Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Conax Smardcard für Hallo TV

Status
Für weitere Antworten geschlossen.
Leider läuft es noch immer nicht :

Die log sieht so aus!


2013/12/25 12:52:49 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 622
2013/12/25 12:52:49 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/12/25 12:52:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/25 12:52:49 0 s signal handling initialized
2013/12/25 12:52:49 0 s HD [internal] creating thread for device /dev/sci0
2013/12/25 12:52:49 0 s HALLO [internal] creating thread for device /dev/sci1
2013/12/25 12:52:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/25 12:52:49 0 s waiting for local card init
2013/12/25 12:52:49 B40AB8 r HALLO [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2013/12/25 12:52:49 B3ECB0 r HD [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2013/12/25 12:52:49 B4DD98 h webif: decompressed 54551 bytes back into 156136 bytes
2013/12/25 12:52:49 B4DD98 h HTTP Server running. ip=0.0.0.0 port=16002
2013/12/25 12:52:50 B3ECB0 r HD [internal] card detected
2013/12/25 12:52:50 B40AB8 r HALLO [internal] card detected
2013/12/25 12:52:52 B40AB8 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 12:52:52 B40AB8 r HALLO [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
2013/12/25 12:52:52 B40AB8 r HALLO [internal] Calculated work ETU is 17.39 us reader mhz = 368
2013/12/25 12:52:52 B40AB8 r HALLO [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:52:52 B3ECB0 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 12:52:52 B3ECB0 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 12:52:52 B3ECB0 r HD [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/25 12:52:52 B3ECB0 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:52:54 B3ECB0 r HD [internal] Warning: Card returned error on setting ifsd value to 160
2013/12/25 12:52:54 B40AB8 r HALLO [internal] card system not supported
2013/12/25 12:52:54 B40AB8 r HALLO [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/25 12:52:55 B3ECB0 r HD [internal] detect native nagra card
2013/12/25 12:52:55 B40AB8 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 12:52:55 B40AB8 r HALLO [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
2013/12/25 12:52:55 B40AB8 r HALLO [internal] Calculated work ETU is 101.09 us reader mhz = 368
2013/12/25 12:52:55 B40AB8 r HALLO [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:52:56 B3ECB0 r HD [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/25 12:52:58 B3ECB0 r HD [internal] T1 Resync command error, trying to reactivate!
2013/12/25 12:52:58 B40AB8 r HALLO [internal] card system not supported
2013/12/25 12:52:58 B40AB8 r HALLO [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/25 12:52:58 B40AB8 r HALLO [internal] card initializing error
2013/12/25 12:52:59 B3ECB0 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 12:52:59 B3ECB0 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 12:52:59 B3ECB0 r HD [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/25 12:52:59 B3ECB0 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:53:01 B3ECB0 r HD [internal] Warning: Card returned error on setting ifsd value to 160
2013/12/25 12:53:03 B3ECB0 r HD [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/25 12:53:05 B3ECB0 r HD [internal] T1 Resync command error, trying to reactivate!
2013/12/25 12:53:06 B3ECB0 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 12:53:06 B3ECB0 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 12:53:06 B3ECB0 r HD [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/25 12:53:06 B3ECB0 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:53:08 B3ECB0 r HD [internal] Warning: Card returned error on setting ifsd value to 160
2013/12/25 12:53:08 B3ECB0 r HD [internal] card system not supported
2013/12/25 12:53:08 B3ECB0 r HD [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/25 12:53:10 B3ECB0 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 12:53:10 B3ECB0 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 12:53:10 B3ECB0 r HD [internal] Calculated work ETU is 101.09 us reader mhz = 368
2013/12/25 12:53:10 B3ECB0 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:53:11 B3ECB0 r HD [internal] Warning: Card returned error on setting ifsd value to 160
2013/12/25 12:53:12 B3ECB0 r HD [internal] detect native nagra card
2013/12/25 12:53:14 B3ECB0 r HD [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/25 12:53:16 B3ECB0 r HD [internal] T1 Resync command error, trying to reactivate!
2013/12/25 12:53:17 B3ECB0 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 12:53:17 B3ECB0 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 12:53:17 B3ECB0 r HD [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/25 12:53:17 B3ECB0 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:53:19 B3ECB0 r HD [internal] Warning: Card returned error on setting ifsd value to 160
2013/12/25 12:53:21 B3ECB0 r HD [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/12/25 12:53:22 B3ECB0 r HD [internal] T1 Resync command error, trying to reactivate!
2013/12/25 12:53:24 B3ECB0 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 12:53:24 B3ECB0 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 12:53:24 B3ECB0 r HD [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/25 12:53:24 B3ECB0 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2013/12/25 12:53:26 B3ECB0 r HD [internal] Warning: Card returned error on setting ifsd value to 160
2013/12/25 12:53:26 B3ECB0 r HD [internal] card system not supported
2013/12/25 12:53:26 B3ECB0 r HD [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2013/12/25 12:53:26 B3ECB0 r HD [internal] card initializing error
2013/12/25 12:53:26 0 s init for all local cards done
2013/12/25 12:53:26 0 s anti cascading disabled

