frage wegen cs

axel · 4. November 2017

Hi,

poste bitte mal alle aktuellen Konfigs + Log ab Start Oscam.

Edit: Sehe ich jetzt. Fehlt der Dvbapi Eintrag, nur überflogen.

Gruß

Gesendet von meinem SM-G920F mit Tapatalk

karl3124 · 4. November 2017

2017/11/04 16:51:26 00000000 s (main) System name = Linux
2017/11/04 16:51:26 00000000 s (main) Host name = dm8000
2017/11/04 16:51:26 00000000 s (main) Release = 3.2-dm8000
2017/11/04 16:51:26 00000000 s (main) Version = #1 SMP Mon Mar 16 20:58:18 UTC 2015
2017/11/04 16:51:26 00000000 s (main) Machine = mips
2017/11/04 16:51:26 00000000 s (main) Stb model = dm8000
2017/11/04 16:51:26 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4901
2017/11/04 16:51:26 00000000 s (emu) OSCam-Emu version 741
2017/11/04 16:51:26 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2017/11/04 16:51:26 00000000 s (main) signal handling initialized
2017/11/04 16:51:26 00000000 s (config) 299 service-id's loaded in 7 ms
2017/11/04 16:51:26 00000000 s (config) 43 tier-id's loaded
2017/11/04 16:51:26 00000000 s (net) cs357x: initialized (fd=8, port=4567)
2017/11/04 16:51:26 00000000 s (net) cccam: initialized (fd=9, port=21029, ip=10.0.0.20)
2017/11/04 16:51:26 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2017/11/04 16:51:26 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2017/11/04 16:51:26 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2017/11/04 16:51:26 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2017/11/04 16:51:26 00000000 s (reader) v14 [internal] creating thread for device /dev/sci1
2017/11/04 16:51:26 00000000 s (reader) emulator [emu] creating thread for device emulator
2017/11/04 16:51:26 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/11/04 16:51:26 00000000 s (main) waiting for local card init
2017/11/04 16:51:26 3BBEBAC6 r (emu) Key file not found in: /var/tuxbox/config
2017/11/04 16:51:26 3BBEBAC6 r (emu) Reading key file: /var/keys/SoftCam.Key
2017/11/04 16:51:26 00000000 (emu) INFO: FFDecsa parallel mode = 64
2017/11/04 16:51:26 3BBEBAC6 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/11/04 16:51:26 555D518F r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/11/04 16:51:26 555D518F r (reader) v14 [internal] Reader sci internal, detected box type: dm8000
2017/11/04 16:51:26 3112CCC9 h (webif) webif: decompressed 178435 bytes back into 440328 bytes
2017/11/04 16:51:26 3112CCC9 h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2017/11/04 16:51:27 3BBEBAC6 r (reader) emulator [emu] card detected
2017/11/04 16:51:28 3BBEBAC6 r (reader) emulator [emu] found card system emu
2017/11/04 16:51:28 3BBEBAC6 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/04 16:51:28 3BBEBAC6 r (emu) Key file not found in: /var/tuxbox/config
2017/11/04 16:51:28 3BBEBAC6 r (emu) Reading key file: /var/keys/SoftCam.Key
2017/11/04 16:51:28 00000000 s (main) init for all local cards done
2017/11/04 16:51:28 0E4913FD c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2017/11/04 16:51:28 0E4913FD c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2017/11/04 16:51:28 0E4913FD c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0065 PROVID: 000000
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 0067 PROVID: 000000
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 00FB PROVID: 000000
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 00FD PROVID: 000000
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 01E1 PROVID: 000000
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098C ECM_PID: 01EB PROVID: 000000
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in caPMT
2017/11/04 16:51:28 0E4913FD c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/11/04 16:51:32 0E4913FD c (dvbapi) Demuxer 0 stop descrambling program number 32C9 (0648@000000:32C9 unknown)
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0066 PROVID: 000000
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 0068 PROVID: 000000
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 00FC PROVID: 000000
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 00FE PROVID: 000000
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 01E2 PROVID: 000000
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098C ECM_PID: 01EC PROVID: 000000
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in caPMT
2017/11/04 16:51:33 0E4913FD c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/11/04 16:51:37 0E4913FD c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 stop descrambling program number 32CA (0648@000000:32CA unknown)
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0065 PROVID: 000000
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 0067 PROVID: 000000
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 00FB PROVID: 000000
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 00FD PROVID: 000000
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 01E1 PROVID: 000000
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098C ECM_PID: 01EB PROVID: 000000
