Hallo !
Ich habe seit ca. zwei Tagen folgendes Problem bei der Karteninitialisierung:
Beim ersten Starten des PC bekomme ich folgende Meldung im Webinterface "ERROR: No entitlements" und in der Oscam Log:
Sobald ich Oscam beende, die Smartcard aus dem Reader nehme, Oscam ohne Karte starte und dann die Smartcard wieder einstecke, funktioniert alles wieder ohne Probleme. Woran kann das liegen, das beim ersten Start des PC die Karte nicht initialisiert wird ? Jemand schon ein ähnliches Problem gehabt ?
Ich benutze die OSCAM 1.20-unstable_svn build r8334 und einen Smargo.
greetz speww
Ich habe seit ca. zwei Tagen folgendes Problem bei der Karteninitialisierung:
Beim ersten Starten des PC bekomme ich folgende Meldung im Webinterface "ERROR: No entitlements" und in der Oscam Log:
2013/02/12 14:21:18 0 s -> CAID: 09C7 PROVID: 000000
2013/02/12 14:21:18 0 s pandora: disabled
2013/02/12 14:21:18 0 s csp: disabled
2013/02/12 14:21:18 0 s radegast: disabled
2013/02/12 14:21:18 0 s KDGKARTE [mouse] creating thread for device /dev/ttyUSB0
2013/02/12 14:21:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/02/12 14:21:18 0 s waiting for local card init
2013/02/12 14:21:18 A40008C0 h dvbapi: HTTP Server listening on port 8888
2013/02/12 14:21:18 1C35010 r KDGKARTE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013/02/12 14:21:19 1C35010 r KDGKARTE [mouse] card detected
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] ATR: 3F .......... FF
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] Setting baudrate to 9600 bps
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] Calculated work ETU is 104.20 us
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/02/12 14:21:22 1C35010 r KDGKARTE [mouse] card system not supported
2013/02/12 14:21:22 1C35010 r KDGKARTE [mouse] Normal mode failed, reverting to Deprecated Mode
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] ATR: 3F ................ FF
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] Calculated work ETU is 104.20 us
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/02/12 14:21:25 1C35010 r KDGKARTE [mouse] card system not supported
2013/02/12 14:21:25 1C35010 r KDGKARTE [mouse] card initializing error
2013/02/12 14:21:26 0 s init for all local cards done
2013/02/12 14:21:26 0 s anti cascading disabled
2013/02/12 14:21:26 1C39C90 c client connected to 50002 port
2013/02/12 14:21:26 0 --- Skipped 1 duplicated log lines ---
2013/02/12 14:21:26 1C39C90 c anonymous disconnected from 192.168.178.27
2013/02/12 14:21:26 1C3B620 c encrypted newcamd:50002-client 192.168.178.27 granted (tvheadend, au=on (1 reader))
2013/02/12 14:21:26 1C3B620 c user tvheadend authenticated successfully (Tvheadend)
2013/02/12 14:21:26 1C3B620 c AU disabled for user tvheadend
2013/02/12 14:21:18 0 s pandora: disabled
2013/02/12 14:21:18 0 s csp: disabled
2013/02/12 14:21:18 0 s radegast: disabled
2013/02/12 14:21:18 0 s KDGKARTE [mouse] creating thread for device /dev/ttyUSB0
2013/02/12 14:21:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/02/12 14:21:18 0 s waiting for local card init
2013/02/12 14:21:18 A40008C0 h dvbapi: HTTP Server listening on port 8888
2013/02/12 14:21:18 1C35010 r KDGKARTE [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013/02/12 14:21:19 1C35010 r KDGKARTE [mouse] card detected
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] ATR: 3F .......... FF
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] Setting baudrate to 9600 bps
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] Calculated work ETU is 104.20 us
2013/02/12 14:21:21 1C35010 r KDGKARTE [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/02/12 14:21:22 1C35010 r KDGKARTE [mouse] card system not supported
2013/02/12 14:21:22 1C35010 r KDGKARTE [mouse] Normal mode failed, reverting to Deprecated Mode
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] ATR: 3F ................ FF
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] Init card protocol T0, FI=1, F=372, D=1, N=2
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] Calculated work ETU is 104.20 us
2013/02/12 14:21:24 1C35010 r KDGKARTE [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/02/12 14:21:25 1C35010 r KDGKARTE [mouse] card system not supported
2013/02/12 14:21:25 1C35010 r KDGKARTE [mouse] card initializing error
2013/02/12 14:21:26 0 s init for all local cards done
2013/02/12 14:21:26 0 s anti cascading disabled
2013/02/12 14:21:26 1C39C90 c client connected to 50002 port
2013/02/12 14:21:26 0 --- Skipped 1 duplicated log lines ---
2013/02/12 14:21:26 1C39C90 c anonymous disconnected from 192.168.178.27
2013/02/12 14:21:26 1C3B620 c encrypted newcamd:50002-client 192.168.178.27 granted (tvheadend, au=on (1 reader))
2013/02/12 14:21:26 1C3B620 c user tvheadend authenticated successfully (Tvheadend)
2013/02/12 14:21:26 1C3B620 c AU disabled for user tvheadend
Sobald ich Oscam beende, die Smartcard aus dem Reader nehme, Oscam ohne Karte starte und dann die Smartcard wieder einstecke, funktioniert alles wieder ohne Probleme. Woran kann das liegen, das beim ersten Start des PC die Karte nicht initialisiert wird ? Jemand schon ein ähnliches Problem gehabt ?
Ich benutze die OSCAM 1.20-unstable_svn build r8334 und einen Smargo.
greetz speww