E2-Image von TeamCS/Ducktrick

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

Okay, und das ganze mit Version 9.10, angesclossenen Hub und Platte. Richtig?

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

jup genau, einfach das ich im log mal sehe was da passiert , ruhig auch mal 2-3 mal starten das scroll ih mir dann zurecht

 

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

ÄM, ich brauch da mal Hilfe, hae gerade einen USB Serial Adapter gefunden und mal angeschlossen. Da koomt so etwas.

Spoiler

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.10.17 23:42:55 =~=~=~=~=~=~=~=~=~=~=~=
ëcZcûîãßRîæWgúâkk½çccûRúbãßûRúæcSoúûRúbãßûRúæcSoúûRúbóßûRúæcSÿúRúbgûRoæcSúûRúbãßûRúæcSoúûúãßRúæWcúûRúbãßûRúæcSoúûRúbãßûRúæcSoúûRæþãßûRæcSbïk3¹#ccûRúbãÿûRúöcSoþûRúbãßûRúæcSoúûRæbãßûRææcSoúêkkïwÇc÷Ò¶wÇçrÓÿ~ÏkâÓËÞÏÎÏÎÏÎwÇkãfëKËfëëfffêêêFf[ïæËïvGïöÇë÷kÇêêjGïßksûOBWÏïï×ÏïïgþBBBBÂFêkÊFæÂFÒBÊFBBBÂcÖÆÚëBBëçÿOÿ×ßïïãêËúîîÊâêÊÇb{JSkgÃççâBBâÂzBBBWÂjoGrORfïBcBçzoçãëú÷óë×óãËãoïãoÿ×îBBZbbþffVÎãgÿþþþëÿëKæãÿëþëþëþëþëþGëëþëþëëëþëþëëþëþëþëþëþëþëþþþëëþëþëþþãvBokBJïæÛãCöÿüÿÿÿÿüÿÿÿÿÿÿÿÿüüÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿüÿÿÿÿÿüüÿþãoîÿBjkÞÿfÒfFÓêËÿfZaÚ^*ÿfÒBÂbjæ×ÚÏRVZbâfffVÎãgÿþþËþëÿëKæógãËgã_ÆÇæfËfN^êFRÒÒâËúKëWó×RZgoGRÊÿâ{ËòGïëGckfbGkÃ÷gïïúÿûÃïWÏïïçÊKâZ+ÇWïïï××××ÇççÊKâRë[sççççççë÷oëßëocÿûOÏoÏãê˺gîÊâîÂÇbÚâRV×{JSkgj{ââgCbgoÃçâBBâÂzBBBWÂjoGrORfïBcBë~oOoBkNBÂBFBBFBFBFBjBBBBjJBBBjJBBBjBBFBbFBFBBVBBBZBÂFB[JBÊBRNBÊBRBÂFBnFBÆBfBBËBbFBÆBjBBÆBfBBÂBjJêBB~JBFÂÂBsBBËBFBÂBvJÂFBzJBÆgrw_ïÿûcÿÿWÏïïûëwçkÿwËßKÿkkj{oÿköoÛöÖâbföffâæÂâbâbfbòbÆfbbbbbæbæbæbfbîÿþêbçúïïïïêïoÿãBòJKþwëJþ[ROVCjÇãËãgãkfÇfæëþFïãvGçæßãoëkfÛGoÛgGcgGcgGcòæãgæfcÓÿêfïþnKSSúããËgfãffffÇÿ~ãkcúGkëcûkosûsëãrkçsccïãgããîþkÿþÿþÿþÿþÿþâëkÏÿþGkÿ~ÿ~ÿÿ~ÿþÿþÿþÿþÿ~ÿþÿþÿþÿþGkgæÿãããvkãççVçVçVçVVçVçVçVçbççâççbççâçbç^ÿóëçÖcZÿëÿþgrîëçgûçvãÿócâcwkkïîþÃ{öússëãwãËêÃÿþÿ~oÿ~ocãÿ~ÿÿãÿocf~ocãÿ~î{ÿocf~ocãÿ~îcãÿ~îccÿof~ocf~o{coKïÿkß~OjfOjîOjÂOjêß~âoïãRòÂOjîOjÂOjOjâOúÆÿâËkfÿâËãîfÿâËãîfÿâËãîfÿâËãîfÿâËãîfÿâËãîfÿâËãîfÿâËãîfÿâËãîfÿâËoÿâËãîfÿâËãîþÿþçn{ÿþWkÿïË÷ããccËã×Sçã×Sçã×Sçã×SçVçã×{ïÆÿþcßcÿKBWjóîgçcokcoccoëcoëÛcokcosÿÏïgëâgïKúogKcîëËûãk÷ëãûëÏzçgûÇOϽÒêcRûSêcRækëckëkëçûçnçÇgÏckëïÆÂcûcccccccwccîþcccccccccccccócccûcccccccccûcûûccccûccûûûcûûûûûûcÿþûûcccŸïwkksûãÎkkKVRc[þnjbOkî{ÒÇÿþïCësûÇkÏgbkÏoKoKoþëßêcþæÆÛþcâ[c~ãkãkcçRÂRBRÂkãwGûJÂJBRBËçRÂRBRÂfïJnBããkÓÇïÛ[ÆnîîGGÊnîÂîîîîîcBkÏWÞc_ßSjRúÒbRgÓnfRRÆÖÒOz~ÿÿþÿþgûëkoKêÓâûJÂkBRçRRBÂÂjfïJnBãã{SÛ[ëCêãÒkoÒÛFRSFâBÂBBBÂæJJÃFBFFFNOBBBFÂÂÂBBFFFFFFOBCBFbFKÆBJCÂBFÂÊÊÂBBÂNâBbBBÂBcBCjFCÂBFÂÊÊÂBBÂNâBbBBÂJBCBBæûJÂJBRBËçJÂJBRÂKïOîGËc{kÏwSoSkwk~fcëcZcs÷îGËîîkÛkk×ûçëcãÛsã

KKannst Du damit was anfangen???

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

hehe nee , aber du musst bei putty den speed auf 115200 stellen dann sieht das besser aus

 

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

Das ist von der funktionierenden Version.

Spoiler

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.10.18 00:13:48 =~=~=~=~=~=~=~=~=~=~=~=
lircd-0.8.2[711]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(vorher)


lircd-0.8.2[711]: not blocked fd =-1


lircd-0.8.2[711]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 17 -> menu lircd.conf_FB2

action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
lircd-0.8.2[711]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[711]: not blocked fd =-1


lircd-0.8.2[711]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
Z)hV)Ä>…{`@
lircd-0.8.2[711]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[711]: not blocked fd =-1


lircd-0.8.2[711]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
Z)hV)Ä>…{`@
action -> OkCancelActions ok
okbuttonClick
SleepTimerEdit SleepTimerEdit
Standby Standby
Standby TryQuitMainloop
Standby TryQuitMainloop
Standby TryQuitMainloop
allocating new converter!
allocating new converter!
lircd-0.8.2[711]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[711]: not blocked fd =-1


lircd-0.8.2[711]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)Ä>…{`@
lircd-0.8.2[711]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[711]: not blocked fd =-1


lircd-0.8.2[711]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)Ä>…{`@
lircd-0.8.2[711]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[711]: not blocked fd =-1


lircd-0.8.2[711]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)Ä>…{`@
action -> OkCancelActions ok
okbuttonClick
Looking for embedded skin
stopService
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:EF10:421:1:C00000:0:0:0:
AUDIO_CONTINUE - ok
start release channel timer
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x16e2a04>}
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- saving lame channel db
saved 137 channels and 2369 services!
release cached channel (timer timeout)
[eDVBCAService] remove channel 0x135c768
[eDVBLocalTimerHandler] remove channel 0x135c768
[eEPGCache] remove channel 0x135c768
stop release channel timer
[EPGC] store epg to realpath '/media/sdb1/epg.dat'
[EPGC] 3748 events written to /media/hdd/epg.dat
thread joined 0
set RTC to previous valid time
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
- (35) CI Slots
deleteSessions >
deleteSessions <
deleteSessions >
deleteSessions <
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (20) Socket MMI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (1) Background File Eraser
reached rl -1
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
e2 ended <- RTV: 2
2
REBOOT
/etc/init.d/rcS: line 592: can't create /dev/vfd: No such device or address
/var/config/shutdown/reboot.sh: line 2: can't create /dev/vfd: No such device or address

INIT: Entering runlevel: 3


* * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* >> Willkommen by TeamCS Enigma2_GStreamer *
* *
* >> Dieses Image wurde erstellt von Ducktrick *
* *
* >>

Sie müssen registriert sein, um Links zu sehen.

*
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * *
login[1168]: root login on 'ttyAS0'



BusyBox v1.19.3 (2012-01-31 23:46:56 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

ArgusVIP:~# killall: enigma2: no process killed
/var/config/shutdown/reboot.sh: line 8: can't create /dev/vfd: No such device or address
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/reboot.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 30, Duration = 287 (9)
StartMp4: Track 0 type = 'vide'
BuildTrackMap: MOV track type 'vide': 287 chunks, 287 samples
BuildTrackMap: TimeScale 30, Delta 1
ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
umount: can't forcibly umount /dev/sdc1: Invalid argument
killall: showiframe: no process killed

INIT: Switching to runlevel: 6


INIT: Sending processes the TERM sSending all processes the TERM signal...lircd-0.8.2[711]: caught signal

done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3 2 1 0
(Re)start USB...
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Segmentation fault
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Dual Tuner /devs Vorhanden, kein erstellen nötig ...
Dual Tuner /devs erstellen ...
Dual Tuner /devs erstellen ... FERTIG
Lade Filesystem Treiber ext3 ext4 ...
Fertig
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp.
Hostname: ArgusVIP.
starting telnetd
init stmfb
LOADING MODULES
/etc/init.d/rcS: line 168: can't create /dev/vfd: No such device or address
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 660
seeking to a1a0
seeking to 12740
seeking to 15ce00
seeking to 15ce38
seeking to 15ce70
seeking to 1a0060
seeking to 1a0068
seeking to 1a0070
seeking to 1a0100
seeking to 1bc920
seeking to 1bea00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
AVS Aktiviert -- VIP2
init player 191
init frontends
Tuner Aktiviert -- Sharp und LG gesetzt
init drivers
np-PTI Laden...
Swap Laden ...
Kartenslots Aktivieren ...
init lircd
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/bootlogo.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 25, Duration = 429 (17)
StartMp4: Track 0 type = 'vide'
StartMp4: 'mdhd' Track 1, TimeScale = 48000, Duration = 819200 (17)
StartMp4: Track 1 type = 'soun'
BuildTrackMap: MOV track type 'vide': 429 chunks, 429 samples
BuildTrackMap: TimeScale 25, Delta 1
BuildTrackMap: MOV track type 'soun': 800 chunks, 800 samples
BuildTrackMap: TimeScale 48000, Delta 1024
*** Composition Data not present.
lircd-0.8.2[711]: lircd(userspace) ready

ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
PlayH264Mp4File: nal length past end of buffer - sample 0 size 554697824 frame offset 705 left 423
Fernbedienung NEU geladen
Mounting local filesystems...
Model: hl101
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Hl101 RemoteControl
RemoteControl Map:
STANDBY - 01 - 116
MUTE - 04 - 113
V.FORMAT - 02 - 47
- - 390
0BUTTON - 12 - 11
1BUTTON - 09 - 2
2BUTTON - 0a - 3
3BUTTON - 0b - 4
4BUTTON - 0c - 5
5BUTTON - 0d - 6
6BUTTON - 0e - 7
7BUTTON - 0f - 8
8BUTTON - 10 - 9
9BUTTON - 11 - 10
BACK - 14 - 158
INFO - 1a - 358
- - 392
DOWN/P- - 20 - 108
UP/P+ - 1f - 103
RIGHT/V+ - 21 - 106
LEFT/V- - 22 - 105
v+ - 1b - 115
v- - 1c - 114
p+ - 1d - 103
p- - 1e - 108
OK/LIST - 23 - 352
MENU - 17 - 139
GUIDE - 25 - 365
EXIT - 24 - 102
FAV - 19 - 364
RED - 32 - 398
GREEN - 33 - 399
YELLOW - 34 - 400
BLUE - 35 - 401
REWIND - 2c - 168
PAUSE - 28 - 119
PLAY - 29 - 207
FASTFORWARD - 2d - 208
RECORD - 16 - 167
STOP - 27 - 128
SLOWMOTION - 30 - 409
ARCHIVE - 26 - 361
SAT - 18 - 381
STEPBACK - 2a - 412
STEPFORWARD - 2b - 407
MARK - 25 - 365
TV/RADIO - 13 - 378
USB - 31 - 206
TIMER - 03 - 359
Supports Long KeyPress: 0
lircd-0.8.2[711]: accepted new client on /dev/lircd