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in caPMT
2017/11/04 16:51:40 0E4913FD c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/11/04 16:51:45 0E4913FD c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/11/04 16:51:51 555D518F r (-) -- Skipped 1 duplicated log lines --
2017/11/04 16:51:51 555D518F r (reader) v14 [internal] card detected
2017/11/04 16:51:52 555D518F r (reader) v14 [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/04 16:51:52 555D518F r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75194
2017/11/04 16:51:52 555D518F r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/04 16:51:52 555D518F r (reader) v14 [internal] Calculated work ETU is 41.33 us reader mhz = 450
2017/11/04 16:51:52 555D518F r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75192
2017/11/04 16:51:53 555D518F r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2017/11/04 16:51:54 555D518F r (reader) v14 [internal] card detected
2017/11/04 16:51:54 555D518F r (reader) v14 [internal] type: CryptoWorks
2017/11/04 16:51:54 555D518F r (reader) v14 [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
2017/11/04 16:51:54 555D518F r (reader) v14 [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2017/11/04 16:51:54 555D518F r (reader) v14 [internal] providers: 4 (04,08,0C,10)
2017/11/04 16:51:54 555D518F r (reader) v14 [internal] found card system cryptoworks
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: FFE0, date: 2017/09/12 - 2018/05/20, name: Product FFE0
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: 0002, date: 2017/10/29 - 2018/07/06, name: Product 0002
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: 0001, date: 2017/10/22 - 2018/06/29, name: Product 0001
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2017/11/04 16:51:54 555D518F r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 16:51:55 555D518F r (reader) v14 [cryptoworks] ready for requests
2017/11/04 16:51:55 0E4913FD c (dvbapi) Demuxer 0 restarting decodingrequests after 14589 ms with 2 enabled and 4 disabled ecmpids!
2017/11/04 16:51:55 0E4913FD c (dvbapi) Demuxer 0 trying to descramble PID 2 CAID 0D95 PROVID 000000 ECMPID 00FB ANY CHID PMTPID 03E9 VPID 00A0
2017/11/04 16:51:55 0E4913FD c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0D98 PROVID 000000 ECMPID 00FD ANY CHID PMTPID 03E9 VPID 00A0
2017/11/04 16:51:56 0E4913FD c (ecm) local (0D95@000004/0000/32C9/B8:2891A0D0875CB8349AD4395221D2E4AE): rejected group (1 ms) (no matching reader)
2017/11/04 16:51:56 0E4913FD c (ecm) local (0D98@000004/0000/32C9/80DEE81930C2B551D5AAD360F4F306DD1): found (111 ms) by v14
2017/11/04 16:51:57 0E4913FD c (ecm) local (0D98@000004/0000/32C9/804335EC95F4FC68006E9477324EC0A6A): found (106 ms) by v14
2017/11/04 16:52:05 0E4913FD c (dvbapi) Demuxer 0 stop descrambling program number 32C9 (0D98@000004:32C9 unknown)
2017/11/04 16:52:06 0E4913FD c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
2017/11/04 16:52:06 0E4913FD c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
2017/11/04 16:52:06 0E4913FD c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
2017/11/04 16:52:06 0E4913FD c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 02ED PROVID: 060200
2017/11/04 16:52:06 0E4913FD c (dvbapi) Demuxer 0 found 4 ECMpids and 8 STREAMpids in caPMT
2017/11/04 16:52:06 0E4913FD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0500 PROVID 023800 ECMPID 02CF ANY CHID PMTPID 01F5 VPID 01F6
2017/11/04 16:52:08 0E4913FD c (ecm) local (0500@023800/08E2/4331/2A:2995709DC0EC75AD88D29881EC104299): found (4 ms) by emulator
2017/11/04 16:52:12 0E4913FD c (dvbapi) Demuxer 0 stop descrambling program number 4331 (0500@023800:4331 unknown)
2017/11/04 17:10:11 3112CCC9 h (webif) Refresh Clients requested by WebIF from 10.0.0.8
2017/11/04 17:23:58 0E4913FD c (-) -- Skipped 1 duplicated log lines --
2017/11/04 17:23:58 0E4913FD c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0500 ECM_PID: 02CF PROVID: 023800
2017/11/04 17:23:58 0E4913FD c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0500 ECM_PID: 02D9 PROVID: 040810
2017/11/04 17:23:58 0E4913FD c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0500 ECM_PID: 02E3 PROVID: 050800
2017/11/04 17:23:58 0E4913FD c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0500 ECM_PID: 02ED PROVID: 060200
2017/11/04 17:23:58 0E4913FD c (dvbapi) Demuxer 0 found 4 ECMpids and 8 STREAMpids in caPMT
2017/11/04 17:23:58 0E4913FD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0500 PROVID 023800 ECMPID 02CF ANY CHID PMTPID 01F5 VPID 01F6
2017/11/04 17:23:58 0E4913FD c (ecm) local (0500@023800/08E2/4331/2A:C51A8F2814F36C92329CC5837E7CED3E): found (1 ms) by emulator
2017/11/04 17:24:04 0E4913FD c (ecm) local (0500@023800/08E2/4331/2A:0C96755795E4EB0F4EEE0D60113135E6): found (4 ms) by emulator
2017/11/04 17:24:14 0E4913FD c (ecm) local (0500@023800/08E2/4331/2A:9CF0A2CC42545214BE77241ADAD41D75): found (2 ms) by emulator
2017/11/04 17:24:24 0E4913FD c (ecm) local (0500@023800/08E2/4331/2A:7CCC57601D3DBACF2BE8AF2EF7FB0F55): found (2 ms) by

