DM800 SE - Oscam + D09 und G09

[hoatzer]

Guten Abend,

ich habe schon viel bei euch gelesen und schreibe jetzt mal meine erste Frage.
Ich bin mir sicher, dass ihr mir helfen könnt.

Folgender Aufbau:

Ich habe eine DM800 SE mit einem Experimental Image vom 8.12.2010 und Gemini3
Drin steckt meine D09 Karte für Sky und KD.
Nun habe ich eine 2. Karte für KD Digital Home bekommen.
Es ist eine G09 und ich weiss nicht, wie ich beide parallel zum laufen bekommen kann.

Als Emu läuft der CCcam_2.2.1_oscam_1.00_cam
Mit der D09 gibt's keine Probleme, aber Kabel1 Classic oder Romance wollen einfach nicht hell werden.

Hier meine Oscam.conf:

[global]
Nice = -1
WaitForCards = 1
ClientTimeout = 30
LogFile = stdout
Level = 15
CacheDelay = 10
PreferLocalCards = 1
saveinithistory = 1


[cs357x]
port = 27000

#[cccam]
#port = 34000
#reshare = 1
#irgnorereshare = 0
#version = 2.1.4
#updateinterval = 300
#keepconnected = 1

[newcamd]
key = 0102030405060708091011121314
port = 17234@1834:000401
#keepalive = 1
mgclient = 1


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0

Das ist die Oscam.server:


[reader]
label = kd
enable = 1
protocol = internal
device = /dev/sci0
services =
caid = 1834
boxid = 12345678
rsakey = 8A...CC
boxkey = 66...7B
detect = cd
mhz = 600
cardmhz = 600
ident =
group = 1
emmcache = 1,3,2
lb_weight = 100


[reader]
label = reader-2
enable = 1
protocol = internal
device = /dev/sci1
services =
caid = 09C7
boxid = 12345678
detect = cd
mhz = 3
cardmhz = 3
ident = 09C7:000000
group = 1,2
emmcache = 1,3,2
lb_weight = 100

Und zum Schluss die Oscam.User:


[account]
user = local
pwd = pass
group = 1,2
monlevel = 2
au = 1


Wie ihr seht steckt die D09 oben und die G09 unten.

Ich hoffe ich hab keine Info's vergessen, ansonsten liefere ich gerne alles nach.

Danke schon mal vorab und Gruß,
Hoatzer

 

[GTD Bastion]

AW: DM800 SE - Oscam + D09 und G09

Geb deinem dvbapi User die Caids mit.

Und poste mal ein Log.

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Hi T1x und danke für deine Antwort.

ich hab Gestern die Zeile CAID = 1834,09C7 beim User local eingetragen, leider ohne Erfolg.

Das Log muss ich erst noch aktivieren. Ich reiche es nach sobald ich es hab.
Ich kann schon mal den Standardoutput vom manuellen starten des Scripts anbieten:

