Drucken am Server

[    1.780327] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[    1.780330] usb usb1: SerialNumber: 0000:00:1d.7
[    1.780505] usb usb1: configuration #1 chosen from 1 choice
[    1.780582] hub 1-0:1.0: USB hub found
[    1.780610] hub 1-0:1.0: 6 ports detected
[    1.781769] libata version 3.00 loaded.
[    1.804512] ata_piix 0000:00:1f.1: version 2.13
[    1.804548] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.804624] ata_piix 0000:00:1f.1: setting latency timer to 64
[    1.806073] scsi0 : ata_piix
[    1.810691] scsi1 : ata_piix
[    1.811758] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.811764] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.817549] uhci_hcd: USB Universal Host Controller Interface driver
[    1.817653] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.817670] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.817675] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.817709] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.817761] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[    1.817830] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.817835] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.817838] usb usb2: Product: UHCI Host Controller
[    1.817841] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.817844] usb usb2: SerialNumber: 0000:00:1d.0
[    1.818216] usb usb2: configuration #1 chosen from 1 choice
[    1.820598] hub 2-0:1.0: USB hub found
[    1.820631] hub 2-0:1.0: 2 ports detected
[    1.820772] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.820789] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.820794] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.820829] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.820881] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[    1.820953] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.820958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.820962] usb usb3: Product: UHCI Host Controller
[    1.820964] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.820967] usb usb3: SerialNumber: 0000:00:1d.1
[    1.821332] usb usb3: configuration #1 chosen from 1 choice
[    1.821589] hub 3-0:1.0: USB hub found
[    1.821621] hub 3-0:1.0: 2 ports detected
[    1.821751] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    1.821767] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.821772] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.821793] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.821846] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    1.821913] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.821918] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.821922] usb usb4: Product: UHCI Host Controller
[    1.821925] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[    1.821928] usb usb4: SerialNumber: 0000:00:1d.2
[    1.822284] usb usb4: configuration #1 chosen from 1 choice
[    1.822546] hub 4-0:1.0: USB hub found
[    1.822577] hub 4-0:1.0: 2 ports detected
[    1.976607] ata2.00: ATAPI: SAMSUNG CDRW/DVD SM-352F, T902, max UDMA/33
[    1.976978] ata1.00: ATA-6: WDC WD400BB-75FJA1, 14.03G14, max UDMA/100
[    1.976983] ata1.00: 78125000 sectors, multi 8: LBA
[    1.977016] ata1.00: limited to UDMA/33 due to 40-wire cable
[    1.977428] ata2.00: configured for UDMA/33
[    1.984404] ata1.00: configured for UDMA/33
[    1.984622] scsi 0:0:0:0: Direct-Access     ATA      WDC WD400BB-75FJ 14.0 PQ: 0 ANSI: 5
[    1.985952] scsi 1:0:0:0: CD-ROM            SAMSUNG  CDRW/DVD SM-352F T902 PQ: 0 ANSI: 5
[    2.016345] b44 0000:01:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.045454] sd 0:0:0:0: [sda] 78125000 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    2.045688] sd 0:0:0:0: [sda] Write Protect is off
[    2.045694] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.045795] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.046365]  sda:sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[    2.051027] Uniform CD-ROM driver Revision: 3.20
[    2.052216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.059423]  sda1 sda2 < sda5 >
[    2.071453] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.078156] ssb: Sonics Silicon Backplane found on PCI device 0000:01:09.0
[    2.078924] b44.c:v2.0
[    2.100614] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0f:1f:48:c7:2f
[    2.115074] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.116652] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.463982] device-mapper: uevent: version 1.0.3
[    2.466078] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.556040] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    2.730975] usb 2-1: New USB device found, idVendor=0403, idProduct=6001
[    2.730982] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    2.730986] usb 2-1: SerialNumber: Reader 63F052D
[    2.731195] usb 2-1: configuration #1 chosen from 1 choice
[    2.976111] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    2.978222] PM: Starting manual resume from disk
[    2.978231] PM: Resume from partition 254:1
[    2.978233] PM: Checking hibernation image.
[    2.978644] PM: Error -22 checking image file
[    2.978649] PM: Resume from disk failed.
[    3.043118] kjournald starting.  Commit interval 5 seconds
[    3.043148] EXT3-fs: mounted filesystem with ordered data mode.
