DM800 HD (org) bootet nicht!

[Karl-Hein]

AW: DM800 HD (org) bootet nicht!

Tuner, HDD usw. schon einmal alles ausgebaut ? Teste ob die Box bootet ohne Display !

 

[fetti67]

...ohne Display? teste ich dann gleich mal,
alle anderen Bauteile hatte ich schon ausgebaut...

...hat leider auch nichts gebracht...

hier noch einmal der eben erstellte Log

Spoiler

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.06.30 08:20:09 =~=~=~=~=~=~=~=~=~=~=~=
æ<D
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.

Dreambox D M800

FIRST STAGE 1.01(0x133/high) {BO23456}
[m

2ND STAGE OK, build #84 (2011-09-02)

0.000 - BCM board setup
0.002 - fp init
0.003 - ca init
0.906 - load config
0.933 - config loaded.
* press to enter setup
OLED found!
lcd: BOOT #84
- read config file: /boot/secondstage.conf
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
dreamupd initialized
Scanning JFFS2 FS: . | / - \ | / - \ | done.

find_inode failed for name=secondstage.conf

load: Failed to find inode

- failed to open /boot/secondstage.conf
- failed to open /cf/autorun.bat
lcd: /flash/bootlogo.elf
bootlogo size: 285065
*** BCHP: Invalid RTS setting detected. Forcing MEMC_0_CLIENT_INFO_7 (AVD_CAB_0) RR to true. Please see latest 7401 RTS documentation.
no HDMI device detected
no HDMI mode available, reverting to 720p
using 1280x720p (60.00 Hz)
create surface 1280 720
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
Virtual FB Size: 1280x720
lcd: /flash/vmlinux.gz
<5>Linux version 2.6.18-7.4-dm800 (ghost@rabbit.dream-property.net) (gcc version 4.4.3 (GCC) ) #1 Thu Sep 29 12:57:10 UTC 2011
Fetching vars from bootloader... none present, using defaults.
board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null
2 831ffebc 83029b34
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
CPU revision is:

Sie müssen registriert sein, um Links zu sehen.

Determined physical RAM map:
memory: 10000000 @

Sie müssen registriert sein, um Links zu sehen.

(usable)
---> memsize from bootloader: 148
User-defined physical RAM map:
node [00000000,

Sie müssen registriert sein, um Links zu sehen.

: RAM]
node [09400000, 06c00000: RSVD]
<5>Reserving 108 MB upper memory starting at

Sie müssen registriert sein, um Links zu sehen.

<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pages: 65536
<5>Kernel command line: console=ttyS0,115200 ip=dhcp root=/dev/mtdblock3 rootfstype=jffs2 rw
before init RAC 0x02a00000 0x00000000
after init RAC 0x02a0000f 0x0fff0000
[4294667.296000] Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.

[4294667.296000] Primary data cache 32kB, 2-way, linesize 16 bytes.

[4294667.296000] Synthesized TLB refill handler (20 instructions).

[4294667.296000] Synthesized TLB load handler fastpath (32 instructions).

[4294667.296000] Synthesized TLB store handler fastpath (32 instructions).

[4294667.296000] Synthesized TLB modify handler fastpath (31 instructions).

[4294667.296000] timer irq 67 end 57

[4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[4294667.296000] Found MIPS counter frequency: 149 Mhz

[4294667.296000] Using 148.501 MHz high precision timer.

[4294667.296000] Console: colour dummy device 80x25

[4294667.296000] ################## brcm_serial_console_init, sercon=80301da0

[4294667.369000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

[4294667.378000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

[4294667.412000] Memory: 145664k/262144k available (2685k kernel code, 116412k reserved, 594k data, 128k init, 0k highmem)

[4294667.446000] Mount-cache hash table entries: 512

[4294667.452000] Checking for 'wait' instruction... available.

[4294667.461000] NET: Registered protocol family 16

[4294667.467000] registering PCI controller with io_map_base unset

[4294667.473000] registering PCI controller with io_map_base unset

[4294667.481000] SCSI subsystem initialized

[4294667.486000] usbcore: registered new driver usbfs

[4294667.491000] usbcore: registered new driver hub

[4294667.497000] SATA: Primary Bus Master Status Register offset = b0520000 +

Sie müssen registriert sein, um Links zu sehen.

= b0520300

[4294667.506000] SATA: before init Primary Bus Master Status reg = 0x00000000.

