Link ist nicht mehr aktiv.
DreamUp findet die Box nicht
Mehr Info. Welches Dreamup? Mit Bad Sektor Repair ? Seriell+Netzwerk ?
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++
dreamupd initialized
Scanning JFFS2 FS: . done.
/flash/bootlogo.elf
bootlogo size: 195531
2nd videomode is 254
2nd videomode 254 is invalid
no HDMI device detected
best supported mode is -1
using 1280x720p (60.00 Hz)
create surface 1280 720
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
lard.org>
parsing JPEG header..
JPEG Size: 1280x720
/flash/vmlinux.gz
<5>Linux version 2.6.18-7.3-dm500hd (tux@debian) (gcc version 4.4.3 (GCC) ) #1 S
MP Wed Jul 21 16:19:23 CEST 2010
Fetching vars from bootloader... none present, using defaults.
Detected 256 MB on MEMC0 (strap 0x22bc0010)
<4>WARNING: read invalid MAC address ff:ff:ff:ff:ff:ff from flash @ 0xbffff824
Default command line =
root=/dev/mtdblock3 rootfstype=jffs2 rw cons
1 831ffed8 8303cc48
g_board_RAM_size=256MB
Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 ebi_war=0 pci=1 smp=1
CPU revision is: 0002a044
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
---> memsize from bootloader: 148
User-defined physical RAM map:
node [00000000, 09400000: RAM]
node [09400000, 06c00000: RSVD]
<5>Reserving 108 MB upper memory starting at 09400000
<7>On node 0 totalpages: 65536
<7> DMA zone: 65536 pages, LIFO batch:15
Built 1 zonelists. Total pag
<5>Kernel command line: root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,11
5200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Synthesized TLB load handler fastpath (37 instructions).
Synthesized TLB store handler fastpath (37 instructions).
Synthesized TLB modify handler fastpath (36 instructions).
PID hash table entries: 2048 (order: 11, 8192 bytes)
Found MIPS counter frequen
Using 202.501 MHz high precision timer.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 144768k/262144k available (3331k kernel code, 117180k reserved, 617k dat
a, 156k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
plat_prepare_cpus: ENABLING 2nd Thread...
TP0: prom_boot_secondary: Kick off 2nd CPU...
CPU revision is: 0002a044
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.
Primary data cache 64kB, 4-way, linesize 64 bytes.
Synthesized TLB refill handler (23 instructions).
Brought up 2 CPUs
migration_cost=1000
NET: Registered protocol family 16
registering PCI controller with io_map_base unset
registering PCI controller with io_map_base unset
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
brcm-pm: disabling power to USB block
brcm-pm: disabling power to ENET block
brcm-pm: disabling power to SATA block
JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
ÿserial8250: ttyS0 at MMIO 0x0 (irq = 22) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 67) is a 16550A
brcm-pm: enabling power to ENET block
Broadcom BCM7413 P21 Ethernet Network Device v2.0 Jul 21 2010 16:17:40
Config Internal PHY Through MDIO: Auto-negotiation timed-out
: 10 MB Half-Duplex (assumed)
brcm-pm: enabling power to S
ata1: SATA max UDMA/133 cmd 0xB0510000 ctl 0xB0510020 bmdma 0xB0510030 irq 42
ata2: SATA max UDMA/133 cmd 0xB0510100 ctl 0xB0510120 bmdma 0xB0510130 irq 42
scsi0 : sata_svw
ata1: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051001c
scsi1 : sata_svw
ata2: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xb051011c
Broadcom STB NAND controller (BrcmNand Controller)
NAND_CS_NAND_XOR=00000000
brcmnand_probe: CS0: dev_id=ad76ad76
After: NandSelect=40000002, nand
NAND Config: Reg=04042300, chipSize=64 MB, blockSize=16K, erase_shift=e
busWidth=1, pageSize=512B, page_shift=9, page_mask=000001ff
timing1 not adjusted: 5363444f
timing2 not adjusted: 00000fc6
BrcmNAND mfg ad 76 Hynix HY27US08121A (dream) 64MB
Found NAND: ACC=00000010, cfg=04042300, flashId=ad76ad76, tim1=5363444f, tim2=00
000fc6
BrcmNAND version = 0x0302 64MB @00000000
B4: NandSelect=40000002, nandConfig=04042300, chipSelect=-1
brcmnand_probe: CS-1: dev_id=ad76ad76
After: NandSelect=40000002, nandConfig=040423
Found NAND chip on Chip Select -1, chipSize=64MB, usable size=64MB, base=0x
brcmnand_scan: B4 nand_select = 40000002
brcmnand_scan: After nand_select = 40000002
page_shift=9, bbt_erase_shift=14, chip_shift=26, phys_erase_shift=14
Brcm NAND controller version = 3.2 NAND flash size 64MB @1c000000
mtd->oobsize=16, mtd->eccOobSize=16
brcmnand_scan: mtd->oobsize=16
brcmnand_scan: oobavail=12, eccsize=512, writesize=512
brcmnand_scan, eccsize=512, writesize=512, eccsteps=1, ecclevel=15, eccbytes=3
brcmnand_default_bbt: bbt_td = bbt_main_descr
brcmnandCET: Status -> Deferred
numchips=1, size=4000000
Creating 4 MTD partitions on "bcm7xxx-nand.0":
0x0000000000000000-0x0000000004000000 : "complete"
0x0000000000000000-0x0000000000040000 : "loader"
0x0000000000040000-0x0000000000400000 : "boot partition"
0x0000000000400000-0x0000000004000000 : "root partition"
ehci_hcd_brcm_init: Initializing 2 EHCI controller(s)
brcm-pm: enabling power to USB block
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
- USB h/w setup mode <B>
- USB power enable set for active LOW mode
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Dri
hub 1-0:1.0: over-current change on port 1
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
brcm-ehci-1 brcm-ehci-1.1: BRCM EHCI
brcm-ehci-1 brcm-ehci-1.1: new USB bus registered, assigned bus number 2
brcm-ehci-1 brcm-ehci-1.1: irq 57, io mem 0x10480500
brcm-ehci-1 brcm-ehci-1.1: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 1-0:1.0: over-current change on port 2
ohci_hcd_brcm_init: Initializing 2 OHCI controller(s)
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: BRCM OHCI
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 3
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 2-0:1.0: over-current change on port 1