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10991
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = local
au = 1
group = 1,2

[account]
user = dm7000
pwd = dm7000
description = dm7000
group = 1,2

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11385
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = v14
description = v14
protocol = internal
device = /dev/sci1
boxid = 12345678
ins7e11 = 15
detect = cd
nagra_read = 2
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1
ndsversion = 2

[reader]
label = emulator
description = cccam
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 2
emmcache = 1,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

dodo83 · 4. November 2017

laufen die Schweizer über EMU, bzw KEYS?
von einer ORF Karte sieht man auch nichts .... das kann nicht über OSCam laufen in dem zustand was du gepostet hast

EDIT
ok, die ORF läuft über den v14 Reader laut log

karl3124 · 4. November 2017

2017/11/04 17:54:14 00000000 s (main) System name = Linux
2017/11/04 17:54:14 00000000 s (main) Host name = dm8000
2017/11/04 17:54:14 00000000 s (main) Release = 3.2-dm8000
2017/11/04 17:54:14 00000000 s (main) Version = #1 SMP Mon Mar 16 20:58:18 UTC 2015
2017/11/04 17:54:14 00000000 s (main) Machine = mips
2017/11/04 17:54:14 00000000 s (main) Stb model = dm8000
2017/11/04 17:54:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 22009
2017/11/04 17:54:14 00000000 s (emu) OSCam-Emu version 741
2017/11/04 17:54:14 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/11/04 17:54:14 00000000 s (main) signal handling initialized
2017/11/04 17:54:14 00000000 s (config) 299 service-id's loaded in 7 ms
2017/11/04 17:54:14 00000000 s (config) 43 tier-id's loaded
2017/11/04 17:54:14 00000000 s (net) cs357x: initialized (fd=8, port=4567)
2017/11/04 17:54:14 00000000 s (net) cccam: initialized (fd=9, port=21029, ip=10.0.0.20)
2017/11/04 17:54:14 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2017/11/04 17:54:14 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2017/11/04 17:54:14 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2017/11/04 17:54:14 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2017/11/04 17:54:14 00000000 s (reader) v14 [internal] creating thread for device /dev/sci1
2017/11/04 17:54:14 00000000 s (reader) emulator [emu] creating thread for device emulator
2017/11/04 17:54:14 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/11/04 17:54:14 00000000 s (main) waiting for local card init
2017/11/04 17:54:14 4A20C476 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/11/04 17:54:14 4A20C476 r (reader) v14 [internal] Reader sci internal, detected box type: dm8000
2017/11/04 17:54:14 2DD869F8 r (emu) Key file not found in: /var/tuxbox/config
2017/11/04 17:54:14 2DD869F8 r (emu) Reading key file: /var/keys/SoftCam.Key
2017/11/04 17:54:14 00000000 (emu) INFO: FFDecsa parallel mode = 64
2017/11/04 17:54:14 2DD869F8 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/11/04 17:54:14 6E043D36 h (webif) webif: decompressed 178435 bytes back into 440328 bytes
2017/11/04 17:54:14 6E043D36 h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2017/11/04 17:54:15 2DD869F8 r (reader) emulator [emu] card detected
2017/11/04 17:54:15 4A20C476 r (reader) v14 [internal] card detected
2017/11/04 17:54:16 2DD869F8 r (reader) emulator [emu] found card system emu
2017/11/04 17:54:16 2DD869F8 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/04 17:54:16 2DD869F8 r (emu) Key file not found in: /var/tuxbox/config
