K
@alex schwer zu sagen da du nich sagst was du "mit deinen bedürfnissen angeglichen meinst!"
musst schon konkreter werden und en comlog täte auch nich schaden!
Evolux Version=1.9.2
Onlineupdate:
- Neutrino:
- Mainmenu->replace sleeptimer with restart<-
- Movieplayer small fix
- Telextext Zoom function add (thx martii)
(Page+-)
#############################################################
Evolux Version=1.9.3
Onlineupdate:
- Neutrino:
- Webif LiveView fixxed
#############################################################
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
af9013: firmware version:4.65.0
DVB: registering adapter 1 frontend 0 (Afatech AF9013 DVB-T)...
NXP TDA18218 successfully identified.
the mknod for create device we can place in function dualTuner on rcS but we need to what kind of mknod specs!
did you try evomMC for subtitles?
Evolux Version=1.9.5
Onlineupdate:
- Ntrino:
- EPGview-window fix (thx martii)
- All:
- Amiko-RC vol+- fix please test
#############################################################
Evolux# awk '/DVB/ { print $1 }' /proc/devices
mkdir /dev/dvb/adapter1
mknod /dev/dvb/adapter1/video0 c 212 64
mknod /dev/dvb/adapter1/audio0 c 212 65
mknod /dev/dvb/adapter1/frontend0 c 212 67
mknod /dev/dvb/adapter1/demux0 c 212 68
mknod /dev/dvb/adapter1/dvr0 c 212 69
mknod /dev/dvb/adapter1/ca0 c 212 70
mknod /dev/dvb/adapter1/net0 c 212 71
mknod /dev/dvb/adapter1/osd0 c 212 72
card=1
freq=818
dont_send_sdt=1
multicast=0
unicast=1
port_http=1234
ip_http=0.0.0.0
sap=1
autoconfiguration=full
EvoLux:~# mumudvb --card 1 -c /etc/mumudvb/818 -v -d
MuMuDVB Version 1.7
--- Build information ---
Built without CAM support.
Built without transcoding support.
Built with ATSC support.
---------
Originally based on dvbstream 0.6 by (C) Dave Chapman 2001-2004
Released under the GPL.
Latest version available from http://mumudvb.braice.net/
Project from the cr@ns (http://www.crans.org)
by Brice DUBOST (mumudvb@braice.net)
WARN: Main: Config issue : unknow symbol : dont_send_sdt
WARN: Unicast : You have enabled the support for HTTP Unicast. This feature is quite youg, please report any bug/comment
Info: SAP: Sap announces will be sent
Info: Main: Full autoconfiguration, we activate PAT rewritting. if you want to deactivate it see the README.
Info: Main: Full autoconfiguration, we activate SDT rewritting. if you want to deactivate it see the README.
Info: Main: Full autoconfiguration, we activate sorting of the EIT PID. if you want to deactivate it see the README.
Info: Main: ========== End of configuration, MuMuDVB version 1.7 is starting ==========
Info: Autoconf: The autoconfiguration auto update is enabled. If you want to disable it put "autoconf_pid_update=0" in your config file.
WARN: Logs: saving_filename /var/run/mumudvb/mumudvb_generated_conf_card1_tuner0: No such file or directory
Info: Main: NO Multicast, SAP announces are deactivated.
WARN: Main: Can't create /var/run/mumudvb/channels_streamed_adapter1_tuner0: No such file or directory
WARN: Main: Can't create /var/run/mumudvb/channels_unstreamed_adapter1_tuner0: No such file or directory
Info: Main: Streaming. Freq 818000
Info: Tune: Using DVB card "Afatech AF9013 DVB-T" tuner 0
Info: Tune: Tuning DVB-T to 818000000 Hz, Bandwidth: 8000000
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Deb0: Tune: polling....
Deb0: Tune: Getting frontend event
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: FE_HAS_VITERBI : FEC is stable
Info: Tune: FE_HAS_SYNC : found sync bytes
Info: Tune: FE_HAS_LOCK : everything's working...
Info: Tune: Event: Frequency: 818000000
Info: Tune: Bit error rate: 0
Info: Tune: Signal strength: 225
Info: Tune: SNR: 50
Info: Tune: FE_STATUS:
Info: Tune: FE_HAS_SIGNAL : found something above the noise level
Info: Tune: FE_HAS_CARRIER : found a DVB signal
Info: Tune: FE_HAS_VITERBI : FEC is stable
Info: Tune: FE_HAS_SYNC : found sync bytes
Info: Tune: FE_HAS_LOCK : everything's working...
