Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

FAQ: Reader ein festen Port zuweisen.

AW: FAQ: Reader ein festen Port zuweisen.

Hi,

es ist immer nur eine quadmouse angeschlossen.

dmesg|grep usb

gibt folgendes aus

root@debian ~ > dmesg|grep usb
[ 2.273301] usbcore: registered new interface driver usbfs
[ 2.273390] usbcore: registered new interface driver hub
[ 2.292236] usbcore: registered new device driver usb
[ 2.320241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.320253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.320263] usb usb1: Product: EHCI Host Controller
[ 2.320272] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.320282] usb usb1: SerialNumber: 0000:00:10.4
[ 2.323005] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.323016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.323027] usb usb2: Product: UHCI Host Controller
[ 2.323036] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.323045] usb usb2: SerialNumber: 0000:00:10.0
[ 2.360422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.360434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.360445] usb usb3: Product: UHCI Host Controller
[ 2.360453] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.360463] usb usb3: SerialNumber: 0000:00:10.1
[ 2.365310] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.365322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.365332] usb usb4: Product: UHCI Host Controller
[ 2.365341] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.365351] usb usb4: SerialNumber: 0000:00:10.2
[ 2.371464] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.371475] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.371486] usb usb5: Product: UHCI Host Controller
[ 2.371495] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.371504] usb usb5: SerialNumber: 0000:00:10.3
[ 2.632346] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 2.764846] usb 1-2: New USB device found, idVendor=0403, idProduct=6011
[ 2.764860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.764871] usb 1-2: Product: Quad RS232-HS
[ 2.764879] usb 1-2: Manufacturer: FTDI
[ 5.315180] usbcore: registered new interface driver usbserial
[ 5.315362] usbcore: registered new interface driver usbserial_generic
[ 5.315371] usbserial: USB Serial Driver core
[ 5.397514] usb 1-2: Detected FT4232H
[ 5.397522] usb 1-2: Number of endpoints 2
[ 5.397532] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.397541] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.397550] usb 1-2: Setting MaxPacketSize 512
[ 5.410296] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5.410454] usb 1-2: Detected FT4232H
[ 5.410621] usb 1-2: Number of endpoints 2
[ 5.410630] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.410640] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.410649] usb 1-2: Setting MaxPacketSize 512
[ 5.420384] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 5.420558] usb 1-2: Detected FT4232H
[ 5.420567] usb 1-2: Number of endpoints 2
[ 5.420576] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.420585] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.420594] usb 1-2: Setting MaxPacketSize 512
[ 5.431513] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB2
[ 5.431669] usb 1-2: Detected FT4232H
[ 5.431677] usb 1-2: Number of endpoints 2
[ 5.431687] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.431696] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.431705] usb 1-2: Setting MaxPacketSize 512
[ 5.436007] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB3
[ 5.436175] usbcore: registered new interface driver ftdi_sio
root@debian ~ >

Wie soll dann der Eintrag in der 91-usb.rules für den 1. Reader USB0 aussehen?


Im IPC werden die 4 Reader auch erkannt.
2013/11/08 14:09:02 A07A038 r hd1 [mouse] Reader initialized (device=/dev/ttyUSB2, detect=cd, mhz=369, cardmhz=369)
2013/11/08 14:09:02 A0733E8 r sky2 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=960, cardmhz=600)
2013/11/08 14:09:02 A07BD28 r hd2 [mouse] Reader initialized (device=/dev/ttyUSB3, detect=cd, mhz=369, cardmhz=369)
2013/11/08 14:09:02 A071668 r sky1 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=960, cardmhz=600)

Danke für die Hilfe
 
AW: FAQ: Reader ein festen Port zuweisen.

