/08/03 07:39:05 0AEECE10 r (reader) skyv13 [mouse] Setting baudrate to 9600 bps
2015/08/03 07:39:05 0AEECE10 r (reader) skyv13 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2015/08/03 07:39:05 0AEECE10 r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75189
2015/08/03 07:39:05 0AEECE10 r (reader) skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [mouse] Card type: P1TV
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [mouse] Rom version: 10A7
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [mouse] Unable to get smartcard credit
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [mouse] found card system videoguard2
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [videoguard2] card detected
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/08/03 07:39:07 0AEECE10 r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75282
2015/08/03 07:39:08 0AEECE10 r (reader) skyv13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/08/03 07:39:08 0AEECE10 r (reader) skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/08/03 07:39:08 0AEECE10 r (reader) skyv13 [mouse] Setting baudrate to 153600 bps
2015/08/03 07:39:08 0AEECE10 r (reader) skyv13 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
2015/08/03 07:39:08 0AEECE10 r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75213
2015/08/03 07:39:08 0AEECE10 r (reader) skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] Card type: P1TV
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] Rom version: 10A7
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] Unable to get smartcard credit
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] FuseByte: 25
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] Region Code: 00BO0102
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] Country Code: DEU
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] Pincode read: 5596
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] PCB settings: FF FF FF FF
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] ready for requests
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [mouse] found card system videoguard2
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] card detected
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] ------------------------------------------------------------------
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] +---------+----------+---------------------+---------------------+
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0058 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0056 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0057 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 007b --| 2015/09/25-01:00:00 | National Geographic HD
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 007d --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0081 --| 2015/09/25-01:00:00 | Sky Sport HD 1
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 008e --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00ca --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00d4 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00fa --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/09/25-01:00:00 |
2015/08/03 07:39:09 0AEECE10 r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00ff --| 2015/09/25-01:00:00 |
2015/08/03 07:39:10 0AEECE10 r (reader) skyv13 [videoguard2] ------------------------------------------------------from-ins70--
2015/08/03 07:39:10 00000000 s (main) init for all local cards done
2015/08/03 07:39:10 00000000 s (emmcache) loaded 1 emmcache records from /var/etc/oscam.emmcache in 0 ms
2015/08/03 07:39:10 00000000 s (emmcache) loaded 1 emmstat records from /var/etc/oscam.emmstat in 1 ms
2015/08/03 07:39:10 00000000 s (anticasc) anti cascading disabled
2015/08/03 07:39:10 35D288F3 c (client) anonymous disconnected from 77.21.118.98
2015/08/03 07:39:11 10852716 c (client) encrypted cccam-client granted (, au=off)
2015/08/03 07:39:11 29C854A5 c (client) encrypted cccam-client granted (, au=off)
2015/08/03 07:39:11 31E33017 c (client) encrypted cccam-client granted (, au=off)
2015/08/03 07:39:11 338FEE86 c (client) encrypted cccam-client granted (, au=off)
2015/08/03 07:39:11 766FF2C9 c (client) encrypted cccam-client granted (, au=off)
2015/08/03 07:39:11 2FDDF9C6 c (client) encrypted cccam-client granted (, au=off)
2015/08/03 07:39:21 02A2EF65 c (client) encrypted cccam-client granted (, au=on (1 reader))
2015/08/03 07:39:25 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3:C8691488822295DDA070DD9141832141): found (142 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:39:32 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3:F897CE0144E842A6DDCE30E30B347349): found (117 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:39:39 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3:5C0D3E67F7DE4BBD455DDE28392CAEB2): found (117 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:39:46 02A2EF65 c (ecm) xxxxxxxxxx (09C4@000000/0C20/006C/B3:528FE5FC5E498CEA7534B2D55DC6CA62): found (116 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:39:52 02A2EF65 c (reader) skyv13 [videoguard2] ERROR: Cannot open file '/var/log/ipc/emmlog/skyv13_unique_emm.log' (errno=2: No such file or directory)

2015/08/03 07:39:53 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3:90BB2B8167F1282EF805D911B51B5B29): found (115 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:40:00 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3:98458BECDD9419FE75CF521A3614F329): found (117 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:40:07 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3:703FBCE05D598467E3A784502B9BC831): found (117 ms) by skyv13 - Sky Sport News HD
2015/08/03 07:40:14 02A2EF65 c (ecm) xxxxxxxxx (09C4@000000/0C20/006C/B3924980F5635C893A5E8650255CA191A): found (116 ms) by skyv13 - Sky Sport News HD

ich lasse mal so laufen, und beobachte was passiert.

hat nix gebracht, geht schon wieder los mit den Freezern

Spoiler

• 2015/08/03 07:55:59 02A2EF65 c (ecm) (09C4@000000/0C20/006C/B3:5C973A2D81F423317E2FA8639FA17D6A): found (116 ms) by skyv13 - Sky Sport News HD
• 2015/08/03 07:56:13 7C9899EB c (client) encrypted cccam-client granted (, au=on (1 reader))
• 2015/08/03 07:56:13 02A2EF65 c (client) disconnected from
• 2015/08/03 07:56:20 7C9899EB c (ecm) (09C4@000000/0C20/006C/B3:9A092C22785800C44B9BBF03D4AC7A4C): found (118 ms) by skyv13 - Sky Sport News HD

 

[storfosna]

AW: Freezer Probleme

ich habe im jetz im oscam.server noch cardmhz = 357 eingefügt, vielleicht könnte da der Fehler liegen ?

