DM 7020 HDv2 hängt beim booten bei dhcp...

[Browser1]

Hallo

Ich habe eine neue DM 7020 HDv2 mit dem aktuellem "dreambox-image-dm7020hdv2-20161019.nfi" geflasht. Nach dem reboot kann ich alles einstellen und dann funktioniert die Box auch , aber wenn ich neu Starte bleib sie gleich am Anfang beim booten hängen. Am Box Display steht dann dhcp... und die Image Version.
Habe die Netzwerk Einstellungen geteste Alles OK
Ich habe schon einige male neu geflasht aber immer dasselbe Problem.
Das Original Image von DM "release-dm7020hdv2-4.0.0.nfi" lässt sich auch nicht mehr installieren, da bekomme ich die Fehlermeldung "INVALID IMAGE (YOU NEED A IMAGE WITH AT LEAST 2ND #89)"

Spoiler

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.01.27 19:14:54 =~=~=~=~=~=~=~=~=~=~=~=

BCM74130011
012
K1
K2
K3
K4
K5
Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000005
WC1=FFFFFFEE
RC2=00000015
WC2=00000037
RC3=0000000D
WC3=FFFFFFEE
RC4=0000000D
WC4=00000037
NWC=00000012
RC5=00000005
WC5=00000012
RC6=00000015
WC6=00000012
NRC=0000000D
RW=00000011
WW=0000004A
G=00000000 R=0000000D W=00000012
BL=00000000
RC1=00000003
RC2=00000014
BL=00000001
RC1=00000002
RC2=00000014
BL=00000002
RC1=00000006
RC2=00000012
BL=00000003
RC1=00000008
RC2=00000014
BL=00000004
RC1=00000001
RC2=00000012
BL=00000005
RC1=00000004
RC2=00000018
BL=00000006
RC1=00000007
RC2=00000016
BL=00000007
RC1=00000009
RC2=0000001B
3
COPY CODE
COMPARE CODE
4567
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox D M7020HD
FIRST STAGE 1.4/400 {BO23456}
[m
2ND STAGE OK, build #89 (2015-03-09)
0.000 - BCM board setup
0.002 - fp init
FP version 6 detected
0.003 - ca init
0.499 - load config
0.525 - config loaded.
* press to enter setup
OLED found!
lcd: BOOT #89
P23 detected!
detected 4K pagesize, 256K blocksize
- read config file: /boot/secondstage.conf
detected jffs2 blocksize: 128kb
+++++++++++++++++++++++++UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
dreamupd initialized
Scanning JFFS2 FS: . | / - \ | / - \ | / - \ done.
find_inode failed for name=secondstage.conf
load: Failed to find inode
- failed to open /boot/secondstage.conf
- failed to open /cf/autorun.bat
lcd: /boot/bootlogo-dm7020hd.elf.gz
bootlogo size: 74862
no HDMI device detected
no HDMI mode available, reverting to 720p
using 1280x720p (60.00 Hz)
HDMI
using colorspace: 0
create surface 1280 720
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@saillard.org>
parsing JPEG header..
Virtual FB Size: 1280x720
lcd: /boot/vmlinux-3.2-dm7020hd.gz
[ 0.000000] Linux version 3.2-dm7020hd (oe@porky.dream-property.net) (gcc version 4.6.4 20120303 (prerelease) (GCC) ) #1 SMP Mon Mar 16 21:23:22 UTC 2015
[ 0.000000] Fetching vars from bootloader...
[ 0.000000] Early serial console at MMIO32 0x10400b00 (options '1000000n8')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Options: sata=1 enet=1 emac_1=0 no_mdio=0 docsis=0 pci=1 smp=1 moca=0 usb=1
[ 0.000000] Using 512 MB RAM (from straps)
[ 0.000000] Fetch var 'memsize' = '64'
[ 0.000000] CPU revision is: 0002a044 (Brcm4380)
[ 0.000000] FPU revision is: 00130001
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 10000000 @ 00000000 (usable)
[ 0.000000] memory: 10000000 @ 20000000 (usable)
[ 0.000000] bmem: adding 58 MB LINUX region at 5 MB (0x03a06000@0x005fa000)
[ 0.000000] bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
[ 0.000000] bmem: adding 256 MB LINUX region at 512 MB (0x10000000@0x20000000)
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x00030000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00010000
[ 0.000000] 0: 0x00020000 -> 0x00030000