Hi,

Deine Lösung sieht aber anders aus, als bei pebkac.at/wiki

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ID=="1-4:1.0", ATTRS{bInterfaceNumber}=="00", SYMLINK+="quad-1-1"

Wenn ich jetzt noch die 2. Quadmouse anschließe, wie unterscheiden sich beide Mäuse? "Quad RS232-HS" haben ja beide?

ich habe jetzt mal mit dmesg|grep usb das 1. mit 1 Quadmouse und das 2. mit beiden Quadmäusen

root@debian ~ > dmesg|grep usb
[ 2.273301] usbcore: registered new interface driver usbfs
[ 2.273390] usbcore: registered new interface driver hub
[ 2.292236] usbcore: registered new device driver usb
[ 2.320241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.320253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.320263] usb usb1: Product: EHCI Host Controller
[ 2.320272] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 2.320282] usb usb1: SerialNumber: 0000:00:10.4
[ 2.323005] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.323016] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.323027] usb usb2: Product: UHCI Host Controller
[ 2.323036] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.323045] usb usb2: SerialNumber: 0000:00:10.0
[ 2.360422] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.360434] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.360445] usb usb3: Product: UHCI Host Controller
[ 2.360453] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.360463] usb usb3: SerialNumber: 0000:00:10.1
[ 2.365310] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.365322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.365332] usb usb4: Product: UHCI Host Controller
[ 2.365341] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.365351] usb usb4: SerialNumber: 0000:00:10.2
[ 2.371464] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.371475] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 2.371486] usb usb5: Product: UHCI Host Controller
[ 2.371495] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 2.371504] usb usb5: SerialNumber: 0000:00:10.3
[ 2.632346] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[ 2.764846] usb 1-2: New USB device found, idVendor=0403, idProduct=6011
[ 2.764860] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.764871] usb 1-2: Product: Quad RS232-HS
[ 2.764879] usb 1-2: Manufacturer: FTDI
[ 5.315180] usbcore: registered new interface driver usbserial
[ 5.315362] usbcore: registered new interface driver usbserial_generic
[ 5.315371] usbserial: USB Serial Driver core
[ 5.397514] usb 1-2: Detected FT4232H
[ 5.397522] usb 1-2: Number of endpoints 2
[ 5.397532] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.397541] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.397550] usb 1-2: Setting MaxPacketSize 512
[ 5.410296] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5.410454] usb 1-2: Detected FT4232H
[ 5.410621] usb 1-2: Number of endpoints 2
[ 5.410630] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.410640] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.410649] usb 1-2: Setting MaxPacketSize 512
[ 5.420384] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 5.420558] usb 1-2: Detected FT4232H
[ 5.420567] usb 1-2: Number of endpoints 2
[ 5.420576] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.420585] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.420594] usb 1-2: Setting MaxPacketSize 512
[ 5.431513] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB2
[ 5.431669] usb 1-2: Detected FT4232H
[ 5.431677] usb 1-2: Number of endpoints 2
[ 5.431687] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 5.431696] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 5.431705] usb 1-2: Setting MaxPacketSize 512
[ 5.436007] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB3
[ 5.436175] usbcore: registered new interface driver ftdi_sio
root@debian ~ >
root@debian ~ > [ 2.323005] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
-bash: [: Fehlende `]'