[4294667.513000] SATA: after init Primary Bus Master Status reg = 0x00000020.

[4294667.522000] NET: Registered protocol family 2

[4294667.535000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

[4294667.543000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)

[4294667.551000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[4294667.558000] TCP: Hash tables configured (established 8192 bind 4096)

[4294667.565000] TCP reno registered

[4294667.573000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.

[4294667.580000] Initializing Cryptographic API

[4294667.585000] io scheduler noop registered

[4294667.589000] io scheduler anticipatory registered (default)

[4294667.595000] io scheduler deadline registered

[4294667.599000] io scheduler cfq registered

[4294667.612000] Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PCI enabled

[4294667.634000] Broadcom BCM7401 P31 Ethernet Network Device v2.0 Sep 29 2011 12:55:21

[4294667.642000] SUNDRY revision = 74010021, have IP Hdr Opt=1

[4294667.655000] Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)

[4294669.310000] ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42

[4294669.318000] scsi0 : sata_svw

[4294669.625000] ata1: SATA link down (SStatus 4 SControl 300)

[4294669.630000] ATA: abnormal status 0x7F on port 0xb051001c

[4294669.668000] Broadcom STB NAND controller (BrcmNand Controller)

[4294669.674000] B4: NandSelect=40000002, nandConfig=

Sie müssen registriert sein, um Links zu sehen.

, chipSelect=1

[4294669.681000] brcmnand_probe: CS1: dev_id=ad76ad76

[4294669.686000] After: NandSelect=40000002, nandConfig=

Sie müssen registriert sein, um Links zu sehen.

[4294669.692000] NAND Config: Reg=

Sie müssen registriert sein, um Links zu sehen.

, chipSize=64 MB, blockSize=16K, erase_shift=e

[4294669.700000] busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff

[4294669.707000] timing1 not adjusted: 5363444f

[4294669.711000] timing2 not adjusted: 00000fc6

[4294669.716000] BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB

[4294669.722000]

[4294669.722000] Found NAND: ACC=e3000000, cfg=

Sie müssen registriert sein, um Links zu sehen.

, flashId=ad76ad76, tim1=5363444f, tim2=00000fc6

[4294669.733000] BrcmNAND version = 0x0001 64MB @00000000

[4294669.738000] Found NAND chip on Chip Select 1, chipSize=64MB, usable size=64MB, base=14000000

[4294669.747000] ACC_CONTROL B4: e3000000

[4294669.751000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shift=14

[4294669.759000] Brcm NAND controller version = 0.1 NAND flash size 64MB @14000000

[4294669.766000] mtd->oobsize=16, mtd->eccOobSize=16

[4294669.771000] brcmnand_scan: mtd->oobsize=16

[4294669.775000] brcmnand_scan: oobavail=12, eccsize=512, writesize=512

[4294669.782000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel=15, eccbytes=3

[4294669.790000] brcmnand_default_bbt: bbt_td = bbt_main_descr

[4294669.805000] Bad block table Bbt0 not found for chip 0

[4294669.819000] Bad block table 1tbB not found for chip 0

[4294669.824000] Scanning device for bad blocks, options=

Sie müssen registriert sein, um Links zu sehen.

[4294670.022000] -->brcmnand_isbad_raw(offs=3ffc000

[4294670.029000] -->brcmnand_isbad_raw(offs=3ff8000

[4294670.036000] brcmnandCET: Did not find CET, recreating

[4294670.044000] brcmnandCET: Status -> Deferred

[4294670.048000] numchips=1, size=4000000

[4294670.052000] Creating 4 MTD partitions on "bcm7xxx-nand.0":

[4294670.058000] 0x0000000000000000-0x0000000004000000 : "complete"

[4294670.068000] 0x0000000000000000-0x0000000000040000 : "loader"

[4294670.074000] 0x0000000000040000-0x0000000000400000 : "boot partition"

[4294670.082000] 0x0000000000400000-0x0000000004000000 : "root partition"

[4294670.092000] ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)

[4294670.098000] 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm-0)

[4294670.107000] drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller

[4294670.114000] - USB h/w setup mode <B>

[4294670.114000] - USB power enable set for active LOW mode

[4294670.124000] brcm-ehci brcm-ehci.0: BRCM EHCI

[4294670.129000] brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1

[4294670.136000] brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300

[4294670.143000] brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004

[4294670.151000] usb usb1: configuration #1 chosen from 1 choice

[4294670.158000] hub 1-0:1.0: USB hub found

[4294670.162000] hub 1-0:1.0: 2 ports detected

[4294670.267000] ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)