Spoiler

/usr/script/CCcam_2.2.1_oscam_1.00_cam.sh
/usr/script/CCcam_2.2.1_oscam_1.00_cam.sh stop
r@dm800se:~# /usr/script/CCcam_2.2.1_oscam_1.00_cam.sh start
/usr/script/CCcam_2.2.1_oscam_1.00_cam.sh start
Warning: keyword 'level' in global section not recognized
2011/09/06 22:00:57 2AAC63B0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4066 (mips-tuxbox-linux)
2011/09/06 22:00:57 2AAC63B0 s version=1.00-unstable_svn, build #4066, system=mips-tuxbox-linux, nice=-1
2011/09/06 22:00:57 2AAC63B0 s client max. idle=120 sec, debug level=0
2011/09/06 22:00:57 2AAC63B0 s max. logsize=unlimited
2011/09/06 22:00:57 2AAC63B0 s client timeout=30000 ms, fallback timeout=2500 ms, cache delay=10 ms
2011/09/06 22:00:57 2AAC63B0 s auth size=4800
2011/09/06 22:00:57 2AAC63B0 s Cannot open file "/var/tuxbox/config/oscam.services" (errno=2)
2011/09/06 22:00:57 2AAC63B0 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/09/06 22:00:57 2AAC63B0 s signal handling initialized (type=sysv)
2011/09/06 22:00:57 2AAC63B0 s can't open file "/var/tuxbox/config/oscam.srvid" (err=2), no service-id's loaded
2011/09/06 22:00:57 2AAC63B0 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2011/09/06 22:00:57 2AAC63B0 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2011/09/06 22:00:57 2AAC63B0 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2011/09/06 22:00:57 2AAC63B0 s monitor: disabled
2011/09/06 22:00:57 2AAC63B0 s camd33: disabled
2011/09/06 22:00:57 2AAC63B0 s camd35: initialized (fd=5, port=27000)
2011/09/06 22:00:57 2AAC63B0 s cs378x: disabled
2011/09/06 22:00:57 2AAC63B0 s newcamd: initialized (fd=6, port=17234, crypted)
2011/09/06 22:00:57 2AAC63B0 s CAID: 1834
2011/09/06 22:00:57 2AAC63B0 s provid #0: 000401
2011/09/06 22:00:57 2AAC63B0 s newcamd: initialized (fd=7, port=17235, crypted)
2011/09/06 22:00:57 2AAC63B0 s CAID: 09C7
2011/09/06 22:00:57 2AAC63B0 s provid #0: 000000
2011/09/06 22:00:57 2AAC63B0 s cccam: disabled
2011/09/06 22:00:57 2AAC63B0 s radegast: disabled
2011/09/06 22:00:57 2AAC63B0 s http thread started
2011/09/06 22:00:57 2AAC63B0 s creating thread for device /dev/sci0 slot 0
2011/09/06 22:00:57 2AAC63B0 s creating thread for device /dev/sci1 slot 0
2011/09/06 22:00:57 2AAC63B0 s waiting for local card init
2011/09/06 22:00:57 2AF0B4B0 r reader thread started (thread=2AF0B4B0, label=kd, device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2011/09/06 22:00:57 2AE0B4B0 h HTTP Server listening on port 8080
2011/09/06 22:00:57 2B00B4B0 r reader thread started (thread=2B00B4B0, label=reader-2, device=/dev/sci1, detect=cd, mhz=3, cardmhz=3)
2011/09/06 22:00:57 2AF0B4B0 r kd card detected
2011/09/06 22:00:57 2B00B4B0 r reader-2 card detected
2011/09/06 22:00:59 2B00B4B0 r ATR: 3F ... 03
2011/09/06 22:01:00 2B00B4B0 r ERROR: Parse_ATR returned error
2011/09/06 22:01:00 2B00B4B0 r Error activating card.
2011/09/06 22:01:00 2AF0B4B0 r ATR: 3B ... 6D
2011/09/06 22:01:01 2AF0B4B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2011/09/06 22:01:01 2B00B4B0 r ATR: 3F... 03
2011/09/06 22:01:02 2AF0B4B0 r detect irdeto tunneled nagra card
2011/09/06 22:01:02 2AF0B4B0 r rsa key configured -> using nagra mode
2011/09/06 22:01:02 2B00B4B0 r ERROR: Parse_ATR returned error
2011/09/06 22:01:02 2B00B4B0 r Error activating card.
2011/09/06 22:01:04 2B00B4B0 r ATR: 3F ... 03
2011/09/06 22:01:05 2B00B4B0 r ERROR: Parse_ATR returned error
2011/09/06 22:01:05 2B00B4B0 r Error activating card.
2011/09/06 22:01:06 2AF0B4B0 r found cardsystem
2011/09/06 22:01:06 2AF0B4B0 r ROM: D N A S P 1 8 1
2011/09/06 22:01:06 2AF0B4B0 r REV: D V R L 0 0
2011/09/06 22:01:06 2AF0B4B0 r SER: ..
2011/09/06 22:01:06 2AF0B4B0 r CAID: 1834
2011/09/06 22:01:06 2AF0B4B0 r Prv.ID: 00 00 04 01 (sysid)
2011/09/06 22:01:06 2AF0B4B0 r Prv.ID: 00 00 00 00
2011/09/06 22:01:06 2AF0B4B0 r [nagra-reader] ready for requests
2011/09/06 22:01:07 2B00B4B0 r ATR: 3F ... 03
2011/09/06 22:01:08 2B00B4B0 r ERROR: Parse_ATR returned error
2011/09/06 22:01:08 2B00B4B0 r Error activating card.
2011/09/06 22:01:10 2B00B4B0 r ATR: 3F... 03
2011/09/06 22:01:11 2B00B4B0 r ERROR: Parse_ATR returned error
2011/09/06 22:01:11 2B00B4B0 r Error activating card.
2011/09/06 22:01:11 2B00B4B0 r card initializing error

 

[GTD Bastion]

AW: DM800 SE - Oscam + D09 und G09

Bau mal deinen Reader für die G09 um:

[reader]
label                         = G09
enable                        = 1
protocol                      = internal
device                        = /dev/sci1
caid                          = 09C7
boxid                         = 12345678
detect                        = cd
group                         = 2
emmcache                      = 1,3,2
lb_weight                     = 100
cardmhz = 357
mhz = 357

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Hi,

der Reader sieht inzwischen so aus.
Leider keine Veränderung.

Weisst du, ob die DM800SE im unteren Schacht mit der G09 zurecht kommt?