root@debian ~ > dmesg|grep usb
[ 6391.567819] usb 1-1: Number of endpoints 2
[ 6391.567828] usb 1-1: Endpoint 1 MaxPacketSize 512
[ 6391.567838] usb 1-1: Endpoint 2 MaxPacketSize 512
[ 6391.567847] usb 1-1: Setting MaxPacketSize 512
[ 6391.568842] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB7
[ 6391.615508] usb 1-2: USB disconnect, device number 4
[ 6391.856062] usb 1-2: new high-speed USB device number 6 using ehci_hcd
[ 6391.988847] usb 1-2: New USB device found, idVendor=0403, idProduct=6011
[ 6391.988861] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6391.988872] usb 1-2: Product: Quad RS232-HS
[ 6391.988880] usb 1-2: Manufacturer: FTDI
[ 6391.991819] usb 1-2: Detected FT4232H
[ 6391.991828] usb 1-2: Number of endpoints 2
[ 6391.991837] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6391.991847] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6391.991856] usb 1-2: Setting MaxPacketSize 512
[ 6391.994601] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB8
[ 6391.995280] usb 1-2: Detected FT4232H
[ 6391.995288] usb 1-2: Number of endpoints 2
[ 6391.995298] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6391.995307] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6391.995316] usb 1-2: Setting MaxPacketSize 512
[ 6391.997858] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB9
[ 6391.998543] usb 1-2: Detected FT4232H
[ 6391.998552] usb 1-2: Number of endpoints 2
[ 6391.998561] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6391.998570] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6391.998579] usb 1-2: Setting MaxPacketSize 512
[ 6392.001041] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB10
[ 6392.001721] usb 1-2: Detected FT4232H
[ 6392.001729] usb 1-2: Number of endpoints 2
[ 6392.001738] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6392.001748] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6392.001757] usb 1-2: Setting MaxPacketSize 512
[ 6392.005250] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB11
[ 6392.029560] usb 1-2: USB disconnect, device number 6
[ 6392.272079] usb 1-2: new high-speed USB device number 7 using ehci_hcd
[ 6392.404784] usb 1-2: New USB device found, idVendor=0403, idProduct=6011
[ 6392.404799] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6392.404809] usb 1-2: Product: Quad RS232-HS
[ 6392.404817] usb 1-2: Manufacturer: FTDI
[ 6392.405855] usb 1-2: Detected FT4232H
[ 6392.405864] usb 1-2: Number of endpoints 2
[ 6392.405873] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6392.405882] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6392.405891] usb 1-2: Setting MaxPacketSize 512
[ 6392.406421] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB8
[ 6392.407127] usb 1-2: Detected FT4232H
[ 6392.407135] usb 1-2: Number of endpoints 2
[ 6392.407145] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6392.407154] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6392.407163] usb 1-2: Setting MaxPacketSize 512
[ 6392.409465] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB9
[ 6392.410339] usb 1-2: Detected FT4232H
[ 6392.410348] usb 1-2: Number of endpoints 2
[ 6392.410357] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6392.410367] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6392.410376] usb 1-2: Setting MaxPacketSize 512
[ 6392.410874] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB10
[ 6392.411492] usb 1-2: Detected FT4232H
[ 6392.411501] usb 1-2: Number of endpoints 2
[ 6392.411510] usb 1-2: Endpoint 1 MaxPacketSize 512
[ 6392.411519] usb 1-2: Endpoint 2 MaxPacketSize 512
[ 6392.411528] usb 1-2: Setting MaxPacketSize 512
[ 6392.411960] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB11
[ 6742.955147] usb 1-1: USB disconnect, device number 5
[ 7580.016075] usb 1-1: new high-speed USB device number 8 using ehci_hcd
[ 7580.148813] usb 1-1: New USB device found, idVendor=0403, idProduct=6011