oscam conf:

[global]
lb_mode = 0
disablelog = 1
loghistorysize = 9999
logfile = /var/log/ipc/OScam.log
usrfileflag = 1
fallbacktimeout = 2000
unlockparental = 1
nice = -1
maxlogsize = 1024
preferlocalcards = 1

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httphelplang = de
httprefresh = 60
httphideidleclients = 1
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.178.10-192.168.178.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpdyndns =
oascam dvapi da steht nixs drin!!!

oscam server:
[reader]
label = HD
description = HD+
protocol = internal
device = /dev/sci0
caid = 1830
ident = 1830:000000,003411,008011
boxkey = musste ich entfernen !!!
rsakey = musste ich entfernen !!!!
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1

[reader]
label = HALLO
description = Hallo TV
protocol = internal
device = /dev/sci1
caid = 0B02
ident = 0B02:000000
boxid = 12345678
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
oscam server bak : steht nixs drin!!!


oscam services : steht nixs drin!!!!

oscamcam: srvid : steht nixs drin!!!

oscam user :

[account]
user = oscam
pwd = oscam
description = STB
au = HD,HALLO
group = 1,2

oscam whitelist:

steht nixs drin !!!!!

- - - - - - - - - -

oscam ist jetzt die :
OSCAM 1.20-unstable_svn build r9044



- - - - - - - - - -

[TABLE="class: status"]
[TR="class: s"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"]0xb3adf0[/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]25.12.13 12:52:49[/TD]
[TD="class: statuscol11"]00:10:04[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:10:04[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"]0xb4dd98[/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]25.12.13 12:52:49[/TD]
[TD="class: statuscol11"]00:10:04[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:09:57[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/2[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"] [/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]HD[/TD]
[TD="class: statuscol5"] [/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"] [/TD]
[TD="class: statuscol15"]00:10:04[/TD]
[TD="class: statuscol16"]ERROR [/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"] [/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]2[/TD]
[TD="class: statuscol4"]HALLO[/TD]
[TD="class: statuscol5"] [/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"] [/TD]
[TD="class: statuscol15"]00:10:04[/TD]
[TD="class: statuscol16"]ERROR [/TD]
[/TR]
[/TABLE]
 
Zuletzt bearbeitet von einem Moderator:
AW: Conax Smardcard für Hallo TV

so es hat sich ein bischen was geändert habe wie im vorherigen beitrag der gesendet wurde die ident entfernt!!!

jetzt sieht es so aus !!!

2013/12/25 17:53:11 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2628
2013/12/25 17:53:11 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/12/25 17:53:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/25 17:53:11 0 s signal handling initialized
2013/12/25 17:53:11 0 s HD [internal] creating thread for device /dev/sci0
2013/12/25 17:53:11 0 s HALLO [internal] creating thread for device /dev/sci1
2013/12/25 17:53:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/25 17:53:11 0 s waiting for local card init
2013/12/25 17:53:11 7515B8 r HD [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2013/12/25 17:53:11 7532B8 r HALLO [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2013/12/25 17:53:11 743C20 h webif: decompressed 54551 bytes back into 156136 bytes
2013/12/25 17:53:11 743C20 h HTTP Server running. ip=0.0.0.0 port=16002
2013/12/25 17:53:12 7515B8 r HD [internal] card detected
2013/12/25 17:53:12 7532B8 r HALLO [internal] card detected
2013/12/25 17:53:13 7532B8 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 17:53:13 7515B8 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 17:53:13 7515B8 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 17:53:13 7515B8 r HD [internal] Calculated work ETU is 8.70 us reader mhz = 368
2013/12/25 17:53:14 7515B8 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
- - - - - - - - - -