Hostname: ArgusVIP.
starting telnetd
Starting FTP server: vsftpd.
Deconfiguring network interfaces... done.
/etc/init.d/rcS: line 543: can't create /dev/vfd: No such device or address
LOADING E2
starting e2->
Emu Autostart ...
Emu Autostart ... FERTIG
Setting up IP spoofing protection: RAM Leeren ...
RAM Leeren ... FERTIG
rp_filter.
Configuring network interfaces... Oscam startet...
Oscam ist gestartet
done.
/usr/local/bin/enigma2: /usr/lib/libjpeg.so.8: no version information available (required by /usr/local/bin/enigma2)
Display Uhr nicht Aktiv ...
Autonews inaktiv ...
Samba Server Starten ...
FERTIG
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '${prefix}', 0)
setenv('bindir', '${exec_prefix}/bin', 0)
setenv('sbindir', '${exec_prefix}/sbin', 0)
setenv('libexecdir', '${exec_prefix}/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/local/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '${prefix}/com', 0)
setenv('localstatedir', '${prefix}/var', 0)
setenv('libdir', '${exec_prefix}/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/local/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/usr/com', 1)
setenv('localstatedir', '/usr/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/local/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5120)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error: No matching USB device found!
config -> (w 320, h 240)
lcd buffer 0x2aefe008 153600 bytes, stride 640
eDBoxLCD::eDBoxLCD (w 320, h 240, depth 16)<
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
eDVBCI_UI >
eDVBCI_UI <
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is not a keyboard.
failed to open /dev/input/event1
Input device "" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
deleteSessions >
deleteSessions <
CI Slot 1: reset requested
deleteSessions >
deleteSessions <
stat on /dev/dvb/adapter0/ci2 failed

CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
main thread is non-idle! display spinner!
no spinner DC!
loaded 2369 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
found 1 adapter, 1 frontends(1 sim) and 3 demux, boxtype 12
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/local/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/local/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/local/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/local/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/local/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
main thread is non-idle! display spinner!
main thread is non-idle! display spinner!
StopMp4:
Player: Terminating 1
CheckKey: Attempting to shut down
End of file (1): Running time = 18 seconds
Linux DVB Test terminating
couldn't open fp
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1']
[Harddisk] start automount
found block device 'sda1': error querying properties
found block device 'sdb': ok, removable=False, cdrom=False, partitions=['sdb1']
new Harddisk sdb -> /dev/sdb -> /dev/sdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
[Harddisk] start automount
found block device 'sdb1': error querying properties
found block device 'ramzswap0': ok, removable=False, cdrom=False, partitions=[]
couldn't read model: [Errno 2] No such file or directory: '/sys/devices/virtual/block/ramzswap0/device/model'
Preferred tag editor set to None
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/local/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/local/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED25.tv
158 entries in Bouquet userbouquet.ED25.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.tv
134 entries in Bouquet userbouquet.ED00.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED01.tv
67 entries in Bouquet userbouquet.ED01.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED02.tv
14 entries in Bouquet userbouquet.ED02.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED03.tv
45 entries in Bouquet userbouquet.ED03.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED04.tv
20 entries in Bouquet userbouquet.ED04.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED23.tv
12 entries in Bouquet userbouquet.ED23.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED26.tv
118 entries in Bouquet userbouquet.ED26.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
9 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.radio
225 entries in Bouquet userbouquet.ED00.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/local/share/enigma2/graphlcd/fonts/nokian.ttf...OK (Nokian)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/enigma2/Elgato-HD/num.ttf...OK (Num)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/local/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setInverted
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating keymap: Dreambox Keyboard Deutsch
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating language German
language set to de_DE
[CleanupWizard] freeSpaceAvailable--> 1720388
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
setMode - port: HDMI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
updateColor: HDMI
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
--> applying pep values
couldn't apply pep values.
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
Plugins
[AutoMount.py] Failed to create /media/net/Fritz7390 Error: [Errno 2] No such file or directory: '/media/net/Fritz7390'
[AutoMount.py] CheckMountPointFinished None None
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[eSocketMMIHandler] created successfully
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
/usr/lib/python2.6/site-packages/twisted/spread/pb.py:30: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x1823a04>}
starting hotplug handler
add device sda to bdpoll current state: medium inserted
It's now Sat Jan 1 01:00:52 2000
[timer.py] next activation: 946684952 (in 99684 ms)
It's now Sat Jan 1 01:00:52 2000
[timer.py] next activation: 946684952 (in 99665 ms)
Looking for embedded skin
allocating new converter!
Looking for embedded skin
Looking for embedded skin
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
setValue 90
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/%s/
resolve: -> /usr/local/share/enigma2/%s/
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
reused converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
reused converter!
reused converter!
reused converter!
reused converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/graphlcd/%s/
resolve: -> /usr/local/share/enigma2/graphlcd/%s/
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing 1:0:19:EF10:421:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0421:0001
opening frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[eDVBCAService] new channel 0x135bc58!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1082 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] invalidate current switch params
[SEC] setVoltage 2
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[SEC] sleep 10ms
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
poll: unhandled POLLERR/HUP/NVAL for fd 30(17)
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 100]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 100], 'up': True, 'mac': '00:00:0f:03:35:38', 'dhcp': False, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x135bc58 running
[eDVBLocalTimerHandler] channel 0x135bc58 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x135bc58 running
stop release channel timer
no version filtering
0012: 4e ef 10 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
allocate demux
disable teletext subtitles
decoder state: play, vpid=255, apid=259
DMX_SET_PES_FILTER(0xff) - pcr - ok
DMX_SET_PES_FILTER(0x103) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0xff) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
[__evUpdatedInfo]
[writeChannelName]
vfd display text: RTL HD
[showCrypted]
[showDolby]
[showMp3]
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
+ 1/1 TID 00
done!
PATready
use pmtpid 0060 for service_id ef10
no version filtering
0060: 02 ef 10 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 33 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
+- 1/2 TID 4e
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
decoder state: play, vpid=255, apid=259
[__evUpdatedInfo]
[writeChannelName]
vfd display text: RTL HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 370 bytes
9f 80 32 82 01 6c 03 ef 10 19 01 52 01 81 08 00 c0 00 00 04 21 00 01 82 02 01 00 84 02 00 60 09 7f 18 30 fc cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 69 00 00 3d a3 0d 01 80 11 80 00 02 18 30 01 0f 9f 20 ff aa 15 02 80 11 00 00 00 64 00 03 03 21 00 00 00 02 18 30 00 00 00 64 aa 15 02 80 11 00 00 0b ea 00 03 03 21 00 00 00 02 18 30 00 00 0b ea 01 00 26 a3 0d 01 80 11 80 00 02 18 30 01 0d ab 20 ff aa 15 02 80 11 00 00 0b b8 00 03 03 21 00 00 00 02 18 43 00 00 0b b8 09 5c 18 43 f9 cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 43 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 66 00 03 03 21 00 00 02 18 43 5d 00 00 66 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 43 5d 00 0b ea 00 09 04 09 c4 fb cc 09 04 09 8c fa cc 09 04 06 48 ff cc 09 4c 18 60 fe cc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 60 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 68 00 03 03 21 00 00 02 18 60 5d 00 00 68 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 60 5d 00 0b ea 00 06 00 20 00 00 1b 00 ff 00 00 06 01 03 00 00 05 01 05 00 00
doing version filtering
0060: 02 ef 10 19 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 00:15:43
[eDVBLocalTimerHandler] m_time_difference is 403827287
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
[EPGC] 3748 events read from /media/hdd/epg.dat
++ 2/2 TID 4e
done!
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 705170 bytes for cache used
[EPGC] next update in 2 sec
[__evUpdatedEventInfo]
doing version filtering
0012: 4e ef 10 15 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
[EPGC] start caching events(1350512146)
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1350512153)
[EPGC] schedule finished(1350512156)
[EPGC] stop caching events(1350512156)
[EPGC] next update in 60 min
no ancillary data in audio stream... abort radiotext pes parser

Und jetzt die neue Version. bis zum Neustart über das Menü hatte ich mit geladener und gestarteter Oscam ein Bild. Jetzt habe ich null Signalstärke in der Infoleiste.

Spoiler

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.10.18 00:27:48 =~=~=~=~=~=~=~=~=~=~=~=


Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3  2  1  0
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
WAIT 3 min
Seems to be the first run - Making devices in /dev...
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Lade Filesystem Treiber ext3 ext4 ...
Fertig
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp /var/run.
Hostname: ArgusVIP.
starting telnetd
init stmfb
LOADING MODULES
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 660
seeking to a1a0
seeking to 12740
seeking to 15ce00
seeking to 15ce38
seeking to 15ce70
seeking to 1a0060
seeking to 1a0068
seeking to 1a0070
seeking to 1a0100
seeking to 1bc920
seeking to 1bea00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
AVS Aktiviert -- Kein Tuner gesetzt -- Default
init player 191
init frontends
Tuner Aktiviert -- Default ST-Tuner
init drivers
np-PTI Laden...
Swap Laden ...
Kartenslots Aktivieren ...
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/bootlogo.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 25, Duration = 429 (17)
StartMp4: Track 0 type = 'vide'
StartMp4: 'mdhd' Track 1, TimeScale = 48000, Duration = 819200 (17)
StartMp4: Track 1 type = 'soun'
BuildTrackMap: MOV track type 'vide': 429 chunks, 429 samples
BuildTrackMap: TimeScale 25, Delta 1
BuildTrackMap: MOV track type 'soun': 800 chunks, 800 samples
BuildTrackMap: TimeScale 48000, Delta 1024
*** Composition Data not present.
Mounting local filesystems...
ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
Hostname: ArgusVIP.
starting telnetd
Starting FTP server: vsftpd.
Deconfiguring network interfaces... ifdown: interface lo not configured
ifdown: interface eth0 not configured
done.
Starting dhcp
Starting DHCP client: udhcpcudhcpc (v1.19.3) started
Sending discover...
Sending select for 192.168.1.156...
Lease of 192.168.1.156 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... mknod: /dev/rc: File exists
Model: hl101
vBoxType: 5
Input device name: "Spider HL101 frontpanel buttons"
Input device name: "TDT RC event driver"
Selected Remote: Hl101 RemoteControl
RemoteControl Map:
STANDBY - 01 - 116
MUTE - 04 - 113
V.FORMAT - 02 - 47
- - 390
0BUTTON - 12 - 11
1BUTTON - 09 - 2
2BUTTON - 0a - 3
3BUTTON - 0b - 4
4BUTTON - 0c - 5
5BUTTON - 0d - 6
6BUTTON - 0e - 7
7BUTTON - 0f - 8
8BUTTON - 10 - 9
9BUTTON - 11 - 10
BACK - 14 - 158
INFO - 1a - 358
- - 392
DOWN/P- - 20 - 108
UP/P+ - 1f - 103
RIGHT/V+ - 21 - 106
LEFT/V- - 22 - 105
v+ - 1b - 115
v- - 1c - 114
p+ - 1d - 103
p- - 1e - 108
OK/LIST - 23 - 352
MENU - 17 - 139
GUIDE - 25 - 365
EXIT - 24 - 102
FAV - 19 - 364
RED - 32 - 398
GREEN - 33 - 399
YELLOW - 34 - 400
BLUE - 35 - 401
REWIND - 2c - 168
PAUSE - 28 - 119
PLAY - 29 - 207
FASTFORWARD - 2d - 208
RECORD - 16 - 167
STOP - 27 - 128
SLOWMOTION - 30 - 409
ARCHIVE - 26 - 361
SAT - 18 - 381
STEPBACK - 2a - 412
STEPFORWARD - 2b - 407
MARK - 25 - 365
TV/RADIO - 13 - 378
USB - 31 - 206
TIMER - 03 - 359
Supports Long KeyPress: 0
killall: showiframe: no process killed
udhcpc (v1.19.3) started
Sending discover...
Sending select for 192.168.1.156...
Lease of 192.168.1.156 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
done.
showSinglePic /boot/first/neu.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)
[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2

[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
Z)hV)Ä^¨{`@
showSinglePic /boot/first/danke.mvi
VIDEO_SELECT_SOURCE MEMORY (Success)
VIDEO_PLAY (Success)
VIDEO_CONTINUE: (Success)
VIDEO_CLEAR_BUFFER: (Invalid argument)