[ 7580.148828] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7580.148838] usb 1-1: Product: Quad RS232-HS
[ 7580.148847] usb 1-1: Manufacturer: FTDI
[ 7580.150432] usb 1-1: Detected FT4232H
[ 7580.150440] usb 1-1: Number of endpoints 2
[ 7580.150450] usb 1-1: Endpoint 1 MaxPacketSize 512
[ 7580.150459] usb 1-1: Endpoint 2 MaxPacketSize 512
[ 7580.150468] usb 1-1: Setting MaxPacketSize 512
[ 7580.151066] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7580.151800] usb 1-1: Detected FT4232H
[ 7580.151809] usb 1-1: Number of endpoints 2
[ 7580.151818] usb 1-1: Endpoint 1 MaxPacketSize 512
[ 7580.151828] usb 1-1: Endpoint 2 MaxPacketSize 512
[ 7580.151837] usb 1-1: Setting MaxPacketSize 512
[ 7580.152776] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB1
[ 7580.154448] usb 1-1: Detected FT4232H
[ 7580.154456] usb 1-1: Number of endpoints 2
[ 7580.154466] usb 1-1: Endpoint 1 MaxPacketSize 512
[ 7580.154475] usb 1-1: Endpoint 2 MaxPacketSize 512
[ 7580.154484] usb 1-1: Setting MaxPacketSize 512
[ 7580.155065] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB2
[ 7580.155787] usb 1-1: Detected FT4232H
[ 7580.155796] usb 1-1: Number of endpoints 2
[ 7580.155805] usb 1-1: Endpoint 1 MaxPacketSize 512
[ 7580.155814] usb 1-1: Endpoint 2 MaxPacketSize 512
[ 7580.155823] usb 1-1: Setting MaxPacketSize 512
[ 7580.156775] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB3
[20261.013942] usb 1-2: USB disconnect, device number 7
[20261.260087] usb 1-2: new high-speed USB device number 9 using ehci_hcd
[20261.392847] usb 1-2: New USB device found, idVendor=0403, idProduct=6011
[20261.392862] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20261.392873] usb 1-2: Product: Quad RS232-HS
[20261.392881] usb 1-2: Manufacturer: FTDI
[20261.394628] usb 1-2: Detected FT4232H
[20261.394637] usb 1-2: Number of endpoints 2
[20261.394646] usb 1-2: Endpoint 1 MaxPacketSize 512
[20261.394655] usb 1-2: Endpoint 2 MaxPacketSize 512
[20261.394664] usb 1-2: Setting MaxPacketSize 512
[20261.395436] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB4
[20261.397410] usb 1-2: Detected FT4232H
[20261.397422] usb 1-2: Number of endpoints 2
[20261.397431] usb 1-2: Endpoint 1 MaxPacketSize 512
[20261.397441] usb 1-2: Endpoint 2 MaxPacketSize 512
[20261.397450] usb 1-2: Setting MaxPacketSize 512
[20261.398038] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB5
[20261.398761] usb 1-2: Detected FT4232H
[20261.398770] usb 1-2: Number of endpoints 2
[20261.398779] usb 1-2: Endpoint 1 MaxPacketSize 512
[20261.398788] usb 1-2: Endpoint 2 MaxPacketSize 512
[20261.398797] usb 1-2: Setting MaxPacketSize 512
[20261.399388] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB6
[20261.401426] usb 1-2: Detected FT4232H
[20261.401437] usb 1-2: Number of endpoints 2
[20261.401446] usb 1-2: Endpoint 1 MaxPacketSize 512
[20261.401456] usb 1-2: Endpoint 2 MaxPacketSize 512
[20261.401464] usb 1-2: Setting MaxPacketSize 512
[20261.402150] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB7
[20263.175857] usb 1-1: USB disconnect, device number 8
[20263.428077] usb 1-1: new high-speed USB device number 10 using ehci_hcd
[20263.560833] usb 1-1: New USB device found, idVendor=0403, idProduct=6011
[20263.560847] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20263.560858] usb 1-1: Product: Quad RS232-HS
[20263.560867] usb 1-1: Manufacturer: FTDI
[20263.562446] usb 1-1: Detected FT4232H
[20263.562455] usb 1-1: Number of endpoints 2
[20263.562465] usb 1-1: Endpoint 1 MaxPacketSize 512
[20263.562474] usb 1-1: Endpoint 2 MaxPacketSize 512
[20263.562483] usb 1-1: Setting MaxPacketSize 512
[20263.562976] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB8
[20263.563508] usb 1-1: Detected FT4232H
[20263.563516] usb 1-1: Number of endpoints 2
[20263.563525] usb 1-1: Endpoint 1 MaxPacketSize 512
[20263.563535] usb 1-1: Endpoint 2 MaxPacketSize 512
[20263.563544] usb 1-1: Setting MaxPacketSize 512