[TABLE="class: status"]
[TR]
[TH="class: statuscol0"]hide[/TH]
[TH="class: statuscol1"]Thread ID[/TH]
[TH="class: statuscol2"]Type[/TH]
[TH="class: statuscol3"]ID[/TH]
[TH="class: statuscol4"]Label[/TH]
[TH="class: statuscol5"]AU[/TH]
[TH="class: statuscol6"]Crypted[/TH]
[TH="class: statuscol7"]Address[/TH]
[TH="class: statuscol8"]Port[/TH]
[TH="class: statuscol9"]Protocol[/TH]
[TH="class: statuscol10"]Login[/TH]
[TH="class: statuscol11"]Online[/TH]
[TH="class: statuscol12"]CAID:SRVID[/TH]
[TH="class: statuscol13"]Current Channel[/TH]
[TH="class: statuscol14"]LB Value/ Reader[/TH]
[TH="class: statuscol15"]Idle[/TH]
[TH="class: statuscol16"]Status[/TH]
[/TR]
[TR="class: s"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"]0x73fdf0[/TD]
[TD="class: statuscol2"]s[/TD]
[TD="class: statuscol3"]0[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol10"]25.12.13 17:53:11[/TD]
[TD="class: statuscol11"]00:11:04[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:11:04[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"]0x743c20[/TD]
[TD="class: statuscol2"]h[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5"][/TD]
[TD="class: statuscol6"][/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol10"]25.12.13 17:53:11[/TD]
[TD="class: statuscol11"]00:11:04[/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:10:59[/TD]
[TD="class: statuscol16"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/2[/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"] [/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]1[/TD]
[TD="class: statuscol4"]HD[/TD]
[TD="class: statuscol5"] [/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"] [/TD]
[TD="class: statuscol15"]00:11:04[/TD]
[TD="class: statuscol16"]NEEDINIT [/TD]
[/TR]
[TR="class: r"]
[TD="class: statuscol0"] [/TD]
[TD="class: statuscol1"] [/TD]
[TD="class: statuscol2"]r[/TD]
[TD="class: statuscol3"]2[/TD]
[TD="class: statuscol4"]HALLO[/TD]
[TD="class: statuscol5"] [/TD]
[TD="class: statuscol6"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]internal[/TD]
[TD="class: statuscol10"][/TD]
[TD="class: statuscol11"][/TD]
[TD="class: statuscol12"]0000:0000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"] [/TD]
[TD="class: statuscol15"]00:11:04[/TD]
[TD="class: statuscol16"]NEEDINIT [/TD]
[/TR]
[/TABLE]
 
Zuletzt bearbeitet von einem Moderator:
Edit:

Dann lass mal jetzt auf einem Programm wo HD+ läuft und schau mal was passiert und ob EMMs geschrieben werden. Wenn du bei Reader im Webif bei den einzelnen Karten auf Entitlements gehst (der Button int dem i rechts), was steht da für ein Expire Date?
 
AW: Conax Smardcard für Hallo TV

ich hab mal nen bischen gegoogelt und hab gelesen das bei den internen Readern und OE 2.0 einige Änderungen zu machen sind.
Hier mal nen Beispiel ...bei dem User solls so laufen mit den Änderungen.

[reader]
label = HD
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 1830
boxkey = xxx
rsakey =xxx
detect = cd
mhz = 540
cardmhz = 2700

group = 1
emmcache = 1,1,2

das hab ich schon ein paar mal gelesen mit diesen, in rot gefärbten, Änderungen in der Serverdatei. Eventuell auch bei der Hallo Karte ausprobieren.
Versuch ists allemal wert.

Gruß vom Flieger
 
AW: Conax Smardcard für Hallo TV

Entitlements for HD
[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"][/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]n/a[/TD]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]xxxx[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[/TABLE]





Entitlements for HALLO
[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"][/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]n/a[/TD]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]xxxx0[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3B 34 94 00 30 42 30 30[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[/TABLE]
- - - - - - - - - -

änderungen habe ich vorgenommen keine änderung!
 