[4294670.274000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)

[4294670.282000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

[4294670.289000] - Resetting at b0480408

[4294670.293000] <-- brcm_start_hc

[4294670.296000] brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI

[4294670.302000] brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2

[4294670.310000] brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400

[4294670.371000] usb usb2: configuration #1 chosen from 1 choice

[4294670.377000] hub 2-0:1.0: USB hub found

[4294670.382000] hub 2-0:1.0: 2 ports detected

[4294670.487000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)

[4294670.496000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller

[4294670.503000] - Resetting at b0480508

[4294670.507000] <-- brcm_start_hc

[4294670.510000] brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI

[4294670.515000] brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3

[4294670.523000] brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500

[4294670.585000] usb usb3: configuration #1 chosen from 1 choice

[4294670.591000] hub 3-0:1.0: USB hub found

[4294670.596000] hub 3-0:1.0: 2 ports detected

[4294670.701000] Initializing USB Mass Storage driver...

[4294670.707000] usbcore: registered new driver usb-storage

[4294670.712000] USB Mass Storage support registered.

[4294670.717000] i2c /dev entries driver

[4294670.721000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC).

[4294670.731000] ALSA device list:

[4294670.734000] No soundcards found.

[4294670.738000] TCP bic registered

[4294670.742000] NET: Registered protocol family 1

[4294670.746000] NET: Registered protocol family 17

[4294672.254000] Sending DHCP requests ., OK

[4294673.267000] IP-Config: Got DHCP answer from 192.168.178.1, my address is

Sie müssen registriert sein, um Links zu sehen.

[4294673.276000] IP-Config: Complete:

[4294673.279000] device=eth0, addr=

Sie müssen registriert sein, um Links zu sehen.

, mask=255.255.255.0, gw=192.168.178.1,

[4294673.288000] host=

Sie müssen registriert sein, um Links zu sehen.

, domain=fritz.box, nis-domain=(none),

[4294673.295000] bootserver=192.168.178.1, rootserver=192.168.178.1, rootpath=

[4294680.998000] VFS: Mounted root (jffs2 filesystem).

[4294681.005000] Freeing unused kernel memory: 128k freed


INIT: version 2.86 booting

[4294685.573000] stb_core: module license 'Proprietary' taints kernel.

[4294686.036000] 4013707 ms:

[4294686.421000] 382 ms: 27 Starting /etc/rcS.d/S02sysfs...

[4294686.452000] 25 ms: =s

Startting the hotplug events dispatcher
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
done
[4294694.641000] 8187 ms: 29 Starting /etc/rcS.d/S03udev...

[4294694.671000] 25 ms: =s

[4294694.699000] 26 ms: 31 Starting /etc/rcS.d/S04bootup...

[4294694.706000] 2 ms: 10

[4294695.164000] 455 ms: 12

[4294695.191000] 24 ms: 14

[4294695.230000] 36 ms: 15

/dev/sda: No such file or direc[4294695.294000] 61 ms: 16

tory
/dev/sda: No such file or dire[4294695.319000] 22 ms: 17

ctory
[4294695.362000] input: dreambox remote control (native) as /class/input/input0

[4294695.370000] input: dreambox advanced remote control (native) as /class/input/input1

[4294695.422000] input: dreambox ir keyboard as /class/input/input2

[4294695.428000] input: dreambox ir mouse as /class/input/input3

[4294697.729000] enter base init, xvd 20090807, vdc 20080313, rap 20090430, xpt 20080313

[4294697.738000] kernMemSize : 148 MB

[4294697.753000] 30:457024000 SMCA: controller reset timed out

[4294700.285000] register adapter

[4294700.288000] register adapter

[4294700.292000] register adapter

[4294700.295000] register adapter

[4294700.299000] register adapter

[4294700.303000] input: dreambox front panel as /class/input/input4

[4294700.333000] HDMI: no device attached

[4294700.337000] set sb to 3(2)

[4294700.340000] set fb to 2(-1)

[4294700.343000] set input to 0

[4294700.346000] set fb to 2(-1)

[4294700.351000] bcm_video_analog_port_setup (fmt=6)

[4294700.356000] SET FORMAT: display[1], format=6

[4294700.361000] display 0 uses vbi path 1

[4294700.365000] display 1 uses vbi path 0

[4294700.369000] HDMI: hotplug handler!