[20263.565351] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB9
[20263.566171] usb 1-1: Detected FT4232H
[20263.566180] usb 1-1: Number of endpoints 2
[20263.566189] usb 1-1: Endpoint 1 MaxPacketSize 512
[20263.566199] usb 1-1: Endpoint 2 MaxPacketSize 512
[20263.566208] usb 1-1: Setting MaxPacketSize 512
[20263.566671] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB10
[20263.567298] usb 1-1: Detected FT4232H
[20263.567306] usb 1-1: Number of endpoints 2
[20263.567315] usb 1-1: Endpoint 1 MaxPacketSize 512
[20263.567325] usb 1-1: Endpoint 2 MaxPacketSize 512
[20263.567333] usb 1-1: Setting MaxPacketSize 512
[20263.567766] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB11
[20263.575504] usb 1-2: USB disconnect, device number 9
[20263.844078] usb 1-2: new high-speed USB device number 11 using ehci_hcd
[20263.976873] usb 1-2: New USB device found, idVendor=0403, idProduct=6011
[20263.976888] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20263.976899] usb 1-2: Product: Quad RS232-HS
[20263.976907] usb 1-2: Manufacturer: FTDI
[20263.978616] usb 1-2: Detected FT4232H
[20263.978624] usb 1-2: Number of endpoints 2
[20263.978634] usb 1-2: Endpoint 1 MaxPacketSize 512
[20263.978643] usb 1-2: Endpoint 2 MaxPacketSize 512
[20263.978652] usb 1-2: Setting MaxPacketSize 512
[20263.979275] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB4
[20263.979979] usb 1-2: Detected FT4232H
[20263.979988] usb 1-2: Number of endpoints 2
[20263.979997] usb 1-2: Endpoint 1 MaxPacketSize 512
[20263.980007] usb 1-2: Endpoint 2 MaxPacketSize 512
[20263.980082] usb 1-2: Setting MaxPacketSize 512
[20263.981992] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB5
[20263.982808] usb 1-2: Detected FT4232H
[20263.982816] usb 1-2: Number of endpoints 2
[20263.982825] usb 1-2: Endpoint 1 MaxPacketSize 512
[20263.982835] usb 1-2: Endpoint 2 MaxPacketSize 512
[20263.982843] usb 1-2: Setting MaxPacketSize 512
[20263.983363] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB6
[20263.984948] usb 1-2: Detected FT4232H
[20263.984960] usb 1-2: Number of endpoints 2
[20263.984969] usb 1-2: Endpoint 1 MaxPacketSize 512
[20263.984979] usb 1-2: Endpoint 2 MaxPacketSize 512
[20263.984987] usb 1-2: Setting MaxPacketSize 512
[20263.985602] usb 1-2: FTDI USB Serial Device converter now attached to ttyUSB7
[20263.992738] usb 1-1: USB disconnect, device number 10
[20280.016081] usb 1-6: new high-speed USB device number 12 using ehci_hcd
[20280.148768] usb 1-6: New USB device found, idVendor=0403, idProduct=6011
[20280.148783] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[20280.148794] usb 1-6: Product: Quad RS232-HS
[20280.148802] usb 1-6: Manufacturer: FTDI
[20280.153953] usb 1-6: Detected FT4232H
[20280.153965] usb 1-6: Number of endpoints 2
[20280.153975] usb 1-6: Endpoint 1 MaxPacketSize 512
[20280.153985] usb 1-6: Endpoint 2 MaxPacketSize 512
[20280.153994] usb 1-6: Setting MaxPacketSize 512
[20280.154439] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB8
[20280.155100] usb 1-6: Detected FT4232H
[20280.155108] usb 1-6: Number of endpoints 2
[20280.155117] usb 1-6: Endpoint 1 MaxPacketSize 512
[20280.155126] usb 1-6: Endpoint 2 MaxPacketSize 512
[20280.155135] usb 1-6: Setting MaxPacketSize 512
[20280.158115] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB9
[20280.158786] usb 1-6: Detected FT4232H
[20280.158794] usb 1-6: Number of endpoints 2
[20280.158803] usb 1-6: Endpoint 1 MaxPacketSize 512
[20280.158813] usb 1-6: Endpoint 2 MaxPacketSize 512
[20280.158822] usb 1-6: Setting MaxPacketSize 512
[20280.161111] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB10
[20280.161854] usb 1-6: Detected FT4232H
[20280.161863] usb 1-6: Number of endpoints 2
[20280.161872] usb 1-6: Endpoint 1 MaxPacketSize 512
[20280.161881] usb 1-6: Endpoint 2 MaxPacketSize 512
[20280.161890] usb 1-6: Setting MaxPacketSize 512
[20280.164994] usb 1-6: FTDI USB Serial Device converter now attached to ttyUSB11
root@debian ~ >


