Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

[biolose]

hallo habe mir einen test und probier igel aufgebaut bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam , bitte um hilfe--- logs und configs welche werden gebraucht gruß bio

 

[waves]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

oscam.conf
oscam.server
oscam.user

Log vom Start Oscam

und zur Sicherheit die C-Line vom Client

Zusätzlich noch die Info, ob internes CS, oder über I-net. Anbindung wäre auch ggf. interessant, also Lan, Wlan oder Dlan? (sowohl Server als auch Client)

 

[biolose]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

hallo oscam. conf

Spoiler

disablelog = 0
loghistorysize = 4096
serverip = 192.168.178.26
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
lb_mode = 2
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0
[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0
[cccam]
port = 14022
serverip = 192.168.178.26
nodeid = 051F4D0210EF13A6
version = 2.0.11
reshare = 0
reshare_mode = 0
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000
[webif]
httpport = 16022
serverip = 192.168.178.26
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl = /var/emu/oscam/picons
httphelplang = de
httpcert =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 0
httphideidleclients = 0
httphidetype =
httpshowpicons = 1
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
http_status_log = 0

oscam.Server

Spoiler

[reader]
label = camd3emu
description =
enable = 1
protocol = cs357x
device = 127.0.0.1,12345,0
key =
user = meinserver
password = meinserverpass
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
services =
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 0D05
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
[reader]
label = skys02-1
description = Sky SAT S02 Karte
enable = 1
protocol = mouse
device = /dev/Skys02-1
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 1702
atr =
boxid =
boxkey = 1122334455667788
rsakey =
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1702:93
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 1000
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
[reader]
label = skys02-2
description = Sky SAT S02 Karte
enable = 1
protocol = mouse
device = /dev/Skys02-2
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 1702
atr =
boxid =
boxkey = 1122334455667788
rsakey =
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1702:93
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 1000
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
[reader]
label = hd01
description = Astra HD+ 01
enable = 1
protocol = mouse
device = /dev/HD+
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 1830
atr =
boxid =
boxkey = 0000000
rsakey = 0000000
ins7e =
ins7e11 =
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1830:92
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 368
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 3
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
[reader]
label = KDHD
description = KDG09
enable = 1
protocol = mouse
device = /dev/G09
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
caid = 09C7
atr =
boxid = 12345678
boxkey =
rsakey =
ins7e =
ins7e11 = 15
ins2e06 =
fix9993 = 0
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 357
ident = 09C7:000000
chid =
class =
aeskeys =
group = 4
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 2
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

oscam.user

Spoiler

[account]
disabled = 0
user = user2
pwd = giga2
description =
hostname =
caid = 1722,1834,09C7
uniq = 0
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
umaxidle = 0
keepalive = 0
emmreassembly = 2
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel = 1833.FFFF:1722,1834.FFFF:1702
group = 1,2,3,4
services =
ident =
chid =
class =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_drop_csp = 0
cacheex_allow_request = 0
no_wait_time = 0
cccmaxhops = 10
cccreshare = -1
cccignorereshare = -1
cccstealth = -1
fakedelay = 0
numusers = 0
penalty = 0
lb_nbest_readers = 0
lb_nfb_readers = 0
lb_nbest_percaid =