[    3.148899] usb 3-2: New USB device found, idVendor=0403, idProduct=6001
[    3.148906] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[    3.148911] usb 3-2: SerialNumber: Reader 1C2E725
[    3.149091] usb 3-2: configuration #1 chosen from 1 choice
[    3.392061] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    3.572818] usb 4-1: New USB device found, idVendor=04b8, idProduct=0818
[    3.572825] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.572829] usb 4-1: Product: USB MFP
[    3.572832] usb 4-1: Manufacturer: EPSON
[    3.572835] usb 4-1: SerialNumber: L80020507070706250
[    3.573012] usb 4-1: configuration #1 chosen from 1 choice
[    5.385084] udev[259]: starting version 164
[    6.227722] processor LNXCPU:00: registered as cooling_device0
[    6.235168] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    6.239991] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.240093] ACPI: Power Button [VBTN]
[    6.240467] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.240482] ACPI: Power Button [PWRF]
[    6.241253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.360672] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.374783] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    7.226189] intel_rng: FWH not detected
[    7.960488] usbcore: registered new interface driver usbserial
[    7.961205] USB Serial support registered for generic
[    7.961956] usbcore: registered new interface driver usbserial_generic
[    7.961963] usbserial: USB Serial Driver core
[    8.567820] USB Serial support registered for FTDI USB Serial Device
[    8.568764] ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected
[    8.569888] usb 2-1: Detected FT232BM
[    8.569894] usb 2-1: Number of endpoints 2
[    8.569898] usb 2-1: Endpoint 1 MaxPacketSize 64
[    8.569901] usb 2-1: Endpoint 2 MaxPacketSize 64
[    8.569904] usb 2-1: Setting MaxPacketSize 64
[    8.575202] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[    8.575424] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0
[    8.575462] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[    8.575533] usb 3-2: Detected FT232BM
[    8.575537] usb 3-2: Number of endpoints 2
[    8.575541] usb 3-2: Endpoint 1 MaxPacketSize 64
[    8.575544] usb 3-2: Endpoint 2 MaxPacketSize 64
[    8.575546] usb 3-2: Setting MaxPacketSize 64
[    8.578288] ftdi_sio ttyUSB1: Unable to read latency timer: -32
[    8.578538] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB1
[    8.578627] usbcore: registered new interface driver ftdi_sio
[    8.578632] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[    8.596818] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.607906] parport_pc 00:09: reported by Plug and Play ACPI
[    8.607966] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    8.798427] [drm] Initialized drm 1.1.0 20060810
[    9.378964] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.379056] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    9.800047] intel8x0_measure_ac97_clock: measured 54174 usecs (2610 samples)
[    9.800052] intel8x0: clocking to 48000
[    9.802572] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.802582] i915 0000:00:02.0: setting latency timer to 64
[    9.852340] [drm] set up 7M of stolen space
[    9.879783] [drm] initialized overlay support
[   10.123781] Console: switching to colour frame buffer device 160x64
[   10.131616] fb0: inteldrmfb frame buffer device
[   10.131621] registered panic notifier
[   10.134883] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.718646] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0818
[   10.718727] usbcore: registered new interface driver usblp
[   11.932394] EXT3 FS on dm-0, internal journal
[   12.391331] loop: module loaded
[   12.551346] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[   12.551422] ACPI: I/O resource smsc47m1 [0xc00-0xc7f] conflicts with ACPI region WSTX [0xc04-0xc08]
[   12.551530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.561030] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[   12.561113] ACPI: I/O resource smsc47m1 [0xc00-0xc7f] conflicts with ACPI region WSTX [0xc04-0xc08]
[   12.561224] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.571273] smsc47m1: Found SMSC LPC47M10x/LPC47M112/LPC47M13x
[   12.571359] ACPI: I/O resource smsc47m1 [0xc00-0xc7f] conflicts with ACPI region WSTX [0xc04-0xc08]
[   12.571471] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.871270] Adding 1626104k swap on /dev/mapper/Server-swap_1.  Priority:-1 extents:1 across:1626104k
[   15.487534] fuse init (API version 7.13)
[   17.194260] RPC: Registered udp transport module.
[   17.194267] RPC: Registered tcp transport module.
[   17.194270] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.388489] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   17.643325] svc: failed to register lockdv1 RPC service (errno 97).
[   17.649662] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   17.708126] NFSD: starting 90-second grace period
[   19.442391] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.816199] b44: eth0: Link is up at 100 Mbps, full duplex.
[   22.816204] b44: eth0: Flow control is off for TX and off for RX.
[   22.816494] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   28.721872] Bluetooth: Core ver 2.15
[   28.722067] NET: Registered protocol family 31
[   28.722072] Bluetooth: HCI device and connection manager initialized
[   28.722078] Bluetooth: HCI socket layer initialized
[   29.021613] Bluetooth: L2CAP ver 2.14
[   29.021620] Bluetooth: L2CAP socket layer initialized
[   29.266808] Bluetooth: RFCOMM TTY layer initialized
[   29.266820] Bluetooth: RFCOMM socket layer initialized
[   29.266824] Bluetooth: RFCOMM ver 1.11
[   29.273858] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   29.273866] Bluetooth: BNEP filters: protocol multicast
[   29.624707] Bridge firewalling registered
[   30.067661] Bluetooth: SCO (Voice Link) ver 0.6
[   30.067667] Bluetooth: SCO socket layer initialized
[   31.167582] lp0: using parport0 (interrupt-driven).
[   31.319571] ppdev: user-space parallel port driver
[   33.460020] eth0: no IPv6 routers present
[   33.777540] usb 4-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   39.603251] ip_tables: (C) 2000-2006 Netfilter Core Team

[74182.424110] usb 4-1: USB disconnect, address 2
[74182.424661] usblp0: removed
[74199.528137] usb 4-1: new full speed USB device using uhci_hcd and address 3
[74199.713096] usb 4-1: New USB device found, idVendor=04b8, idProduct=0818
[74199.713104] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[74199.713108] usb 4-1: Product: USB MFP
[74199.713111] usb 4-1: Manufacturer: EPSON
[74199.713114] usb 4-1: SerialNumber: L80020507070706250
[74199.713409] usb 4-1: configuration #1 chosen from 1 choice
[74199.753333] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0818
[74200.973939] usb 4-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1