Danke für die Hilfe
 
Zuletzt bearbeitet:
AW: FAQ: Reader ein festen Port zuweisen.

Was ich gepostet hab ist für 1x Quadmouse.
Was du gepostet hast ist für 2x Quadmouse.
Wie man 2 Quadmouses unterscheidet steht im besagten Wiki direkt drunter.
Da die Quadmouse keine iSerial hat, muss für udev die "usb id" genommen werden.. Das findet man über den Befehl dmesg|grep usb herraus
Zum Vergrößern anklicken....
 
AW: FAQ: Reader ein festen Port zuweisen.

Hi,

mein Problem ist, daß bei dmesg|grep usb bei mir und Wiki komplett unterschiedlich sind!
Ich kann mir auf den ganzen Scheiß keinen Reim machen und werde die Quadmäuse wieder
zurück geben.

Danke für die Hilfe
 
Zuletzt bearbeitet:
AW: FAQ: Reader ein festen Port zuweisen.

Hab leider keine Quadmouse. Merh Hilfestellung kann ich dir dazu leider nicht geben
 
AW: FAQ: Reader ein festen Port zuweisen.

ich habe heute mal debian frisch mit ein usb stick und unetbooting auf mein server instaliert. Jetzt habe ich nach der debian instalation. folgendes gemacht :

apt-get install openssh-server und danach ipc instaliert.

Jetzt wird aber meine quadmouse nicht mehr erkannt wen ich sie so anlege in der udev regeln

10-usbadapter.rules

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ID=="2-1:1.0", ATTRS{bInterfaceNumber}=="00", SYMLINK+="sky1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ID=="2-1:1.1", ATTRS{bInterfaceNumber}=="01", SYMLINK+="sky2"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ID=="2-1:1.2", ATTRS{bInterfaceNumber}=="02", SYMLINK+="sky3"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ID=="2-1:1.3", ATTRS{bInterfaceNumber}=="03", SYMLINK+="sky4"

sie werden nur noch so erkannt ttyUSB0 aber nicht mehr mit fest verlinken reader?
 
AW: FAQ: Reader ein festen Port zuweisen.

Hi,

anstatt "2-1:1.0" usw. solltest Du 4 x "Quad RS232-HS" nehmen.
So meldet sich die Quadmouse im System an.

Sieht dann so aus SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{interface}=="Quad RS232-HS", ATTRS{bInterfaceNumber}=="00", SYMLINK+="sky1"

Grüße
 
AW: FAQ: Reader ein festen Port zuweisen.

ich habe aber debian drauf kein ubuntu
 
AW: FAQ: Reader ein festen Port zuweisen.

Hi,

ich auch. Igel mit IPC & einer Quadmouse fest verlinkt.

Grüße
 
AW: FAQ: Reader ein festen Port zuweisen.

Habe es gelöst bekommen.