Spoiler

C-Line vom Client c:192.168.178.26 14022 user2 giga2

log

Spoiler

2014/05/17 10:52:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9707 (x86_64-linux-gnu)
2014/05/17 10:52:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8806
2014/05/17 10:52:34 0 s userdb reloaded: 3 accounts loaded, 0 expired, 2 disabled
2014/05/17 10:52:34 0 s signal handling initialized
2014/05/17 10:52:34 0 s cccam: initialized (fd=5, port=14022, ip=192.168.178.26)
2014/05/17 10:52:34 0 s camd3emu [cs357x] creating thread for device 127.0.0.1
2014/05/17 10:52:34 0 s skys02-1 [mouse] creating thread for device /dev/Skys02-1
2014/05/17 10:52:34 0 s skys02-2 [mouse] creating thread for device /dev/Skys02-2
2014/05/17 10:52:34 0 s hd01 [mouse] creating thread for device /dev/HD+
2014/05/17 10:52:34 0 s KDHD [mouse] creating thread for device /dev/G09
2014/05/17 10:52:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/17 10:52:34 0 s waiting for local card init
2014/05/17 10:52:34 1ADAAF0 p cs357x proxy 127.0.0.1:12345
2014/05/17 10:52:34 1ADAAF0 p camd3emu [cs357x] proxy initialized, server 127.0.0.1:12345
2014/05/17 10:52:34 1AF1DB0 r hd01 [mouse] ERROR: Opening device /dev/HD+ (errno=2 No such file or directory)
2014/05/17 10:52:34 1AF1DB0 r hd01 [mouse] Cannot open device: /dev/HD+
2014/05/17 10:52:34 1AF3C10 r KDHD [mouse] ERROR: Opening device /dev/G09 (errno=2 No such file or directory)
2014/05/17 10:52:34 1AF3C10 r KDHD [mouse] Cannot open device: /dev/G09
2014/05/17 10:52:34 1AEFF50 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 10:52:34 1AEFF50 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 10:52:34 1AF5A70 h webif: decompressed 151461 bytes back into 357536 bytes
2014/05/17 10:52:34 1AF5A70 h HTTP Server running. ip=192.168.178.26 port=16022
2014/05/17 10:52:34 1AEE0F0 r skys02-1 [mouse] Reader initialized (device=/dev/Skys02-1, detect=cd, mhz=1000, cardmhz=600)
2014/05/17 10:52:35 1AEE0F0 r skys02-1 [mouse] card detected
2014/05/17 10:52:37 1AEE0F0 r skys02-1 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/05/17 10:52:37 1AEE0F0 r skys02-1 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/05/17 10:52:37 1AEE0F0 r skys02-1 [mouse] Calculated work ETU is 55.80 us reader mhz = 1000
2014/05/17 10:52:37 1AEE0F0 r skys02-1 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 10.00 MHz (specified in reader->mhz)
2014/05/17 10:52:38 1AEE0F0 r skys02-1 [mouse] detect irdeto tunneled nagra card
2014/05/17 10:52:38 1AEE0F0 r skys02-1 [mouse] no rsa key configured -> using irdeto mode
2014/05/17 10:52:38 1AEE0F0 r skys02-1 [mouse] detect irdeto card
2014/05/17 10:52:38 1AEE0F0 r skys02-1 [mouse] caid: 1702, acs: 3.84, country code: GER
2014/05/17 10:52:38 1AEE0F0 r skys02-1 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/05/17 10:52:41 1AEE0F0 r skys02-1 [mouse] active providers: 2 (000000,000000)
2014/05/17 10:52:41 1AEE0F0 r skys02-1 [mouse] found card system irdeto
2014/05/17 10:52:41 1AEE0F0 r skys02-1 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/17 10:52:41 1AEE0F0 r skys02-1 [irdeto] entitlements for provider: 2, id: 000000
2014/05/17 10:52:41 1AEE0F0 r skys02-1 [irdeto] chid: 0107, date: 2008/01/19 - 2008/01/21

ist nur eine karte gesteckt gruß bio

 

[waves]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

in der Oscam.user die falschen caid's eingetragen.
1722, 1834 sind die CAID's für eine D02 also Kabel.
1702, 1833 sind für die S02.

Betatunnel auch falsch, so muß er für Sat aussehen:

Betatunnel = 1833.FFFF:1702

Mehr seh ich nicht, da es mir zu unübersichtlich ist......mal httpsavefullcfg = 1 in der Oscam.conf auf 0 setzen, neustarten, dann in jeder Conf über das WebIf mal eine kleine Änderung machen, speichern, Änderung wieder Rückgängig, wieder speichern und dann Oscam neustarten, danach sollten die Configs deutlich kleiner und übersichtlicher sein.....und beim posten SPOILER benutzen.....

 

[biolose]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

hallo SPOILER gesetzt,,, mit diesen conf funst es auf meinem lauf igel alles bestens ,,, von dort übernommen wenn ich mich auf den test igel auf lauf igel hin und her (Total Commander 64- C-Line geendert ) bewege bekomme ich nur den den lauf igel bild ,,

von der giga kann ich den Server port sehen 14022 gruß bio

 

[waves]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

Wie eben schon erwähnt, bei den Configs wird sich keiner durchwühlen, da viel zu viel drin.
Befolge mal meine Anleitung um die Configs zu verkleinern, danach sehen wir weiter.

 

[biolose]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

hallo kann sie nicht kleiner machen,, denke das Problem ist im Netzwerk ???