[4294700.373000] HDMI: no device attached

[4294700.377000] using 50.00Hz as MonitorRefreshRate

[4294700.381000] SET FORMAT: display[0], format=24

[4294700.386000] set fb to 2(0)

[4294700.389000] bcm_video_analog_port_setup (fmt=6)

[4294700.394000] SET FORMAT: display[1], format=6

[4294700.440000] disable wss on display 0

[4294700.444000] disable wss on display 1

[4294700.448000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)

[4294700.651000] enable mad

[4294700.720000] VIDEO0: set fallback framerate to 60000

[4294700.725000] VIDEO0: set progressive override mode to 1

[4294700.731000] VIDEO0: set streamtype!

[4294700.734000] set MPEG2

[4294700.737000] sw rave disabled!

[4294700.746000] sync is off so we enable it

[4294700.750000] playback!

[4294700.753000] total video delay: 0 (0 ms)

[4294700.765000] VIDEO0: start decode

[4294700.768000] flush video decoder

[4294700.772000] VIDEO0 got pts failed !!!! (ret 0)

u[4294704.964000] set ac3 to downmix

[4294704.967000] set aac to downmix

[4294708.794000] VIDEO0: first pts 0x0

devd-event[336]: node_symlink: rename(/dev/fb.udev-tmp, /dev/fb) failed: Is a directory


[4294719.919000] init ALSA!

[4294723.653000] DVB: registering new adapter (BCM7401)

[4294738.609000] autodetecting NIMs...

[4294746.082000] ret: -145, feid: 00

[4294746.086000] registered vtuner vtuner0, minor 60

[4294749.819000] registered vtuner vtuner1, minor 59

 

[ersin328]

AW: DM800 HD (org) bootet nicht!

welchen dream hast du ? 800hd oder 800hd se ?

 

[chiefobrei]

AW: DM800 HD (org) bootet nicht!

Wenn du noch Garantie haben solltest , dann mach ein Ticket auf bei DMM.

Sonst hier reparieren lassen:

Sie müssen registriert sein, um Links zu sehen.

 

[fetti67]

AW: DM800 HD (org) bootet nicht!

...DM800HD PVR (original von Dream Multimedia)...

 

[ersin328]

AW: DM800 HD (org) bootet nicht!

speicher chip defekt .

 

[specter13]

AW: DM800 HD (org) bootet nicht!

Habe hier ne DM800 ORIGINAL von nem Kumpel.

Sympton-> Fahrt nicht hoch

Habe schon diverse Images NEU geflasht per 0Modem und WebIF ohne erfolg
Tuner , Display entfernt, Hilft auch nix

Vielleicht jemand ne Idee bevor sie in die Tonne wandert

LOG

Spoiler

(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800
FIRST STAGE 1.00 {BO23456}


2ND STAGE OK, build #84 (2011-09-02)


0.000 - BCM board setup
{00000126,00000126,00000125,00000124,00000123,00000133}
0.007 - fp init
0.008 - ca init
0.732 - load config
0.760 - config loaded.
* press to enter setup
OLED found!
lcd: BOOT #84
- read config file: /boot/secondstage.conf
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
dreamupd initialized
Scanning JFFS2 FS: . done.
find_inode failed for name=secondstage.conf
load: Failed to find inode
- failed to open /boot/secondstage.conf
- failed to open /cf/autorun.bat
lcd: /boot/bootlogo-dm800.elf.gz
bootlogo size: 59978
no HDMI device detected
no HDMI mode available, reverting to 720p
using 1280x720p (60.00 Hz)
HDMI
using colorspace: 0
create surface 1280 720
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
lard.org>
parsing JPEG header..
Virtual FB Size: 1280x720
lcd: /boot/vmlinux-2.6.18-7.4-dm800.gz
<5>Linux version 2.6.18-7.4-dm800 (oozoon@oozoon) (gcc version 4.6.4 20120303 (p
rerelease) (GCC) ) #1 Sun Sep 29 11:46:55 CEST 2013
Fetching vars from bootloader... none present, using defaults.
board_init_once: regval=44ac6502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw console=null debug
2 831ffebc 83029b34
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=0
CPU revision is: 00020000
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 148
User-defined physical RAM map:
node [00000000, 09400000: RAM]
node [09400000, 06c00000: RSVD]
<5>Reserving 108 MB upper memory starting at 09400000
<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pages: 65536
<5>Kernel command line: console=ttyS0,115200 ip=dhcp root=/dev/nfs rw
before init RAC 0x02a00000 0x00000000
after init RAC 0x02a0000f 0x0fff0000
[4294667.296000] Primary instruction cache 32kB, physically tagged, 2-way, lines
ize 16 bytes.
[4294667.296000] Primary data cache 32kB, 2-way, linesize 16 bytes.
[4294667.296000] Synthesized TLB refill handler (20 instructions).
[4294667.296000] Synthesized TLB load handler fastpath (32 instructions).
[4294667.296000] Synthesized TLB store handler fastpath (32 instructions).
[4294667.296000] Synthesized TLB modify handler fastpath (31 instructions).
[4294667.296000] timer irq 67 end 57
[4294667.296000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[4294667.296000] Found MIPS counter frequency: 149 Mhz
[4294667.296000] Using 148.501 MHz high precision timer.
[4294667.296000] Console: colour dummy device 80x25
[4294667.296000] ################## brcm_serial_console_init, sercon=803809f0
[4294667.369000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)