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129536 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 7 pages/cpu @81407000 s5440 r8192 d15040 u32768
[ 0.000000] pcpu-alloc: s5440 r8192 d15040 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129536
[ 0.000000] Kernel command line: ubi.mtd=root root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200 debug bmem=192M@64M
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[ 0.000000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
[ 0.000000] Memory: 316976k/524288k available (4755k kernel code, 207312k reserved, 1008k data, 224k init, 0k highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Measuring MIPS counter frequency...
[ 0.000000] Detected MIPS clock frequency: 405 MHz (202.505 MHz counter)
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
[ 0.011000] pid_max: default: 32768 minimum: 301
[ 0.012000] Mount-cache hash table entries: 512
[ 0.014000] SMP: Booting CPU1...
[ 0.015000] Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes.
[ 0.015000] Primary data cache 64kB, 4-way, VIPT, cache aliases, linesize 64 bytes
[ 0.016000] CPU revision is: 0002a044 (Brcm4380)
[ 0.016000] FPU revision is: 00130001
[ 0.026000] SMP: CPU1 is running
[ 0.026000] Brought up 2 CPUs
[ 0.027000] devtmpfs: initialized
[ 0.031000] NET: Registered protocol family 16
[ 0.033000] PCI2.3->SDRAM window: 512 MB
[ 0.040000] bio: create slab <bio-0> at 0
[ 0.042000] SCSI subsystem initialized
[ 0.042000] libata version 3.00 loaded.
[ 0.043000] usbcore: registered new interface driver usbfs
[ 0.043000] usbcore: registered new interface driver hub
[ 0.044000] usbcore: registered new device driver usb
[ 0.045000] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.046000] pci 0000:01:00.0: [14e4:8602] type 0 class 0x000101
[ 0.047000] PCI: found device 14e4:8602 on SATA bus, slot 0 (irq 42)
[ 0.047000] pci 0000:01:00.0: reg 24: [mem 0x00000000-0x00000fff]
[ 0.048000] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x000007ff pref]
[ 0.049000] pci 0000:01:00.0: BAR 5: assigned [mem 0x10510000-0x10510fff]
[ 0.050000] pci 0000:01:00.0: BAR 5: set to [mem 0x10510000-0x10510fff] (PCI address [0x10510000-0x10510fff])
[ 0.051000] pci 0000:01:00.0: BAR 6: assigned [mem 0x10511000-0x105117ff pref]
[ 0.052000] Switching to clocksource upg
[ 0.065000] NET: Registered protocol family 2
[ 0.097000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.099000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.101000] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.102000] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.103000] TCP reno registered
[ 0.104000] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.105000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.106000] NET: Registered protocol family 1
[ 0.107000] RPC: Registered named UNIX socket transport module.
[ 0.108000] RPC: Registered udp transport module.
[ 0.108000] RPC: Registered tcp transport module.
[ 0.109000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.110000] PCI: CLS 0 bytes, default 64
[ 0.113000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 0.115000] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.118000] msgmni has been set to 619
[ 0.119000] io scheduler noop registered
[ 0.120000] io scheduler cfq registered (default)
[ 0.121000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
ÿ[ 0.143000] serial8250.0: ttyS0 at MMIO 0x10400b00 (irq = 22) is a 16550A
[ 0.144000] console [ttyS0] enabled, bootconsole disabled
[ 0.144000] console [ttyS0] enabled, bootconsole disabled
[ 0.166000] serial8250.0: ttyS1 at MMIO 0x10400b80 (irq = 67) is a 16550A
[ 0.169000] loop: module loaded
[ 0.169000] sata_brcmstb 0000:01:00.0: version 4.0
