Hi Leute.
Mein easymouse ist kaputt gegangen und regiert nicht mehr. Davor hat alles wunderbar funktioniert.
Nun habe ich einen SmartReader Smargo V2 angeschlossen, bekomme den aber nicht zu laufen.
Hier mal mein Log:
Hier mal meine neue Server-Config:
Mein easymouse ist kaputt gegangen und regiert nicht mehr. Davor hat alles wunderbar funktioniert.
Nun habe ich einen SmartReader Smargo V2 angeschlossen, bekomme den aber nicht zu laufen.
Hier mal mein Log:
- 2010/01/02 06:41:05 0 s (main) Version = #1 SMP PREEMPT Thu Jan 8 15:40:40 CET 2015
- 2010/01/02 06:41:05 0 s (main) Machine = armv7l
- 2010/01/02 06:41:05 0 s (main) The current system time is smaller than the build date (Jan 26 2015). Waiting up to 60 seconds for time to correct
- 2010/01/02 06:42:06 0 s (main) Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
- 2010/01/02 06:42:06 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 17704
- 2010/01/02 06:42:06 0 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
- 2010/01/02 06:42:06 0 s (main) signal handling initialized
- 2010/01/02 06:42:06 0 s (net) newcamd: initialized (fd=5, port=34000)
- 2010/01/02 06:42:06 0 s (net) -> CAID: 098C PROVID: 001235, 000000
- 2010/01/02 06:42:06 0 s (net) cccam: initialized (fd=6, port=55555)
- 2010/01/02 06:42:06 0 s (reader) skyv14 [smargo] creating thread for device /dev/ttyUSB0
- 2010/01/02 06:42:06 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
- 2010/01/02 06:42:06 0 s (anticasc) anti cascading disabled
- 2010/01/02 06:42:06 15A1278 h (webif) webif: decompressed 152936 bytes back into 374000 bytes
- 2010/01/02 06:42:06 15A1278 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
- 2010/01/02 06:42:06 15B3298 r (reader) skyv14 [smargo] smargo init type is smargo
- 2010/01/02 06:42:06 15B3298 r (reader) skyv14 [smargo] Buffers readed 0 bytes total time_us 75129
- 2010/01/02 06:42:06 15B3298 r (reader) skyv14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=369)
- 2010/01/02 06:42:07 15B3298 r (reader) skyv14 [smargo] card detected
- 2010/01/02 06:42:15 15B3298 r (reader) skyv14 [smargo] Error activating card.
- 2010/01/02 06:42:33 15B3298 r (-) -- Skipped 2 duplicated log lines --
- 2010/01/02 06:42:33 15B3298 r (reader) skyv14 [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
- 2010/01/02 06:42:33 15B3298 r (reader) skyv14 [smargo] card initializing error
Hier mal meine neue Server-Config:
[reader]
label = skyv14
protocol = smargo
device = /dev/ttyUSB0
#smargopatch = 1
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz: 600
cardmhz = 357
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2
label = skyv14
protocol = smargo
device = /dev/ttyUSB0
#smargopatch = 1
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz: 600
cardmhz = 357
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2