Zuletzt bearbeitet von einem Moderator:
Re: AW: Conax Smardcard für Hallo TV

gna, die Karten werden nicht vollständig erkannt. Probiern mal den Tip von 0815flieger. Ich habe meine Oscam auf einen Debian Server mit extrenen Readern laufen, deswegen kenn ich die Hardware-Eigenheiten von OE nicht.

Müsste da so aussehen:
Entitlements for HD

[TABLE="class: statsentitle"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"]nagra[/TD]
[TD="colspan: 2"]2014-02-14[/TD]
[TD]FF FF FF FF [/TD]
[TD="colspan: 2"]00 00 34 11 (sysid)
00 00 00 00
00 00 80 11
[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]xx yy zz ww
[/TD]
[TD="colspan: 2"]DNASP142 RevGC6[/TD]
[TD="colspan: 4"]3F FF 95 00 FF 91 81 98 FE 47 23 44 4E 41 53 65 31 34 32 89 52 65 76 47 77 36 99
[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[TR="class: e_expired"]
[TD]tier[/TD]
[TD]1830[/TD]
[TD]008011[/TD]
[TD]0000000000000064[/TD]
[TD]00000000[/TD]
[TD]2010-10-09[/TD]
[TD]2011-10-10[/TD]
[TD]HDplus Paket [Nagra HD01][/TD]
[/TR]
[TR="class: e_expired"]
[TD]tier[/TD]
[TD]1830[/TD]
[TD]008011[/TD]
[TD]0000000000000065[/TD]
[TD]00000000[/TD]
[TD]1992-01-01[/TD]
[TD]1993-01-01[/TD]
[TD]HDplus Paket [Nagra HD01][/TD]
[/TR]
[TR="class: e_valid"]
[TD]tier[/TD]
[TD]1830[/TD]
[TD]008011[/TD]
[TD]0000000000000BEA[/TD]
[TD]00000000[/TD]
[TD]2011-10-27[/TD]
[TD]2015-01-04[/TD]
[TD]HDplus Paket [Nagra HD01]
[/TD]
[/TR]
[/TABLE]
 
Zuletzt bearbeitet:
AW: Conax Smardcard für Hallo TV

so habe es mal oben wie geändert


Entitlements for HALLO
[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"]conax[/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]FF FF FF FF[/TD]
[TD="colspan: 2"]00 00 00 00 (sysid)[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]xxxxx[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3B 34 94 00 30 42 30 30[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[TR="class: e_valid"]
[TD]package[/TD]
[TD]0B02[/TD]
[TD]000000[/TD]
[TD]0000000000001020[/TD]
[TD]01000001[/TD]
[TD]2013-12-01[/TD]
[TD]2013-12-31[/TD]
[TD]0B02:000000 unknown[/TD]
[/TR]
[/TABLE]
Entitlements for HD
[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"][/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]n/a[/TD]
[TD="colspan: 2"][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]xxxx[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4"]3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[/TABLE]


oscam.server
[reader]
label = HD
description = HD+
protocol = internal
device = /dev/sci0
autospeed = 1
caid = 1830
boxkey = A*********
rsakey = B***********************
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1

[reader]
label = HALLO
description = Hallo TV
protocol = internal
device = /dev/sci1
autospeed = 1
caid = 0B02
boxid = 12345678
detect = cd
mhz = 540
cardmhz = 2700
group = 2
emmcache = 1,1,2
blockemm-unknown = 1

