Clienten bleiben dunkel

[kiwi1990]

AW: Clienten bleiben dunkel

Hier noch mal alle Config zusammengefasst.

Spoiler

oscam.version
​

Spoiler

Unix starttime: 1417719782
Starttime: 04.12.2014 20:03:02
Version: oscam-1.20-unstable_svn-r9986
Compiler: mipsel-oe-linux-ssl
ConfigDir: /etc/tuxbox/config/
WebifPort: 83


Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: no
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: yes
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no


camd 3.3x: yes
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes


Reader support: yes


Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes


cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes

oscam.conf
​

Spoiler

[global]
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
disableuserfile = 0
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/


[cache]


[cccam]
port = 22000
nodeid = 8E73167C102D1404
version = 2.3.0
reshare = 0
reshare_mode = 0
recv_timeout = 4000


[dvbapi]
enabled = 1
au = 1
delayer = 60
user = dvbapi_local
boxtype = dreambox


[webif]
httpport = 83
httpuser = USR
httppwd = PWD
httphelplang = de
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.0.255,255.255.255.255
httposcamlabel = Oscam WebInterface

oscam.user
​

Spoiler

[account]
user = dvbapi_local
au = 1
group = 1


[account]
user = USR
pwd = PWD
group = 1


[account]
user = USR
pwd = PWD
group = 1

oscam.server
​

Spoiler

[reader]
label = SKY_DE_V1X
description = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 534
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2


[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00&0F00,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

oscam.dvbapi
​

Spoiler

P: 098C

Auf den Klienten hab ich von hier leider keinen Zugriff.

 

[dodo83]

AW: Clienten bleiben dunkel

die Config sieht OK aus
kommt am Client immer noch keine Karte an?
dieser läuft mit CCCam?
im log am Server ist auch keine Anfrage?
poste mal dieses ab OScam Start bis zur Sender Anfrage

 

[kiwi1990]

AW: Clienten bleiben dunkel

Nein, der Client ist weiter dunkel
Dort läuft die Basisversion von 2.3.0. Nur C-Line eingegeben.

Hier der Server-Log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Dec 4 20:03:02 2014
-------------------------------------------------------------------------------
2014/12/04 20:03:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9986 (mipsel-oe-linux-ssl)
2014/12/04 20:03:02 0 s creating pidfile /tmp/oscam.pid with pid 710
2014/12/04 20:03:02 0 s [Emu] OSEmu (built-in) version 706
2014/12/04 20:03:02 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/12/04 20:03:02 0 s signal handling initialized
2014/12/04 20:03:02 0 s cccam: initialized (fd=5, port=22000)
2014/12/04 20:03:02 0 s SKY_DE_V1X [internal] creating thread for device /dev/sci0
2014/12/04 20:03:02 0 s emulator [emu] creating thread for device emulator
2014/12/04 20:03:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/04 20:03:02 0 s anti cascading disabled
2014/12/04 20:03:02 76E00468 r SKY_DE_V1X [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=534, cardmhz=357)
2014/12/04 20:03:02 76E023E0 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/12/04 20:03:02 76E042F8 c plain dvbapi-client granted (dvbapi_local, au=auto (2 reader))
2014/12/04 20:03:02 76E042F8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/12/04 20:03:02 53CD68 h webif: decompressed 157215 bytes back into 372672 bytes
2014/12/04 20:03:02 53CD68 h HTTP Server running. ip=0.0.0.0 port=83
2014/12/04 20:03:03 76E00468 r SKY_DE_V1X [internal] card detected
2014/12/04 20:03:03 76E023E0 r emulator [emu] card detected
2014/12/04 20:03:03 76E00468 r SKY_DE_V1X [internal] using sh4 or old reset
2014/12/04 20:03:03 76E00468 r SKY_DE_V1X [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/12/04 20:03:03 76E00468 r SKY_DE_V1X [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/12/04 20:03:03 76E00468 r SKY_DE_V1X [internal] Calculated work ETU is 4.35 us reader mhz = 534
2014/12/04 20:03:04 76E023E0 r emulator [emu] found card system emu
2014/12/04 20:03:04 76E023E0 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/04 20:03:06 76E07D10 c encrypted cccam-client IPDESCLIENT granted (USR, au=off)
2014/12/04 20:03:07 76E00468 r SKY_DE_V1X [internal] Sended reader settings T=0 fs=372 ETU=23 WWT=230400 CWT=0 BWT=0 EGT=2 clock=0 check=0 P=5 I=50 U=0
2014/12/04 20:03:07 76E00468 r SKY_DE_V1X [internal] ATR Fsmax is 5 MHz, clocking card to 5.34 (specified in reader->mhz)
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Card type: P1TV
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Rom version: 20AA
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Credit available on card: 0 euro
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Extended 4C detected
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] FuseByte: 25
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Region Code: 00BO0102
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Country Code: DEU
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Pincode read: 4243
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] PCB settings: FF FF FF FF
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] Parental control disabled
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] ready for requests
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [internal] found card system videoguard2
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] card detected
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 0046, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 0065, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 0066, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 0067, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 0068, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 006f, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 007b, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 008e, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00c0, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00c7, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00c8, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00c9, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00ca, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00f3, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00fa, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:08 76E00468 r SKY_DE_V1X [videoguard2] tier: 00ff, expiry date: 2015/02/11-00:00:00
2014/12/04 20:03:20 76E042F8 c [ADD PID 0] CAID: 1830 ECM_PID: 1CEC PROVID: 000000
2014/12/04 20:03:20 76E042F8 c [ADD PID 1] CAID: 1843 ECM_PID: 19EC PROVID: 000000
2014/12/04 20:03:20 76E042F8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1BEC PROVID: 000000
2014/12/04 20:03:20 76E042F8 c [ADD PID 3] CAID: 098C ECM_PID: 1AEC PROVID: 000000
2014/12/04 20:03:20 76E042F8 c [ADD PID 4] CAID: 1860 ECM_PID: 1EEC PROVID: 000000
2014/12/04 20:03:20 76E042F8 c Found 5 ECMpids and 5 STREAMpids in PMT
2014/12/04 20:03:20 76E042F8 c [DVBAPI] Receiver wants to demux srvid EF75 on adapter 0000 camask 0001 index 0000 pmtpid 0061

Hoffe da fehlt nix

 

[dodo83]

AW: Clienten bleiben dunkel

würde gern mehr sehen wie sich der Client anmeldet zum Beispiel
zur Sender Anfrage kommt es nicht von ihm im log?

 

[Derek Buegel]

AW: Clienten bleiben dunkel

... in der oscam.dvbapi felht die ignoriere I: 0. Dann wird aber orf nicht mehr hell. Dann noch den Eintrag 0d05 hin zu fügen. hat aber nichts mit Deinem Problem zu tun.

Spoiler

P: 098C
P: 0D05
I: 0

Ja, bitte Log posten, wenn ein cccam-Client zugreift.

MfG

 

[kiwi1990]

AW: Clienten bleiben dunkel

Danke Leute, es läuft nun. Weiß aber nicht woran es genau lag.

Alle Klienten sind verbunden und hell! Vielen Dank!