[ 0.170000] brcm-pm: enabling sata clocks
[ 0.171000] PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
[ 0.171000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 0.369000] scsi0 : sata_brcmstb
[ 0.370000] scsi1 : sata_brcmstb
[ 0.371000] ata1: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510000 irq 42
[ 0.372000] ata2: SATA max UDMA7 mmio m4096@0x10510000 port 0x10510100 irq 42
[ 0.374000] Broadcom STB NAND controller (BrcmNand Controller)
[ 0.374000] bcmemac: Broadcom STB 10/100 EMAC driver v3.0
[ 0.378000] bcmemac: registered interface #0 at 0x10080000 as 'eth0' (00:09:34:2f:7c:1d)
[ 0.379000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.380000] brcm-pm: enabling usb clocks
[ 0.380000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
[ 0.381000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
[ 0.413000] ehci-brcm ehci-brcm.0: irq 62, io mem 0x10480300
[ 0.419000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
[ 0.420000] hub 1-0:1.0: USB hub found
[ 0.421000] hub 1-0:1.0: 2 ports detected
[ 0.421000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
[ 0.422000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
[ 0.454000] ehci-brcm ehci-brcm.1: irq 57, io mem 0x10480500
[ 0.460000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
[ 0.461000] hub 2-0:1.0: USB hub found
[ 0.461000] hub 2-0:1.0: 2 ports detected
[ 0.462000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.463000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
[ 0.464000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 3
[ 0.465000] ohci-brcm ohci-brcm.0: irq 63, io mem 0x10480400
[ 0.530000] hub 3-0:1.0: USB hub found
[ 0.531000] hub 3-0:1.0: 2 ports detected
[ 0.532000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
[ 0.532000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 4
[ 0.533000] ohci-brcm ohci-brcm.1: irq 64, io mem 0x10480600
[ 0.599000] hub 4-0:1.0: USB hub found
[ 0.600000] hub 4-0:1.0: 2 ports detected
[ 0.601000] Initializing USB Mass Storage driver...
[ 0.602000] usbcore: registered new interface driver usb-storage
[ 0.602000] USB Mass Storage support registered.
[ 0.603000] i2c /dev entries driver
[ 0.603000] ALSA device list:
[ 0.604000] No soundcards found.
[ 0.605000] TCP cubic registered
[ 0.605000] NET: Registered protocol family 17
[ 0.606000] Registering the dns_resolver key type
[ 0.606000] EBI CS1: setting up NAND flash (primary)
[ 0.608000] mtd->oobsize=0, mtd->eccOobSize=0
[ 0.608000] NAND_CS_NAND_XOR=00000000
[ 0.609000] B4: NandSelect=00000202, nandConfig=17152300, chipSelect=1
[ 0.609000] brcmnand_read_id: CS1: dev_id=98d39026
[ 0.610000] After: NandSelect=40000200, nandConfig=17152300
[ 0.611000] brcmnand_probe: Ecc level set to 4, sectorSize=512 from ID table
[ 0.611000] Block size=00020000, erase shift=17
[ 0.612000] NAND Config: Reg=17152300, chipSize=512 MB, blockSize=128K, erase_shift=11
[ 0.613000] busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff
[ 0.614000] timing1 not adjusted: 5363444f
[ 0.614000] timing2 not adjusted: 00000fc6
[ 0.615000] eccLevel=4, 1Ksector=0, oob=16
[ 0.615000] nbrBitsPerCell=2, cellinfo=0, chip->cellinfo=00000000
[ 0.616000] <--brcmnand_set_acccontrol: acc b4: f7441010, after: f7441010
[ 0.617000] BrcmNAND mfg 98 d3 TOSHIBA TC58NVG3S0ETA00 512MB on CS1
[ 0.618000]
[ 0.618000] Found NAND on CS1: ACC=f7441010, cfg=17152300, flashId=98d39026, tim1=5363444f, tim2=00000fc6
[ 0.619000] BrcmNAND version = 0x0302 512MB @00000000
[ 0.619000] B4: NandSelect=40000200, nandConfig=17152300, chipSelect=1
[ 0.620000] brcmnand_read_id: CS1: dev_id=98d39026
[ 0.621000] After: NandSelect=40000200, nandConfig=17152300
