Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Bekomme V14 nicht zum laufen!!!

    Nobody is reading this thread right now.
K

Kubschi

Ist gelegentlich hier
Registriert
30. November 2007
Beiträge
38
Reaktionspunkte
0
Punkte
26
Hallo Leute, komme nicht weiter.

Ich habe jetzt eine V14 mit Reciver bekommen und will die in meiner DM800 laufen lassen mit oscam.

Ich habe im Internen Schacht eine HD+ Schwarz, die läuft. Einen CCcam Server Der mir 09c7 kdhome, 1722 Sky und 1834 SkyHD shart, da leufen die HD sender nicht, er hat die CCcam und Oscam als Betatunnel laufen. wo ich noch die CCcam hatte ging das mit Sky HD.
und die V14 steht immer auf error. sieht einer mein fehler???
Danke

Log
2014/07/09 19:54:09 5DE198 r V14 [mouse] card detected
2014/07/09 19:54:13 5DE198 r V14 [mouse] ATR: 3F FD u.s.w
2014/07/09 19:54:23 5DE198 r V14 [mouse] Init card protocol T2, FI=1, F=372, D=4, N=64
2014/07/09 19:54:23 5DE198 r V14 [mouse] Setting baudrate to 38400 bps
2014/07/09 19:54:23 5DE198 r V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/07/09 19:54:23 5DE198 r V14 [mouse] ERROR: Parse_ATR returned error
2014/07/09 19:54:23 5DE198 r V14 [mouse] Error activating card.
2014/07/09 19:54:26 5DE198 r V14 [mouse] ATR: 3F FD u.s.w
2014/07/09 19:54:26 5DE198 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/07/09 19:54:26 5DE198 r V14 [mouse] Setting baudrate to 38400 bps
2014/07/09 19:54:26 5DE198 r V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/07/09 19:54:26 5DE198 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/07/09 19:54:47 5DE198 r V14 [mouse] card system not supported
2014/07/09 19:54:47 5DE198 r V14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/07/09 19:54:51 5DE198 r V14 [mouse] ATR: 3F FD u.s.w
2014/07/09 19:54:51 5DE198 r V14 [mouse] Init card protocol T2, FI=1, F=372, D=4, N=64
2014/07/09 19:54:51 5DE198 r V14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/07/09 19:54:51 5DE198 r V14 [mouse] ERROR: Parse_ATR returned error
2014/07/09 19:54:51 5DE198 r V14 [mouse] Error activating card.
2014/07/09 19:54:53 5DE198 r V14 [mouse] ATR: 3F FD u.s.w
2014/07/09 19:54:53 5DE198 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/07/09 19:54:53 5DE198 r V14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/07/09 19:54:54 5DE198 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/07/09 19:55:15 5DE198 r V14 [mouse] card system not supported
2014/07/09 19:55:15 5DE198 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/09 19:55:15 5DE198 r V14 [mouse] card initializing error

Conf
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log;stdout
emmlogdir = /var/log/
maxlogsize = 256

[webif]
HttpPort = XXXX
HttpUser = User
HttpPWD = Passw
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.2.2-192.168.255.255
HttpReadOnly = 1

[cccam]
Port = 23123
Reshare = 2
Ignorereshare = 0
Version = 2.1.1
Stealth = 1

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

Server
[reader]
label = HDplusHD02
protocol = internal
device = /dev/sci0
detect = CD
cardmhz = 2700
autospeed = 1
caid = 1843
rsakey = BFXXXXXXXD5
boxkey = A7XXXXXXC
group = 1
emmcache = 1,1,2

[reader]
label = V14
protocol = mouse
device = /dev/ttyUSB0
detect = CD
cardmhz = 357
caid = 098C
boxid = 12345678
ins7e11 = 15
group = 3
autospeed = 0
detect = cd
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-27,32,34,36-37,61-68,70-120,122,124-125,127,137-255
saveemm-u = 1
ndsversion = 2

[reader]
label = CCcamRemote1
protocol = cccam
device = dyndns.org,23243
user = User
password = Passw
caid = 1834,1722,09c7
cccreshare = 3
ccckeepalive = 1
group = 4

User
[account]
user = lokal
au = 0
group = 3
[account]
User = User1
Pwd = Passw
Group = 1,3
AU = V14
cccmaxhops = 1
[account]
User = User2
Pwd = Passw2
Group = 4
AU = 0
betatunnel = 1834.FFFF:1722
cccmaxhops = 1
 
AW: Bekomme V14 nicht zum laufen!!!

hi,
welche OScam version ist am laufen?
und wie ist der Reader eingestellt für die Karte
 
AW: Bekomme V14 nicht zum laufen!!!

