Cccam Server dvbapi - not found

[maxdor]

Hallo,

ich versuche mich über einen Octagon 1008HD zu einem Cccam Server (2.3.0) zu verbinden. Verbindung mit dem Server bekomme ich, allerdings wird der Sender nicht frei (Sky, S02). Ich denke, dass ich einen Fehler in der dvbapi habe.

Conf

Spoiler

[global]
pidfile = /tmp/oscam.pid
logfile = stdout
disablelog = 1
disableuserfile = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 0
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0
resolvegethostbyname = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
request_mode = 0

[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httprefresh = 0
httpallowed = 192.168.0.1-192.168.255.255
httphideidleclients = 0
httpreadonly = 0

Server

Spoiler

[reader]
label = server
enable = 1
protocol = cccam
device = ip,12000
account = di,da
services =
inactivitytimeout = 1
caid =
ident =
group = 1
ecmcache = 1
lb_weight = 100
cccversion = 2.3.0
cccmaxhops = 10

User

Spoiler

[account]
user = dvbapi
pwd = dvbapi
group = 1

Log

Spoiler

2012/09/08 12:20:18 735 c01 stapi: filter set demux_id 1, num 0, pid 19ba
2012/09/08 12:20:18 735 c01 dvbapi (1861&000000/0081/8E:5276): not found (366 ms)
2012/09/08 12:20:18 735 c01 stapi: try pids again #2
2012/09/08 12:20:18 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:18 735 c01 stapi: filter set demux_id 1, num 0, pid 18ba
2012/09/08 12:20:22 735 c01 dvbapi (1833&000000/0081/89:0C95): not found (137 ms)
2012/09/08 12:20:22 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:22 735 c01 stapi: filter set demux_id 1, num 0, pid 1cba
2012/09/08 12:20:22 735 c01 dvbapi (1834&000000/0081/89:ED44): not found (388 ms)
2012/09/08 12:20:22 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:22 735 c01 stapi: filter set demux_id 1, num 0, pid 1bba
2012/09/08 12:20:23 735 c01 dvbapi (09C4&000000/0081/95:636E): not found (343 ms)
2012/09/08 12:20:23 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:23 735 c01 stapi: filter set demux_id 1, num 0, pid 1dba
2012/09/08 12:20:23 735 c01 dvbapi (09C7&000000/0081/A6803): not found (345 ms)
2012/09/08 12:20:23 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:23 735 c01 stapi: filter set demux_id 1, num 0, pid 1fba
2012/09/08 12:20:24 735 c01 dvbapi (09AF&000000/0081/92:FD21): not found (347 ms)
2012/09/08 12:20:24 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:24 735 c01 stapi: filter set demux_id 1, num 0, pid 1aba
2012/09/08 12:20:24 735 c01 dvbapi (098C&000000/0081/968DF): not found (351 ms)
2012/09/08 12:20:24 735 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 12:20:24 735 c01 stapi: filter set demux_id 1, num 0, pid 19ba
2012/09/08 12:20:25 735 c01 dvbapi (1861&000000/0081/8E:2467): not found (405 ms)
2012/09/08 12:20:25 735 c01 stapi: try pids again #3
2012/09/08 12:20:25 735 c01 stapi: can't decode channel
2012/09/08 12:20:25 735 c01 stapi: filter removed demux_id 1, num 0

Leider weiß ich nicht mehr weiter

 

[NeroZ]

AW: Cccam Server dvbapi - not found

boxtype

Sie müssen registriert sein, um Links zu sehen.

Parameter wird benötigt
Verwendete Box auf der DVB API aktiviert wurde.
Beispiel:

boxtype = ufs910 boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc Default: boxtype = dreambox
Hinweis: pc steht für generic pc support (laufend supported bei VDR mit vdr-plugin-dvbapi)

aber welchen du brauchst, weiß ich leider nicht

so habe ich das:
oscam.conf

Spoiler

[dvbapi]
enabled = 1
au = 1
boxtype = ?????
user = local

oscam.user

Spoiler

[account]
user = local
pwd = local
group = 1
au = 1
keepalive = 1

 

[maxdor]

AW: Cccam Server dvbapi - not found

Danke für die Antwort!

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
request_mode = 0

Meinst du hier?