INIT: Switching to runlevel: 6


INIT: Sending processes the TERM signal

Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3  2  1  0
(Re)start USB...
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
2 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Lade Filesystem Treiber ext3 ext4 ...
Fertig
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp.
Hostname: ArgusVIP.
starting telnetd
init stmfb
LOADING MODULES
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 660
seeking to a1a0
seeking to 12740
seeking to 15ce00
seeking to 15ce38
seeking to 15ce70
seeking to 1a0060
seeking to 1a0068
seeking to 1a0070
seeking to 1a0100
seeking to 1bc920
seeking to 1bea00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
AVS Aktiviert -- Kein Tuner gesetzt -- Default
init player 191
init frontends
Tuner Aktiviert -- Default ST-Tuner
init drivers
np-PTI Laden...
Swap Laden ...
Kartenslots Aktivieren ...
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/bootlogo.mp4 - Audio Video
init lircd
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 25, Duration = 429 (17)
StartMp4: Track 0 type = 'vide'
StartMp4: 'mdhd' Track 1, TimeScale = 48000, Duration = 819200 (17)
StartMp4: Track 1 type = 'soun'
BuildTrackMap: MOV track type 'vide': 429 chunks, 429 samples
BuildTrackMap: TimeScale 25, Delta 1
BuildTrackMap: MOV track type 'soun': 800 chunks, 800 samples
BuildTrackMap: TimeScale 48000, Delta 1024
*** Composition Data not present.
lircd-0.8.2[706]: lircd(userspace) ready

ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
Fernbedienung NEU geladen
Model: hl101
vBoxType: 5
Input device name: "Spider HL101 frontpanel buttons"
Mounting local filesystems...
Input device name: "TDT RC event driver"
Selected Remote: Hl101 RemoteControl
RemoteControl Map:
STANDBY - 01 - 116
MUTE - 04 - 113
V.FORMAT - 02 - 47
- - 390
0BUTTON - 12 - 11
1BUTTON - 09 - 2
2BUTTON - 0a - 3
3BUTTON - 0b - 4
4BUTTON - 0c - 5
5BUTTON - 0d - 6
6BUTTON - 0e - 7
7BUTTON - 0f - 8
8BUTTON - 10 - 9
9BUTTON - 11 - 10
BACK - 14 - 158
INFO - 1a - 358
- - 392
DOWN/P- - 20 - 108
UP/P+ - 1f - 103
RIGHT/V+ - 21 - 106
LEFT/V- - 22 - 105
v+ - 1b - 115
v- - 1c - 114
p+ - 1d - 103
p- - 1e - 108
OK/LIST - 23 - 352
MENU - 17 - 139
GUIDE - 25 - 365
EXIT - 24 - 102
FAV - 19 - 364
RED - 32 - 398
GREEN - 33 - 399
YELLOW - 34 - 400
BLUE - 35 - 401
REWIND - 2c - 168
PAUSE - 28 - 119
PLAY - 29 - 207
FASTFORWARD - 2d - 208
RECORD - 16 - 167
STOP - 27 - 128
SLOWMOTION - 30 - 409
ARCHIVE - 26 - 361
SAT - 18 - 381
STEPBACK - 2a - 412
STEPFORWARD - 2b - 407
MARK - 25 - 365
TV/RADIO - 13 - 378
USB - 31 - 206
TIMER - 03 - 359
Supports Long KeyPress: 0
lircd-0.8.2[706]: accepted new client on /dev/lircd

Hostname: ArgusVIP.
starting telnetd
Starting FTP server: vsftpd.
Deconfiguring network interfaces... done.
Starting dhcp
Starting DHCP client: udhcpcudhcpc (v1.19.3) started
Sending discover...
Sending discover...
Sending select for 192.168.1.156...
Lease of 192.168.1.156 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
.
LOADING E2
starting e2->
Emu Autostart ...
Emu Autostart ... FERTIG
RAM Leeren ...
RAM Leeren ... FERTIG
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... Oscam startet...
Oscam ist gestartet
udhcpc (v1.19.3) started
Sending discover...
/usr/local/bin/enigma2: /usr/lib/libjpeg.so.8: no version information available (required by /usr/local/bin/enigma2)
Display Uhr nicht Aktiv ...
Sending select for 192.168.1.156...
Lease of 192.168.1.156 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
done.
Autonews inaktiv ...
Samba Menu einstellungen nicht Aktiv...OFF
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '${prefix}', 0)
setenv('bindir', '${exec_prefix}/bin', 0)
setenv('sbindir', '${exec_prefix}/sbin', 0)
setenv('libexecdir', '${exec_prefix}/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/local/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '${prefix}/com', 0)
setenv('localstatedir', '${prefix}/var', 0)
setenv('libdir', '${exec_prefix}/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/local/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/usr/com', 1)
setenv('localstatedir', '/usr/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/local/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5120)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error: No matching USB device found!
config -> (w 320, h 240)
lcd buffer 0x2aefe008 153600 bytes, stride 640
eDBoxLCD::eDBoxLCD (w 320, h 240, depth 16)<
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
eDVBCI_UI >
eDVBCI_UI <
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "Spider HL101 frontpanel buttons" is not a keyboard.
Input device "TDT RC event driver" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
deleteSessions >
deleteSessions <
CI Slot 1: reset requested
deleteSessions >
deleteSessions <
stat on /dev/dvb/adapter0/ci2 failed

CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 1539 services
scanning for frontends..
opening frontend 0
failed! (/dev/dvb/adapter0/frontend0) No such device
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
found 1 adapter, 0 frontends(0 sim) and 3 demux, boxtype 12
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/local/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
StopMp4:
Player: Terminating 1
CheckKey: Attempting to shut down
main thread is non-idle! display spinner!
End of file (1): Running time = 18 seconds
Linux DVB Test terminating
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/local/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/local/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/local/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/local/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1']
main thread is non-idle! display spinner!
[Harddisk] start automount
found block device 'sda1': error querying properties
found block device 'sdb': ok, removable=False, cdrom=False, partitions=['sdb1']
new Harddisk sdb -> /dev/sdb -> /dev/sdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
[Harddisk] start automount
found block device 'sdb1': error querying properties
found block device 'ramzswap0': ok, removable=False, cdrom=False, partitions=[]
couldn't read model: [Errno 2] No such file or directory: '/sys/devices/virtual/block/ramzswap0/device/model'
Preferred tag editor set to None
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/local/share/enigma2/unicable.xml
sec config cleared
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/local/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.bef001.tv
121 entries in Bouquet userbouquet.bef001.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
9 entries in Bouquet userbouquet.favourites.tv
2 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.neu.radio
7 entries in Bouquet userbouquet.neu.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/local/share/enigma2/graphlcd/fonts/nokian.ttf...OK (Nokian)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/enigma2/Elgato-HD/num.ttf...OK (Num)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/local/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setInverted
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating keymap: Dreambox Keyboard Deutsch
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating language German
language set to de_DE
[CleanupWizard] freeSpaceAvailable--> 1724716
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
setMode - port: HDMI mode: 720p rate: 60Hz
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
updateColor: HDMI
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
--> applying pep values
couldn't apply pep values.
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
Plugins
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[eSocketMMIHandler] created successfully
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
/usr/lib/python2.6/site-packages/twisted/spread/pb.py:30: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x11196bc>}
starting hotplug handler
add device sda to bdpoll current state: medium inserted
It's now Sat Jan 1 01:00:48 2000
[timer.py] next activation: 946684948 (in 99450 ms)
It's now Sat Jan 1 01:00:48 2000
[timer.py] next activation: 946684948 (in 99434 ms)
Looking for embedded skin
allocating new converter!
Looking for embedded skin
Looking for embedded skin
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
setValue 90
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/%s/
resolve: -> /usr/local/share/enigma2/%s/
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/graphlcd/%s/
resolve: -> /usr/local/share/enigma2/graphlcd/%s/
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing 1:0:19:EF76:3F9:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 03f9:0001
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(17)
poll: unhandled POLLERR/HUP/NVAL for fd 31(16)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 156], 'up': True, 'mac': '00:00:0f:03:35:38', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
Timeout!
lircd-0.8.2[706]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 17 -> menu lircd.conf_FB2

action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÞœ{`@
action -> OkCancelActions ok
okbuttonClick

[MyMenu] start

Looking for embedded skin
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÞœ{`@
action -> SetupActions ok
okbuttonClick
Looking for embedded skin
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÞœ{`@
action -> SetupActions ok
okbuttonClick
lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÞœ{`@
action -> MsgBoxActions ok
lircd-0.8.2[706]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2
hV)ÄÞœ{`@
action -> SetupActions cancel

[TUNER] cancel

lircd-0.8.2[706]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2
hV)ÄÞœ{`@
action -> SetupActions cancel

[MyMenu] cancel

lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÞœ{`@
action -> OkCancelActions ok
okbuttonClick
SleepTimerEdit SleepTimerEdit
Standby Standby
Standby TryQuitMainloop
Standby TryQuitMainloop
Standby TryQuitMainloop
allocating new converter!
allocating new converter!
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÞœ{`@
nr_read 32 nr_write 5
sum 37 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 600 False
lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[706]: not blocked fd =-1


lircd-0.8.2[706]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÞœ{`@
action -> OkCancelActions ok
okbuttonClick
Looking for embedded skin
stopService
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x11196bc>}
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- saving lame channel db
saved 94 channels and 1539 services!
release cached channel (timer timeout)
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
- (35) CI Slots
deleteSessions >
deleteSessions <
deleteSessions >
deleteSessions <
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (20) Socket MMI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (1) Background File Eraser
reached rl -1
e2 ended <- RTV: 2
2
REBOOT

INIT: Entering runlevel: 3


* * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* >> Willkommen by TeamCS Enigma2_GStreamer *
* *
* >> Dieses Image wurde erstellt von Ducktrick *
* *
* >>

Sie müssen registriert sein, um Links zu sehen.

*
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * *
login[837]: root login on 'ttyAS0'



BusyBox v1.19.3 (2012-01-31 23:46:56 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

ArgusVIP:~# killall: enigma2: no process killed
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/reboot.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 30, Duration = 287 (9)
StartMp4: Track 0 type = 'vide'
BuildTrackMap: MOV track type 'vide': 287 chunks, 287 samples
BuildTrackMap: TimeScale 30, Delta 1
ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
umount: can't forcibly umount /dev/sdc1: Invalid argument
killall: showiframe: no process killed

INIT: Switching to runlevel: 6


INIT: Sending processes the TERM sSending all processes the TERM signal...lircd-0.8.2[706]: caught signal

done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3  2  1  0
(Re)start USB...
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
2 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Segmentation fault
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Dual Tuner /devs Vorhanden, Tuner Ready ...
Lade Filesystem Treiber ext3 ext4 ...
Fertig
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp.
Hostname: ArgusVIP.
starting telnetd
init stmfb
LOADING MODULES
/etc/init.d/rcS: line 175: can't create /dev/vfd: No such device or address
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 660
seeking to a1a0
seeking to 12740
seeking to 15ce00
seeking to 15ce38
seeking to 15ce70
seeking to 1a0060
seeking to 1a0068
seeking to 1a0070
seeking to 1a0100
seeking to 1bc920
seeking to 1bea00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
AVS Aktiviert -- VIP2
init player 191
init frontends
Tuner Aktiviert -- Sharp und LG gesetzt
init drivers
np-PTI Laden...
Swap Laden ...
Kartenslots Aktivieren ...
init lircd
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/bootlogo.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 25, Duration = 429 (17)
StartMp4: Track 0 type = 'vide'
StartMp4: 'mdhd' Track 1, TimeScale = 48000, Duration = 819200 (17)
StartMp4: Track 1 type = 'soun'
BuildTrackMap: MOV track type 'vide': 429 chunks, 429 samples
BuildTrackMap: TimeScale 25, Delta 1
BuildTrackMap: MOV track type 'soun': 800 chunks, 800 samples
BuildTrackMap: TimeScale 48000, Delta 1024
*** Composition Data not present.
lircd-0.8.2[701]: lircd(userspace) ready

ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
Fernbedienung NEU geladen
Model: hl101
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Hl101 RemoteControl
RemoteControl Map:
STANDBY - 01 - 116
MUTE - 04 - 113
V.FORMAT - 02 - 47
- - 390
0BUTTON - 12 - 11
1BUTTON - 09 - 2
2BUTTON - 0a - 3
3BUTTON - 0b - 4
4BUTTON - 0c - 5
5BUTTON - 0d - 6
6BUTTON - 0e - 7
7BUTTON - 0f - 8
8BUTTON - 10 - 9
9BUTTON - 11 - 10
BACK - 14 - 158
INFO - 1a - 358
- - 392
DOWN/P- - 20 - 108
UP/P+ - 1f - 103
RIGHT/V+ - 21 - 106
LEFT/V- - 22 - 105
v+ - 1b - 115
v- - 1c - 114
p+ - 1d - 103
p- - 1e - 108
OK/LIST - 23 - 352
MENU - 17 - 139
GUIDE - 25 - 365
EXIT - 24 - 102
FAV - 19 - 364
RED - 32 - 398
GREEN - 33 - 399
YELLOW - 34 - 400
BLUE - 35 - 401
REWIND - 2c - 168
PAUSE - 28 - 119
PLAY - 29 - 207
FASTFORWARD - 2d - 208
RECORD - 16 - 167
STOP - 27 - 128
SLOWMOTION - 30 - 409
ARCHIVE - 26 - 361
SAT - 18 - 381
STEPBACK - 2a - 412
STEPFORWARD - 2b - 407
MARK - 25 - 365
TV/RADIO - 13 - 378
USB - 31 - 206
TIMER - 03 - 359
Supports Long KeyPress: 0
lircd-0.8.2[701]: accepted new client on /dev/lircd

Mounting local filesystems...
Hostname: ArgusVIP.
starting telnetd
Starting FTP server: vsftpd.
Deconfiguring network interfaces... done.
Starting dhcp
Starting DHCP client: udhcpcudhcpc (v1.19.3) started
Sending discover...
Sending discover...
Sending select for 192.168.1.156...
Lease of 192.168.1.156 obtained, lease time 864000
route: SIOCDELRT: No such process
adding dns 192.168.1.1
.
/etc/init.d/rcS: line 555: can't create /dev/vfd: No such device or address
LOADING E2
starting e2->
Setting up IP spoofing protection: rp_filter.
Emu Autostart ...
Emu Autostart ... FERTIG
RAM Leeren ...
RAM Leeren ... FERTIG
Configuring network interfaces... Oscam startet...
Oscam ist gestartet
udhcpc (v1.19.3) started
Sending discover...
/usr/local/bin/enigma2: /usr/lib/libjpeg.so.8: no version information available (required by /usr/local/bin/enigma2)
Sending select for 192.168.1.156...
Lease of 192.168.1.156 obtained, lease time 864000
Display Uhr nicht Aktiv ...
route: SIOCDELRT: No such process
adding dns 192.168.1.1
done.
Autonews inaktiv ...
Samba Menu einstellungen nicht Aktiv...OFF
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '${prefix}', 0)
setenv('bindir', '${exec_prefix}/bin', 0)
setenv('sbindir', '${exec_prefix}/sbin', 0)
setenv('libexecdir', '${exec_prefix}/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/local/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '${prefix}/com', 0)
setenv('localstatedir', '${prefix}/var', 0)
setenv('libdir', '${exec_prefix}/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/local/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/usr/com', 1)
setenv('localstatedir', '/usr/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/local/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5120)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error: No matching USB device found!
config -> (w 320, h 240)
lcd buffer 0x2aefe008 153600 bytes, stride 640
eDBoxLCD::eDBoxLCD (w 320, h 240, depth 16)<
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
eDVBCI_UI >
eDVBCI_UI <
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is not a keyboard.
failed to open /dev/input/event1
Input device "" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
deleteSessions >
deleteSessions <
CI Slot 1: reset requested
deleteSessions >
deleteSessions <
stat on /dev/dvb/adapter0/ci2 failed

CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 1539 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
found 1 adapter, 1 frontends(1 sim) and 3 demux, boxtype 12
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/local/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
main thread is non-idle! display spinner!
StopMp4:
Player: Terminating 1
CheckKey: Attempting to shut down
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/local/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/local/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/local/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/local/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
End of file (1): Running time = 18 seconds
Linux DVB Test terminating
main thread is non-idle! display spinner!
couldn't open fp
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1']
[Harddisk] start automount
found block device 'sda1': error querying properties
found block device 'sdb': ok, removable=False, cdrom=False, partitions=['sdb1']
new Harddisk sdb -> /dev/sdb -> /dev/sdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
[Harddisk] start automount
found block device 'sdb1': error querying properties
found block device 'ramzswap0': ok, removable=False, cdrom=False, partitions=[]
couldn't read model: [Errno 2] No such file or directory: '/sys/devices/virtual/block/ramzswap0/device/model'
Preferred tag editor set to None
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/local/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled No, DVB-S2 Yes
slot: 0 configmode: nothing
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/local/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.bef001.tv
121 entries in Bouquet userbouquet.bef001.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
9 entries in Bouquet userbouquet.favourites.tv
2 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.neu.radio
7 entries in Bouquet userbouquet.neu.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/local/share/enigma2/graphlcd/fonts/nokian.ttf...OK (Nokian)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/enigma2/Elgato-HD/num.ttf...OK (Num)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/local/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setInverted
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating keymap: Dreambox Keyboard Deutsch
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating language German
language set to de_DE
[CleanupWizard] freeSpaceAvailable--> 1724700
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
setMode - port: HDMI mode: 720p rate: 60Hz
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
updateColor: HDMI
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
--> applying pep values
couldn't apply pep values.
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
Plugins
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[eSocketMMIHandler] created successfully
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
/usr/lib/python2.6/site-packages/twisted/spread/pb.py:30: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x115295c>}
starting hotplug handler
add device sda to bdpoll current state: medium inserted
It's now Sat Jan 1 01:00:49 2000
[timer.py] next activation: 946684949 (in 99501 ms)
It's now Sat Jan 1 01:00:49 2000
[timer.py] next activation: 946684949 (in 99490 ms)
Looking for embedded skin
allocating new converter!
Looking for embedded skin
Looking for embedded skin
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
setValue 90
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/%s/
resolve: -> /usr/local/share/enigma2/%s/
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/graphlcd/%s/
resolve: -> /usr/local/share/enigma2/graphlcd/%s/
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing 1:0:19:EF76:3F9:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 03f9:0001
allocate Channel: res -7
DVB service failed to tune - error 10
RemovePopup, id = ZapError
AddPopup, id = ZapError
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
poll: unhandled POLLERR/HUP/NVAL for fd 29(17)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 156], 'up': True, 'mac': '00:00:0f:03:35:38', 'dhcp': True, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
Timeout!
lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 17 -> menu lircd.conf_FB2

action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
Z)hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
Z)hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
Z)hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
Ci CiSelection
ParentalControlSetup ParentalControlSetup
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
Z)hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup DefaultSatLists
ScanSetup ScanSimple
ScanSetup ScanSetup
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
Z)hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
Z)hV)ľ‡{`@
action -> OkCancelActions ok
stopService
Creating setup
lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 21 -> right lircd.conf_FB2
hV)ľ‡{`@
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
Creating setup
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000022 00 left lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000022 00 left lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 22 -> left lircd.conf_FB2

hV)ľ‡{`@
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
Creating setup
lircd-0.8.2[701]: write_socket: 5, 0000000000000022 00 left lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000022 00 left lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 22 -> left lircd.conf_FB2

hV)ľ‡{`@
action -> SetupActions left
unknown action SetupActions/left! typo in keymap?
action -> SetupActions left
Creating setup
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> SetupActions ok
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> MsgBoxActions ok
playing 1:0:19:EF76:3F9:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 03f9:0001
opening frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[eDVBCAService] new channel 0x194d2e0!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1714 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF76:3F9:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] invalidate current switch params
[SEC] setVoltage 2
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x194d2e0 running
[eDVBLocalTimerHandler] channel 0x194d2e0 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x194d2e0 running
stop release channel timer
no version filtering
0012: 4e ef 76 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (02ff), and 1 audio stream(s) (0303), and the pcr pid is 02ff, and the text pid is 0022
allocate demux
disable teletext subtitles
decoder state: play, vpid=767, apid=771
DMX_SET_PES_FILTER(0x2ff) - pcr - ok
DMX_SET_PES_FILTER(0x303) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x2ff) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x22) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
[__evUpdatedInfo]
[writeChannelName]
vfd display text: kabel eins HD
[showCrypted]
[showDolby]
[showMp3]
-+ 1/2 TID 4e
+ 1/1 TID 00
done!
PATready
use pmtpid 0062 for service_id ef76
no version filtering
0062: 02 ef 76 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 2d 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (02ff), and 1 audio stream(s) (0303), and the pcr pid is 02ff, and the text pid is 0022
decoder state: play, vpid=767, apid=771
[__evUpdatedInfo]
[writeChannelName]
vfd display text: kabel eins HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:EF76:3F9:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF76:3F9:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 364 bytes
9f 80 32 82 01 66 03 ef 76 1b 01 4c 01 81 08 00 c0 00 00 03 f9 00 01 82 02 01 00 84 02 00 62 09 7f 18 30 fc ee 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 69 00 00 3d a3 0d 01 80 11 80 00 02 18 30 01 0f 9f 20 ff aa 15 02 80 11 00 00 00 64 00 03 03 21 00 00 00 02 18 30 00 00 00 64 aa 15 02 80 11 00 00 0b ea 00 03 03 21 00 00 00 02 18 30 00 00 0b ea 01 00 26 a3 0d 01 80 11 80 00 02 18 30 01 0d ab 20 ff aa 15 02 80 11 00 00 0b b8 00 03 03 21 00 00 00 02 18 43 00 00 0b b8 09 5c 18 43 f9 ee 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 43 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 66 00 03 03 21 00 00 02 18 43 5d 00 00 66 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 43 5d 00 0b ea 00 09 04 09 c4 fb ee 09 04 09 8c fa ee 09 4c 18 60 fe ee 8c 46 00 00 43 8c 13 00 80 11 08 02 18 60 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 68 00 03 03 21 00 00 02 18 60 5d 00 00 68 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 60 5d 00 0b ea 00 06 00 22 00 00 1b 02 ff 00 00 06 03 03 00 00 05 03 05 00 00
doing version filtering
0062: 02 ef 76 1b 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
++ 2/2 TID 4e
done!
[__evUpdatedEventInfo]
doing version filtering
0012: 4e ef 76 39 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 00:34:58
[eDVBLocalTimerHandler] m_time_difference is 403828423
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
[EPGC] 3745 events read from /media/hdd/epg.dat
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 704436 bytes for cache used
[EPGC] next update in 2 sec
[EPGC] start caching events(1350513301)
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1350513308)
no ancillary data in audio stream... abort radiotext pes parser
[EPGC] schedule finished(1350513318)
[EPGC] stop caching events(1350513318)
[EPGC] next update in 60 min
nr_read 48 nr_write 5
sum 53 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 600 False
lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 17 -> menu lircd.conf_FB2

hV)ľ‡{`@
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
Ci CiSelection
ParentalControlSetup ParentalControlSetup
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
LanguageSelection LanguageSelection
NetworkSetup NetworkAdapterSelection
InputDeviceSetup InputDeviceSelection
RecordPaths RecordPathsSettings
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
allocating new converter!
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to recover lost mounts (in background)
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to recover lost mounts (in background)
[ePopen] command: ethtool eth0
child has terminated
pipes closed
[ePopen] command: ping -c 1 82.149.226.170
[ePopen] command: ping -c 1 193.99.144.85
[ePopen] command: ping -c 1 209.85.135.103
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
poll: unhandled POLLERR/HUP/NVAL for fd 54(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> WizardActions ok
[iStatus] killing self.WlanConsole
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 21 -> right lircd.conf_FB2
hV)ľ‡{`@
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 21 -> right lircd.conf_FB2
hV)ľ‡{`@
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 21 -> right lircd.conf_FB2
hV)ľ‡{`@
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000021 00 right lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 21 -> right lircd.conf_FB2
hV)ľ‡{`@
action -> SetupActions right
unknown action SetupActions/right! typo in keymap?
action -> SetupActions right
lircd-0.8.2[701]: write_socket: 5, 0000000000000009 00 1 lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000009 00 1 lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 09 -> 1 lircd.conf_FB2
FB2
hV)ľ‡{`@
action -> SetupActions 1
unknown action SetupActions/1! typo in keymap?
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
lircd-0.8.2[701]: write_socket: 5, 0000000000000012 00 0 lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000012 00 0 lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 12 -> 0 lircd.conf_FB2
FB2
hV)ľ‡{`@
action -> SetupActions 0
unknown action SetupActions/0! typo in keymap?
lircd-0.8.2[701]: write_socket: 5, 0000000000000012 00 0 lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000012 00 0 lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 12 -> 0 lircd.conf_FB2
FB2
hV)ľ‡{`@
action -> SetupActions 0
unknown action SetupActions/0! typo in keymap?
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 745124 bytes for cache used
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
B2
hV)ľ‡{`@
action -> SetupActions ok
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
B2
hV)ľ‡{`@
action -> MsgBoxActions ok
setting for adapter eth0 attribute up to value True
setting for adapter eth0 attribute dhcp to value False
setting for adapter eth0 attribute ip to value [192, 168, 1, 100]
setting for adapter eth0 attribute netmask to value [255, 255, 255, 0]
setting for adapter eth0 attribute gateway to value [192, 168, 1, 1]
[ePopen] command: ifdown eth0
(192, 168, 1, 100)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=1, data:

[ePopen] command: ip addr flush dev eth0
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
[OpenWebif] stopped
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=0, data:

[ePopen] command: ifup eth0
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
child has terminated
pipes closed
[eBatch] retval=0, cmds left=0, data:

[ePopen] command: ip -o addr show dev eth0
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 100]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 100], 'up': True, 'mac': '00:00:0f:03:35:38', 'dhcp': False, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 50(16)
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
B2
hV)ľ‡{`@
action -> MsgBoxActions ok
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares...
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage your network shares...
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to recover lost mounts (in background)
[ePopen] command: ethtool eth0
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
child has terminated
pipes closed
[ePopen] command: ping -c 1 82.149.226.170
[ePopen] command: ping -c 1 193.99.144.85
[ePopen] command: ping -c 1 209.85.135.103
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
poll: unhandled POLLERR/HUP/NVAL for fd 54(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 51(16)
It's now Thu Oct 18 00:36:12 2012
[timer.py] next activation: 1350513472 (in 99988 ms)
It's now Thu Oct 18 00:36:12 2012
[timer.py] next activation: 1350513472 (in 99983 ms)
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
loaded 2362 services
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED25.tv
158 entries in Bouquet userbouquet.ED25.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.tv
134 entries in Bouquet userbouquet.ED00.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED01.tv
67 entries in Bouquet userbouquet.ED01.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED02.tv
14 entries in Bouquet userbouquet.ED02.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED03.tv
45 entries in Bouquet userbouquet.ED03.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED04.tv
20 entries in Bouquet userbouquet.ED04.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED23.tv
12 entries in Bouquet userbouquet.ED23.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED26.tv
118 entries in Bouquet userbouquet.ED26.tv
8 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.radio
225 entries in Bouquet userbouquet.ED00.radio
1 entries in Bouquet bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/userbouquet.favourites.tv
resolve: -> /etc/enigma2/userbouquet.favourites.tv
resolve: resolve ${sysconfdir}/enigma2/bouquets.tv
resolve: -> /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/userbouquet.favourites.radio
resolve: -> /etc/enigma2/userbouquet.favourites.radio
resolve: resolve ${sysconfdir}/enigma2/bouquets.radio
resolve: -> /etc/enigma2/bouquets.radio
[OpenWebif] page '/web/servicelistreload?mode=0' ok (cheetah template)
ERROR reading PES (fd=37) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 37(8)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> WizardActions back
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
nr_read 49 nr_write 10
sum 59 prev_sum 53
hdd was accessed since previous check!
[IDLE] 0 600 False
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> InfobarChannelSelection openServiceList
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
playing 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF76:3F9:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:EF76:3F9:1:C00000:0:0:0:
AUDIO_CONTINUE - ok
start release channel timer
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
[eDVBCAService] remove channel 0x194d2e0
[eDVBLocalTimerHandler] remove channel 0x194d2e0
[eEPGCache] remove channel 0x194d2e0
allocate channel.. 0421:0001
[eDVBCAService] new channel 0x194d2e0!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1082 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x194d2e0 running
[eDVBLocalTimerHandler] channel 0x194d2e0 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x194d2e0 running
[EPGC] next update in 2 sec
stop release channel timer
no version filtering
0012: 4e ef 10 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
allocate demux
disable teletext subtitles
decoder state: play, vpid=255, apid=259
DMX_SET_PES_FILTER(0xff) - pcr - ok
DMX_SET_PES_FILTER(0x103) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0xff) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
[__evUpdatedInfo]
[writeChannelName]
vfd display text: RTL HD
[showCrypted]
[showDolby]
[showMp3]
+ 1/1 TID 00
done!
PATready
use pmtpid 0060 for service_id ef10
no version filtering
0060: 02 ef 10 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 33 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
-+ 1/2 TID 4e
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
decoder state: play, vpid=255, apid=259
[__evUpdatedInfo]
[writeChannelName]
vfd display text: RTL HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 370 bytes
9f 80 32 82 01 6c 03 ef 10 19 01 52 01 81 08 00 c0 00 00 04 21 00 01 82 02 01 00 84 02 00 60 09 7f 18 30 fc cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 69 00 00 3d a3 0d 01 80 11 80 00 02 18 30 01 0f 9f 20 ff aa 15 02 80 11 00 00 00 64 00 03 03 21 00 00 00 02 18 30 00 00 00 64 aa 15 02 80 11 00 00 0b ea 00 03 03 21 00 00 00 02 18 30 00 00 0b ea 01 00 26 a3 0d 01 80 11 80 00 02 18 30 01 0d ab 20 ff aa 15 02 80 11 00 00 0b b8 00 03 03 21 00 00 00 02 18 43 00 00 0b b8 09 5c 18 43 f9 cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 43 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 66 00 03 03 21 00 00 02 18 43 5d 00 00 66 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 43 5d 00 0b ea 00 09 04 09 c4 fb cc 09 04 09 8c fa cc 09 04 06 48 ff cc 09 4c 18 60 fe cc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 60 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 68 00 03 03 21 00 00 02 18 60 5d 00 00 68 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 60 5d 00 0b ea 00 06 00 20 00 00 1b 00 ff 00 00 06 01 03 00 00 05 01 05 00 00
doing version filtering
0060: 02 ef 10 19 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
++ 2/2 TID 4e
done!
[__evUpdatedEventInfo]
doing version filtering
0012: 4e ef 10 1d 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
[EPGC] start caching events(1350513393)
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 00:36:33
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 745124 bytes for cache used
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1350513399)
[EPGC] schedule finished(1350513402)
[EPGC] stop caching events(1350513402)
[EPGC] next update in 60 min
login[1422]: root login on 'pts/0'

no ancillary data in audio stream... abort radiotext pes parser
nr_read 49 nr_write 10
sum 59 prev_sum 59
hdd IDLE!
[IDLE] 59.0038068295 600 False
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 745124 bytes for cache used
It's now Thu Oct 18 00:37:51 2012
[timer.py] next activation: 1350513571 (in 99989 ms)
It's now Thu Oct 18 00:37:51 2012
[timer.py] next activation: 1350513571 (in 99983 ms)
nr_read 49 nr_write 10
sum 59 prev_sum 59
hdd IDLE!
[IDLE] 119.010004997 600 False
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 745124 bytes for cache used
lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 17 -> menu lircd.conf_FB2

hV)ľ‡{`@
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick

[MyMenu] start

Looking for embedded skin
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> SetupActions ok
okbuttonClick
Looking for embedded skin
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> SetupActions ok
okbuttonClick
Console: executing in run 0 the command: /var/config/emu/stop-emu.sh
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 52(16)
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> WizardActions ok
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> SetupActions ok
okbuttonClick
Console: executing in run 0 the command: /var/config/emu/start-oscam.sh
child has terminated
pipes closed
[eDVBCAService] send 370 bytes
9f 80 32 82 01 6c 03 ef 10 19 01 52 01 81 08 00 c0 00 00 04 21 00 01 82 02 01 00 84 02 00 60 09 7f 18 30 fc cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 69 00 00 3d a3 0d 01 80 11 80 00 02 18 30 01 0f 9f 20 ff aa 15 02 80 11 00 00 00 64 00 03 03 21 00 00 00 02 18 30 00 00 00 64 aa 15 02 80 11 00 00 0b ea 00 03 03 21 00 00 00 02 18 30 00 00 0b ea 01 00 26 a3 0d 01 80 11 80 00 02 18 30 01 0d ab 20 ff aa 15 02 80 11 00 00 0b b8 00 03 03 21 00 00 00 02 18 43 00 00 0b b8 09 5c 18 43 f9 cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 43 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 66 00 03 03 21 00 00 02 18 43 5d 00 00 66 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 43 5d 00 0b ea 00 09 04 09 c4 fb cc 09 04 09 8c fa cc 09 04 06 48 ff cc 09 4c 18 60 fe cc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 60 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 68 00 03 03 21 00 00 02 18 60 5d 00 00 68 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 60 5d 00 0b ea 00 06 00 20 00 00 1b 00 ff 00 00 06 01 03 00 00 05 01 05 00 00
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> WizardActions back
lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> SetupActions cancel

[EMU] cancel

lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> SetupActions cancel

[MyMenu] cancel

lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000024 00 exit lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 24 -> exit lircd.conf_FB2

hV)ľ‡{`@
action -> OkCancelActions cancel
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2

hV)ľ‡{`@
action -> InfobarChannelSelection zapDown
playing 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:EF10:421:1:C00000:0:0:0:
AUDIO_CONTINUE - ok
start release channel timer
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
[eDVBCAService] remove channel 0x194d2e0
[eDVBLocalTimerHandler] remove channel 0x194d2e0
[eEPGCache] remove channel 0x194d2e0
allocate channel.. 03f9:0001
[eDVBCAService] new channel 0x194d2e0!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1714 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x194d2e0 running
[eDVBLocalTimerHandler] channel 0x194d2e0 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x194d2e0 running
[EPGC] next update in 56 min
stop release channel timer
no version filtering
0012: 4e ef 75 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
allocate demux
disable teletext subtitles
decoder state: play, vpid=511, apid=515
DMX_SET_PES_FILTER(0x1ff) - pcr - ok
DMX_SET_PES_FILTER(0x203) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1ff) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x21) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
[__evUpdatedInfo]
[writeChannelName]
vfd display text: ProSieben HD
[showCrypted]
[showDolby]
[showMp3]
+- 1/2 TID 4e
+ 1/1 TID 00
done!
PATready
use pmtpid 0061 for service_id ef75
no version filtering
0061: 02 ef 75 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 2d 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 00:39:11
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] start cleanloop
[EPGC] stop cleanloop
[EPGC] 745124 bytes for cache used
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
decoder state: play, vpid=511, apid=515
[__evUpdatedInfo]
[writeChannelName]
vfd display text: ProSieben HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 364 bytes
9f 80 32 82 01 66 03 ef 75 0f 01 4c 01 81 08 00 c0 00 00 03 f9 00 01 82 02 01 00 84 02 00 61 09 7f 18 30 fc ec 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 69 00 00 3d a3 0d 01 80 11 80 00 02 18 30 01 0f 9f 20 ff aa 15 02 80 11 00 00 00 64 00 03 03 21 00 00 00 02 18 30 00 00 00 64 aa 15 02 80 11 00 00 0b ea 00 03 03 21 00 00 00 02 18 30 00 00 0b ea 01 00 26 a3 0d 01 80 11 80 00 02 18 30 01 0d ab 20 ff aa 15 02 80 11 00 00 0b b8 00 03 03 21 00 00 00 02 18 43 00 00 0b b8 09 5c 18 43 f9 ec 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 43 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 66 00 03 03 21 00 00 02 18 43 5d 00 00 66 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 43 5d 00 0b ea 00 09 04 09 c4 fb ec 09 04 09 8c fa ec 09 4c 18 60 fe ec 8c 46 00 00 43 8c 13 00 80 11 08 02 18 60 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 68 00 03 03 21 00 00 02 18 60 5d 00 00 68 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 60 5d 00 0b ea 00 06 00 21 00 00 1b 01 ff 00 00 06 02 03 00 00 05 02 05 00 00
doing version filtering
0061: 02 ef 75 0f 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
++ 2/2 TID 4e
done!
[__evUpdatedEventInfo]
doing version filtering
0012: 4e ef 75 35 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000017 00 menu lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 17 -> menu lircd.conf_FB2

hV)ľ‡{`@
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
SleepTimerEdit SleepTimerEdit
Standby Standby
Standby TryQuitMainloop
Standby TryQuitMainloop
Standby TryQuitMainloop
allocating new converter!
allocating new converter!
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2

hV)ľ‡{`@
lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[701]: not blocked fd =-1


lircd-0.8.2[701]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2

hV)ľ‡{`@
action -> OkCancelActions ok
okbuttonClick
Looking for embedded skin
stopService
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:EF75:3F9:1:C00000:0:0:0:
AUDIO_CONTINUE - ok
start release channel timer
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x115295c>}
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- saving lame channel db
saved 137 channels and 2369 services!
release cached channel (timer timeout)
[eDVBCAService] remove channel 0x194d2e0
[eDVBLocalTimerHandler] remove channel 0x194d2e0
[eEPGCache] remove channel 0x194d2e0
stop release channel timer
[EPGC] store epg to realpath '/media/sdb1/epg.dat'
[EPGC] 3843 events written to /media/hdd/epg.dat
thread joined 0
set RTC to previous valid time
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
- (35) CI Slots
deleteSessions >
deleteSessions <
deleteSessions >
deleteSessions <
- (30) eActionMap
- (21) input device driver
- (21) Console RC Driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (20) Socket MMI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (1) Background File Eraser
reached rl -1
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
e2 ended <- RTV: 2
2
REBOOT
/etc/init.d/rcS: line 609: can't create /dev/vfd: No such device or address
/var/config/shutdown/reboot.sh: line 2: can't create /dev/vfd: No such device or address

INIT: Entering runlevel: 3


* * * * * * * * * * * * * * * * * * * * * * * * * * *
* *
* >> Willkommen by TeamCS Enigma2_GStreamer *
* *
* >> Dieses Image wurde erstellt von Ducktrick *
* *
* >>

Sie müssen registriert sein, um Links zu sehen.