Welche oscam version hast du laufen?
Im welchen Reader steckt die V14?

Und poste bitte ein vollständiges LOG vom oscam start bis zum Fehler!!
PS: ATR bitte nicht unkenntlich machen!!!
 
AW: Bekomme V14 nicht zum laufen!!!

Oscam r9780

V14 ist im smargo

Log
  • 2014/07/09 19:54:09 5DE198 r V14 [mouse] card detected
  • 2014/07/09 19:54:13 5DE198 r V14 [mouse] ATR: 3F FD 13 25 40 02 E0 41 02 40 69 FF 40 F0 00 00 50 31 03 58
  • 2014/07/09 19:54:23 5DE198 r V14 [mouse] Init card protocol T2, FI=1, F=372, D=4, N=64
  • 2014/07/09 19:54:23 5DE198 r V14 [mouse] Setting baudrate to 38400 bps
  • 2014/07/09 19:54:23 5DE198 r V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
  • 2014/07/09 19:54:23 5DE198 r V14 [mouse] ERROR: Parse_ATR returned error
  • 2014/07/09 19:54:23 5DE198 r V14 [mouse] Error activating card.
  • 2014/07/09 19:54:26 5DE198 r V14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2014/07/09 19:54:26 5DE198 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2014/07/09 19:54:26 5DE198 r V14 [mouse] Setting baudrate to 38400 bps
  • 2014/07/09 19:54:26 5DE198 r V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
  • 2014/07/09 19:54:26 5DE198 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2014/07/09 19:54:47 5DE198 r V14 [mouse] card system not supported
  • 2014/07/09 19:54:47 5DE198 r V14 [mouse] Normal mode failed, reverting to Deprecated Mode
  • 2014/07/09 19:54:51 5DE198 r V14 [mouse] ATR: 3F FD 13 25 40 02 E0 41 02 40 69 FF 40 F0 00 00 50 31 03 58
  • 2014/07/09 19:54:51 5DE198 r V14 [mouse] Init card protocol T2, FI=1, F=372, D=4, N=64
  • 2014/07/09 19:54:51 5DE198 r V14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
  • 2014/07/09 19:54:51 5DE198 r V14 [mouse] ERROR: Parse_ATR returned error
  • 2014/07/09 19:54:51 5DE198 r V14 [mouse] Error activating card.
  • 2014/07/09 19:54:53 5DE198 r V14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
  • 2014/07/09 19:54:53 5DE198 r V14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
  • 2014/07/09 19:54:53 5DE198 r V14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
  • 2014/07/09 19:54:54 5DE198 r V14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
  • 2014/07/09 19:55:15 5DE198 r V14 [mouse] card system not supported
  • 2014/07/09 19:55:15 5DE198 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2014/07/09 19:55:15 5DE198 r V14 [mouse] card initializing error
 
AW: Bekomme V14 nicht zum laufen!!!

Wie ist der Smargo konfiguriert?

Das ist kein vollständiges LOG. Das beginnt immer mit dem oscam Start
Zu finden im WebIf uner 'Files' und dann 'Logfile'