 

[Trollhunter]

AW: Cccam Server dvbapi - not found

Hi,
was mir noch aufgefallen ist machmal

[reader]
label = server
enable = 1
protocol = cccam
device = ip,12000
user = di
password = da
services =
inactivitytimeout = 1
caid =
ident =
group = 1
ecmcache = 1
lb_weight = 100
cccversion = 2.3.0
cccmaxhops = 10

anstatt account!!

 

[maxdor]

AW: Cccam Server dvbapi - not found

Habe ich versucht, aber dann bekomme ich keine Verbindung zu dem Cccam Server.

 

[NeroZ]

AW: Cccam Server dvbapi - not found

Hi,
was mir noch aufgefallen ist machmal

user = di
password = da

anstatt account!!

jo, user / passwort ist auch richtig


@maxdor getestet ?
Problem Cccam Server dvbapi - not found

 

[maxdor]

AW: Cccam Server dvbapi - not found

@NeroZ

Ja, mit dreambox, ufs910 und duckbox, keine Funktion bis jetzt.

 

[Mogelhieb]

AW: Cccam Server dvbapi - not found

Probiere mal:

[dvbapi]
enabled = 1
au = 1
boxtype = none
user = user




[account]
User = user
#Pwd = userpw
Group = 1
CAID =
AU = 1

Für den DVB Api User wird kein Passwort benötigt.

Gehe mal ins Webinterface und schau Dir an welche Fehlermeldung kommt.

 

[maxdor]

AW: Cccam Server dvbapi - not found

Hi,

probiert, Fehler bleibt der gleiche

Spoiler

2012/09/08 15:02:36 419 c01 stapi: filter set demux_id 1, num 0, pid 19ba
2012/09/08 15:02:36 419 c01 user (1861&000000/0081/8E:157B): not found (287 ms)
2012/09/08 15:02:36 419 c01 stapi: try pids again #2
2012/09/08 15:02:36 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:36 419 c01 stapi: filter set demux_id 1, num 0, pid 18ba
2012/09/08 15:02:40 419 c01 user (1833&000000/0081/89:37BD): not found (292 ms)
2012/09/08 15:02:40 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:40 419 c01 stapi: filter set demux_id 1, num 0, pid 1cba
2012/09/08 15:02:41 419 c01 user (1834&000000/0081/89:F45C): not found (293 ms)
2012/09/08 15:02:41 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:41 419 c01 stapi: filter set demux_id 1, num 0, pid 1bba
2012/09/08 15:02:41 419 c01 user (09C4&000000/0081/90:EB2B): not found (496 ms)
2012/09/08 15:02:41 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:41 419 c01 stapi: filter set demux_id 1, num 0, pid 1dba
2012/09/08 15:02:42 419 c01 user (09C7&000000/0081/A6:9A58): not found (497 ms)
2012/09/08 15:02:42 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:42 419 c01 stapi: filter set demux_id 1, num 0, pid 1fba
2012/09/08 15:02:42 419 c01 user (09AF&000000/0081/8D:7BED): not found (252 ms)
2012/09/08 15:02:42 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:42 419 c01 stapi: filter set demux_id 1, num 0, pid 1aba
2012/09/08 15:02:43 419 c01 user (098C&000000/0081/91:F483): not found (252 ms) oscam.dvbapi
2012/09/08 15:02:43 419 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 15:02:43 419 c01 stapi: filter set demux_id 1, num 0, pid 19ba
2012/09/08 15:02:43 419 c01 user (1861&000000/0081/8E:2DE3): not found (305 ms)
2012/09/08 15:02:43 419 c01 stapi: try pids again #3
2012/09/08 15:02:43 419 c01 stapi: can't decode channel
2012/09/08 15:02:43 419 c01 stapi: filter removed demux_id 1, num 0

Benötige ich eine oscam.dvbapi?

 

[Trollhunter]

AW: Cccam Server dvbapi - not found

Ja versuche mal weil der fragt ja alle mögliche an Caids ab!!!

 

[breitflansch]

AW: Cccam Server dvbapi - not found

vor allem fragt er nicht die 1702, oder das log ist abgeschnitten..

