Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

CS-Sender ruckeln

    Nobody is reading this thread right now.
AW: CS-Sender ruckeln

4gx35 schrieb:
mit der version 5882 wird er keinen erfolg haben,
Link ist nicht mehr aktiv., momentan bei #94xx
Zum Vergrößern anklicken....

Ok habs mir gezogen.
werde dann heute Abend die enthaltene Version oe1.6#9159 installieren.

Soll ich dann die OSCAM.SERVER lt. Anleitung ändern oder die von "Spencer2k6"?
Wichtige Änderungen für aktuelle Oscams OE 1.6 / 2.0 ab Version 9099
im internen Reader der Dreambox und ebenfalls für Smartreader
nur bei Karten im internen Reader der Dreambox und beim Smargo ist standardmäßig
mhz=1 und cardmhz= 2700 einzutragen sowie autospeed zu aktivieren
alternativ für s02, d02, i12 geht evtl. folgendes mit besseren ecm zeiten interne reader:
mhz=700, cardmhz=2100 und autospeed aber deaktivieren !
 
AW: CS-Sender ruckeln

entweder beide mhz 357 wie oben, autospeed deaktiv, aber group = 1 beim reader und usern ?
oder autospeed aktiv und mhz aus anleitung/aus webif verwenden, services erst mal nicht verwenden,
werden auch nicht benötigt, falls du nur die v13 hast
 
AW: CS-Sender ruckeln

Ich habe jetzt aus dem oben genanntem Packet alles so installiert lt. Anleitung.

1. Cam beendet
2. oscam_1.20 umbenann in oscam und koppiert (755)
3. oscam.emu kopiert (755)
4. EMU start
5. Box neu gestartet

Die Oscam Dateien habe ich jetzt mal so belassen.

ALLES DUNKEL...

log:


-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jan 28 19:17:38 2014
-------------------------------------------------------------------------------
2014/01/28 19:17:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9159 (mipsel-unknown-linux-gnu)
2014/01/28 19:17:38 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7422
2014/01/28 19:17:38 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/01/28 19:17:38 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2014/01/28 19:17:38 0 s signal handling initialized
2014/01/28 19:17:38 0 s 168 service-id's loaded in 8ms
2014/01/28 19:17:38 0 s cccam: initialized (fd=6, port=12000, prio=1)
2014/01/28 19:17:38 0 s V13 [internal] creating thread for device /dev/sci0
2014/01/28 19:17:38 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/28 19:17:38 0 s waiting for local card init
2014/01/28 19:17:38 52A5C8 h webif: decompressed 56120 bytes back into 161960 bytes
2014/01/28 19:17:38 52A5C8 h HTTP Server running. ip=0.0.0.0 port=2002
2014/01/28 19:17:38 5288F0 r V13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/01/28 19:17:39 5288F0 r V13 [internal] card detected
2014/01/28 19:17:41 5288F0 r V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/28 19:17:41 5288F0 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/28 19:17:41 5288F0 r V13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/01/28 19:17:41 5288F0 r V13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/28 19:17:43 5288F0 r V13 [internal] card system not supported
2014/01/28 19:17:43 5288F0 r V13 [internal] Normal mode failed, reverting to Deprecated Mode
2014/01/28 19:17:44 5288F0 r V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/28 19:17:44 5288F0 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/28 19:17:44 5288F0 r V13 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/01/28 19:17:44 5288F0 r V13 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/01/28 19:17:47 5288F0 r V13 [internal] card system not supported
2014/01/28 19:17:47 5288F0 r V13 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/28 19:17:47 5288F0 r V13 [internal] card initializing error
2014/01/28 19:17:47 0 s init for all local cards done
2014/01/28 19:17:47 0 s anti cascading disabled
2014/01/28 19:17:47 543BF8 c plain dvbapi-client granted (ADMIN, au=auto (1 reader))
2014/01/28 19:17:47 543BF8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/01/28 19:17:47 545F18 c anonymous disconnected from 1xxxxx
2014/01/28 19:17:47 0 --- Skipped 1 duplicated log lines ---
2014/01/28 19:17:47 549958 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 54B6C0 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 54D428 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 54F190 c anonymous disconnected from xxxxxxx
2014/01/28 19:17:47 550EF8 c anonymous disconnected from 1xxxxx
2014/01/28 19:17:47 552C60 c anonymous disconnected from xxxxxx
2014/01/28 19:17:47 559C08 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 55B970 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 55D6D8 c anonymous disconnected from 1xxxx
2014/01/28 19:17:47 55F460 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 5611E8 c anonymous disconnected from xxxx
2014/01/28 19:17:47 562F70 c anonymous disconnected from 1xxxx
2014/01/28 19:17:47 564CF8 c anonymous disconnected from xxxxx
2014/01/28 19:17:47 56D7A0 c anonymous disconnected from xxxx
2014/01/28 19:17:47 56F508 c encrypted cccam-client xxxxx granted (LOLO, au=off)
2014/01/28 19:17:48 585E80 c encrypted cccam-client xxxx granted (KUEHNY, au=off)
2014/01/28 19:17:48 589690 c encrypted cccam-client xxxgranted (MIKE, au=off)
2014/01/28 19:17:49 58CF48 c encrypted cccam-clientxxxxx granted (RUEDE, au=off)
2014/01/28 19:17:50 585E80 c KUEHNY (09C4&000000/0B5D/0071/B3:F759575B147728419D58F8D4316329B8): rejected group (1 ms) - History HD (no matching reader)
2014/01/28 19:17:50 585E80 c KUEHNY (09C4&001B07/0B5D/0071/B3:00000000000000000000000000000000): invalid (0 ms) - History HD (invalid SID)
2014/01/28 19:17:52 543BF8 c [DVBAPI] Receiver sends PMT command 3 for channel 002B
2014/01/28 19:17:52 543BF8 c [DVBAPI] Receiver wants to demux srvid 002B on adapter 0000 camask 0008 index 0003
2014/01/28 19:17:52 543BF8 c [ADD PID 0] CAID: 1702 ECM_PID: 1746 PROVID: 000000
2014/01/28 19:17:52 543BF8 c [ADD PID 1] CAID: 1833 ECM_PID: 1846 PROVID: 000000
2014/01/28 19:17:52 543BF8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B46 PROVID: 000000
2014/01/28 19:17:52 543BF8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F46 PROVID: 000000
2014/01/28 19:17:52 543BF8 c [ADD PID 4] CAID: 098C ECM_PID: 1A46 PROVID: 000000
2014/01/28 19:17:52 543BF8 c Found 5 ECMpids and 5 STREAMpids in PMT
2014/01/28 19:17:52 543BF8 c [DVBAPI] Receiver wants to demux srvid 002B on adapter 0000 camask 0008 index 0003
2014/01/28 19:17:52 543BF8 c New program number: 002B (Sky Cinema +24) [pmt_list_management 3]
2014/01/28 19:17:52 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:52 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:52 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:53 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:53 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:53 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:53 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:54 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:54 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:54 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:55 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:55 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:55 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:56 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:56 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:56 589690 c MIKE (09C4&000000/025B/0083/B3:890F55B8D03CA229C1CE795578099CF7): rejected group (0 ms) - Sky Cinema HD (no matching reader)
2014/01/28 19:17:56 589690 c MIKE (09C4&001BB6/025B/0083/B3:00000000000000000000000000000000): invalid (0 ms) - Sky Cinema HD (invalid SID)
2014/01/28 19:17:56 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:57 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:57 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:57 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:58 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:58 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:58 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:58 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:59 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:17:59 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:17:59 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:18:00 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:18:00 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:18:00 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/01/28 19:18:01 543BF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/01/28 19:18:01 543BF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
 
Zuletzt bearbeitet von einem Moderator:
AW: CS-Sender ruckeln

poste bitte deine oscam.server datei nochmal, ich denke mit MHZ bzw. cardMhz stimmt was nicht. Es gab Änderung in Einstellungen.
 