Nimm mal den fastmode raus

Code: 
# ins7e11 = 15
 
Smargo v2 so direkt angeschlossen
Log
>> OSCam << cardserver started at Wed Jul 9 20:24:31 2014
-------------------------------------------------------------------------------
2014/07/09 20:24:31 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9780 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/07/09 20:24:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 19590
2014/07/09 20:24:31 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2014/07/09 20:24:31 0 s userdb reloaded: 21 accounts loaded, 0 expired, 0 disabled
2014/07/09 20:24:31 0 s signal handling initialized
2014/07/09 20:24:31 0 s 446 service-id's loaded in 20ms
2014/07/09 20:24:31 0 s 1000 provid's loaded
2014/07/09 20:24:31 0 s 22 lengths for caid guessing loaded
2014/07/09 20:24:31 0 s cccam: initialized (fd=5, port=XXXXXX)
2014/07/09 20:24:31 0 s HDplusHD02 [internal] creating thread for device /dev/sci0
2014/07/09 20:24:31 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
2014/07/09 20:24:32 2B100480 h webif: decompressed 151915 bytes back into 363072 bytes
2014/07/09 20:24:32 2B100480 h HTTP Server running. ip=0.0.0.0 port=XXXX
2014/07/09 20:24:32 5C17A0 r HDplusHD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/07/09 20:24:32 0 s CCcamRemote1 [cccam] creating thread for device schweigi1879.dlinkddns.com
2014/07/09 20:24:32 0 s waiting for local card init
2014/07/09 20:24:32 5DFEC0 p Dyndns.org
2014/07/09 20:24:32 5DFEC0 p CCcamRemote1 [cccam] connecting to dyndns.org:XXXXX
2014/07/09 20:24:32 5DFEC0 p CCcamRemote1 [cccam] proxy initialized, server dyndns.org:XXXXX
2014/07/09 20:24:32 5DE090 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/07/09 20:24:33 5C17A0 r HDplusHD02 [internal] card detected
2014/07/09 20:24:33 5DE090 r V14 [mouse] card detected
2014/07/09 20:24:34 5C17A0 r HDplusHD02 [internal] ATR: 3F FF XX XX XX XX
2014/07/09 20:24:34 5C17A0 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/07/09 20:24:34 5C17A0 r HDplusHD02 [internal] TEST tempo mhz check = 500 mhz
2014/07/09 20:24:34 5C17A0 r HDplusHD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/07/09 20:24:34 5C17A0 r HDplusHD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/07/09 20:24:34 5C17A0 r HDplusHD02 [internal] Card responded ok for ifsd request of 160
2014/07/09 20:24:35 5C17A0 r HDplusHD02 [internal] detect native nagra card
2014/07/09 20:24:36 5DE090 r V14 [mouse] ATR: 3F FD 13 25 40 02 E0 41 02 40 69 FF 40 F0 00 00 50 31 03 58
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [internal] found card system nagra
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] ROM: D N A S P 1 8 0
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] REV: M e r 0 0 0
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] SER: ############
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] CAID: 1843
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] Prv.ID: 00 00 00 00
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] IRD ID: ############
2014/07/09 20:24:36 5C17A0 r HDplusHD02 [nagra] active to: 2014/08/27 12:59
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] -----------------------------------------
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] |id |tier |valid from |valid to |
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] +----+--------+------------+------------+
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] |8011|0066 |2012/08/12 |2013/08/13 |
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] |8011|0BEA |2013/08/12 |2014/09/17 |
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] -----------------------------------------
2014/07/09 20:24:37 5C17A0 r HDplusHD02 [nagra] ready for requests
2014/07/09 20:24:46 5DE090 r V14 [mouse] Init card protocol T2, FI=1, F=372, D=4, N=64
2014/07/09 20:24:46 5DE090 r V14 [mouse] Setting baudrate to 38400 bps
2014/07/09 20:24:46 5DE090 r V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/07/09 20:24:46 5DE090 r V14 [mouse] ERROR: Parse_ATR returned error
2014/07/09 20:24:46 5DE090 r V14 [mouse] Error activating card.
2014/07/09 20:24:50 5DE090 r V14 [mouse] ATR: 3F FD 13 25 40 02 E0 41 02 40 69 FF 40 F0 00 00 50 31 03 58
2014/07/09 20:25:01 5DE090 r V14 [mouse] Init card protocol T2, FI=1, F=372, D=4, N=64
2014/07/09 20:25:01 5DE090 r V14 [mouse] Setting baudrate to 38400 bps
2014/07/09 20:25:01 5DE090 r V14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/07/09 20:25:01 5DE090 r V14 [mouse] ERROR: Parse_ATR returned error
2014/07/09 20:25:01 5DE090 r V14 [mouse] Error activating card.
2014/07/09 20:25:03 5DE090 r V14 [mouse] ATR: 3F FD 13 25 02 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00
2014/07/09 20:25:03 5DE090 r V14 [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/07/09 20:25:03 5DE090 r V14 [mouse] Init card protocol T13, FI=1, F=372, D=1, N=2
2014/07/09 20:25:03 5DE090 r V14 [mouse] Setting baudrate to 9600 bps
2014/07/09 20:25:04 5DE090 r V14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/07/09 20:25:04 5DE090 r V14 [mouse] ERROR: Parse_ATR returned error
2014/07/09 20:25:04 5DE090 r V14 [mouse] Error activating card.
2014/07/09 20:25:04 5DE090 r V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/09 20:25:04 5DE090 r V14 [mouse] card initializing error
2014/07/09 20:25:05 0 s init for all local cards done
2014/07/09 20:25:05 0 s anti cascading disabled