Gruß

 

[GTD Bastion]

AW: DM800 SE - Oscam + D09 und G09

Poste bei sowas bitte immer einen aktuellen Log mit Spoiler bitte^^

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Asche auf mein Haupt :emoticon-0131-angel

Jetzt habe ich einen aktuellen Log-Ausschnitt, als ich auf Sat1 Comedy umschalten wollte, der über die 2. Karte (G09) laufen muss:

Spoiler

2011/09/07 10:14:16 2B10B4B0 c dvbapi: [ADD PID 0] CAID: 1861 ECM_PID: 08A7 PROVID: 000000
2011/09/07 10:14:16 2B10B4B0 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 08A9 PROVID: 000000
2011/09/07 10:14:16 2B10B4B0 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 08AA PROVID: 000000
2011/09/07 10:14:16 2B10B4B0 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 08AB PROVID: 000000
2011/09/07 10:14:16 2B10B4B0 c dvbapi: new program number: D0A3 (18610A3 unknown)
2011/09/07 10:14:17 2B10B4B0 c local (1861&000000/D0A3/89:B6BE): rejected caid (11 ms) (of 0 avail 0) (invalid caid 1861)
2011/09/07 10:14:17 2B10B4B0 c local (1722&000000/D0A3/93:9453): rejected caid (11 ms) (of 0 avail 0) (invalid caid 1722)
2011/09/07 10:14:17 2B20B4B0 c mk (1834&000401/000A/89:901E): found (814 ms) by kd (of 1 avail 1)
2011/09/07 10:14:18 2B10B4B0 c local (1834&000000/D0A3/89:FC09): not found (793 ms) (of 1 avail 1)
2011/09/07 10:14:18 2B10B4B0 c dvbapi: try pids again #1
2011/09/07 10:14:18 2B10B4B0 c local (09C7&000000/D0A3/62:3413): not found (0 ms) (of 1 avail 1)
2011/09/07 10:14:18 2B10B4B0 c local (1861&000000/D0A3/89:B6BE): rejected caid (10 ms) (of 0 avail 0) (invalid caid 1861)
2011/09/07 10:14:18 2B10B4B0 c local (1722&000000/D0A3/93:9453): rejected caid (11 ms) (of 0 avail 0) (invalid caid 1722)
2011/09/07 10:14:22 2B10B4B0 c local (1834&000000/D0A3/89C10): not found (644 ms) (of 1 avail 1)
2011/09/07 10:14:22 2B10B4B0 c dvbapi: try pids again #2
2011/09/07 10:14:22 2B10B4B0 c local (09C7&000000/D0A3/62:882E): not found (1 ms) (of 1 avail 1)
2011/09/07 10:14:22 2B10B4B0 c local (1861&000000/D0A3/89:160D): rejected caid (10 ms) (of 0 avail 0) (invalid caid 1861)
2011/09/07 10:14:22 2B10B4B0 c local (1722&000000/D0A3/93:0B64): rejected caid (11 ms) (of 0 avail 0) (invalid caid 1722)
2011/09/07 10:14:24 2B20B4B0 c mk (1834&000401/000A/89:9203): found (915 ms) by kd (of 1 avail 1)

 

[GTD Bastion]

AW: DM800 SE - Oscam + D09 und G09

Ist die Karte nu aktiv oder nicht?

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Hi,

ja wir sind jetzt einen Schritt weiter!

Spoiler

2011/09/07 12:02:36 2AAC63B0 s creating thread for device /dev/sci0 slot 0
2011/09/07 12:02:36 2AAC63B0 s creating thread for device /dev/sci1 slot 0
2011/09/07 12:02:36 2AAC63B0 s waiting for local card init
2011/09/07 12:02:36 2AE0B4B0 h HTTP Server listening on port 8080
2011/09/07 12:02:36 2AF0B4B0 r reader thread started (thread=2AF0B4B0, label=kd, device=/dev/sci0, detect=cd, mhz=600, cardmhz=6
2011/09/07 12:02:36 2B00B4B0 r reader thread started (thread=2B00B4B0, label=g09, device=/dev/sci1, detect=cd, mhz=357, cardmhz=
2011/09/07 12:02:36 2AF0B4B0 r kd card detected
2011/09/07 12:02:36 2B00B4B0 r g09 card detected
2011/09/07 12:02:38 2B00B4B0 r ATR: 3F ... 03
2011/09/07 12:02:39 2B00B4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2011/09/07 12:02:39 2AF0B4B0 r ATR: 3B ... 6D
2011/09/07 12:02:40 2AF0B4B0 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2011/09/07 12:02:40 2B00B4B0 r [videoguard2-reader] parental lock setting: FF FF FF FF
2011/09/07 12:02:40 2B00B4B0 r [videoguard2-reader] type: VideoGuard Unknown Card, caid: 09C7
2011/09/07 12:02:40 2B00B4B0 r [videoguard2-reader] serial: 2.B, BoxID: 12345678, baseyear: 1997
2011/09/07 12:02:40 2B00B4B0 r [videoguard2-reader] ready for requests
2011/09/07 12:02:40 2B00B4B0 r found cardsystem
2011/09/07 12:02:40 2B00B4B0 r [videoguard2-reader] g09 card detected
2011/09/07 12:02:40 2B00B4B0 r [videoguard2-reader] type: VideoGuard Unknown Card
2011/09/07 12:02:41 2AF0B4B0 r detect irdeto tunneled nagra card
2011/09/07 12:02:41 2AF0B4B0 r rsa key configured -> using nagra mode
2011/09/07 12:02:45 2AF0B4B0 r found cardsystem

Hell wird's leider noch nicht.