2017/11/04 17:54:16 2DD869F8 r (emu) Reading key file: /var/keys/SoftCam.Key
2017/11/04 17:54:16 4A20C476 r (reader) v14 [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/04 17:54:17 4A20C476 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75212
2017/11/04 17:54:17 4A20C476 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/04 17:54:17 4A20C476 r (reader) v14 [internal] Calculated work ETU is 41.33 us reader mhz = 450
2017/11/04 17:54:17 4A20C476 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75210
2017/11/04 17:54:17 4A20C476 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2017/11/04 17:54:18 4A20C476 r (reader) v14 [internal] card detected
2017/11/04 17:54:18 4A20C476 r (reader) v14 [internal] type: CryptoWorks
2017/11/04 17:54:18 4A20C476 r (reader) v14 [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
2017/11/04 17:54:18 4A20C476 r (reader) v14 [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2017/11/04 17:54:18 4A20C476 r (reader) v14 [internal] providers: 4 (04,08,0C,10)
2017/11/04 17:54:18 4A20C476 r (reader) v14 [internal] found card system cryptoworks
2017/11/04 17:54:18 4A20C476 r (reader) v14 [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/04 17:54:18 4A20C476 r (reader) v14 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: FFE0, date: 2017/09/12 - 2018/05/20, name: Product FFE0
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: 0002, date: 2017/10/29 - 2018/07/06, name: Product 0002
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: 0001, date: 2017/10/22 - 2018/06/29, name: Product 0001
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 17:54:19 4A20C476 r (reader) v14 [cryptoworks] ready for requests
2017/11/04 17:54:20 00000000 s (main) init for all local cards done
2017/11/04 17:54:20 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2017/11/04 17:54:20 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2017/11/04 17:54:20 40CFBA4D c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2017/11/04 17:54:20 40CFBA4D c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0065 PROVID: 000000
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 0067 PROVID: 000000
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 00FB PROVID: 000000
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 00FD PROVID: 000000
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 01E1 PROVID: 000000
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098C ECM_PID: 01EB PROVID: 000000
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in caPMT
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 3
2017/11/04 17:54:20 40CFBA4D c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0D98 PROVID 000000 ECMPID 00FD ANY CHID PMTPID 03E9 VPID 00A0
2017/11/04 17:54:20 40CFBA4D c (ecm) local (0D98@000004/0000/32C9/80:CCBCD3B73376A0391BA2D00AC948915E): found (114 ms) by v14
2017/11/04 17:54:28 40CFBA4D c (ecm) local (0D98@000004/0000/32C9/80:8212007FFBA4E68886A74C29489CE35C): found (99 ms) by v14
2017/11/04 17:54:38 40CFBA4D c (ecm) local (0D98@000004/0000/32C9/804C78DAF10B5ADBC17E296036186B776): found (98 ms) by v14

ja orf mit karte und die schweizer mit oscam und keys laufen auch

diesen log hab ich bekommen nach restart oscam

hatte früher mal eine sky karte deshalb v 14 aber die hab ich nicht mehr

dodo83 · 4. November 2017

ändere mal so ab

[reader]
label = ORF
description = orf
protocol = internal
device = /dev/sci1
detect = cd
nagra_read = 2
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
caid = 0D98