*
* *
* * * * * * * * * * * * * * * * * * * * * * * * * * *
login[1595]: root login on 'ttyAS0'



BusyBox v1.19.3 (2012-01-31 23:46:56 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

ArgusVIP:~# killall: enigma2: no process killed
/var/config/shutdown/reboot.sh: line 8: can't create /dev/vfd: No such device or address
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/reboot.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 30, Duration = 287 (9)
StartMp4: Track 0 type = 'vide'
BuildTrackMap: MOV track type 'vide': 287 chunks, 287 samples
BuildTrackMap: TimeScale 30, Delta 1
ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
umount: can't forcibly umount /dev/sdc1: Invalid argument
killall: showiframe: no process killed

INIT: Switching to
INIT: Sending processes the TERM sSending all processes the TERM signal...lircd-0.8.2[701]: caught signal

done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3  2  1  0
(Re)start USB...
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
2 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Segmentation fault
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Dual Tuner /devs Vorhanden, Tuner Ready ...
Lade Filesystem Treiber ext3 ext4 ...
Fertig
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp.
Hostname: ArgusVIP.
starting telnetd
init stmfb
LOADING MODULES
/etc/init.d/rcS: line 175: can't create /dev/vfd: No such device or address
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 660
seeking to a1a0
seeking to 12740
seeking to 15ce00
seeking to 15ce38
seeking to 15ce70
seeking to 1a0060
seeking to 1a0068
seeking to 1a0070
seeking to 1a0100
seeking to 1bc920
seeking to 1bea00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
AVS Aktiviert -- VIP2
init player 191
init frontends
Tuner Aktiviert -- Sharp und LG gesetzt
init drivers
np-PTI Laden...
Swap Laden ...
Kartenslots Aktivieren ...
init lircd
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/bootlogo.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 25, Duration = 429 (17)
StartMp4: Track 0 type = 'vide'
StartMp4: 'mdhd' Track 1, TimeScale = 48000, Duration = 819200 (17)
StartMp4: Track 1 type = 'soun'
BuildTrackMap: MOV track type 'vide': 429 chunks, 429 samples
BuildTrackMap: TimeScale 25, Delta 1
BuildTrackMap: MOV track type 'soun': 800 chunks, 800 samples
BuildTrackMap: TimeScale 48000, Delta 1024
*** Composition Data not present.
lircd-0.8.2[708]: lircd(userspace) ready

ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
Fernbedienung NEU geladen
Mounting local filesystems...
Model: hl101
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Hl101 RemoteControl
RemoteControl Map:
STANDBY - 01 - 116
MUTE - 04 - 113
V.FORMAT - 02 - 47
- - 390
0BUTTON - 12 - 11
1BUTTON - 09 - 2
2BUTTON - 0a - 3
3BUTTON - 0b - 4
4BUTTON - 0c - 5
5BUTTON - 0d - 6
6BUTTON - 0e - 7
7BUTTON - 0f - 8
8BUTTON - 10 - 9
9BUTTON - 11 - 10
BACK - 14 - 158
INFO - 1a - 358
- - 392
DOWN/P- - 20 - 108
UP/P+ - 1f - 103
RIGHT/V+ - 21 - 106
LEFT/V- - 22 - 105
v+ - 1b - 115
v- - 1c - 114
p+ - 1d - 103
p- - 1e - 108
OK/LIST - 23 - 352
MENU - 17 - 139
GUIDE - 25 - 365
EXIT - 24 - 102
FAV - 19 - 364
RED - 32 - 398
GREEN - 33 - 399
YELLOW - 34 - 400
BLUE - 35 - 401
REWIND - 2c - 168
PAUSE - 28 - 119
PLAY - 29 - 207
FASTFORWARD - 2d - 208
RECORD - 16 - 167
STOP - 27 - 128
SLOWMOTION - 30 - 409
ARCHIVE - 26 - 361
SAT - 18 - 381
STEPBACK - 2a - 412
STEPFORWARD - 2b - 407
MARK - 25 - 365
TV/RADIO - 13 - 378
USB - 31 - 206
TIMER - 03 - 359
Supports Long KeyPress: 0
lircd-0.8.2[708]: accepted new client on /dev/lircd

Hostname: ArgusVIP.
starting telnetd
Starting FTP server: vsftpd.
Deconfiguring network interfaces... done.
/etc/init.d/rcS: line 555: can't create /dev/vfd: No such device or address
LOADING E2
starting e2->
Setting up IP spoofing protection: rp_filter.
Emu Autostart ...
Emu Autostart ... FERTIG
RAM Leeren ...
RAM Leeren ... FERTIG
Configuring network interfaces... Oscam startet...
Oscam ist gestartet
/usr/local/bin/enigma2: /usr/lib/libjpeg.so.8: no version information available (required by /usr/local/bin/enigma2)
done.
Display Uhr nicht Aktiv ...
Autonews inaktiv ...
Samba Menu einstellungen nicht Aktiv...OFF
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '${prefix}', 0)
setenv('bindir', '${exec_prefix}/bin', 0)
setenv('sbindir', '${exec_prefix}/sbin', 0)
setenv('libexecdir', '${exec_prefix}/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/local/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '${prefix}/com', 0)
setenv('localstatedir', '${prefix}/var', 0)
setenv('libdir', '${exec_prefix}/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/local/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/usr/com', 1)
setenv('localstatedir', '/usr/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/local/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5120)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error: No matching USB device found!
config -> (w 320, h 240)
lcd buffer 0x2aefe008 153600 bytes, stride 640
eDBoxLCD::eDBoxLCD (w 320, h 240, depth 16)<
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
eDVBCI_UI >
eDVBCI_UI <
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is not a keyboard.
failed to open /dev/input/event1
Input device "" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
deleteSessions >
deleteSessions <
CI Slot 1: reset requested
deleteSessions >
deleteSessions <
stat on /dev/dvb/adapter0/ci2 failed

CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
main thread is non-idle! display spinner!
no spinner DC!
loaded 2369 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
found 1 adapter, 1 frontends(1 sim) and 3 demux, boxtype 12
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/local/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/local/share/fonts/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/local/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/local/share/enigma2/dealer
main thread is non-idle! display spinner!
resolve: resolve ${datadir}/meta
resolve: -> /usr/local/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
main thread is non-idle! display spinner!
couldn't open fp
StopMp4:
Player: Terminating 1
CheckKey: Attempting to shut down
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
End of file (1): Running time = 17 seconds
Linux DVB Test terminating
found block device 'mtdblock4': blacklisted
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1']
[Harddisk] start automount
found block device 'sda1': error querying properties
found block device 'sdb': ok, removable=False, cdrom=False, partitions=['sdb1']
new Harddisk sdb -> /dev/sdb -> /dev/sdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
[Harddisk] start automount
found block device 'sdb1': error querying properties
found block device 'ramzswap0': ok, removable=False, cdrom=False, partitions=[]
couldn't read model: [Errno 2] No such file or directory: '/sys/devices/virtual/block/ramzswap0/device/model'
Preferred tag editor set to None
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/local/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/local/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED25.tv
158 entries in Bouquet userbouquet.ED25.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.tv
134 entries in Bouquet userbouquet.ED00.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED01.tv
67 entries in Bouquet userbouquet.ED01.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED02.tv
14 entries in Bouquet userbouquet.ED02.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED03.tv
45 entries in Bouquet userbouquet.ED03.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED04.tv
20 entries in Bouquet userbouquet.ED04.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED23.tv
12 entries in Bouquet userbouquet.ED23.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED26.tv
118 entries in Bouquet userbouquet.ED26.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
9 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.radio
225 entries in Bouquet userbouquet.ED00.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/local/share/enigma2/graphlcd/fonts/nokian.ttf...OK (Nokian)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/enigma2/Elgato-HD/num.ttf...OK (Num)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/local/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setInverted
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating keymap: Dreambox Keyboard Deutsch
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating language German
language set to de_DE
[CleanupWizard] freeSpaceAvailable--> 1720564
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
setMode - port: HDMI mode: 720p rate: 60Hz
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
updateColor: HDMI
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
--> applying pep values
couldn't apply pep values.
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
Plugins
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[eSocketMMIHandler] created successfully
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
/usr/lib/python2.6/site-packages/twisted/spread/pb.py:30: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x182080c>}
starting hotplug handler
add device sda to bdpoll current state: medium inserted
It's now Sat Jan 1 01:00:50 2000
[timer.py] next activation: 946684950 (in 99249 ms)
It's now Sat Jan 1 01:00:50 2000
[timer.py] next activation: 946684950 (in 99232 ms)
Looking for embedded skin
allocating new converter!
Looking for embedded skin
Looking for embedded skin
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
setValue 90
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/%s/
resolve: -> /usr/local/share/enigma2/%s/
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/graphlcd/%s/
resolve: -> /usr/local/share/enigma2/graphlcd/%s/
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing -1:0:0:0:0:0:0:0:0:0:
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
poll: unhandled POLLERR/HUP/NVAL for fd 29(17)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 100]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 100], 'up': True, 'mac': '00:00:0f:03:35:38', 'dhcp': False, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
lircd-0.8.2[708]: write_socket: 5, 000000000000001a 00 info lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001a 00 info lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1a -> info lircd.conf_FB2

action -> InfobarShowHideActions toggleShow
self.STATE_HIDDEN
nr_read 30 nr_write 5
sum 35 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 600 False
It's now Sat Jan 1 01:02:30 2000
[timer.py] next activation: 946685050 (in 99993 ms)
It's now Sat Jan 1 01:02:30 2000
[timer.py] next activation: 946685050 (in 99989 ms)
nr_read 30 nr_write 5
sum 35 prev_sum 35
hdd IDLE!
[IDLE] 59.9999600649 600 False
nr_read 30 nr_write 5
sum 35 prev_sum 35
hdd IDLE!
[IDLE] 119.999973059 600 False
It's now Sat Jan 1 01:04:10 2000
[timer.py] next activation: 946685150 (in 99993 ms)
It's now Sat Jan 1 01:04:10 2000
[timer.py] next activation: 946685150 (in 99988 ms)

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

Interessant da das ja die version ist in der die Aufnahme bzw die Play Funktion probleme macht , allerdings ist dort der Selbe Kernel verwendet wie beim der Aktuellen Version , kann also nicht daran liegen sonnst würde das ja bei der jetzt Funktionierenden bei dir nicht gehen, naja ich warte mal auf das Log vom aktuellen release

 

[tamabi]

Ich habe meinen letzten Beitrag editiert ;-)

ÄHM ja, ich traue mir es nicht zu sagen, aber es läuft, das ist doch die neueste Version, oder habe ich jetzt auf beiden Sticks die selbe (alte) Version? Wenn das hier die letzte Vesion ist dann verate ich Dir was ich geändert habe.

Spoiler

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.10.18 00:53:46 =~=~=~=~=~=~=~=~=~=~=~=


Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3 2 1 0
(Re)start USB...
USB: scanning bus for devices... 3 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Segmentation fault
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Dual Tuner /devs Vorhanden, Tuner Ready ...
/etc/init.d/rcS: line 131: can't create /dev/vfd: No such device or address
e2fsck 1.41.14 (22-Dec-2010)
/etc/init.d/rcS: line 131: can't create /dev/vfd: No such device or address

INIT: Switching to runlevel: 6


INIT: Sending processes the TERM signal

Sending all processes the TERM signal...done.
Sending all processes the KILL signal...done.
Deactivating swap...umount: tmpfs busy - remounted read-only
done.
Unmounting local filesystems...umount: tmpfs busy - remounted read-only
done.
Rebooting...