AW: CS-Sender ruckeln

Tue Dir und Deinen Clients einen Gefallen:

poste keine öffentlichen IPs :emoticon-0127-lipss
 
AW: CS-Sender ruckeln

@Joopastron - hatte die ab dem ersten Block mit ... versehen.
Aber Du hattest die bestimmt auch gerade in Arbeit :dance3:

Lieber einmal mehr, als einmal zu wenig :good:
 
AW: CS-Sender ruckeln

Ups... auf die Ip´s habe ich in meiner Verzweiflung nicht mehr gedacht... Danke für den Hinweis!!

Habe selbst etwas probiert.
Mit
OSCAM 1.20-unstable_svn build r8939 hab ich es wieder hell bekommen.

Jetzt sieht auch die log datei besser aus (soweit ich das selbst interpretieren kann) zumindest steht jetzt was von "FastMode"

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Jan 28 21:31:18 2014
-------------------------------------------------------------------------------
2014/01/28 21:31:18 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8939 (mipsel-unknown-linux-gnu)
2014/01/28 21:31:18 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 4143
2014/01/28 21:31:18 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/01/28 21:31:18 0 s userdb reloaded: 7 accounts loaded, 0 expired, 0 disabled
2014/01/28 21:31:18 0 s signal handling initialized
2014/01/28 21:31:18 0 s 168 service-id's loaded in 10ms
2014/01/28 21:31:18 0 s cccam: initialized (fd=6, port=******, prio=1)
2014/01/28 21:31:18 0 s V13 [internal] creating thread for device /dev/sci0
2014/01/28 21:31:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/28 21:31:18 0 s waiting for local card init
2014/01/28 21:31:18 521258 h webif: decompressed 54473 bytes back into 155840 bytes
2014/01/28 21:31:18 521258 h HTTP Server running. ip=0.0.0.0 port=****
2014/01/28 21:31:18 51F588 r V13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/01/28 21:31:20 51F588 r V13 [internal] card detected
2014/01/28 21:31:21 51F588 r V13 [internal] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2014/01/28 21:31:21 51F588 r V13 [internal] Init card protocol T0, FI=1, F=372, D=16, N=3
2014/01/28 21:31:21 51F588 r V13 [internal] Calculated work ETU is 4.65 us
2014/01/28 21:31:21 51F588 r V13 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2014/01/28 21:31:22 51F588 r V13 [internal] Card type: P1TV
2014/01/28 21:31:22 51F588 r V13 [internal] Rom version: 10A7
2014/01/28 21:31:22 51F588 r V13 [internal] parental lock setting: FF FF FF FF
2014/01/28 21:31:22 51F588 r V13 [internal] type: VideoGuard Sky Germany (09C4) FastMode, caid: 09C4
2014/01/28 21:31:22 51F588 r V13 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/01/28 21:31:22 51F588 r V13 [internal] ready for requests
2014/01/28 21:31:22 51F588 r V13 [internal] found card system videoguard2
2014/01/28 21:31:22 51F588 r V13 [videoguard2] card detected
2014/01/28 21:31:22 51F588 r V13 [videoguard2] type: VideoGuard Sky Germany (09C4) FastMode
2014/01/28 21:31:22 51F588 r V13 [videoguard2] tier: 2712, expiry date: 2012/12/17-00:01:00
2014/01/28 21:31:22 51F588 r V13 [videoguard2] tier: 2710, expiry date: 2012/10/11-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 0048, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 0056, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 0057, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 007b, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 008e, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00bc, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00bd, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00be, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00c0, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00c7, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00c8, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00c9, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00ca, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00f3, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00fa, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:23 51F588 r V13 [videoguard2] tier: 00ff, expiry date: 2014/04/21-01:01:00
2014/01/28 21:31:26 0 s init for all local cards done
2014/01/28 21:31:26 0 s anti cascading disabled
2014/01/28 21:31:26 540350 c plain dvbapi-client granted (ADMIN, au=auto (1 reader))
2014/01/28 21:31:26 540350 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/01/28 21:31:26 542A20 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 0 --- Skipped 1 duplicated log lines ---