[4294667.378000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[4294667.412000] Memory: 145152k/262144k available (3149k kernel code, 116932k r
eserved, 650k data, 128k init, 0k highmem)
[4294667.445000] Mount-cache hash table entries: 512
[4294667.451000] Checking for 'wait' instruction... available.
[4294667.460000] NET: Registered protocol family 16
[4294667.466000] registering PCI controller with io_map_base unset
[4294667.472000] registering PCI controller with io_map_base unset
[4294667.480000] SCSI subsystem initialized
[4294667.484000] usbcore: registered new driver usbfs
[4294667.490000] usbcore: registered new driver hub
[4294667.496000] SATA: Primary Bus Master Status Register offset = b0520000 + 00
000300 = b0520300
[4294667.504000] SATA: before init Primary Bus Master Status reg = 0x00000000.
[4294667.511000] SATA: after init Primary Bus Master Status reg = 0x00000020.
[4294667.520000] NET: Registered protocol family 2
[4294667.534000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[4294667.542000] TCP established hash table entries: 8192 (order: 3, 32768 bytes
)
[4294667.550000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[4294667.557000] TCP: Hash tables configured (established 8192 bind 4096)
[4294667.564000] TCP reno registered
[4294667.572000] JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
[4294667.579000] fuse init (API version 7.7)
[4294667.584000] SGI XFS with large block numbers, no debug enabled
[4294667.591000] Initializing Cryptographic API
[4294667.596000] io scheduler noop registered
[4294667.600000] io scheduler anticipatory registered (default)
[4294667.606000] io scheduler deadline registered
[4294667.610000] io scheduler cfq registered
[4294667.623000] Broadcom serial driver version 1.00 (2000-11-09) with SERIAL_PC
I enabled
[4294667.647000] loop: loaded (max 8 devices)
[4294667.651000] Broadcom BCM7401 P31 Ethernet Network Device v2.0 Sep 29 2013 1
1:46:31
[4294667.659000] SUNDRY revision = 74010021, have IP Hdr Opt=1
[4294667.672000] Config Internal PHY Through MDIO: 100 MB Full-Duplex (auto-neg)