Board: STb7100-Reference (MB442) [29-bit mode]


BootV6 1.3.1 (Mar 12 2010 - 15:04:58) - stm23_0043

DRAM: 128 MiB
NOR: 8 MiB
In: serial
Out: serial
Err: serial
IdentID : 03 05 08 00 00 15 38

Hit any key to stop autoboot: 3 2 1 0
(Re)start USB...
USB: scanning bus for devices... 4 USB Device(s) found
scanning bus for storage devices... ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
ERROR: CTL:TIMEOUT
2 Storage Device(s) found

1723582 bytes read
## Booting image at a5000000 ...
Image Name: Linux-2.6.32.28_stm24_0207
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1723518 Bytes = 1.6 MiB
Load Address: 84001000
Entry Point: 84002000
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/sda1 rw ip=172.100.100.60:172.100.100.10:172.100.100.1:255.255.255.0:SpiderBox:eth0ff bigphysarea=4000 mem=128m coprocessor_mem=4m@0x10000000,4m@0x10400000 init=/bin/devinit printk nwhwconf=device:eth0,hwaddr:00:00:0F:03:35:38 Manufacture=STi7101_YW-MOON-IBOX-VER1.0_EDISION STB_ID=03:05:08:00:00:15:38 - 0x00000000 - 0 ...


INIT: version 2.86 booting

init frontpanel
Segmentation fault
Mount /dev in tmpfs
Copying device nodes to /dev
Starting portmap daemon....
Dual Tuner /devs Vorhanden, Tuner Ready ...
Lade Filesystem Treiber ext3 ext4 ...
Fertig
Starting DEBUG Interface
Mounting local filesystems...
Cleaning /tmp.
Hostname: ArgusVIP.
starting telnetd
init stmfb
LOADING MODULES
/etc/init.d/rcS: line 175: can't create /dev/vfd: No such device or address
load a firmware
copLoadFile (file /boot/audio.elf)
ustslave: Kernel Version: 24
base_address 0x10400000
seeking to 0
seeking to 660
seeking to a1a0
seeking to 12740
seeking to 15ce00
seeking to 15ce38
seeking to 15ce70
seeking to 1a0060
seeking to 1a0068
seeking to 1a0070
seeking to 1a0100
seeking to 1bc920
seeking to 1bea00
load v firmware
copLoadFile (file /boot/video.elf)
ustslave: Kernel Version: 24
base_address 0x10000000
seeking to 0
seeking to 4e020
seeking to f8378
seeking to f83b0
seeking to f83e8
seeking to 10ce98
seeking to 10cea4
seeking to 10ceb0
seeking to 12ed90
seeking to 12cd74
seeking to 12ee00
init embx
init AVS
AVS Aktiviert -- VIP2
init player 191
init frontends
Tuner Aktiviert -- Sharp und LG gesetzt
init drivers
np-PTI Laden...
Swap Laden ...
Kartenslots Aktivieren ...
init lircd
LinuxDVB Test (press 'h' for help)
player_open: Using 0 (and 1)
player_open: Playing /boot/bootlogo.mp4 - Audio Video
StartMp4
StartMp4: 'mdhd' Track 0, TimeScale = 25, Duration = 429 (17)
StartMp4: Track 0 type = 'vide'
StartMp4: 'mdhd' Track 1, TimeScale = 48000, Duration = 819200 (17)
StartMp4: Track 1 type = 'soun'
BuildTrackMap: MOV track type 'vide': 429 chunks, 429 samples
BuildTrackMap: TimeScale 25, Delta 1
BuildTrackMap: MOV track type 'soun': 800 chunks, 800 samples
BuildTrackMap: TimeScale 48000, Delta 1024
*** Composition Data not present.
lircd-0.8.2[708]: lircd(userspace) ready

ObeyCommand: Playback started
PlayH264Mp4File: avcC contents:
profile: 100
profile compatibility: 0
level: 31
nal length bytes: 4
number of sequence param sets: 1
sps 0 has length 26
number of picture param sets: 1
pps 0 has length 4
Fernbedienung NEU geladen
Model: hl101
vBoxType: 5
Input device name: "TDT RC event driver"
Selected Remote: Hl101 RemoteControl
RemoteControl Map:
STANDBY - 01 - 116
MUTE - 04 - 113
V.FORMAT - 02 - 47
- - 390
0BUTTON - 12 - 11
1BUTTON - 09 - 2
2BUTTON - 0a - 3
3BUTTON - 0b - 4
4BUTTON - 0c - 5
5BUTTON - 0d - 6
6BUTTON - 0e - 7
7BUTTON - 0f - 8
8BUTTON - 10 - 9
9BUTTON - 11 - 10
BACK - 14 - 158
INFO - 1a - 358
- - 392
DOWN/P- - 20 - 108
UP/P+ - 1f - 103
RIGHT/V+ - 21 - 106
LEFT/V- - 22 - 105
v+ - 1b - 115
v- - 1c - 114
p+ - 1d - 103
p- - 1e - 108
OK/LIST - 23 - 352
MENU - 17 - 139
GUIDE - 25 - 365
EXIT - 24 - 102
FAV - 19 - 364
RED - 32 - 398
GREEN - 33 - 399
YELLOW - 34 - 400
BLUE - 35 - 401
REWIND - 2c - 168
PAUSE - 28 - 119
PLAY - 29 - 207
FASTFORWARD - 2d - 208
RECORD - 16 - 167
STOP - 27 - 128
SLOWMOTION - 30 - 409
ARCHIVE - 26 - 361
SAT - 18 - 381
STEPBACK - 2a - 412
STEPFORWARD - 2b - 407
MARK - 25 - 365
TV/RADIO - 13 - 378
USB - 31 - 206
TIMER - 03 - 359
Supports Long KeyPress: 0
lircd-0.8.2[708]: accepted new client on /dev/lircd

Mounting local filesystems...
Hostname: ArgusVIP.
starting telnetd
Starting FTP server: vsftpd.
Deconfiguring network interfaces... done.
/etc/init.d/rcS: line 555: can't create /dev/vfd: No such device or address
LOADING E2
starting e2->
Emu Autostart ...
Emu Autostart ... FERTIG
RAM Leeren ...
RAM Leeren ... FERTIG
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... Oscam startet...
Oscam ist gestartet
/usr/local/bin/enigma2: /usr/lib/libjpeg.so.8: no version information available (required by /usr/local/bin/enigma2)
done.
Display Uhr nicht Aktiv ...
Autonews inaktiv ...
Samba Menu einstellungen nicht Aktiv...OFF
setenv('prefix', '/usr', 0)
setenv('exec_prefix', '${prefix}', 0)
setenv('bindir', '${exec_prefix}/bin', 0)
setenv('sbindir', '${exec_prefix}/sbin', 0)
setenv('libexecdir', '${exec_prefix}/libexec', 0)
setenv('datarootdir', '${prefix}/share', 0)
setenv('datadir', '/usr/local/share', 0)
setenv('sysconfdir', '/etc', 0)
setenv('sharedstatedir', '${prefix}/com', 0)
setenv('localstatedir', '${prefix}/var', 0)
setenv('libdir', '${exec_prefix}/lib', 0)
setenv('localedir', '${datarootdir}/locale', 0)
setenv('prefix', '/usr', 1)
setenv('exec_prefix', '/usr', 1)
setenv('bindir', '/usr/bin', 1)
setenv('sbindir', '/usr/sbin', 1)
setenv('libexecdir', '/usr/libexec', 1)
setenv('datarootdir', '/usr/share', 1)
setenv('datadir', '/usr/local/share', 1)
setenv('sysconfdir', '/etc', 1)
setenv('sharedstatedir', '/usr/com', 1)
setenv('localstatedir', '/usr/var', 1)
setenv('libdir', '/usr/lib', 1)
setenv('localedir', '/usr/share/locale', 1)
resolve: resolve ${datadir}/enigma2/encoding.conf
resolve: -> /usr/local/share/enigma2/encoding.conf
resolve: resolve ${libdir}/enigma2/python
resolve: -> /usr/lib/enigma2/python
PYTHONPATH: /usr/lib/enigma2/python
+ (1) Background File Eraser
+ (8) graphics acceleration manager
STMFB accel interface available

+ (9) GFBDC
12288k video mem
2568kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5120)
+ (9) gLCDDC
eDBoxLCD::eDBoxLCD >
Error: No matching USB device found!
config -> (w 320, h 240)
lcd buffer 0x2aefe008 153600 bytes, stride 640
eDBoxLCD::eDBoxLCD (w 320, h 240, depth 16)<
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
eDVBCI_UI >
eDVBCI_UI <
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
Input device "TDT RC event driver" is not a keyboard.
failed to open /dev/input/event1
Input device "" is not a keyboard.
failed to open /dev/input/event2
Input device "" is not a keyboard.
failed to open /dev/input/event3
Input device "" is not a keyboard.
Found 4 input devices!
+ (21) Console RC Driver
failed to open /dev/tty0
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0: reset requested
deleteSessions >
deleteSessions <
CI Slot 1: reset requested
deleteSessions >
deleteSessions <
stat on /dev/dvb/adapter0/ci2 failed

CI Slot 0 setSource(0)
CI Slot 1 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
cannot open /proc/stb/tsmux/input2
cannot open /proc/stb/tsmux/input3
done, found 2 common interface slots
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
resolve: resolve ${sysconfdir}/enigma2/lamedb
resolve: -> /etc/enigma2/lamedb
---- opening lame channel db
reading services (version 4)
main thread is non-idle! display spinner!
no spinner DC!
loaded 2369 services
scanning for frontends..
opening frontend 0
detected satellite frontend
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
close frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) No such device
found 1 adapter, 1 frontends(1 sim) and 3 demux, boxtype 12
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
resolve: resolve ${datadir}/enigma2/skin_default/pal.png
resolve: -> /usr/local/share/enigma2/skin_default/pal.png
Loading spinners...
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait1.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait2.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait3.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait4.png
resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
resolve: -> /usr/local/share/enigma2/skin_default/spinner/wait5.png
found 4 spinner!