- - - - - - - - - -
2013/12/25 19:25:53 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2062
2013/12/25 19:25:53 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/12/25 19:25:53 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/25 19:25:53 0 s signal handling initialized
2013/12/25 19:25:53 0 s HD [internal] creating thread for device /dev/sci0
2013/12/25 19:25:53 0 s HALLO [internal] creating thread for device /dev/sci1
2013/12/25 19:25:53 76E004F8 r HD [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=540, cardmhz=2700)
2013/12/25 19:25:53 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/25 19:25:53 0 s waiting for local card init
2013/12/25 19:25:53 76E02300 r HALLO [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=540, cardmhz=2700)
2013/12/25 19:25:53 919C20 h webif: decompressed 54551 bytes back into 156136 bytes
2013/12/25 19:25:53 919C20 h HTTP Server running. ip=0.0.0.0 port=16002
2013/12/25 19:25:54 76E004F8 r HD [internal] card detected
2013/12/25 19:25:54 76E02300 r HALLO [internal] card detected
2013/12/25 19:25:55 76E02300 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 19:25:55 76E02300 r HALLO [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
2013/12/25 19:25:55 76E02300 r HALLO [internal] Calculated work ETU is 11.85 us reader mhz = 540
2013/12/25 19:25:55 76E02300 r HALLO [internal] ATR Fsmax is 5 MHz, clocking card to 5.40 (specified in reader->mhz)
2013/12/25 19:25:55 76E004F8 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 19:25:55 76E004F8 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 19:25:55 76E004F8 r HD [internal] Calculated work ETU is 5.93 us reader mhz = 540
2013/12/25 19:25:55 76E004F8 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 5.40 (specified in reader->mhz)
2013/12/25 19:25:58 76E02300 r HALLO [internal] card system not supported
2013/12/25 19:25:58 76E02300 r HALLO [internal] Normal mode failed, reverting to Deprecated Mode
2013/12/25 19:25:59 76E02300 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 19:25:59 76E02300 r HALLO [internal] Init card protocol T0, FI=9, F=512, D=8, N=0
2013/12/25 19:25:59 76E02300 r HALLO [internal] Calculated work ETU is 68.89 us reader mhz = 540
2013/12/25 19:25:59 76E02300 r HALLO [internal] ATR Fsmax is 5 MHz, clocking card to 5.40 (specified in reader->mhz)
2013/12/25 19:26:00 76E02300 r HALLO [internal] type: Conax, caid: 0B02, serial: ##########, hex serial: ########, card: v64
2013/12/25 19:26:00 76E02300 r HALLO [internal] Providers: 1
2013/12/25 19:26:00 76E02300 r HALLO [internal] Provider: 1 Provider-Id: 000000
2013/12/25 19:26:00 76E02300 r HALLO [internal] Provider: 1 SharedAddress: ########
2013/12/25 19:26:00 76E02300 r HALLO [internal] found card system conax
2013/12/25 19:26:00 76E02300 r HALLO [conax] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2013/12/25 19:26:00 76E02300 r HALLO [conax] Package: 1, id: 1020, classes: 01000001, date: 2013/12/01 - 2013/12/31, name: Zone 2
2013/12/25 19:26:00 76E02300 r HALLO [conax] Package: 2, id: 1020, classes: 01000001, date: 2013/11/01 - 2013/11/30, name: Zone 2
2013/12/25 19:26:01 76E02300 r HALLO [conax] ready for requests
 
Zuletzt bearbeitet von einem Moderator:
Re: AW: Conax Smardcard für Hallo TV

Hallo läuft schon mal, bei HD+ ist der Log noch nicht vollständig. Du solltest ausserdem die Serials löschen, muss ja nicht jeder deine Kartennummer kennen.
 
AW: Conax Smardcard für Hallo TV

[TABLE="class: stats"]
[TR]
[TH="colspan: 3"]Cardsystem
[/TH]
[TH="colspan: 2"]Valid To[/TH]
[TH]IRD ID (nagra)[/TH]
[TH="colspan: 2"]Provider[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 3"]conax[/TD]
[TD="colspan: 2"]n/a[/TD]
[TD]FF FF FF FF[/TD]
[TD="colspan: 2"]00 00 00 00 (sysid)[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Serial[/TH]
[TH="colspan: 2"]Rom[/TH]
[TH="colspan: 4"]ATR[/TH]
[/TR]
[TR="class: e_header"]
[TD="colspan: 2"]xxxxxxxxx[/TD]
[TD="colspan: 2"][/TD]
[TD="colspan: 4, align: center"]3B 34 94 00 30 42 30 30[/TD]
[/TR]
[TR]
[TH]Type[/TH]
[TH]Caid[/TH]
[TH]Provid[/TH]
[TH]ID[/TH]
[TH]Class[/TH]
[TH]Start Date[/TH]
[TH]Expire Date[/TH]
[TH]Name[/TH]
[/TR]
[TR="class: e_valid"]
[TD]package[/TD]
[TD]0B02[/TD]
[TD]000000[/TD]
[TD]0000000000001020[/TD]
[TD]01000001[/TD]
[TD]2013-12-01[/TD]
[TD]2013-12-31[/TD]
[TD]0B02:000000 unknown[/TD]
[/TR]
[/TABLE]



aber bild usw läuft nicht !!!!
 