Spoiler

>> OSCam << cardserver log switched at Mon Aug 3 08:03:02 2015
-------------------------------------------------------------------------------
2015/08/03 08:03:02 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10899 (arm-linux-gnueabihf)
2015/08/03 08:03:02 00000000 s (main) System name = Linux
2015/08/03 08:03:02 00000000 s (main) Host name = raspberrypi
2015/08/03 08:03:02 00000000 s (main) Release = 3.6.11+
2015/08/03 08:03:02 00000000 s (main) Version = #408 PREEMPT Wed Apr 10 20:33:39 BST 2013
2015/08/03 08:03:02 00000000 s (main) Machine = armv6l
2015/08/03 08:03:02 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 8848
2015/08/03 08:03:02 00000000 s (config) services reloaded: 0 services freed, 12 services loaded, rejected 0
2015/08/03 08:03:02 00000000 s (config) userdb reloaded: 11 accounts loaded, 0 expired, 0 disabled
2015/08/03 08:03:02 00000000 s (main) signal handling initialized
2015/08/03 08:03:02 00000000 s (config) 10 provid's loaded
2015/08/03 08:03:02 00000000 s (config) 161 service-id's loaded in 3 ms
2015/08/03 08:03:02 00000000 s (config) 242 tier-id's loaded
2015/08/03 08:03:02 00000000 s (net) monitor: initialized (fd=5, port=988, ip=192.168.178.37)
2015/08/03 08:03:02 00000000 s (net) newcamd: initialized (fd=6, port=22000, ip=192.168.178.37)
2015/08/03 08:03:02 00000000 s (net) -> CAID: 1830 PROVID: 003411
2015/08/03 08:03:02 00000000 s (net) cccam: initialized (fd=7, port=8958, ip=192.168.178.37)
2015/08/03 08:03:02 00000000 s (reader) skyv13 [mouse] creating thread for device /dev/ttyUSB0
2015/08/03 08:03:02 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/03 08:03:02 00000000 s (main) waiting for local card init
2015/08/03 08:03:02 05088794 h (webif) webif: decompressed 162723 bytes back into 388484 bytes
2015/08/03 08:03:02 05088794 h (webif) HTTP Server running. ip=192.168.178.37 port=84
2015/08/03 08:03:02 2A3C6EEB r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75258
2015/08/03 08:03:02 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 1 value 03 time_us 2280
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 2 value 00 time_us 71860
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 3 value 57 time_us 814
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 4 value 5b time_us 845
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 5 value 3f time_us 80
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 6 value f7 time_us 694
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 7 value fe time_us 848
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 8 value 7d time_us 848
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 9 value f2 time_us 867
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 10 value 1f time_us 830
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 11 value 69 time_us 869
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 12 value 00 time_us 837
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 13 value ad time_us 868
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 14 value f5 time_us 622
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 15 value f1 time_us 633
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 16 value ff time_us 629
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 17 value ff time_us 630
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 18 value f5 time_us 635
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 19 value 73 time_us 73
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 20 value 7f time_us 95
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 21 value ff time_us 502
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Flush readed byte Nr 22 value 57 time_us 658
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Buffers readed 22 bytes total time_us 167842
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] card detected
2015/08/03 08:03:03 2A3C6EEB r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 74883
2015/08/03 08:03:05 2A3C6EEB r (reader) skyv13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/08/03 08:03:05 2A3C6EEB r (reader) skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/08/03 08:03:05 2A3C6EEB r (reader) skyv13 [mouse] Setting baudrate to 9600 bps
2015/08/03 08:03:05 2A3C6EEB r (reader) skyv13 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2015/08/03 08:03:05 2A3C6EEB r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75176
2015/08/03 08:03:05 2A3C6EEB r (reader) skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [mouse] Card type: P1TV
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [mouse] Rom version: 10A7
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [mouse] Unable to get smartcard credit
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [mouse] found card system videoguard2
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [videoguard2] card detected
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/08/03 08:03:06 2A3C6EEB r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75195
2015/08/03 08:03:07 2A3C6EEB r (reader) skyv13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/08/03 08:03:07 2A3C6EEB r (reader) skyv13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/08/03 08:03:07 2A3C6EEB r (reader) skyv13 [mouse] Setting baudrate to 153600 bps
2015/08/03 08:03:07 2A3C6EEB r (reader) skyv13 [mouse] Calculated work ETU is 3.88 us reader mhz = 600
2015/08/03 08:03:07 2A3C6EEB r (reader) skyv13 [mouse] Buffers readed 0 bytes total time_us 75278
2015/08/03 08:03:07 2A3C6EEB r (reader) skyv13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
2015/08/03 08:03:08 2A3C6EEB r (reader) skyv13 [mouse] Card type: P1TV
2015/08/03 08:03:08 2A3C6EEB r (reader) skyv13 [mouse] Rom version: 10A7
2015/08/03 08:03:08 2A3C6EEB r (reader) skyv13 [mouse] Unable to get smartcard credit
2015/08/03 08:03:08 2A3C6EEB r (reader) skyv13 [mouse] FuseByte: 25
2015/08/03 08:03:08 2A3C6EEB r (reader) skyv13 [mouse] Region Code: 00BO0102
2015/08/03 08:03:08 2A3C6EEB r (reader) skyv13 [mouse] Country Code: DEU
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [mouse] Pincode read: 5596
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [mouse] PCB settings: FF FF FF FF
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [mouse] ready for requests
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [mouse] found card system videoguard2
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] card detected
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] ------------------------------------------------------------------
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] +---------+----------+---------------------+---------------------+
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0058 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0056 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0057 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 007b --| 2015/09/25-01:00:00 | National Geographic HD
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 007d --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 0081 --| 2015/09/25-01:00:00 | Sky Sport HD 1
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 008e --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00ca --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00d4 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00fa --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] |-- 00 ---|-- 00ff --| 2015/09/25-01:00:00 |
2015/08/03 08:03:09 2A3C6EEB r (reader) skyv13 [videoguard2] ------------------------------------------------------from-ins70--
2015/08/03 08:03:10 00000000 s (main) init for all local cards done
2015/08/03 08:03:10 00000000 s (emmcache) loaded 1 emmcache records from /var/etc/oscam.emmcache in 0 ms
2015/08/03 08:03:10 00000000 s (emmcache) loaded 1 emmstat records from /var/etc/oscam.emmstat in 0 ms
2015/08/03 08:03:10 00000000 s (anticasc) anti cascading disabled
2015/08/03 08:03:10 3BF4F14D c (client) anonymous disconnected
2015/08/03 08:03:10 79E56BF5 c (client) anonymous disconnected
2015/08/03 08:03:10 6470102B c (client) encrypted cccam-client , au=on (1 reader))
2015/08/03 08:03:10 6981672F c (client) encrypted cccam-client , au=off)
2015/08/03 08:03:10 02814955 c (client) encrypted cccam-client , au=off)
2015/08/03 08:03:10 266AE9A9 c (client) encrypted cccam-client , au=off)
2015/08/03 08:03:10 57E7CA4E c (client) encrypted cccam-client , au=off)
2015/08/03 08:03:13 6470102B c (ecm) (09C4@000000/0C20/006C/B3:ACFF2C2F6CFF7A7370B36B51EEFC4AC6): found (140 ms) by skyv13 - Sky Sport News HD