[ 0.621000] Found NAND flash on Chip Select 1, chipSize=512MB, usable size=512MB, base=0
[ 0.622000] brcmnand_scan: B4 nand_select = 40000200
[ 0.623000] brcmnand_scan: After nand_select = 40000200
[ 0.624000] ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16
[ 0.624000] handle_acc_control: CORR ERR threshold set to 3 bits
[ 0.625000] page_shift=11, bbt_erase_shift=17, chip_shift=29, phys_erase_shift=17
[ 0.626000] Brcm NAND controller version = 3.2 NAND flash size 512MB @00000000
[ 0.627000] ECC layout=brcmnand_oob_bch4_2k
[ 0.627000] brcmnand_scan: mtd->oobsize=64
[ 0.628000] brcmnand_scan: oobavail=35, eccsize=512, writesize=2048
[ 0.629000] brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=4, eccbytes=7
[ 0.630000] -->brcmnand_default_bbt
[ 0.630000] brcmnand_default_bbt: bbt_td = bbt_slc_bch4_main_descr
[ 0.631000] Bad block table Bbt0 found at page 0003ffc0, version 0x01 for chip on CS1
[ 0.632000] Bad block table 1tbB found at page 0003ff80, version 0x01 for chip on CS1
[ 0.634000] brcmnandCET: Status -> Deferred
[ 0.635000] Adjust partition complete size from 40000000 to 1ff00000 to avoid overlap with BBT reserved space
[ 0.636000] Adjust partition root size from 3f800000 to 1f700000 to avoid overlap with BBT reserved space
[ 0.638000] Creating 4 MTD partitions on "brcmnand.0":
[ 0.638000] 0x000000000000-0x00001ff00000 : "complete"
[ 0.644000] 0x000000000000-0x000000100000 : "loader"
[ 0.646000] 0x000000100000-0x000000800000 : "boot"
[ 0.648000] 0x000000800000-0x00001ff00000 : "root"
[ 0.656000] UBI: attaching mtd3 to ubi0
[ 0.656000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 0.657000] UBI: logical eraseblock size: 126976 bytes
[ 0.658000] UBI: smallest flash I/O unit: 2048
[ 0.658000] UBI: VID header offset: 2048 (aligned 2048)
[ 0.659000] UBI: data offset: 4096
[ 0.699000] ata1: SATA link down (SStatus 4 SControl 300)
[ 1.026000] ata2: SATA link down (SStatus 4 SControl 300)
[ 1.679000] p8[15]=bf
[ 1.679000] brcmnand_handle_false_read_ecc_unc_errors: Uncorrectable error at offset e1e0800
[ 1.680000] Data:
[ 1.680000]
[ 1.680000] 0000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.682000] 0020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.683000] 0040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.684000] 0060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.685000] 0080: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.686000] 00a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.688000] 00c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.689000] 00e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.690000] 0100: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.691000] 0120: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.693000] 0140: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.694000] 0160: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.695000] 0180: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.696000] 01a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.698000] 01c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.699000] 01e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.700000] Spare Area
[ 1.700000] ffffffff ffffffff ffffffff ffffffbf
[ 1.701000] brcmnand_post_mortem_dump at offset e1e0800
[ 1.702000] Call Trace:
[ 1.702000] [<8049d3d4>] dump_stack+0x8/0x34
[ 1.703000] [<803654f4>] brcmnand_post_mortem_dump+0x54/0x120
[ 1.703000] [<80365db0>] brcmnand_ctrl_posted_read_cache+0x78c/0x91c
[ 1.704000] [<8036252c>] brcmnand_read_page+0x12c/0x25c
[ 1.705000] [<803647b8>] brcmnand_do_read_ops+0x150/0x268
[ 1.705000] [<803649bc>] brcmnand_read+0xec/0x89c
[ 1.706000] [<8035c100>] part_read+0x8c/0x138
