Easymouse 2 in Oscam einrichten

[Noname0990]

Hallo Leute,


ich habe meinen Server und Oscam installiert.
Ich habe mir einen Easymouse 2 Reader gekauft und benutze eine V14 Karte.
Jetzt habe ich einige Fragen und wäre für kurze Antworten sehr dankbar.


1. Easymouse Einstellung: Oben, unten, unten und unten richtig?
2. Der Reader leuchtet nur kurz grün, wenn ich die Karte reinschiebe, aber bleibt nicht an. Ist das okay?
3. Wie stelle ich den Reader in Oscam ein? Bzw. was muss ich noch einstellen?
4. Die Karte war bereits aktiv und ich habe den Server jetzt neu augesetzt. Muss ich irgendetwas beachten?


Was muss noch beachten?


Danke Leute


PS: Riesen Lob an den super Support hier!

Was gebe ich bei meinem Reader bei Device ein, wenn Easmouse an Bus 003 Device 003 hängt?

- - - - - - - - - -

Spoiler

2016/02/26 05:02:33 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB2
2016/02/26 05:02:33 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:33 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:35 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:35 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:37 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:37 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:39 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:39 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:41 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:41 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:43 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:43 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:45 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:45 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:47 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:47 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:49 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:49 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:51 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:51 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:02:53 295919F2 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB2 (errno=2 No such file or directory)
2016/02/26 05:02:53 295919F2 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB2
2016/02/26 05:03:49 3AE48979 h (reader) V14 [mouse] Restarting reader
2016/02/26 05:03:49 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB3
2016/02/26 05:03:49 0C2AD00F r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:03:49 0C2AD00F r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:03:50 3AE48979 h (webif) Refresh Readers requested by WebIF from 192.168.2.129
2016/02/26 05:03:51 3AE48979 h (config) readerdb 1 readers freed
2016/02/26 05:03:51 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB3
2016/02/26 05:03:51 3AE48979 h (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/02/26 05:03:51 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:03:51 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:03:53 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:03:53 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:03:55 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:03:55 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:03:57 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:03:57 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:03:59 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:03:59 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:04:01 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:04:01 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:04:03 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:04:03 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:04:05 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:04:05 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:04:07 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:04:07 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:04:09 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:04:09 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:04:11 6C81FBC0 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:04:11 6C81FBC0 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:17 3AE48979 h (reader) V14 [mouse] Restarting reader
2016/02/26 05:06:17 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB3
2016/02/26 05:06:17 4835AB0D r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:17 4835AB0D r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:19 4835AB0D r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:19 4835AB0D r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:21 4835AB0D r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:21 4835AB0D r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:23 4835AB0D r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:23 4835AB0D r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:25 4835AB0D r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:25 4835AB0D r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:27 4835AB0D r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:27 4835AB0D r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:29 3AE48979 h (webif) Refresh Readers requested by WebIF from 192.168.2.129
2016/02/26 05:06:30 3AE48979 h (config) readerdb 1 readers freed
2016/02/26 05:06:30 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB3
2016/02/26 05:06:30 3AE48979 h (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/02/26 05:06:30 559EBF69 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:30 559EBF69 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:32 559EBF69 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:32 559EBF69 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:34 559EBF69 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:34 559EBF69 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:34 3AE48979 h (webif) Refresh Readers requested by WebIF from 192.168.2.129
2016/02/26 05:06:36 3AE48979 h (config) readerdb 1 readers freed
2016/02/26 05:06:36 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB3
2016/02/26 05:06:36 3AE48979 h (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/02/26 05:06:36 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:36 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:38 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:38 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:40 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:40 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:42 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:42 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:44 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:44 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:46 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:46 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:48 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:48 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:50 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:50 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:52 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:52 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:54 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:54 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:06:56 60D9CEB7 r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:06:56 60D9CEB7 r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:10 3AE48979 h (webif) Refresh Readers requested by WebIF from 192.168.2.129
2016/02/26 05:21:12 3AE48979 h (config) readerdb 1 readers freed
2016/02/26 05:21:12 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB3
2016/02/26 05:21:12 3AE48979 h (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/02/26 05:21:12 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:12 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:14 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:14 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:16 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:16 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:18 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:18 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:20 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:20 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:22 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:22 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:24 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB3 (errno=2 No such file or directory)
2016/02/26 05:21:24 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB3
2016/02/26 05:21:26 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB5 (errno=2 No such file or directory)
2016/02/26 05:21:26 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB5
2016/02/26 05:21:28 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB5 (errno=2 No such file or directory)
2016/02/26 05:21:28 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB5
2016/02/26 05:21:30 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB5 (errno=2 No such file or directory)
2016/02/26 05:21:30 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB5
2016/02/26 05:21:32 0DCE4C6E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB5 (errno=2 No such file or directory)
2016/02/26 05:21:32 0DCE4C6E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB5
2016/02/26 05:24:41 3AE48979 h (reader) V14 [mouse] Restarting reader
2016/02/26 05:24:41 3AE48979 h (reader) V14 [mouse] creating thread for device /dev/ttyUSB003:003
2016/02/26 05:24:41 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:41 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:43 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:43 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:45 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:45 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:47 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:47 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:49 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:49 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:51 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:51 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:53 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:53 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:55 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:55 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:57 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:57 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:24:59 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003 (errno=2 No such file or directory)
2016/02/26 05:24:59 0690293E r (reader) V14 [mouse] Cannot open device: /dev/ttyUSB003:003
2016/02/26 05:25:01 0690293E r (reader) V14 [mouse] ERROR: Opening device /dev/ttyUSB003:003

Das wird mit im Moment angezeigt...