[4294669.369000] ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB
0510030 irq 42
[4294669.378000] scsi0 : sata_svw
[4294669.684000] ata1: SATA link down (SStatus 4 SControl 300)
[4294669.689000] ATA: abnormal status 0x7F on port 0xb051001c
[4294669.727000] block2mtd: version $Revision: 1.30 $
[4294669.732000] Broadcom STB NAND controller (BrcmNand Controller)
[4294669.738000] B4: NandSelect=40000002, nandConfig=04042300, chipSelect=1
[4294669.745000] brcmnand_probe: CS1: dev_id=ad76ad76
[4294669.750000] After: NandSelect=40000002, nandConfig=04042300
[4294669.756000] NAND Config: Reg=04042300, chipSize=64 MB, blockSize=16K, erase
_shift=e
[4294669.764000] busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff
[4294669.771000] timing1 not adjusted: 5363444f
[4294669.775000] timing2 not adjusted: 00000fc6
[4294669.780000] BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB
[4294669.786000]
[4294669.786000] Found NAND: ACC=e3000000, cfg=04042300, flashId=ad76ad76, tim1=
5363444f, tim2=00000fc6
[4294669.797000] BrcmNAND version = 0x0001 64MB @00000000
[4294669.802000] Found NAND chip on Chip Select 1, chipSize=64MB, usable size=64
MB, base=14000000
[4294669.811000] ACC_CONTROL B4: e3000000
[4294669.815000] page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shi
ft=14
[4294669.822000] Brcm NAND controller version = 0.1 NAND flash size 64MB @140000
00
[4294669.830000] mtd->oobsize=16, mtd->eccOobSize=16
[4294669.835000] brcmnand_scan: mtd->oobsize=16
[4294669.839000] brcmnand_scan: oobavail=12, eccsize=512, writesize=512
[4294669.846000] brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel
=15, eccbytes=3
[4294669.854000] brcmnand_default_bbt: bbt_td = bbt_main_descr
[4294669.862000] brcmnandCET: Status -> Deferred
[4294669.866000] numchips=1, size=4000000
[4294669.870000] Creating 4 MTD partitions on "bcm7xxx-nand.0":
[4294669.876000] 0x0000000000000000-0x0000000004000000 : "complete"
[4294669.886000] 0x0000000000000000-0x0000000000040000 : "loader"
[4294669.892000] 0x0000000000040000-0x0000000000400000 : "boot partition"
[4294669.899000] 0x0000000000400000-0x0000000004000000 : "root partition"
[4294669.909000] ehci_hcd_brcm_init: Initializing 1 EHCI controller(s)
[4294669.916000] 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (E
HCI-brcm-0)
[4294669.924000] drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller


[4294669.932000] - USB h/w setup mode <B>
[4294669.932000] - USB power enable set for active LOW mode
[4294669.941000] brcm-ehci brcm-ehci.0: BRCM EHCI
[4294669.946000] brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus num
ber 1
[4294669.954000] brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
[4294669.960000] brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 De
c 2004
[4294669.969000] usb usb1: configuration #1 chosen from 1 choice
[4294669.975000] hub 1-0:1.0: USB hub found
[4294669.979000] hub 1-0:1.0: 2 ports detected
[4294670.084000] ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
[4294670.091000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHC
I-brcm-0)
[4294670.099000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller


[4294670.106000] - Resetting at b0480408
[4294670.110000] <-- brcm_start_hc
[4294670.113000] brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
[4294670.118000] brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus
number 2
[4294670.127000] brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
[4294670.188000] usb usb2: configuration #1 chosen from 1 choice
[4294670.194000] hub 2-0:1.0: USB hub found
[4294670.198000] hub 2-0:1.0: 2 ports detected
[4294670.304000] 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHC
I-brcm-1)
[4294670.313000] drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller


[4294670.320000] - Resetting at b0480508
[4294670.324000] <-- brcm_start_hc
[4294670.327000] brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
[4294670.332000] brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus
number 3
[4294670.340000] brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480500
[4294670.402000] usb usb3: configuration #1 chosen from 1 choice
[4294670.408000] hub 3-0:1.0: USB hub found
[4294670.412000] hub 3-0:1.0: 2 ports detected
[4294670.518000] Initializing USB Mass Storage driver...
[4294670.523000] usbcore: registered new driver usb-storage
[4294670.529000] USB Mass Storage support registered.
[4294670.534000] i2c /dev entries driver
[4294670.538000] Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu
Jun 22 13:55:50 2006 UTC).
[4294670.548000] ALSA device list:
[4294670.551000] No soundcards found.
[4294670.555000] TCP bic registered
[4294670.558000] NET: Registered protocol family 1
[4294670.563000] NET: Registered protocol family 17
[4294672.071000] Sending DHCP requests ., OK
[4294672.083000] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.
168.0.114
[4294672.092000] IP-Config: Complete:
[4294672.095000] device=eth0, addr=192.168.0.114, mask=255.255.255.0, gw=1
92.168.0.1,
[4294672.103000] host=192.168.0.114, domain=, nis-domain=(none),
[4294672.110000] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[4294672.118000] Looking up port of RPC 100003/2 on 192.168.0.1
[4294707.124000] portmap: server 192.168.0.1 not responding, timed out
[4294707.130000] Root-NFS: Unable to get nfsd port number from server, using def
ault
[4294707.138000] Looking up port of RPC 100005/1 on 192.168.0.1
[4294742.144000] portmap: server 192.168.0.1 not responding, timed out
[4294742.150000] Root-NFS: Unable to get mountd port number from server, using d
efault
[4294777.158000] mount: server 192.168.0.1 not responding, timed out
[4294777.164000] Root-NFS: Server returned error -5 while mounting /tftpboot/192
.168.0.114
[4294777.172000] VFS: Unable to mount root fs via NFS, trying floppy.
[4294777.180000] VFS: Cannot open root device "nfs" or unknown-block(2,0)
[4294777.187000] Please append a correct "root=" boot option
[4294777.192000] Kernel panic - not syncing: VFS: Unable to mount root fs on unk
nown-block(2,0)
[4294777.201000] <0>Rebooting in 180 seconds..