Zuletzt bearbeitet von einem Moderator:
Re: AW: Conax Smardcard für Hallo TV

Hast du denn mal auf HalloTv geschaltet und geschaut was im Webif bei Status steht? Irgendwie glaube ich dass diese mhz=540 nicht passen. Kommentier die Zeile mhz=540 in beiden Readern mit # mal aus und Oscam neu starten. Mal sehen was er dann sagt.
 
AW: Re: AW: Conax Smardcard für Hallo TV

2013/12/25 19:59:39 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5026
2013/12/25 19:59:39 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/12/25 19:59:39 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/25 19:59:39 0 s signal handling initialized
2013/12/25 19:59:39 0 s HD [internal] creating thread for device /dev/sci0
2013/12/25 19:59:39 0 s HALLO [internal] creating thread for device /dev/sci1
2013/12/25 19:59:39 5BA5B8 r HD [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=0, cardmhz=2700)
2013/12/25 19:59:39 5BC2B8 r HALLO [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=0, cardmhz=2700)
2013/12/25 19:59:39 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/25 19:59:39 0 s waiting for local card init
2013/12/25 19:59:39 5ACC20 h webif: decompressed 54551 bytes back into 156136 bytes
2013/12/25 19:59:39 5ACC20 h HTTP Server running. ip=0.0.0.0 port=16002
2013/12/25 19:59:40 5BA5B8 r HD [internal] card detected
2013/12/25 19:59:40 5BC2B8 r HALLO [internal] card detected
2013/12/25 19:59:41 5BC2B8 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 19:59:41 5BA5B8 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 19:59:41 5BA5B8 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 19:59:41 5BA5B8 r HD [internal] Calculated work ETU is inf us reader mhz = 0
2013/12/25 19:59:41 5BA5B8 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 0.00 (specified in reader->mhz)
 
Zuletzt bearbeitet von einem Moderator:
dann auch mal die cardmhz auskommentieren, bitte! Oder vbielleicht mal Kommentierung wegnehmen und mhz=357 oder 368 probieren.
 
2013/12/25 20:05:15 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5348
2013/12/25 20:05:15 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/12/25 20:05:15 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/12/25 20:05:15 0 s signal handling initialized
2013/12/25 20:05:15 0 s HD [internal] creating thread for device /dev/sci0
2013/12/25 20:05:15 0 s HALLO [internal] creating thread for device /dev/sci1
2013/12/25 20:05:15 5845B8 r HD [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=0, cardmhz=0)
2013/12/25 20:05:15 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/12/25 20:05:15 0 s waiting for local card init
2013/12/25 20:05:15 5862B8 r HALLO [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=0, cardmhz=0)
2013/12/25 20:05:15 576C20 h webif: decompressed 54551 bytes back into 156136 bytes
2013/12/25 20:05:15 576C20 h HTTP Server running. ip=0.0.0.0 port=16002
2013/12/25 20:05:16 5862B8 r HALLO [internal] card detected
2013/12/25 20:05:16 5845B8 r HD [internal] card detected
2013/12/25 20:05:17 5862B8 r HALLO [internal] ATR: 3B 34 94 00 30 42 30 30
2013/12/25 20:05:17 5845B8 r HD [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/12/25 20:05:17 5845B8 r HD [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/12/25 20:05:17 5845B8 r HD [internal] Calculated work ETU is inf us reader mhz = 0
2013/12/25 20:05:17 5845B8 r HD [internal] ATR Fsmax is 5 MHz, clocking card to 0.00 (specified in reader->mhz)

habe ich gemacht keine änderung! so ganz versteh ich das auch nicht bei oe 1,6 lief sie ohne probleme! hab soweit alles am laufen expander usw nur versteh es mit der hallo karte nicht!
 
Zuletzt bearbeitet von einem Moderator:
Vielleicht solltest du mal Doscam testen, das configuriert sich von alleine. Scheint auch so, dass das Auskommentieren nix bringt. Hast du mal versucht mhz=368 oder mhz=357 da einzutragen?
 
AW: Re: Conax Smardcard für Hallo TV

habe ich auch schon versucht !!! Keine änderung weder die hd karte geht unter os noch die hallo ???
 
Status
Für weitere Antworten geschlossen.
Zurück
Oben