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480608
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 4
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10480600
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Stora
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50
2006 UTC).
ALSA device list:
No soundcards found.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Empty flash at 0x02da20f8 ends at 0x02da2200
Empty flash at 0x031820d8 ends at 0x03182200
VFS: Mounted root (jffs2 filesystem).
Freeing unused kernel memory: 156k freed
INIT: version 2.86 booting
Startting the hotplug events dispatcher
Synthesizing the initial hotplug events
Waiting for /dev to be fully populated
done
cdfs 2.6.27 loaded.
mount: mounting /dev/sda1 on /media/hdd failed: No such file or directory
/dev/sda: No such file or directory
/dev/sda: No such file or directory
/etc/rcS.d/S04bootup: line 13: can't create /proc/progress: nonexistent director
y
stb_core: module license 'Proprietary' taints kernel.
input: dreambox remote control (native) as /class/input/input0
input: dreambox advanced remote control (native) as /class/input/input1
input: dreambox ir keyboard as /class/input/input2
input: dreambox ir mouse as /class/input/input3
enter base init, xvd 20100413, vdc 20100413, rap 20100413, xpt 20100413
13:349019000 SMCA: controller reset timed out
register adapter
register adapter
register adapter
register adapter
register adapter
input: dreambox front panel as /class/input/input4
secfpga_status: ca14
HDMI: no device attached
set sb to 3(2)
set fb to 2(-1)
set input to 0
set fb to 2(-1)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
display 0 uses vbi path 1
display 1 uses vbi path 0
HDMI: hotplug handler!
HDMI: no device attached
using 50.00Hz as MonitorRefreshRate
SET FORMAT: display[0], format=37
set fb to 2(0)
bcm_video_analog_port_setup (fmt=7)
SET FORMAT: display[1], format=7
disable wss on display 0
disable wss on display 1
bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
udevd-event[340]: node_symlink: rename(/dev/fb.udev-tmp, /
irectory
enable mad
VIDEO0: set fallback framerate to 60000
VIDEO0: set progressive override mode to 1
VIDEO0: set streamtype!
set MPEG2
sw rave disabled!
set ac3 to downmix
set aac to downmix
DVB: registering new adapter (BCM7405).
autodetecting NIMs...
Initializing adapter 0 (BCM4505-DVB-S2)
bcm4506: found 4505, revision 0(b0)
bcm_initAP
BCM4506: upload & start firmware
450X uCode 0x33
no bcm3445 detected
DVB: registering frontend 0 (bcm4506)...
init ALSA!