 

[Karl-Hein]

AW: DM800 HD (org) bootet nicht!

Versuche das Bios auf Werkseinstellungen zurückzusetzen (Reset all settings to default oder so ähnlich) und anschließend mit Dreamup 1_3_3_11 + Bad Sector Repair ein aktuelles DMM Images zu flashen !

Link ist nicht mehr aktiv.

 

[Thueringer]

AW: DM800 HD (org) bootet nicht!

Ich gehe mal davon aus, das der Secondageloader nicht richtig drauf ist und er die Image per Web aufspielt. Da bleibtr das problem immer bestehen.

Wenn du das Image mal mit dem DreamUp ( verbunden mit Netzwerk und Nullmodemkabel) aufspielst, ist der Secondageloader mit enthalten.

Dann müßte es klappen.



Frage: Was zeigt sie denn im Display an, wenn sie startet?

 

[specter13]

AW: DM800 HD (org) bootet nicht!

so hab nun mal ein OoZooN und ein Newnigma2 alles frisch von deren HP geladen versucht.
Box im BIOS alles auf werkseinstellungen gesetzt.

Geflasht mit DreamUp v1.3.3.11 + recover bad sectors aktiviert.
Beide bleiben stehen wie im obigem log.

Im display steht:

Dream
Multimedia

dhcp ...
.4-dm800-szux-2.6.18

 

[Karl-Hein]

AW: DM800 HD (org) bootet nicht!

Irgendwelche Medien an/in der Box ? Alles entfernen auch den Tuner !
Oder Karte in der Box ? Entfernen !
Anderes Netzteil testen ...

 

[specter13]

AW: DM800 HD (org) bootet nicht!

Schon lange versucht. Keine Besserung.
Keine Festplatte oder sonstiges an der Box drann nur LAN und HDIM Kabel.

Fällt mir nur noch ein direkt von nem USB Stick zu Booten um zu sehen obs am Speiccher der Box liegt.

Jemand schon sowas versucht?

Sie müssen registriert sein, um Links zu sehen.

 

[Karl-Hein]

AW: DM800 HD (org) bootet nicht!

Du könntest bei DMM ein Ticket aufmachen und für "Versandkosten" dir von DMM ein Kostenvoranschlag zukommen lassen. Wenn zu teuer Box zurück ...

 

[Thueringer]

AW: DM800 HD (org) bootet nicht!

so hab nun mal ein OoZooN und ein Newnigma2 alles frisch von deren HP geladen versucht.
Box im BIOS alles auf werkseinstellungen gesetzt.

Geflasht mit DreamUp v1.3.3.11 + recover bad sectors aktiviert.
Beide bleiben stehen wie im obigem log.

Im display steht:

Dream
Multimedia

dhcp ...
.4-dm800-szux-2.6.18

Hast du das orginale dreamUp genutz?


Wie bist du dann Vorgegamgen?

Hast du Netzwerk und Nullmodemkabel angeschlossen?

Was zeigt der Status in DreamUp an? Mache dann aml ein Bild und Poste es mal.

 

[specter13]

AW: DM800 HD (org) bootet nicht!

Offiziel DreamUp version bei DreamMultimedia gedownloadet.

MIt 0Modem und LAN KAbel box verbunden

- Box vom Strom genommen
- DreamUp 1.3.3.11 gestartet
- Häkchen bei Use Network
- Com Port gewählt
- Auf connect geklickt
- Box mit Strom versorgt
- Flash und dann image ausgweählt.

Sie müssen registriert sein, um Links zu sehen.

PS: Mit

Sie müssen registriert sein, um Links zu sehen.

das selbe Problem.