Info: Main: Card 1, tuner 0 tuned
Info: Unicast: We open the Master http socket for address 0.0.0.0:1234
Info: Autoconf: Autoconfiguration Start
Deb0: Autoconf: Iconv not present, no name encoding conversion
Deb0: Autoconf: Iconv not present, no name encoding conversion
Deb0: Autoconf: Iconv not present, no name encoding conversion
Deb0: Autoconf: Iconv not present, no name encoding conversion
Deb0: Autoconf: Iconv not present, no name encoding conversion
Deb0: Autoconf: service updated PMT PID : 34 id 0x1 name "BNT"
Deb0: Autoconf: service updated PMT PID : 38 id 0x2 name "TV Europa"
Deb0: Autoconf: service updated PMT PID : 42 id 0x3 name "BBT"
Deb0: Autoconf: service updated PMT PID : 46 id 0x4 name "The voice"
Deb0: Autoconf: service updated PMT PID : 50 id 0x5 name "VTV"
Deb0: Autoconf: Service without a PMT pid, we skip. Name ""
Deb0: Autoconf: We convert a new service into a channel, sid 1 pmt_pid 34 name "BNT"
Deb0: Autoconf: service type: 0x1 : Television
Deb0: Autoconf: We convert a new service into a channel, sid 2 pmt_pid 38 name "TV Europa"
Deb0: Autoconf: service type: 0x1 : Television
Deb0: Autoconf: We convert a new service into a channel, sid 3 pmt_pid 42 name "BBT"
Deb0: Autoconf: service type: 0x1 : Television
Deb0: Autoconf: We convert a new service into a channel, sid 4 pmt_pid 46 name "The voice"
Deb0: Autoconf: service type: 0x1 : Television
Deb0: Autoconf: We convert a new service into a channel, sid 5 pmt_pid 50 name "VTV"
Deb0: Autoconf: service type: 0x1 : Television
Deb0: Autoconf: PIDs for channel 0 "BNT" : 34 33 32 768
Deb0: Autoconf: PIDs for channel 2 "BBT" : 42 41 40
Deb0: Autoconf: PIDs for channel 4 "VTV" : 50 49 48
Deb0: Autoconf: PIDs for channel 3 "The voice" : 46 45 44
Deb0: Autoconf: PIDs for channel 1 "TV Europa" : 38 37 36
Deb0: Autoconf: Autoconfiguration almost done
Deb0: Autoconf: We open the new file descriptors
Deb0: Autoconf: Add the new filters
Deb0: Autoconf: We search for the NIT
Deb0: Autoconf: Iconv not present, no name encoding conversion
Deb0: Autoconf: --- NIT descriptor --- terrestrial delivery system descriptor
Deb0: Autoconf: Frequency: 818000000Hz
Deb0: Autoconf: Bandwidth: 8MHz
Deb0: Autoconf: Priority: HP (high priority)
Deb0: Autoconf: Time_Slicing_indicator: 0
Deb0: Autoconf: MPE_FEC_indicator: 0
Deb0: Autoconf: Constellation: 16-QAM
Deb0: Autoconf: hierarchy_information: non-hierarchical, native interleaver
Deb0: Autoconf: code_rate_HP_stream: 2/3
Deb0: Autoconf: code_rate_LP_stream: 2/3
Deb0: Autoconf: guard_interval: 1/16
Deb0: Autoconf: transmission_mode: 8k
Deb0: Autoconf: other_frequency_flag: one or more other frequencies are in use
Deb0: Autoconf: --- descriptor done ---
Deb0: Autoconf: --- NIT descriptor --- Service list descriptor
Deb0: Autoconf: Service ID : 0x1 service type: 0x1 : Television
Info: Autoconf: Autoconfiguration done
Info: Autoconf: Diffusion 5 channels
Info: Autoconf: Channel number : 0, name : "BNT" service id 1
Info: Autoconf: Multicast4 ip : :0
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:1234
Deb0: Autoconf: pids : 34 (PMT), 33 (Video (MPEG4-AVC)), 32 (Audio (MPEG1) eng), 768 (VBI Data),
Info: Autoconf: Channel number : 1, name : "TV Europa" service id 2
Info: Autoconf: Multicast4 ip : :0
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:1234
Deb0: Autoconf: pids : 38 (PMT), 37 (Video (MPEG4-AVC)), 36 (Audio (MPEG1) eng),
Info: Autoconf: Channel number : 2, name : "BBT" service id 3
Info: Autoconf: Multicast4 ip : :0
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:1234
Deb0: Autoconf: pids : 42 (PMT), 41 (Video (MPEG4-AVC)), 40 (Audio (MPEG1) eng),
Info: Autoconf: Channel number : 3, name : "The voice" service id 4
Info: Autoconf: Multicast4 ip : :0
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:1234
Deb0: Autoconf: pids : 46 (PMT), 45 (Video (MPEG4-AVC)), 44 (Audio (MPEG1) eng),
Info: Autoconf: Channel number : 4, name : "VTV" service id 5
Info: Autoconf: Multicast4 ip : :0
Info: Autoconf: Unicast : Channel accessible via the master connection, 0.0.0.0:1234
Deb0: Autoconf: pids : 50 (PMT), 49 (Video (MPEG4-AVC)), 48 (Audio (MPEG1) eng),
WARN: Logs: Error config_file /var/run/mumudvb/mumudvb_generated_conf_card1_tuner0: No such file or directory
Deb0: PAT Rewrite: NEW program for channel 0 : "BNT". PMT pid : 34
Deb0: PAT Rewrite: NEW program for channel 1 : "TV Europa". PMT pid : 38
Deb0: PAT Rewrite: NEW program for channel 2 : "BBT". PMT pid : 42
Deb0: PAT Rewrite: NEW program for channel 3 : "The voice". PMT pid : 46
Deb0: PAT Rewrite: NEW program for channel 4 : "VTV". PMT pid : 50
Deb0: SDT rewrite: Full SDT updated. section number 0, last_section_number 0
Deb0: Main: The SDT version changed, we force the update of all the channels.
Deb0: SDT rewrite: NEW program for channel 0 : "BNT". service_id : 1
Deb0: SDT rewrite: NEW program for channel 1 : "TV Europa". service_id : 2
Deb0: SDT rewrite: NEW program for channel 2 : "BBT". service_id : 3
Deb0: SDT rewrite: NEW program for channel 3 : "The voice". service_id : 4
Deb0: SDT rewrite: NEW program for channel 4 : "VTV". service_id : 5
Wir verwenden Cookies und ähnliche Technologien für folgende Zwecke:
Akzeptieren Sie Cookies und diese Technologien?
Wir verwenden Cookies und ähnliche Technologien für folgende Zwecke:
Akzeptieren Sie Cookies und diese Technologien?