fastmode raus, hat leider nix gebracht

# ins7e11 = 15

So das problem das Sky hd nicht ging habe ich gelöst und gleich ein neues jetzt geht kdhome nicht, wenn man auf Sat1 HD schaltet fragt er1834 und nicht 09c7 ab.
habe nur die cccmaxhops auf 2 gestellt und den Betatunnel rausgenommen.
welche einstellungen sollte den der Smargo v2 haben???

[account]
user = lokal
au = 0
group = 3
[account]
User = User1
Pwd = Passw
Group = 1,3
AU = V14
cccmaxhops = 1
[account]
User = User2
Pwd = Passw2
Group = 4
AU = 0
cccmaxhops = 2
 
Zuletzt bearbeitet von einem Moderator:
AW: Bekomme V14 nicht zum laufen!!!

probier den Smargo per Smartreader protocol und Serial einzubinden
 
AW: Bekomme V14 nicht zum laufen!!!

und unter device die Serial
Code: 
[COLOR=#333333]protocol = smartreader[/COLOR]
[COLOR=#333333]device = Serial:Reader xxxxxxxx[/COLOR]
ab Firmware 1.07 muss diese 8stellig sein
 
ich bekomm meine serialnummer nicht raus?

uber telnet den befehl:
cat /proc/bus/usb/devices

T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 5.00
S: Manufacturer=Argolis BV
S: Product=Smartreader2 plus
S: SerialNumber=
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