[ 1.706000] [<803786e8>] ubi_io_read+0x98/0x1bc
[ 1.707000] [<80378f84>] ubi_io_read_vid_hdr+0x58/0x4bc
[ 1.708000] [<8037cbd4>] ubi_scan+0x388/0xb74
[ 1.708000] [<803731b4>] ubi_attach_mtd_dev+0x5d4/0xbd8
[ 1.709000] [<805b95b4>] ubi_init+0x2e4/0x3f0
[ 1.709000] [<80001570>] do_one_initcall+0x160/0x1f0
[ 1.710000] [<805a39f4>] kernel_init+0xd8/0x160
[ 1.711000] [<80006728>] kernel_thread_helper+0x10/0x18
[ 1.711000]
[ 1.711000] NAND registers snapshot
[ 1.712000]
[ 1.712000] 00002800: 00000302 01000000 00010000 0e1e0800
[ 1.713000] 00002810: 00000000 40000200 00000000 00000000
[ 1.713000] 00002820: ffffffff ffffffff ffffffff ffffffbf
[ 1.714000] 00002830: ffffffff ffffffff ffffffff ffffffff
[ 1.715000] 00002840: f7441010 00000000 17152300 00000000
[ 1.716000] 00002850: 5363444f 00000fc6 00000000 00000000
[ 1.716000] 00002860: 98d39026 76150208 00000000 f0000000
[ 1.717000] 00002870: 00000000 00000000 00000000 00000000
[ 1.718000] 00002880: 00000000 00000003 00000000 00000000
[ 1.718000] 00002890: 00010000 0e1e0800 00000000 00000000
[ 1.719000] 000028a0: 00000000 00000000 00000000 00000000
[ 1.720000] 000028b0: 00000000 00000000 00000000 00000000
[ 1.721000] 000028c0: 00000000
[ 1.721000] brcmnand_read_page: 3: brcmnand_posted_read_cache failed at offset=e1e0800, ret=-77
[ 1.722000] p8[15]=bf
[ 1.723000] brcmnand_handle_false_read_ecc_unc_errors: Uncorrectable error at offset e1e0800
[ 1.724000] Data:
[ 1.724000]
[ 1.724000] 0000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.725000] 0020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.727000] 0040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.728000] 0060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.729000] 0080: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.730000] 00a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.732000] 00c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.733000] 00e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.734000] 0100: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.735000] 0120: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.737000] 0140: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.738000] 0160: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.739000] 0180: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.740000] 01a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.742000] 01c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.743000] 01e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.744000] Spare Area
[ 1.744000] ffffffff ffffffff ffffffff ffffffbf
[ 1.745000] brcmnand_post_mortem_dump at offset e1e0800
[ 1.746000] Call Trace:
[ 1.746000] [<8049d3d4>] dump_stack+0x8/0x34
[ 1.746000] [<803654f4>] brcmnand_post_mortem_dump+0x54/0x120
[ 1.747000] [<80365db0>] brcmnand_ctrl_posted_read_cache+0x78c/0x91c
[ 1.748000] [<8036252c>] brcmnand_read_page+0x12c/0x25c
[ 1.749000] [<803647b8>] brcmnand_do_read_ops+0x150/0x268
[ 1.749000] [<803649bc>] brcmnand_read+0xec/0x89c
[ 1.750000] [<8035c100>] part_read+0x8c/0x138
[ 1.750000] [<80378740>] ubi_io_read+0xf0/0x1bc
[ 1.751000] [<80378f84>] ubi_io_read_vid_hdr+0x58/0x4bc
[ 1.752000] [<8037cbd4>] ubi_scan+0x388/0xb74
[ 1.752000] [<803731b4>] ubi_attach_mtd_dev+0x5d4/0xbd8
[ 1.753000] [<805b95b4>] ubi_init+0x2e4/0x3f0
[ 1.753000] [<80001570>] do_one_initcall+0x160/0x1f0
[ 1.754000] [<805a39f4>] kernel_init+0xd8/0x160
[ 1.754000] [<80006728>] kernel_thread_helper+0x10/0x18
[ 1.755000]
[ 1.755000] NAND registers snapshot
[ 1.756000]
[ 1.756000] 00002800: 00000302 01000000 00010000 0e1e0800
[ 1.757000] 00002810: 00000000 40000200 00000000 00000000
[ 1.757000] 00002820: ffffffff ffffffff ffffffff ffffffbf