Wer das debian wehzy drauf hat das neue 7.2 lauten die udev regeln bei der Quadmouse so:

 
Zuletzt bearbeitet:
AW: FAQ: Reader ein festen Port zuweisen.

Hallo, möchte mich mal hier einklinken.

Ich habe hier einen Igel mit Debian und Oscam und einer S02 in einer Easymouse laufen. Funzt auch soweit alles, wenn ich den Reader in der Config mit ttyUSB0 anspreche.
Jetzt hab ich alles so gemacht wie auf Seite 1 beschrieben, aber Oscam sagt mir im WebIf unter Status "Unknown".
Hier mein Log:
2013/12/10 22:49:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2422
2013/12/10 22:49:13 0 s services reloaded: 0 services freed, 9 services loaded, rejected 0
2013/12/10 22:49:13 0 s userdb reloaded: 39 accounts loaded, 0 expired, 0 disabled
2013/12/10 22:49:13 0 s signal handling initialized
2013/12/10 22:49:13 0 s 136 service-id's loaded in 3ms
2013/12/10 22:49:13 0 s 116 tier-id's loaded
2013/12/10 22:49:13 0 s 3 provid's loaded
2013/12/10 22:49:13 0 s cccam: initialized (fd=3, port=19781, ip=192.168.178.251)
2013/12/10 22:49:13 0 s s02 [mouse] creating thread for device /dev/S02-1
2013/12/10 22:49:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/10 22:49:13 0 s waiting for local card init
2013/12/10 22:49:13 8E70F30 r s02 [mouse] ERROR: Opening device /dev/S02-1 (errno=2 No such file or directory)
2013/12/10 22:49:13 8E70F30 r s02 [mouse] Cannot open device: /dev/S02-1
2013/12/10 22:49:13 8E73028 h webif: decompressed 53268 bytes back into 152828 bytes
2013/12/10 22:49:13 8E73028 h HTTP Server running. ip=192.168.178.251 port=83
2013/12/10 22:50:13 8E70F30 r s02 [mouse] ERROR: Opening device /dev/S02-1 (errno=2 No such file or directory)
2013/12/10 22:50:13 8E70F30 r s02 [mouse] Cannot open device: /dev/S02-1

Und hier meine oscam.server
[reader]
label = s02
protocol = mouse
device = /dev/S02-1
caid = 1702,1833,1834,09C4
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2

Oscam-Version ist: OSCAM 1.20-unstable_svn build r8917

Kann mir jemand helfen?

Danke und Gruß!
 
AW: FAQ: Reader ein festen Port zuweisen.

Wie sieht den deine Udev-Rule genau aus?
Probier mal ohne minus und stattdessen mit _
 
AW: FAQ: Reader ein festen Port zuweisen.

Die sieht so aus:
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A400fRHC", SYMLINK+="S021"

Das Minus-Zeichen hab ich schon rausgenommen, vorsorglich.
Shit, hab die Serial aus dem Beispiel übernommen. Geändert, mache gerade Neustart.
 
AW: FAQ: Reader ein festen Port zuweisen.

Jetzt läufts!

Aber mal was Anderes: Ist die Oscam.server so okay, oder gibts da noch was zu tunen?

ECM-Zeiten jetzt mit einem Client bei 600 ms.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

  • Gelöst
Proxmox LXC > Oscam > usb Easymouse
Antworten
14
Aufrufe
2K
iceman75
W
gelöst HD+ 05 Karte aktivieren
2 3
Antworten
34
Aufrufe
923
wfra1
W
H
gelöst OSCAM ORF läuft..nicht
2 3
Antworten
35
Aufrufe
2K
Kind regards
T
NC+ entschlüsselt manche Sender nicht mehr
2
Antworten
15
Aufrufe
861
GummibärenBande
G
T
gelöst HD02 Dunkel - weil angeblich abgelaufen?
2
Antworten
16
Aufrufe
679
bubbl
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…