2014/01/28 21:31:26 5464A8 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 548208 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 549F68 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 54BCC8 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 54DA28 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 54F788 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 551508 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 55A038 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 55BD98 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 55DAF8 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 55F878 c anonymous disconnected from xxxxxxxx
2014/01/28 21:31:26 5615F8 c encrypted cccam-client xxxxxxxx granted (RUEDE, au=off)
2014/01/28 21:31:27 574418 c encrypted cccam-client xxxxxxxx granted (LOLO, au=off)
2014/01/28 21:31:27 540350 c [DVBAPI] Receiver sends PMT command 3 for channel 14B5
2014/01/28 21:31:27 540350 c [ADD PID 0] CAID: 09C4 ECM_PID: 1BB2 PROVID: 000000
2014/01/28 21:31:27 540350 c [ADD PID 1] CAID: 098C ECM_PID: 1AB2 PROVID: 000000
2014/01/28 21:31:27 540350 c [ADD PID 2] CAID: 0648 ECM_PID: 1FB2 PROVID: 000000
2014/01/28 21:31:27 540350 c [ADD PID 3] CAID: 0650 ECM_PID: 1FB3 PROVID: 000000
2014/01/28 21:31:27 540350 c Found 4 ECMpids and 4 STREAMpids in PMT
2014/01/28 21:31:27 540350 c [DVBAPI] Receiver wants to demux srvid 14B5 on adapter 0000 camask 0008 index 0003
2014/01/28 21:31:27 540350 c New program number: 14B5 (ProSieben HD Austria) [pmt_list_management 3]
2014/01/28 21:31:27 540350 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 09C4 PROVID 000000 ECMPID 1BB2 ANY CHID VPID 01FF
2014/01/28 21:31:27 577DC0 c encrypted cccam-client xxxxxxxx granted (MIKE, au=off)
2014/01/28 21:31:27 57BEA0 c encrypted cccam-client xxxxxxxx granted (KUEHNY, au=off)
2014/01/28 21:31:29 540350 c ADMIN (09C4&000000/0F3E/14B5/B3:3269DDAF9AC4584AC2963173C30EB38D): found (1079 ms) by V13 - ProSieben HD Austria
2014/01/28 21:31:30 574418 c LOLO (09C4&000000/012E/000B/B3:7E26F667DBA1EB4DAADCD6B970D199F2): found (127 ms) by V13 - Sky Cinema +1
2014/01/28 21:31:31 540350 c ADMIN (09C4&000000/0F3E/14B5/B3:119910D1FD89C9E89C30BF51EBCAAFA0): found (123 ms) by V13 - ProSieben HD Austria
2014/01/28 21:31:34 577DC0 c MIKE (09C4&000000/0B58/0074/B3:CB9BB631F72CA1CA6E8DDE6166D7D12E): found (129 ms) by V13 - Disney Channel HD
2014/01/28 21:31:34 57BEA0 c KUEHNY (09C4&000000/0B5D/0071/B3:576A9B8CFF564F6C3018358C6422EFD1): found (247 ms) by V13 - History HD
2014/01/28 21:31:34 51F588 r V13 [videoguard2] ADMIN emmtype=global, len=47, idx=0, cnt=1: written (35 ms)
2014/01/28 21:31:37 574418 c LOLO (09C4&000000/012E/000B/B3:75A588A37ACCCDF7D1CD42D5E1394671): found (125 ms) by V13 - Sky Cinema +1
2014/01/28 21:31:39 540350 c ADMIN (09C4&000000/0F3E/14B5/B3:CCC3ABB01E4FA737AA6BEA9A06C98051): found (127 ms) by V13 - ProSieben HD Austria
2014/01/28 21:31:41 577DC0 c MIKE (09C4&000000/0B58/0074/B3:1381394F5438CB34B37A1E589ACFABDD): found (131 ms) by V13 - Disney Channel HD
2014/01/28 21:31:41 57BEA0 c KUEHNY (09C4&000000/0B5D/0071/B3:102CEF81E92925BF83C6A8A8EB9A7A28): found (241 ms) by V13 - History HD
2014/01/28 21:31:44 574418 c LOLO (09C4&000000/012E/000B/B3:9B31CEE20C5CC754D2FB78744808DED1): found (131 ms) by V13 - Sky Cinema +1
2014/01/28 21:31:45 540350 c ADMIN (09C4&000000/0F3E/14B5/B3:BA273AD4C687BC130D1193B7082E812B): found (125 ms) by V13 - ProSieben HD Austria
2014/01/28 21:31:46 51F588 r V13 [videoguard2] ADMIN emmtype=global, len=32, idx=1, cnt=1: written (19 ms)
2014/01/28 21:31:48 577DC0 c MIKE (09C4&000000/0B58/0074/B3:081E92BD46B7DA5C40EAC450A77D83FD): found (127 ms) by V13 - Disney Channel HD
2014/01/28 21:31:48 57BEA0 c KUEHNY (09C4&000000/0B5D/0071/B3:53CEC5365662242E23AC32C28E5F6B16): found (238 ms) by V13 - History HD
2014/01/28 21:31:51 574418 c LOLO (09C4&000000/012E/000B/B3:449ADB92652879DD39CAD1432519EBFA): found (127 ms) by V13 - Sky Cinema +1
2014/01/28 21:31:52 540350 c ADMIN (09C4&000000/0F3E/14B5/B3:4F1D25603E177F59F4A70098585C3D93): found (127 ms) by V13 - ProSieben HD Austria
2014/01/28 21:31:55 577DC0 c MIKE (09C4&000000/0B58/0074/B3:AD10668067A092C4B4BDD5F9CE3B9A7D): found (127 ms) by V13 - Disney Channel HD
2014/01/28 21:31:55 57BEA0 c KUEHNY (09C4&000000/0B5D/0071/B3:8416DBB994253685DC2CB77FE02B0628): found (250 ms) by V13 - History HD