so muß das für v2

protocol = smartreader
device = SRv2;Serial:xxxxxxxx

Log

>> OSCam << cardserver started at Wed Jul 9 23:04:08 2014
-------------------------------------------------------------------------------
2014/07/09 23:04:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9780 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/07/09 23:04:08 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7940
2014/07/09 23:04:08 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2014/07/09 23:04:08 0 s userdb reloaded: 21 accounts loaded, 0 expired, 0 disabled
2014/07/09 23:04:08 0 s signal handling initialized
2014/07/09 23:04:08 0 s 446 service-id's loaded in 93ms
2014/07/09 23:04:09 0 s 1000 provid's loaded
2014/07/09 23:04:09 0 s 22 lengths for caid guessing loaded
2014/07/09 23:04:09 0 s cccam: initialized (fd=5, port=XXXXX)
2014/07/09 23:04:09 0 s HDplusHD02 [internal] creating thread for device /dev/sci0
2014/07/09 23:04:09 0 s V14 [smartreader] creating thread for device SRv2;Serial:XXXXXXXX
2014/07/09 23:04:09 5DFFC8 h webif: decompressed 151915 bytes back into 363072 bytes
2014/07/09 23:04:09 5C16E0 r HDplusHD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/07/09 23:04:09 0 s CCcamRemote1 [cccam] creating thread for device Dyndns
2014/07/09 23:04:09 0 s waiting for local card init
2014/07/09 23:04:09 5DFFC8 h HTTP Server running. ip=0.0.0.0 port=XXXX
2014/07/09 23:04:09 5E3958 p Dyndns
2014/07/09 23:04:09 5E3958 p CCcamRemote1 [cccam] connecting toDyndns
2014/07/09 23:04:10 5C16E0 r HDplusHD02 [internal] card detected
2014/07/09 23:04:10 5E3958 p CCcamRemote1 [cccam] proxy initialized, server Dyndns
2014/07/09 23:04:10 5DE198 r V14 [smartreader] Reader initialized (device=SRv2;Serial:XXXXXXXX, detect=cd, mhz=369, cardmhz=369)
2014/07/09 23:04:11 5DE198 r V14 [smartreader] card detected
2014/07/09 23:04:11 5C16E0 r HDplusHD02 [internal] ATR: 3F FF
2014/07/09 23:04:11 5C16E0 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/07/09 23:04:11 5C16E0 r HDplusHD02 [internal] TEST tempo mhz check = 500 mhz
2014/07/09 23:04:11 5C16E0 r HDplusHD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/07/09 23:04:11 5C16E0 r HDplusHD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/07/09 23:04:11 5C16E0 r HDplusHD02 [internal] Card responded ok for ifsd request of 160
2014/07/09 23:04:12 5C16E0 r HDplusHD02 [internal] detect native nagra card
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [internal] found card system nagra
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] ROM: D N A S P 1 8 0
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] REV: M e r 0 0 0
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] SER: ############
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] CAID: 1843
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] Prv.ID: 00 00 00 00
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] IRD ID: ############
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] active to: 2014/08/27 12:59
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] -----------------------------------------
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] |id |tier |valid from |valid to |
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] +----+--------+------------+------------+
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] |8011|0066 |2012/08/12 |2013/08/13 |
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] |8011|0BEA |2013/08/12 |2014/09/17 |
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] -----------------------------------------
2014/07/09 23:04:14 5C16E0 r HDplusHD02 [nagra] ready for requests
2014/07/09 23:04:20 5DE198 r V14 [smartreader] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/07/09 23:04:20 5DE198 r V14 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/07/09 23:04:20 5DE198 r V14 [smartreader] Calculated work ETU is 151.22 us reader mhz = 369
2014/07/09 23:04:20 5DE198 r V14 [smartreader] Effective reader settings mhz =369 F= 558 D= 1 N=0 T=14 inv=0 parity=NONE
2014/07/09 23:04:21 5DE198 r V14 [smartreader] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/07/09 23:04:22 5DE198 r V14 [smartreader] detect irdeto tunneled nagra card
2014/07/09 23:04:22 5DE198 r V14 [smartreader] no rsa key configured -> using irdeto mode
2014/07/09 23:04:22 5DE198 r V14 [smartreader] detect irdeto card
2014/07/09 23:04:25 5DE198 r V14 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/07/09 23:04:34 5DE198 r V14 [smartreader] card system not supported
2014/07/09 23:04:34 5DE198 r V14 [smartreader] Normal mode failed, reverting to Deprecated Mode
2014/07/09 23:04:44 5DE198 r V14 [smartreader] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/07/09 23:04:44 5DE198 r V14 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/07/09 23:04:44 5DE198 r V14 [smartreader] Calculated work ETU is 100.81 us reader mhz = 369
2014/07/09 23:04:44 5DE198 r V14 [smartreader] Effective reader settings mhz =369 F= 372 D= 1 N=0 T=14 inv=0 parity=NONE
2014/07/09 23:04:45 5DE198 r V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/07/09 23:04:46 5DE198 r V14 [smartreader] detect irdeto tunneled nagra card
2014/07/09 23:04:46 5DE198 r V14 [smartreader] no rsa key configured -> using irdeto mode
2014/07/09 23:04:46 5DE198 r V14 [smartreader] detect irdeto card
2014/07/09 23:04:46 5DE198 r V14 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/07/09 23:04:48 5DE198 r V14 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/07/09 23:04:52 5DE198 r V14 [smartreader] card system not supported
2014/07/09 23:04:52 5DE198 r V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/09 23:04:52 5DE198 r V14 [smartreader] card initializing error
2014/07/09 23:04:53 0 s init for all local cards done
2014/07/09 23:04:53 0 s anti cascading disabled
 
Zuletzt bearbeitet von einem Moderator:
AW: Bekomme V14 nicht zum laufen!!!

ich hoffe du weisst das deine V14 in wirklichkeit eine S02 ist
2014/07/09 23:04:25 5DE198 r V14 [smartreader] caid: 1702, acs: 3.84, country code: GER
Zum Vergrößern anklicken....
 