[ 1.758000] 00002830: ffffffff ffffffff ffffffff ffffffff
[ 1.759000] 00002840: f7441010 00000000 17152300 00000000
[ 1.759000] 00002850: 5363444f 00000fc6 00000000 00000000
[ 1.760000] 00002860: 98d39026 76150208 00000000 f0000000
[ 1.761000] 00002870: 00000000 00000000 00000000 00000000
[ 1.762000] 00002880: 00000000 00000003 00000000 00000000
[ 1.762000] 00002890: 00010000 0e1e0800 00000000 00000000
[ 1.763000] 000028a0: 00000000 00000000 00000000 00000000
[ 1.764000] 000028b0: 00000000 00000000 00000000 00000000
[ 1.764000] 000028c0: 00000000
[ 1.765000] brcmnand_read_page: 3: brcmnand_posted_read_cache failed at offset=e1e0800, ret=-77
[ 1.766000] p8[15]=bf
[ 1.766000] brcmnand_handle_false_read_ecc_unc_errors: Uncorrectable error at offset e1e0800
[ 1.767000] Data:
[ 1.768000]
[ 1.768000] 0000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.769000] 0020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.770000] 0040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.772000] 0060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.773000] 0080: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.774000] 00a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.775000] 00c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.776000] 00e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.778000] 0100: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.779000] 0120: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.780000] 0140: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.781000] 0160: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.783000] 0180: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.784000] 01a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.785000] 01c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.786000] 01e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.788000] Spare Area
[ 1.788000] ffffffff ffffffff ffffffff ffffffbf
[ 1.789000] brcmnand_post_mortem_dump at offset e1e0800
[ 1.789000] Call Trace:
[ 1.790000] [<8049d3d4>] dump_stack+0x8/0x34
[ 1.790000] [<803654f4>] brcmnand_post_mortem_dump+0x54/0x120
[ 1.791000] [<80365db0>] brcmnand_ctrl_posted_read_cache+0x78c/0x91c
[ 1.792000] [<8036252c>] brcmnand_read_page+0x12c/0x25c
[ 1.792000] [<803647b8>] brcmnand_do_read_ops+0x150/0x268
[ 1.793000] [<803649bc>] brcmnand_read+0xec/0x89c
[ 1.793000] [<8035c100>] part_read+0x8c/0x138
[ 1.794000] [<80378740>] ubi_io_read+0xf0/0x1bc
[ 1.795000] [<80378f84>] ubi_io_read_vid_hdr+0x58/0x4bc
[ 1.795000] [<8037cbd4>] ubi_scan+0x388/0xb74
[ 1.796000] [<803731b4>] ubi_attach_mtd_dev+0x5d4/0xbd8
[ 1.796000] [<805b95b4>] ubi_init+0x2e4/0x3f0
[ 1.797000] [<80001570>] do_one_initcall+0x160/0x1f0
[ 1.798000] [<805a39f4>] kernel_init+0xd8/0x160
[ 1.798000] [<80006728>] kernel_thread_helper+0x10/0x18
[ 1.799000]
[ 1.799000] NAND registers snapshot
[ 1.799000]
[ 1.799000] 00002800: 00000302 01000000 00010000 0e1e0800
[ 1.800000] 00002810: 00000000 40000200 00000000 00000000
[ 1.801000] 00002820: ffffffff ffffffff ffffffff ffffffbf
[ 1.802000] 00002830: ffffffff ffffffff ffffffff ffffffff
[ 1.802000] 00002840: f7441010 00000000 17152300 00000000
[ 1.803000] 00002850: 5363444f 00000fc6 00000000 00000000
[ 1.804000] 00002860: 98d39026 76150208 00000000 f0000000
[ 1.805000] 00002870: 00000000 00000000 00000000 00000000
[ 1.805000] 00002880: 00000000 00000003 00000000 00000000
[ 1.806000] 00002890: 00010000 0e1e0800 00000000 00000000
[ 1.807000] 000028a0: 00000000 00000000 00000000 00000000
[ 1.807000] 000028b0: 00000000 00000000 00000000 00000000
[ 1.808000] 000028c0: 00000000
[ 1.809000] brcmnand_read_page: 3: brcmnand_posted_read_cache failed at offset=e1e0800, ret=-77