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Vllt hilft dieser Logauszug weiter?

Spoiler

2011/09/07 12:22:49 2B10B4B0 c dvbapi: [ADD PID 0] CAID: 1861 ECM_PID: 08A7 PROVID: 000000
2011/09/07 12:22:49 2B10B4B0 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 08A9 PROVID: 000000
2011/09/07 12:22:49 2B10B4B0 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 08AA PROVID: 000000
2011/09/07 12:22:49 2B10B4B0 c dvbapi: [ADD PID 3] CAID: 09C7 ECM_PID: 08AB PROVID: 000000
2011/09/07 12:22:49 2B10B4B0 c dvbapi: new program number: D0A3 (18610A3 unknown)
2011/09/07 12:22:54 2B10B4B0 c local (1861&000000/D0A3/89:4608): rejected caid (10 ms) (of 0 avail 0) (invalid caid 1861)
2011/09/07 12:22:54 2B10B4B0 c local (1722&000000/D0A3/93:5D8D): rejected caid (10 ms) (of 0 avail 0) (invalid caid 1722)
2011/09/07 12:22:55 2B10B4B0 c local (1834&000000/D0A3/89:1164): not found (663 ms) (of 1 avail 1)
2011/09/07 12:22:55 2B00B4B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/07 12:22:55 2B10B4B0 c dvbapi: try pids again #1
2011/09/07 12:22:55 2B10B4B0 c local (09C7&000000/D0A3/62:3816): not found (213 ms) (of 1 avail 1)
2011/09/07 12:22:55 2B10B4B0 c local (1861&000000/D0A3/89:4608): rejected caid (10 ms) (of 0 avail 0) (invalid caid 1861)
2011/09/07 12:22:55 2B10B4B0 c local (1722&000000/D0A3/93:5D8D): rejected caid (11 ms) (of 0 avail 0) (invalid caid 1722)
2011/09/07 12:23:04 2B10B4B0 c local (1834&000000/D0A3/89:35C6): not found (662 ms) (of 1 avail 1)
2011/09/07 12:23:05 2B00B4B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/07 12:23:05 2B10B4B0 c dvbapi: try pids again #2
2011/09/07 12:23:05 2B10B4B0 c local (09C7&000000/D0A3/62:F4AD): not found (204 ms) (of 1 avail 1)
2011/09/07 12:23:05 2B10B4B0 c local (1861&000000/D0A3/89:7ECC): rejected caid (10 ms) (of 0 avail 0) (invalid caid 1861)
2011/09/07 12:23:05 2B10B4B0 c local (1722&000000/D0A3/93:2BE8): rejected caid (11 ms) (of 0 avail 0) (invalid caid 1722)
2011/09/07 12:23:14 2B10B4B0 c local (1834&000000/D0A3/89:7B7C): not found (665 ms) (of 1 avail 1)
2011/09/07 12:23:15 2B00B4B0 r [videoguard2-reader] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2011/09/07 12:23:15 2B10B4B0 c dvbapi: try pids again #3
2011/09/07 12:23:15 2B10B4B0 c dvbapi: can't decode channel

 

[reppo]

AW: DM800 SE - Oscam + D09 und G09

Nimm mal deine Serial raus, nicht ausgeschlossen, dass hier einer von Sky mitliest.

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Thx! Besser so? :emoticon-0107-sweat

 

[hoatzer]

AW: DM800 SE - Oscam + D09 und G09

Ok, inzwischen läuft es!
Vielen Dank für die Hilfe.

Ich habe die Karte kurzzeitig in den Receiver von Sky gesteckt (Humax3000C) damit eventuell eine Aktivierung kommt.
Auf einmal wurde es hell und die Karte bekommt in der Dream jetzt auch Updates.

Danke nochmal und Gruß
Hoatzer

 

[Mogelhieb]

AW: DM800 SE - Oscam + D09 und G09

Schau mal in das G02 Starterpaket:

[DOWN]

Spoiler

Link Removed

[PASSWORT]Mog€L[/PASSWORT]

[/DOWN]

Vielleicht sind da ein paar Hinweise enthalten, die Du auch für die G09 verwenden kannst?