executing main
setIoPrio best-effort level 3 ok
resolve: resolve ${libdir}/enigma2/python/mytest.py
resolve: -> /usr/lib/enigma2/python/mytest.py
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${sysconfdir}/
resolve: -> /etc/
resolve: resolve ${datadir}/fonts/
resolve: -> /usr/local/share/fonts/
main thread is non-idle! display spinner!
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${libdir}/enigma2/python/Plugins/
resolve: -> /usr/lib/enigma2/python/Plugins/
resolve: resolve ${datadir}/enigma2/po/
resolve: -> /usr/local/share/enigma2/po/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
resolve: resolve ${sysconfdir}/enigma2/playlist/
resolve: -> /etc/enigma2/playlist/
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
resolve: resolve ${datadir}/enigma2/dealer
resolve: -> /usr/local/share/enigma2/dealer
resolve: resolve ${datadir}/meta
resolve: -> /usr/local/share/meta
resolve: resolve ${datadir}/enigma2/defaults/
resolve: -> /usr/local/share/enigma2/defaults/
main thread is non-idle! display spinner!
StopMp4:
Player: Terminating 1
CheckKey: Attempting to shut down
couldn't open fp
enumerating block devices...
found block device 'loop0': blacklisted
found block device 'loop1': blacklisted
found block device 'loop2': blacklisted
found block device 'loop3': blacklisted
found block device 'loop4': blacklisted
found block device 'loop5': blacklisted
found block device 'loop6': blacklisted
found block device 'loop7': blacklisted
found block device 'mtdblock0': blacklisted
End of file (1): Running time = 17 seconds
Linux DVB Test terminating
found block device 'mtdblock1': blacklisted
found block device 'mtdblock2': blacklisted
found block device 'mtdblock3': blacklisted
found block device 'mtdblock4': blacklisted
found block device 'sda': ok, removable=True, cdrom=False, partitions=['sda1']
[Harddisk] start automount
found block device 'sda1': error querying properties
found block device 'sdb': ok, removable=False, cdrom=False, partitions=['sdb1']
new Harddisk sdb -> /dev/sdb -> /dev/sdb
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
[Harddisk] start automount
found block device 'sdb1': error querying properties
found block device 'ramzswap0': ok, removable=False, cdrom=False, partitions=[]
couldn't read model: [Errno 2] No such file or directory: '/sys/devices/virtual/block/ramzswap0/device/model'
Preferred tag editor set to None
Reading satellites.xml
resolve: resolve ${datadir}/enigma2/unicable.xml
resolve: -> /usr/local/share/enigma2/unicable.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr STV090x Multistandard, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode: single
sec config completed
resolve: resolve ${datadir}/enigma2/setup.xml
resolve: -> /usr/local/share/enigma2/setup.xml
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED25.tv
158 entries in Bouquet userbouquet.ED25.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.tv
134 entries in Bouquet userbouquet.ED00.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED01.tv
67 entries in Bouquet userbouquet.ED01.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED02.tv
14 entries in Bouquet userbouquet.ED02.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED03.tv
45 entries in Bouquet userbouquet.ED03.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED04.tv
20 entries in Bouquet userbouquet.ED04.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED23.tv
12 entries in Bouquet userbouquet.ED23.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED26.tv
118 entries in Bouquet userbouquet.ED26.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
9 entries in Bouquet bouquets.tv
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/bouquets.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.ED00.radio
225 entries in Bouquet userbouquet.ED00.radio
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
2 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
add dreampackage scanner plugin
added
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Display)
[FONT] adding font /usr/local/share/enigma2/graphlcd/fonts/nokian.ttf...OK (Nokian)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
588kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/enigma2/Elgato-HD/num.ttf...OK (Num)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/local/share/enigma2/keymap.xml
[ePopen] command: ip -o addr show dev eth0
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setLCDBrightness
eDBoxLCD::getInstance
eDBoxLCD::setInverted
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating keymap: Dreambox Keyboard Deutsch
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating language German
language set to de_DE
[CleanupWizard] freeSpaceAvailable--> 1720552
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
setMode - port: HDMI mode: 720p rate: 60Hz
-> setting aspect, policy, policy2, wss 16:9 letterbox panscan auto
updateColor: HDMI
resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
--> applying pep values
couldn't apply pep values.
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
Plugins
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[eSocketMMIHandler] created successfully
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
/usr/lib/python2.6/site-packages/twisted/spread/pb.py:30: DeprecationWarning: the md5 module is deprecated; use hashlib instead
import md5
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x181e80c>}
starting hotplug handler
add device sda to bdpoll current state: medium inserted
It's now Sat Jan 1 01:00:50 2000
[timer.py] next activation: 946684950 (in 99222 ms)
It's now Sat Jan 1 01:00:50 2000
[timer.py] next activation: 946684950 (in 99204 ms)
Looking for embedded skin
allocating new converter!
Looking for embedded skin
Looking for embedded skin
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
Looking for embedded skin
setValue 90
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
RemovePopup, id = ZapError
allocating new converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/%s/
resolve: -> /usr/local/share/enigma2/%s/
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
allocating new converter!
reused converter!
allocating new converter!
resolve: resolve ${datadir}/enigma2/graphlcd/%s/
resolve: -> /usr/local/share/enigma2/graphlcd/%s/
reused converter!
reused converter!
allocating new converter!
allocating new converter!
allocating new converter!
playing -1:0:0:0:0:0:0:0:0:0:
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 27(16)
poll: unhandled POLLERR/HUP/NVAL for fd 29(17)
child has terminated
pipes closed
192.168
0.0.0.0
nameservers: [[192, 168, 1, 1]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1], 'address': [192, 168, 1, 100]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 100], 'up': True, 'mac': '00:00:0f:03:35:38', 'dhcp': False, 'bcast': [192, 168, 1, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 1]}}
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
lircd-0.8.2[708]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2

action -> InfobarChannelSelection openServiceList
lircd-0.8.2[708]: write_socket: 5, 0000000000000035 00 blue lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000035 00 blue lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 35 -> blue lircd.conf_FB2
hV)ÄÎÈ{`@
action -> ChannelSelectBaseActions showFavourites
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 000000000000001f 00 up lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 1f -> up lircd.conf_FB2
2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÎÈ{`@
action -> OkCancelActions ok
lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000020 00 down lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 20 -> down lircd.conf_FB2
hV)ÄÎÈ{`@
lircd-0.8.2[708]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(vorher)


lircd-0.8.2[708]: not blocked fd =-1


lircd-0.8.2[708]: write_socket: 5, 0000000000000023 00 ok lircd.conf_FB2
(nachher)


[ HL101 RCU ] key: 23 -> ok lircd.conf_FB2
2
hV)ÄÎÈ{`@
action -> OkCancelActions ok
playing 1:0:19:EF10:421:1:C00000:0:0:0:
[__evStart]
[__evSeekableStatusChanged]
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0421:0001
opening frontend 0
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[eDVBCAService] new channel 0x1363ec0!
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 10832250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1082 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF10:421:1:C00000:0:0:0:
allocate demux
resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
resolve: -> /etc/scan_tp_valid_check.py
[SEC] invalidate current switch params
[SEC] setVoltage 2
FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
[SEC] sleep 500ms
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBCAService] channel 0x1363ec0 running
[eDVBLocalTimerHandler] channel 0x1363ec0 running
no version filtering
0014: 70 00 00 00 00 00
mask: fc 00 00 00 00 00
mode: 00 00 00 00 00 00
[eEPGCache] channel 0x1363ec0 running
stop release channel timer
no version filtering
0012: 4e ef 10 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
ok ... now we start!!
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
allocate demux
disable teletext subtitles
decoder state: play, vpid=255, apid=259
DMX_SET_PES_FILTER(0xff) - pcr - ok
DMX_SET_PES_FILTER(0x103) - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0xff) - video - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x20) - ttx - ok
VIDEO_CONTINUE - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
[__evUpdatedInfo]
[writeChannelName]
vfd display text: RTL HD
[showCrypted]
[showDolby]
[showMp3]
+ 1/1 TID 00
done!
PATready
use pmtpid 0060 for service_id ef10
no version filtering
0060: 02 ef 10 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
doing version filtering
0000: 00 00 00 33 00 00
mask: ff 00 00 3f 00 00
mode: 00 00 00 3e 00 00
-+ 1/2 TID 4e
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
decoder state: play, vpid=255, apid=259
[__evUpdatedInfo]
[writeChannelName]
vfd display text: RTL HD
[showCrypted]
[showDolby]
[showMp3]
[eDVBCAService] new service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF10:421:1:C00000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 00000000
[eDVBCAService] send 370 bytes
9f 80 32 82 01 6c 03 ef 10 19 01 52 01 81 08 00 c0 00 00 04 21 00 01 82 02 01 00 84 02 00 60 09 7f 18 30 fc cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 69 00 00 3d a3 0d 01 80 11 80 00 02 18 30 01 0f 9f 20 ff aa 15 02 80 11 00 00 00 64 00 03 03 21 00 00 00 02 18 30 00 00 00 64 aa 15 02 80 11 00 00 0b ea 00 03 03 21 00 00 00 02 18 30 00 00 0b ea 01 00 26 a3 0d 01 80 11 80 00 02 18 30 01 0d ab 20 ff aa 15 02 80 11 00 00 0b b8 00 03 03 21 00 00 00 02 18 43 00 00 0b b8 09 5c 18 43 f9 cc 86 0e 00 80 11 0f 9f 20 fc 01 80 11 0d 7a 20 fc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 43 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 66 00 03 03 21 00 00 02 18 43 5d 00 00 66 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 43 5d 00 0b ea 00 09 04 09 c4 fb cc 09 04 09 8c fa cc 09 04 06 48 ff cc 09 4c 18 60 fe cc 8c 46 00 00 43 8c 13 00 80 11 08 02 18 60 20 0a 09 38 59 00 0f 9f 59 00 0f 9f aa 15 03 80 11 5d 00 00 68 00 03 03 21 00 00 02 18 60 5d 00 00 68 00 aa 15 03 80 11 00 00 0b ea 00 03 03 21 00 00 02 18 60 5d 00 0b ea 00 06 00 20 00 00 1b 00 ff 00 00 06 01 03 00 00 05 01 05 00 00
doing version filtering
0060: 02 ef 10 19 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 00:56:59
[eDVBLocalTimerHandler] m_time_difference is 403829729
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
before: 1
after: 1
[EPGC] next update in 2 sec
++ 2/2 TID 4e
done!
[__evUpdatedEventInfo]
doing version filtering
0012: 4e ef 10 1d 00 00
mask: ff ff ff 3f 00 00
mode: 00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 9
FE_GET_PROPERTY failed (Invalid argument)
sdt update done!
VIDEO_GET_EVENT - ok
unhandled DVBAPI Video Event 5
VIDEO_GET_EVENT - ok
[EPGC] start caching events(1350514621)
[__evVideoSizeChanged]
VIDEO_GET_EVENT - ok
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1350514628)
nr_read 30 nr_write 5
sum 35 prev_sum 0
hdd was accessed since previous check!
[IDLE] 0 600 False
[EPGC] schedule finished(1350514631)
[EPGC] stop caching events(1350514631)
[EPGC] next update in 60 min

Ducktrick????

Ist das die Version 9.10???? Also die letzte???? Ich teste gerade eine Aufnahme.

Aufnehmen und abspielen soweit wie ich das in so kurzer Zeit sagen kann funtionieren auch. Habe RTL HD augenommen.

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

ja das ist die 9.10 Version

Auffällig auch das der Bootloader immer noch der meinung ist das ein USB Gerät einen Fehler verursacht

scanning bus for storage devices... ERROR: CTL:TIMEOUT 
 ERROR: CTL:TIMEOUT 
 ERROR: CTL:TIMEOUT 
 ERROR: CTL:TIMEOUT 
 ERROR: CTL:TIMEOUT

Jedoch scheint der Stick dann aber schon Initialisiert zu sein und das System Bootet , Später werden die USB nochmal neu Initialisiert und dann ist scheinbar auch die Platte bereit , das ganze Log sieht bis auf die eine stelle ganz OK aus

Das heist auf jeden Fall das es am Dualboot Liegt , was ich im Bootlog nicht sehe ist wie viele Sec laufen den Runter bevor da steht das 2 USB-Device Found sind , ich schätze das ist zum Bootloader vom Vip1 weniger und daher die Fehler , erhöhen wir den Wert sollten die fehler weg sein da die Platte mehr Zeit zum Starten hat , z.B kommen da nur 3 Sec stell es auf 6, die Bootargs können peer Seriel bearbeitet werden , hab ich mal vor 2 Jahren bei meinen Vip gemacht daher weiß ich jetzt den Standart wert nicht mehr

 

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

Wenn Du mir sagst wie und wo ich von 3 auf 6 sec. etwas ändern soll dann versuche ich das.

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

machen wir heut nachmittag so gegen 16 17 uhr. dann hab ich feierabend

 

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

Hier noch des Rätsels Lösung. Ich habe die Versionen von beiden Sticks getauscht, also die alte Version auf einen neuen Stick und die neue auf einen alten Stick. Es liegt also wirklich am USB Stick. Beide haben eine Größe von 2 GB. Mit den größeren hatte ich egal mit welcher Version keine Erfolge. Also alle die das hier lesen und ihre Version nicht funktioniert dann wechselt den USB Stick, ich wollte es auch nicht so recht glauben, es ist aber so.
Bei mir wird es erst wieder so gegen 22.30Uhr werden. Habe Spätschicht.

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

ja dann ist der stick wohl einen tick schneller als der andere und die festplatte kommt dann an 2 stelle erst . wäre sie an erster geladen worden so hättest du wieder einen abbruch und das laden von iltv. wie und was an den bootargs geändert werden muss um langsammere geräte verwenden zu können poste ich später in einen separaten post . das kann dann ein admin eventuell anpinnen für user mit nur noname hardware

 

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

Ich habe das gerade mal versucht. Selbst wenn ich den Wert auf 15 erhöhe bekomme ich den Fehler. Der Stick geht dann für 15sek. aus, dann leuchtet er, die Platte beginnt zu laufen und E2 startet. Wenn ich den Wert auf 1 stelle dann geht der Stick halt nur für 1sek. aus aber startet dann auch E2 problemlos.

Hier mal der Link zur Anleitung:

HowTo Bootargs ändern für Vip Vip2 Vip1v2 Opticum

 

[Ducktrick]

AW: E2-Image von TeamCS/Ducktrick

hmm dann versteh ich nicht wo die Fehler werte herkommen , das rootdelay kann es nicht sein da das Dateisystem sowie die Festplatte sauber erkannt werden wenn der Kernel gebootet ist. Ich schau mir mal noch alle anderen bootargs an , eventuell Find ich ja noch was


EDIT

Du kannst ja mal beim Bootloader

printenv

eingeben , eventuell haben wir da ja unterschiede zum Vip1

 

[tamabi]

AW: E2-Image von TeamCS/Ducktrick

Das ist nett, aber vielleicht liegt es ja am Stick, dieser jetzt ging bis jetzt ja auch immer. Achso, ich habe nie den Hauptschalter benutzt, habe immer über das Menü einen Neustart durchgeführt.
Also ich bin voll zufrieden mit der Version, bis jetzt läuft sie echt gut. Jetzt fehlt nur noch der 2. Tuner und dann glaube ich dass der VIP2 ein echter Renner wird. Ich war ja schon mit ILTV zufrieden, aber da kannte ich Enigma auch noch nicht.