[account]
user = dvbapi
pwd =
group = 1
betatunnel = 1833.FFFF:1702

 

[Pilot]

AW: Cccam Server dvbapi - not found

na dann schreib doch in den account caid = 1702,1833


Mlg piloten

 

[maxdor]

AW: Cccam Server dvbapi - not found

@ breitflansch

Danke jetzt geht die S02

Bekomme ich auch die HD02 so iwie frei? Habe das vor einiger Zeit schon mal versucht, leider ohne Erfolg.

 

[Trollhunter]

AW: Cccam Server dvbapi - not found

Hast Du nun schon ne oscam.dvbapi angelegt???
Dann machmal:

P: 1702
P: 1833
P: 1843

 

[maxdor]

AW: Cccam Server dvbapi - not found

Nein, habe ich dann jetzt erstellt.

HD+ geht nicht.

Log

Spoiler

2012/09/08 16:25:53 559 c01 stapi: new program number: 0081 (Sky Sport HD 1)
2012/09/08 16:25:53 559 c01 stapi: filter set demux_id 1, num 0, pid 18ba
2012/09/08 16:25:53 558 p02 cccam(r) server: sending ecm for sid 0081(147) to card 00000065, hop 1, ecmtask 7
2012/09/08 16:25:54 559 c01 user (1702&000000/0081/93:C9BF): found (1075 ms) by server(btun)
2012/09/08 16:25:54 559 c01 stapi: Start descrambling PID #18BA (CAID: 1833)
2012/09/08 16:25:54 559 c01 stapi: filter set demux_id 1, num 1, pid 1
2012/09/08 16:25:54 559 c01 stapi: filter removed demux_id 1, num 1
2012/09/08 16:25:58 559 c01 stapi: filter set demux_id 1, num 1, pid 1002
2012/09/08 16:25:58 559 c01 stapi: filter set demux_id 1, num 2, pid 1002
2012/09/08 16:25:58 559 c01 stapi: filter set demux_id 1, num 3, pid 1002
2012/09/08 16:25:58 558 p02 cccam(r) server: sending ecm for sid 0081(147) to card 00000065, hop 1, ecmtask 8
2012/09/08 16:25:58 559 c01 user (1702&000000/0081/93:ACFF): found (711 ms) by server(btun)
2012/09/08 16:26:05 559 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 16:26:05 559 c01 stapi: filter removed demux_id 1, num 1
2012/09/08 16:26:05 559 c01 stapi: filter removed demux_id 1, num 2
2012/09/08 16:26:05 559 c01 stapi: filter removed demux_id 1, num 3
2012/09/08 16:26:06 559 c01 stapi: found new PMT_FILE /tmp/pmt2_1.tmp, pmt_cnt: 3
2012/09/08 16:26:06 559 c01 stapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CAA PROVID: 000000
2012/09/08 16:26:06 559 c01 stapi: new program number: EF15 (1830:EF15 unknown)
2012/09/08 16:26:06 559 c01 stapi: filter set demux_id 1, num 0, pid 1caa
2012/09/08 16:26:07 558 p02 cccam(r) server: no suitable card on server (auto blocked)
2012/09/08 16:26:07 559 c01 user (1830&000000/EF15/92C6E): rejected reader peer (309 ms)
2012/09/08 16:26:07 559 c01 stapi: try pids again #1
2012/09/08 16:26:07 559 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 16:26:07 559 c01 stapi: filter set demux_id 1, num 0, pid 1caa
2012/09/08 16:26:09 558 p02 cccam(r) server: no suitable card on server (auto blocked)
2012/09/08 16:26:09 559 c01 user (1830&000000/EF15/92:FF4E): rejected reader peer (231 ms)
2012/09/08 16:26:09 559 c01 stapi: try pids again #2
2012/09/08 16:26:09 559 c01 stapi: filter removed demux_id 1, num 0
2012/09/08 16:26:09 559 c01 stapi: filter set demux_id 1, num 0, pid 1caa
2012/09/08 16:26:17 558 p02 cccam(r) server: no suitable card on server (auto blocked)
2012/09/08 16:26:17 559 c01 user (1830&000000/EF15/92:ECC3): rejected reader peer (274 ms)
2012/09/08 16:26:17 559 c01 stapi: try pids again #3
2012/09/08 16:26:17 559 c01 stapi: can't decode channel
2012/09/08 16:26:17 559 c01 stapi: filter removed demux_id 1, num 0