[ 1.810000] p8[15]=bf
[ 1.810000] brcmnand_handle_false_read_ecc_unc_errors: Uncorrectable error at offset e1e0800
[ 1.811000] Data:
[ 1.811000]
[ 1.811000] 0000: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.813000] 0020: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.814000] 0040: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.815000] 0060: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.816000] 0080: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.818000] 00a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.819000] 00c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.820000] 00e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.821000] 0100: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.823000] 0120: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.824000] 0140: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.825000] 0160: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.826000] 0180: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.828000] 01a0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.829000] 01c0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.830000] 01e0: ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff
[ 1.831000] Spare Area
[ 1.832000] ffffffff ffffffff ffffffff ffffffbf
[ 1.832000] brcmnand_post_mortem_dump at offset e1e0800
[ 1.833000] Call Trace:
[ 1.833000] [<8049d3d4>] dump_stack+0x8/0x34
[ 1.834000] [<803654f4>] brcmnand_post_mortem_dump+0x54/0x120
[ 1.835000] [<80365db0>] brcmnand_ctrl_posted_read_cache+0x78c/0x91c
[ 1.835000] [<8036252c>] brcmnand_read_page+0x12c/0x25c
[ 1.836000] [<803647b8>] brcmnand_do_read_ops+0x150/0x268
[ 1.837000] [<803649bc>] brcmnand_read+0xec/0x89c
[ 1.837000] [<8035c100>] part_read+0x8c/0x138
[ 1.838000] [<80378740>] ubi_io_read+0xf0/0x1bc
[ 1.838000] [<80378f84>] ubi_io_read_vid_hdr+0x58/0x4bc
[ 1.839000] [<8037cbd4>] ubi_scan+0x388/0xb74
[ 1.839000] [<803731b4>] ubi_attach_mtd_dev+0x5d4/0xbd8
[ 1.840000] [<805b95b4>] ubi_init+0x2e4/0x3f0
[ 1.841000] [<80001570>] do_one_initcall+0x160/0x1f0
[ 1.841000] [<805a39f4>] kernel_init+0xd8/0x160
[ 1.842000] [<80006728>] kernel_thread_helper+0x10/0x18
[ 1.842000]
[ 1.843000] NAND registers snapshot
[ 1.843000]
[ 1.843000] 00002800: 00000302 01000000 00010000 0e1e0800
[ 1.844000] 00002810: 00000000 40000200 00000000 00000000
[ 1.845000] 00002820: ffffffff ffffffff ffffffff ffffffbf
[ 1.845000] 00002830: ffffffff ffffffff ffffffff ffffffff
[ 1.846000] 00002840: f7441010 00000000 17152300 00000000
[ 1.847000] 00002850: 5363444f 00000fc6 00000000 00000000
[ 1.847000] 00002860: 98d39026 76150208 00000000 f0000000
[ 1.848000] 00002870: 00000000 00000000 00000000 00000000
[ 1.849000] 00002880: 00000000 00000003 00000000 00000000
[ 1.850000] 00002890: 00010000 0e1e0800 00000000 00000000
[ 1.850000] 000028a0: 00000000 00000000 00000000 00000000
[ 1.851000] 000028b0: 00000000 00000000 00000000 00000000
[ 1.852000] 000028c0: 00000000
[ 1.852000] brcmnand_read_page: 3: brcmnand_posted_read_cache failed at offset=e1e0800, ret=-77
[ 1.853000] UBI error: ubi_io_read: error -77 (ECC error) while reading 2048 bytes from PEB 1743:2048, read 0 bytes
[ 1.856000] UBI error: ubi_init: cannot attach mtd3
[ 1.857000] VFS: Cannot open root device "ubi0:rootfs" or unknown-block(8,1)
[ 1.858000] Please append a correct "root=" boot option; here are the available partitions:
[ 1.859000] 1f00 523264 mtdblock0 (driver?)
[ 1.860000] 1f01 1024 mtdblock1 (driver?)
[ 1.860000] 1f02 7168 mtdblock2 (driver?)
[ 1.861000] 1f03 515072 mtdblock3 (driver?)
[ 1.862000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)
[ 1.863000] Rebooting in 180 seconds..