[reader]
label = emulator
description = cccam
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 2
emmcache = 1,1,2,1
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

und

[account]
user = local
au = 1
group = 1,2

[account]
user = dm7000
pwd = dm7000
description = dm7000
group = 1,2

[account]
user = dm7020
pwd = dm7020
description = dm7020
group = 1,2

für die 7000er ist schon ein Account eigerichtet, für die 7020 wie oben, halt das gleiche

dann die C-line auf dem jeweiligem Client

C: ServerIP PORT dm7020 dm7020

ultima · 4. November 2017

Welche ORF Karte hast du?

karl3124 · 4. November 2017

irdeto neu

dodo hab alles umgeändert danach ging der orf auf der dm8000 nicht mehr hab alles wieder zurückgesetzt.

kann sich einer mit mir über teamvewer verbinden und sich das mal ansehen.

kann mir keiner weiterhelfen ?

Pilot · 4. November 2017

Du hast die die configs so geändert wie dodo83 im Beitrag geschrieben hast geändert?
Danach oscam neu gestartet?
Aber keinen log vom Ergebnis geliefert...
Ändere noch mal und liefere den Log.

ultima · 4. November 2017

[reader]
label = ORF_ICE_C8_CW-Mode_unten
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
group = 1
autospeed = 1
cardmhz = 2700
emmcache = 1,1,2
[reader]
label = ORF_ICE_C8_CW-Mode_oben
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
group = 2
autospeed = 1
cardmhz = 2700
emmcache = 1,1,2
[reader]
label = ORF_ICE_C8_Irdeto-Mode_unten
enable = 0
protocol = internal
device = /dev/sci0
caid = 0648
boxkey = 48454C4C4F4F5246
rsakey = 70FEA1692180154CD1C9777B2D7844927EE9B85D5EAF9FF0170B575E7BFE5D355FCBABFC6FE8667C281B853A03D12750270BB287C5756D9281F2CEF1D09AC219
force_irdeto = 1
detect = cd
autospeed = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2
[reader]
label = ORF_ICE_C8_Irdeto-Mode_oben
enable = 0
protocol = internal
device = /dev/sci1
caid = 0648
boxkey = 48454C4C4F4F5246
rsakey = 70FEA1692180154CD1C9777B2D7844927EE9B85D5EAF9FF0170B575E7BFE5D355FCBABFC6FE8667C281B853A03D12750270BB287C5756D9281F2CEF1D09AC219
force_irdeto = 1
detect = cd
autospeed = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2
[reader]
label = ORF_ICE_P4_CW-Mode_unten
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D98
detect = cd
group = 1
autospeed = 1
cardmhz = 2700
emmcache = 1,1,2
[reader]
label = ORF_ICE_P4_CW-Mode_oben
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D98
detect = cd
group = 2
autospeed = 1
cardmhz = 2700
emmcache = 1,1,2

# Richtigen Reader je nach Karte auswählen und dort enable = 1 eintragen

karl3124 · 4. November 2017

so die dm 8000 läuft mit den einstellungen von dodo jetzt warum auch immer jetzt muss ich nur noch das ganze aufmeine anderen dreamboxen bringen