 

[dodo83]

AW: Easympouse 2 in Oscam einrichten

hi,

1. Ok, muss halt zum Reader passen und umgekehrt
2. Ok, die Lämpchen leuchten wenn Traffic ensteht
3. Was oder wie hast du es eingestellt, ein v14 Reader sollte etwa so aussehen:

Spoiler

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

4. Eigentlich das was man vorher schon beachten sollte

Device, siehe oben, bei einem Reader würde ich es so eintragen

 

[liwool]

AW: Easympouse 2 in Oscam einrichten

So wie ich das Sehe können die Mäuse nicht zu geordnet werden. Udev-Regeln
Was fürn System hast du.
am besten mal die configs Posten im Spoiler

 

[Noname0990]

AW: Easymouse 2 in Oscam einrichten

Meine Einstellungen:

oscam.config

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 4069
preferlocalcards = 1


[cache]


[cccam]
port = 11022
nodeid = 95B602D2104914AC
version = 2.3.0


[webif]
httpport = 54321
httpuser = oscam
httppwd = oscam
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,1.1.1.0-255.255.255.255

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11211
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
ndsversion = 2

 

[FoooLs]

AW: Easymouse 2 in Oscam einrichten

blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255

Diese Einstellung sollte ganz schnell entfernt werden.
Stattdessen

saveemm-u = 1 in die oscam.server

 

[tulpenknicker]

AW: Easymouse 2 in Oscam einrichten

versuch es mal so

Spoiler

label = V14
protocol = mouse
device = /dev/ttyUSB0 # oder mal die ttyUSB1 probieren
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2

SOFORT das bylen rausnehmen. und dafür blockemm-u = 1 Schalterstellung der easymouse nochmals überprüfen ob Oben/Unten/Unten/Oben

@zzuubb

Stattdessen sollte er lieber blocken anstatt emm zu sichern:emoticon-0105-wink:

 

[Noname0990]

AW: Easymouse 2 in Oscam einrichten

Also soll Wenn ich später daheim bin dann probiere ich mal deine Config Tulpenknicker.

Wie finde ich den richtigen USB-Slot? Bei mir wird angezeigt, dass der Reader in Bus 003 und Device 003 ist. Was gebe ich bei (device = /dev/ttyUSB0) also an?

Ich habe den Easymouse 2 Premium Reader, muss dort die Karte ganz reingeschoben werden? Beim reinschieben leuchtet es zwei mal kurz auf.

Danke

 

[tulpenknicker]

AW: Easymouse 2 in Oscam einrichten

Ganz passt sie nicht rein.....aber ich weiß was du meinst. ja muss sie.
Dass sie kurz aufleuchtet ist ok

 

[Noname0990]

AW: Easymouse 2 in Oscam einrichten

Also ich steck die rein bis es nicht mehr geht? Weil ich gelesen habe, dass man es nicht ganz rein schieben darf.

 

[liwool]

AW: Easymouse 2 in Oscam einrichten

Was für ein System hast du. dann kann man die Reader fest verlinken.

 

[Noname0990]

AW: Easymouse 2 in Oscam einrichten

Es ist ein Futro

 

[tulpenknicker]

AW: Easymouse 2 in Oscam einrichten

Also ich steck die rein bis es nicht mehr geht? Weil ich gelesen habe, dass man es nicht ganz rein schieben darf

Einfach karte vorsichtig in den reader schieben bis ganz nach unten......dann sollte auch nichts passieren.

 

[liwool]

AW: Easymouse 2 in Oscam einrichten

Futro mit IPC nehme ich mal an.

dann kannst du über da WEBIF des IPC die Regeln erstellen.
unter SYSTEM--->Manager IPC UDEV

Den READER-Namen den Du da Anlegst ist dann dein Readername in Oscam

oder per WINSCP

/etc/udev/rules.d/91-usb.rules

z.b.

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AD02EACP", SYMLINK+="sky_v14_card1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="AD02E9O1", SYMLINK+="hdplus_card_white1"

man vergibt jedem Reader eine festen Namen

der oscam.server wäre dann die EASYMOUSE mit der Serial AD02EACP
dann der reader

device = /dev/sky_v14_card1

und EASYMOUSE mit der Serial AD02E901

device = /dev/hdplus_card_white1