AW: Bekomme V14 nicht zum laufen!!!

Sorry falsche Karte reingesteckt

log
>> OSCam << cardserver started at Wed Jul 9 23:30:34 2014
-------------------------------------------------------------------------------
2014/07/09 23:30:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9780 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2014/07/09 23:30:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12047
2014/07/09 23:30:34 0 s services reloaded: 0 services freed, 20 services loaded, rejected 0
2014/07/09 23:30:34 0 s userdb reloaded: 21 accounts loaded, 0 expired, 0 disabled
2014/07/09 23:30:34 0 s signal handling initialized
2014/07/09 23:30:34 0 s 446 service-id's loaded in 71ms
2014/07/09 23:30:34 0 s 1000 provid's loaded
2014/07/09 23:30:34 0 s 22 lengths for caid guessing loaded
2014/07/09 23:30:34 0 s cccam: initialized (fd=5, port=XXXXX)
2014/07/09 23:30:34 0 s HDplusHD02 [internal] creating thread for device /dev/sci0
2014/07/09 23:30:35 5DE088 h webif: decompressed 151915 bytes back into 363072 bytes
2014/07/09 23:30:35 5DE088 h HTTP Server running. ip=0.0.0.0 port=XXXXX
2014/07/09 23:30:35 0 s V14 [smartreader] creating thread for device SRv2;Serial:XXXXXXXX
2014/07/09 23:30:35 0 s CCcamRemote1 [cccam] creating thread for device dyndns
2014/07/09 23:30:35 0 s waiting for local card init
2014/07/09 23:30:35 5C1648 r HDplusHD02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/07/09 23:30:35 5E3848 p dyndns
2014/07/09 23:30:35 5E3848 p CCcamRemote1 [cccam] connecting to dyndns
2014/07/09 23:30:35 5E1A18 r V14 [smartreader] Reader initialized (device=SRv2;Serial:XXXXXXXX, detect=cd, mhz=369, cardmhz=369)
2014/07/09 23:30:35 5E3848 p CCcamRemote1 [cccam] proxy initialized, server dyndns
2014/07/09 23:30:36 5C1648 r HDplusHD02 [internal] card detected
2014/07/09 23:30:36 5E1A18 r V14 [smartreader] card detected
2014/07/09 23:30:37 5C1648 r HDplusHD02 [internal] ATR: 3F FF
2014/07/09 23:30:37 5C1648 r HDplusHD02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/07/09 23:30:37 5C1648 r HDplusHD02 [internal] TEST tempo mhz check = 500 mhz
2014/07/09 23:30:37 5C1648 r HDplusHD02 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/07/09 23:30:37 5C1648 r HDplusHD02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/07/09 23:30:37 5C1648 r HDplusHD02 [internal] Card responded ok for ifsd request of 160
2014/07/09 23:30:38 5C1648 r HDplusHD02 [internal] detect native nagra card
2014/07/09 23:30:39 5C1648 r HDplusHD02 [internal] found card system nagra
2014/07/09 23:30:39 5C1648 r HDplusHD02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/07/09 23:30:39 5C1648 r HDplusHD02 [nagra] ROM: D N A S P 1 8 0
2014/07/09 23:30:39 5C1648 r HDplusHD02 [nagra] REV: M e r 0 0 0
2014/07/09 23:30:39 5C1648 r HDplusHD02 [nagra] SER: ############
2014/07/09 23:30:39 5C1648 r HDplusHD02 [nagra] CAID: 1843
2014/07/09 23:30:39 5C1648 r HDplusHD02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] Prv.ID: 00 00 00 00
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] IRD ID: ############
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] active to: 2014/08/27 12:59
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] -----------------------------------------
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] |id |tier |valid from |valid to |
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] +----+--------+------------+------------+
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] |8011|0066 |2012/08/12 |2013/08/13 |
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] |8011|0BEA |2013/08/12 |2014/09/17 |
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] -----------------------------------------
2014/07/09 23:30:40 5C1648 r HDplusHD02 [nagra] ready for requests
2014/07/09 23:30:41 5E1A18 r V14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00
2014/07/09 23:30:41 5E1A18 r V14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/07/09 23:30:41 5E1A18 r V14 [smartreader] Calculated work ETU is 6.30 us reader mhz = 369
2014/07/09 23:30:41 5E1A18 r V14 [smartreader] Effective reader settings mhz =369 F= 372 D= 16 N=2 T=0 inv=1 parity=ODD
2014/07/09 23:30:41 5E1A18 r V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/07/09 23:30:46 5E1A18 r V14 [smartreader] classD0 ins7401: failed - cmd list not read
2014/07/09 23:30:46 5E1A18 r V14 [smartreader] card system not supported
2014/07/09 23:30:46 5E1A18 r V14 [smartreader] Normal mode failed, reverting to Deprecated Mode
2014/07/09 23:30:51 5E1A18 r V14 [smartreader] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/07/09 23:30:51 5E1A18 r V14 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/07/09 23:30:51 5E1A18 r V14 [smartreader] Calculated work ETU is 100.81 us reader mhz = 369
2014/07/09 23:30:51 5E1A18 r V14 [smartreader] Effective reader settings mhz =369 F= 372 D= 1 N=2 T=0 inv=1 parity=ODD
2014/07/09 23:30:51 5E1A18 r V14 [smartreader] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/07/09 23:30:55 5E1A18 r V14 [smartreader] card system not supported
2014/07/09 23:30:55 5E1A18 r V14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/07/09 23:30:55 5E1A18 r V14 [smartreader] card initializing error
2014/07/09 23:30:56 0 s init for all local cards done
2014/07/09 23:30:56 0 s anti cascading disabled
 