2017/11/04 18:58:22 00000000 s (main) System name = Linux
2017/11/04 18:58:22 00000000 s (main) Host name = dm8000
2017/11/04 18:58:22 00000000 s (main) Release = 3.2-dm8000
2017/11/04 18:58:22 00000000 s (main) Version = #1 SMP Mon Mar 16 20:58:18 UTC 2015
2017/11/04 18:58:22 00000000 s (main) Machine = mips
2017/11/04 18:58:22 00000000 s (main) Stb model = dm8000
2017/11/04 18:58:22 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 4043
2017/11/04 18:58:22 00000000 s (emu) OSCam-Emu version 741
2017/11/04 18:58:22 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2017/11/04 18:58:22 00000000 s (main) signal handling initialized
2017/11/04 18:58:22 00000000 s (config) 299 service-id's loaded in 8 ms
2017/11/04 18:58:22 00000000 s (config) 43 tier-id's loaded
2017/11/04 18:58:22 00000000 s (net) cs357x: initialized (fd=8, port=4567)
2017/11/04 18:58:22 00000000 s (net) cccam: initialized (fd=9, port=21029, ip=10.0.0.20)
2017/11/04 18:58:22 00000000 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2017/11/04 18:58:22 00000000 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2017/11/04 18:58:22 00000000 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2017/11/04 18:58:22 00000000 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2017/11/04 18:58:22 00000000 s (reader) ORF [internal] creating thread for device /dev/sci1
2017/11/04 18:58:22 00000000 s (reader) emulator [emu] creating thread for device emulator
2017/11/04 18:58:22 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/11/04 18:58:22 00000000 s (main) waiting for local card init
2017/11/04 18:58:22 5B242E6D r (reader) ORF [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2017/11/04 18:58:22 5B242E6D r (reader) ORF [internal] Reader sci internal, detected box type: dm8000
2017/11/04 18:58:22 023B2ABD r (emu) Key file not found in: /var/tuxbox/config
2017/11/04 18:58:22 023B2ABD r (emu) Reading key file: /var/keys/SoftCam.Key
2017/11/04 18:58:22 023B2ABD r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/11/04 18:58:22 00000000 (emu) INFO: FFDecsa parallel mode = 64
2017/11/04 18:58:22 47A3CCAB h (webif) webif: decompressed 178435 bytes back into 440328 bytes
2017/11/04 18:58:22 47A3CCAB h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2017/11/04 18:58:23 5B242E6D r (reader) ORF [internal] card detected
2017/11/04 18:58:23 023B2ABD r (reader) emulator [emu] card detected
2017/11/04 18:58:24 023B2ABD r (reader) emulator [emu] found card system emu
2017/11/04 18:58:24 023B2ABD r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/04 18:58:24 023B2ABD r (emu) Key file not found in: /var/tuxbox/config
2017/11/04 18:58:24 023B2ABD r (emu) Reading key file: /var/keys/SoftCam.Key
2017/11/04 18:58:24 5B242E6D r (reader) ORF [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2017/11/04 18:58:24 5B242E6D r (reader) ORF [internal] Buffers readed 0 bytes total time_us 75197
2017/11/04 18:58:24 5B242E6D r (reader) ORF [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2017/11/04 18:58:24 5B242E6D r (reader) ORF [internal] Calculated work ETU is 41.33 us reader mhz = 450
2017/11/04 18:58:24 5B242E6D r (reader) ORF [internal] Buffers readed 0 bytes total time_us 75193
2017/11/04 18:58:25 5B242E6D r (reader) ORF [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2017/11/04 18:58:26 5B242E6D r (reader) ORF [internal] card detected
2017/11/04 18:58:26 5B242E6D r (reader) ORF [internal] type: CryptoWorks
2017/11/04 18:58:26 5B242E6D r (reader) ORF [internal] type: CryptoWorks, caid: 0D98, ascii serial: #########, hex serial: ##########
2017/11/04 18:58:26 5B242E6D r (reader) ORF [internal] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
2017/11/04 18:58:26 5B242E6D r (reader) ORF [internal] providers: 4 (04,08,0C,10)
2017/11/04 18:58:26 5B242E6D r (reader) ORF [internal] found card system cryptoworks
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] chid: FFE0, date: 2017/09/12 - 2018/05/20, name: Product FFE0
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] chid: 0002, date: 2017/10/29 - 2018/07/06, name: Product 0002