set current avs auto aspect to 16:9
disable wss on display
disable wss on display 1
set sb to 3(1)
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0 got pts failed !!!! (ret 0)
VIDEO0: first pts 0x0
VIDEO0: framerate changed 3
VIDEO0: resolution changed (1280 720)
VIDEO0: aspect changed 3
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set current avs auto aspect to 16:9
disable wss on display 0
disable wss on display 1
set sb to 3(1)
VIDEO0: set blank
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
ldconfig: Can't open configuration file /etc/ld.so.conf: No such file or directo
ry
ldconfig: /lib/librt.so.1 is not a symbolic link
[ ok ]rting Avahi mDNS/DNS-SD Daemon: avahi-daemon
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
/etc/init.d/rcS: line 124: /var/run/mipsel: not found
/etc/init.d/rcS: line 125: /var/run/mips: not found
/etc/init.d/rcS: line 126: /var/run/ppc: not
/etc/init.d/rcS: line 127: /var/run/arm: not found
/etc/init.d/rcS: line 129: /var/run/mipsel: not found
/etc/init.d/rcS: line 128: /var/run/sh: not found
/etc/init.d/rcS: line 130: /var/run/mips: not found
/etc/init.d/rcS: line 131: /var/run/ppc: not found
/etc/init.d/rcS: line 132: /var/run/arm: not found
/etc/init.d/rcS: line 133: /var/run/sh: not found
/etc/init.d/rcS: /etc/init.d/rcS: line 136: line 134: /var/run/mipsel: not found
/var/run/ppc: not found
/etc/init.d/rcS: line 137: /var/run/arm: not found
/etc/init.d/rcS: line 135: /var/run/mips: not found
/etc/init.d/rcS: line 138: /var/run/sh: not found
/etc/init.d/rcS: line 139: /var/run/mipsel: not found
/etc/init.d/rcS: line 140: /var/run/mips: not found
/etc/init.d/rcS: line 141: /var/run/ppc: not found/etc/init.d/rcS: line 143: /et
c/init.d/rcS: /var/run/sh: not foundline 142:
/var/run/arm: not found
/etc/init.d/rcS: line 144: /var/run/mipsel: not found
/etc/init.d/rcS: line 145: /var/run/mips: not found
/etc/init.d/rcS: line 146: /var/run/ppc: not found
/etc/init.d/rcS: line 147: /var/run/arm: not found
/etc/init.d/rcS: line 148: /var/run/sh: not found
/etc/init.d/rcS: line 150: /var/run/mips: not found
/etc/init.d/rcS: line 149: /var/run/mipsel: not found
/etc/init.d/rcS: line 151: /var/run/ppc: not found
/etc/init.d/rcS: line 152: /var/run/arm: not found
/etc/init.d/rcS: line 153: /var/run/sh: not found
/etc/init.d/rcS: line 154: /var/run/mipsel: not found
/etc/init.d/rcS: line 155: /var/run/mips: not found
/etc/init.d/rcS: line 156: /var/run/ppc: not found
/etc/init.d/rcS: line 157: /var/run/arm: not found
/etc/init.d/rcS: line 158: /var/run/sh: not found
/etc/init.d/rcS: line 159: /var/run/mipsel: not found
/etc/init.d/rcS: line 160: /var/run/mips: not found
/etc/init.d/rcS: line 161: /var/run/ppc: not found
/etc/init.d/rcS: line 163: /etc/init.d/rcS: line 162: /var/run/sh: not found
/var/run/arm: not found
/etc/init.d/rcS: line 164: /var/run/mipsel: not found
/etc/init.d/rcS: line 165: /var/run/mips: not found
/etc/init.d/rcS: line 166: /var/run/ppc: not found
/etc/init.d/rcS: line 167: /var/run/arm: not found
/etc/init.d/rcS: line 168: /var/run/sh: not found
INIT: Entering runlevel: 3
Starting Dropbear SSH server: dropbear.
Starting internet superserver: inetd.
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... chown: unknown user ftp
Starting automounter: done.
[ ok ]rting Avahi mDNS/DNS-SD Daemon: avahi-daemon
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
VIDEO0: first pts 0
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
/usr/bin/gdaemon is already running
694
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
VIDEO0: first pts 0x0
/dev/dvb/adapter0/video0: Device or resource busy
/usr/bin/gdaemon is already running
694
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
/dev/dvb/adapter0/video0: Device or resource busy
/usr/bin/gdaemon is already running
694
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
VIDEO0: set blank to 0
sync is off so we enable it
playback!
total video delay: 0 (0 ms)
VIDEO0: start decode
flush video decoder
/usr/bin/gdaemon is already running
694
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
VIDEO0: first pts 0x0
/dev/dvb/adapter0/video0: Device or resource busy
/usr/bin/gdaemon is already running
694
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
K2
K3
K4
K5
Shmoo
/dev/dvb/adapter0/video0: Device or resource busy
%00000001%
RC1=000000
/usr/bin/gdaemon is already running
RC2=00000016
WC2=00
69433
VIDEO0: set blank to 0C
WC3=FFFF
VIDEO0: stop decode=0000000C
e data encoding not little-endian
/dev/dvb/adapter0/video0: Device or resource busy
/usr/bin/gdaemon is already running
694
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
/dev/dvb/adapter0/video0: Device or resource busy
/usr/bin/gdaemon is already running
694
VIDEO0: set blank to 0
VIDEO0: stop decode
VIDEO0: set blank to 0
no decoder left in sync handling so disable xpt_sync
/usr/bin/enigma2: error while loading shared libraries: /lib/librt.so.1: ELF fil
e data encoding not little-endian
INIT: Id "e2" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
JFFS2 notice: (24) check_node_data: wrong data CRC in data node at 0x007e6000: r
ead 0x31010004, calculated 0x48b1ee4f.
JFFS2 notice: (24) check_node_data: wrong data CRC in data node at 0x03181c00: r
ead 0xa16ba343, calculated 0xcbb4a889.
JFFS2 notice: (24) check_node_data: wrong data CRC in data node at 0x03241800: r
ead 0x23bf33, calculated 0x2ca30b11.
Wir verwenden Cookies und ähnliche Technologien für folgende Zwecke:
Akzeptieren Sie Cookies und diese Technologien?
Wir verwenden Cookies und ähnliche Technologien für folgende Zwecke:
Akzeptieren Sie Cookies und diese Technologien?