hat auch nichts gebracht gerade wieder Aussetzer

 

[DarkStarXxX]

AW: Freezer Probleme

Die Freezer kommen auch nicht durch deine Karte.
Sondern dadurch das deine Clients vom Server getrennt werden und sich wieder anmelden müssen.
Das deutet auf Internet Probleme hin.

 

[storfosna]

AW: Freezer Probleme

DarkStarXxX,

aber im Log kann ich doch sehen, das ich getrennt werde, encrypted cccam-client granted, disconnected from.....
Da ist von anderen Clients nichts zu sehen im Logfile ?!

 

[DarkStarXxX]

AW: Freezer Probleme

Ja und?
Wenn du am Server nicht verbunden bist wie soll dann eine Entschlüsselung stattfinden?

 

[storfosna]

AW: Freezer Probleme

Das ist genau das was ich auch vermute. ( Internet Problem bei mir )
Weil die Probleme anfingen nachdem ich von Kabel Deutschland auf IPv6 umgestellt wurde.
Vorher mit IPv4 lief alles bestens !!!
Dann wird wahrscheinlich da irgendwo die Ursache liegen !?
Das war eigentlich auch meine erste Frage ob schon jemand etwas ähnliches erlebt hat, und evtl. schon eine Lösung gefunden hat.
Vielleicht kann man an der Fritzbox irgend etwas umstellen oder einstellen ??
Wie es aussieht bin ich selbst der einzige Client der sich alle paar Minuten abmeldet und wieder anmeldet !?

 

[storfosna]

AW: Freezer Probleme

Hallo,

erstmal Danke für Eure zahlreichen Tips !!!
Leider ist bis jetzt trotz der vielen guten Ratschläge der Durchbruch nicht geschafft.
Die Freezer treten bei mir weiterhin in unregelmäßigen Abständen auf.

Hat vielleicht noch jemand eine Idee, einen Rat oder einen Vorschlag was ich noch versuchen könnte ?
Das sollte doch irgendwie in den Griff zu bekommen sein, oder ?

Danke
Gruß
storfosna