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] chid: 0001, date: 2017/10/22 - 2018/06/29, name: Product 0001
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 18:58:26 5B242E6D r (reader) ORF [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
2017/11/04 18:58:27 5B242E6D r (reader) ORF [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 18:58:27 5B242E6D r (reader) ORF [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
2017/11/04 18:58:27 5B242E6D r (reader) ORF [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 18:58:27 5B242E6D r (reader) ORF [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
2017/11/04 18:58:27 5B242E6D r (reader) ORF [cryptoworks] chid: 0000, date: 1999/12/31 - 2000/01/07, name: DownLoad00000000
2017/11/04 18:58:27 5B242E6D r (reader) ORF [cryptoworks] ready for requests
2017/11/04 18:58:27 00000000 s (main) init for all local cards done
2017/11/04 18:58:27 00000000 s (emmcache) loaded 101 emmcache records from /tmp/.oscam/oscam.emmcache in 6 ms
2017/11/04 18:58:27 00000000 s (emmcache) loaded 101 emmstat records from /tmp/.oscam/oscam.emmstat in 4 ms
2017/11/04 18:58:27 13E575FB c (client) plain dvbapi-client granted (local, au=auto (2 reader))
2017/11/04 18:58:28 13E575FB c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2017/11/04 18:58:28 13E575FB c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 ecmpid 0 CAID: 0648 ECM_PID: 0065 PROVID: 000000
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 ecmpid 1 CAID: 0650 ECM_PID: 0067 PROVID: 000000
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 ecmpid 2 CAID: 0D95 ECM_PID: 00FB PROVID: 000000
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 ecmpid 3 CAID: 0D98 ECM_PID: 00FD PROVID: 000000
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 01E1 PROVID: 000000
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098C ECM_PID: 01EB PROVID: 000000
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in caPMT
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 3
2017/11/04 18:58:28 13E575FB c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 0D98 PROVID 000000 ECMPID 00FD ANY CHID PMTPID 03E9 VPID 00A0
2017/11/04 18:58:28 13E575FB c (ecm) local (0D98@000004/0000/32C9/80:07FFE2769806C81A285759C84E4E99EB): found (112 ms) by ORF
2017/11/04 18:58:28 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (41 ms)
2017/11/04 18:58:29 13E575FB c (ecm) local (0D98@000004/0000/32C9/80E6E9E308353C4588E17B718B2FF906C): found (99 ms) by ORF
2017/11/04 18:58:30 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (43 ms)
2017/11/04 18:58:30 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (42 ms)
2017/11/04 18:58:30 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (44 ms)
2017/11/04 18:58:30 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (43 ms)
2017/11/04 18:58:38 5B242E6D r (-) -- Skipped 3 duplicated log lines --
2017/11/04 18:58:38 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (45 ms)
2017/11/04 18:58:38 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (43 ms)
2017/11/04 18:58:38 5B242E6D r (reader) ORF [cryptoworks] local emmtype=global, len=55 (hex: 0x37), cnt=1: written (42 ms)

ultima · 4. November 2017

Die C-Lines erstellen und in die Client Boxen eintragen

karl3124 · 4. November 2017

C: 10.0.0.20 PORT

Sie müssen registriert sein, um Links zu sehen.

reicht das alleine

ultima · 4. November 2017

Eine C-Line sollte in deinem Fall so aussehen.
C: IP der Box Port User Pass

Poste mal deine oscam. config und oscam. user

karl3124 · 4. November 2017

C:10.0.0.20 4567 dm7000 dm7000 yes

aber so gehts nicht leider

ultima · 4. November 2017

oscam config da sollte der drin stehen

Suche

Suche

frage wegen cs

axel

karl3124

Hacker

dodo83

karl3124

Hacker

dodo83

ultima

DEB Inventar

karl3124

Hacker

Pilot

ultima

DEB Inventar

karl3124

Hacker

ultima

DEB Inventar

karl3124

Hacker

ultima

DEB Inventar

karl3124

Hacker

ultima

DEB Inventar

Ähnliche Themen

Spenden Unterstützung