AW: Bekomme V14 nicht zum laufen!!!

die oscam.server dazu?
 
AW: Bekomme V14 nicht zum laufen!!!

server

[reader]
label = HDplusHD02
protocol = internal
device = /dev/sci0
detect = CD
cardmhz = 2700
autospeed = 1
caid = 1843
rsakey = BFXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX5
boxkey = A7XXXXXXXXXXXXC
group = 1
emmcache = 1,1,2

[reader]
label = V14
protocol = smartreader
device = SRv2;Serial:XXXXXXXX
detect = CD
cardmhz = 357
caid = 098C
boxid = 12345678
ins7e11 = 15
group = 3
autospeed = 0
detect = cd
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-27,32,34,36-37,61-68,70-120,122,124-125,127,137-255
saveemm-u = 1
ndsversion = 2

[reader]
label = CCcamRemote1
protocol = cccam
device = dyndns
user = user
password = passw
caid = 1834,1722,09c7
cccreshare = 3
ccckeepalive = 1
group = 4
 
AW: Bekomme V14 nicht zum laufen!!!

Hallo. Ich versuche mal dein Problem zu verstehen. Deine V14 wird moch nicht erkannt. Sky HD erhälst über den share und wenn du auf deiner Box, also als local, sat1HD anschauen willst, wird die 1843 abgefragt anstatt der 09c7.
Für die V14 würde ich wie bereits vorgeschlagen, ins=15 rausnehmen, die mhz löschen und autospeed auf 1 setzen. Als local dürftes du eigentlich nichts sehen, weil du eigentlich nur dir group=3 drin hast und nur auf die V14 zugreifen könntest. Hast du noch ne dvb.api und evtl services drin? Ich würde beim dvbapi user au=1 setzen für die V14.
Du könntest aber erstmal die V14 in den internen reader stecken zum initialisieren. Wenn sie erkannt wird, kannst du schon mal die Emms loggen damit du deine Karte aktivieren kannst.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

M
DM8000 und V14 ?
Antworten
5
Aufrufe
272
telecomic
A
Aussetzer bei Oscam Client mit V23 Karte
2
Antworten
23
Aufrufe
989
DarkStarXxX
D
E
HD02 Dunkel und ich finde den Fehler in der Konfig nicht
Antworten
12
Aufrufe
435
telecomic
gelöst Habe Probleme meine HD+ HD05 in OSCam zum Laufen zu bekommen.
2
Antworten
19
Aufrufe
1K
Alex
gelöst no entitlements bei Kabel G09 Card
Antworten
10
Aufrufe
2K
dodo83
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…