Was läuft da nicht richtig?

Bin schon verzweifelt

Du musst angemeldet sein, um Bilder zu sehen.

 

[supraracer]

Mal ein aktuelles Newnigma2 oder OpenATV Image getestet?

-supraracer

 

[chiefobrei]

Hallo

Ich habe eine neue DM 7020 HDv2 mit dem aktuellem "dreambox-image-dm7020hdv2-20161019.nfi" geflasht. Nach dem reboot kann ich alles einstellen und dann funktioniert die Box auch , aber wenn ich neu Starte bleib sie gleich am Anfang beim booten hängen. Am Box Display steht dann dhcp... und die Image Version.

Box mit Dreamup flashen und "defekte Sektoren reparieren" aktivieren.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Wenn dies nicht hilft, dann Box zurücksenden.

 

[Browser1]

Das hab ich schon gemacht, leider kein Erfolg

 

[chiefobrei]

Dann Box zurück senden

 

[Browser1]

Ja genau
Gerade zurückgesandt!

 

[Navigon40Plus]

habe seit heute das selbe problem :-(
Nur ich habe nicht viel ahnung von neuflashen -.-*
Auf der box ein kollege newnigma2 oder sowas drauf geklatscht. Der ist leider nicht erreichbar :-(

 

[cojo]

Sie müssen registriert sein, um Links zu sehen.

https://www.digital-eliteboard.com/resources/newnigma2-10-02-2017.2639/

 

[SidVicious]

Hallo,

Ich habe auch genau das selbe Problem mit meiner dm7020HD. Kann ich das ohne neu flashen wieder zum laufen bekommen?
Eine art reperaturkonsole?
Mein Problem ist das mein alter PC schrott ging und ich seit dem keine neue Backups gemacht habe. somit fehlen mir einige sachen die zu OSCAM gehören.
Daher möchte ich ungern neu flashen.
Ich komme per FTP nicht mehr auf die Box. DCC sagt zwar telnet sei verbunden aber eingeben kann ich nichts.
Brwoser-Flashmenü komme ich rein und könnte wahrscheinlich neu flashen.

Ist ein NN2 image drauf.

Falls jemand weiss ob das auch ohne flashen möglich ist um zumindest die oscam dateien zu retten bitte melden.

Gruß

 

[cojo]

da wirst du schlechte Karten haben,mir fällt ausser neu flashen nichts ein

 

[SidVicious]

nichtmal eine möglichkeit die vorhandene oscam zu retten?

 

[MKLST2]

guck mal mit DCC ob FTP noch geht

bei NN² liegen die Oscam configs unter etc/tuxbox/config

 

[Navigon40Plus]

jetzt habe ich das nächste problem. Es zeigt mir im Display die ip an und darunter steht serial setup....was heißt das? Wie komme ich da wieder raus?
Es handelt sich um den 7020 HD V2

 

[cojo]

wie raus?
Ist doch zum flashen genau das wo du hin sollst

 

[Navigon40Plus]

das ist / war ein neues problem gewesen, ist nach neuflashen und einrichten aufgetreten. Netzschalter hat nix gebracht, musste es komplett vom Strom/Netz nehmen und 2 minuten warten. Danach ging es wieder.