Hier noch die OSCAM.SERVER falls noch etwas geändert werden muss

[reader]
label = V13
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
services=SkyGermany
boxid = 12345678
detect = CD
mhz = 357
cardmhz = 357
group = 3
emmcache = 1,1,2
ins7e11=15
ndsversion=2

Da habe ich mir etwas aufgehalst.....
 
AW: CS-Sender ruckeln

Der Server sieht so gut aus :good:
 
AW: CS-Sender ruckeln

dann war die mhz einstellung für #9159 einfach nur falsch, immer webif verwenden
warum reader (und wohl alle user) group=3 hat ist zwar egal, aber irgendwie wenig logisch
 
AW: CS-Sender ruckeln

Möchte mich noch mal bei allen bedanken für die schnelle Hilfe.

Das Board ist Top!!! Kann man auf jeden Fall weiter empfehlen

Na dann, bis bald. :thank_you:

Gruss
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

F
  • Gesperrt
Newbie sucht Ursache für Freezer (Unitymedia)
Antworten
7
Aufrufe
1K
joopastron
P
Oscam - Einige Channels bleiben dunkel mit VDR
Antworten
10
Aufrufe
2K
manowar45
M
T
Pingulux plus CS - HD Sender ruckeln stark
2 3 4
Antworten
54
Aufrufe
10K
Andyowl
A
S
CS Atemio 510HD funktionier plötzlich nicht mehr
2
Antworten
22
Aufrufe
3K
SubZer0
S
J
Tele Columbus - KabelKoisk Primacom Sender erhellen
Antworten
12
Aufrufe
3K
ln1hf
L
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…