 

[dodo83]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

[COLOR=#333333]httpsavefullcfg = 0

oscam neu starten
evnetuell dazu im WebIF aus Reader/User bearbeiten gehen und unten speichern
jetzt werden die Configs unter Files ohne die Default werte angezeigt [/COLOR]

 

[biolose]

habe es berarbeitet hoffe es ist jetzt besser oscam.conf

Spoiler

OSCam Konfiguration IPC - oscam.conf
[global]
loghistorysize = 4096
serverip = 0.0.0.0
logfile = /var/log/ipc/OScam.log
disableuserfile = 1
disablemail = 1
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
readerrestartseconds = 5
block_same_ip = 1
block_same_name = 1
lb_mode = 2
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_auto_betatunnel = 1
lb_auto_betatunnel_prefer_beta= 50
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300


[cccam]
port = 14022
serverip = 0.0.0.0
nodeid = 051F4D0210EF13A6
version = 2.1.1
updateinterval = 240
keepconnected = 1
recv_timeout = 2000
[webif]
httpport = 16022
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httptpl = /var/emu/oscam/picons
httphelplang = de
httprefresh = 15
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
aulow = 30
hideclient_to = 25

user

[account]

Spoiler

disabled =
user = user2
pwd = giga2
emmreassembly = 2
betatunnel = 1833.FFFF:1722,1834.FFFF:1702
group = 1,2,3,4
cccmaxhops = 10
cccreshare = -1
cccignorereshare = -1
cccstealth = -1

oscam.server
[Reader]

Spoiler

# OSCam Konfiguration IPC - oscam.server
[reader]
label = skys02-1
description = Sky SAT S02 Karte
enable = 1
protocol = mouse
device = /dev/Skys02-1
pincode = none
caid = 1702
boxkey = 1122334455667788
ecmwhitelist = 1702:93
detect = cd
mhz = 1000
cardmhz = 600
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
cccreshare = -1
cooldown = 0,0

gruß bio

hallo der log noch

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat May 17 17:03:02 2014
-------------------------------------------------------------------------------
2014/05/17 17:03:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9730 (x86_64-linux-gnu)
2014/05/17 17:03:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5683
2014/05/17 17:03:02 0 s userdb reloaded: 1 accounts loaded, 0 expired, 1 disabled
2014/05/17 17:03:02 0 s signal handling initialized
2014/05/17 17:03:02 0 s cccam: initialized (fd=5, port=14022)
2014/05/17 17:03:02 0 s skys02-1 [mouse] creating thread for device /dev/Skys02-1
2014/05/17 17:03:02 0 s skys02-2 [mouse] creating thread for device /dev/Skys02-2
2014/05/17 17:03:02 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/17 17:03:02 0 s waiting for local card init
2014/05/17 17:03:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 17:03:02 2279BB0 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 17:03:02 227BB70 h webif: decompressed 151915 bytes back into 363072 bytes
2014/05/17 17:03:02 227BB70 h HTTP Server running. ip=0.0.0.0 port=16022
2014/05/17 17:03:02 2271B50 r skys02-1 [mouse] Reader initialized (device=/dev/Skys02-1, detect=cd, mhz=1000, cardmhz=600)
2014/05/17 17:03:03 2271B50 r skys02-1 [mouse] card detected
2014/05/17 17:03:04 2271B50 r skys02-1 [mouse] ATR:xxxxxxxxx
2014/05/17 17:03:04 2271B50 r skys02-1 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/05/17 17:03:04 2271B50 r skys02-1 [mouse] Calculated work ETU is 55.80 us reader mhz = 1000
2014/05/17 17:03:04 2271B50 r skys02-1 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 10.00 MHz (specified in reader->mhz)
2014/05/17 17:03:05 2271B50 r skys02-1 [mouse] detect irdeto tunneled nagra card
2014/05/17 17:03:05 2271B50 r skys02-1 [mouse] no rsa key configured -> using irdeto mode
2014/05/17 17:03:05 2271B50 r skys02-1 [mouse] detect irdeto card
2014/05/17 17:03:05 2271B50 r skys02-1 [mouse] caid: 1702, acs: 3.84, country code: GER
2014/05/17 17:03:05 2271B50 r skys02-1 [mouse] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/05/17 17:03:08 2271B50 r skys02-1 [mouse] active providers: 2 (000000,000000)
2014/05/17 17:03:08 2271B50 r skys02-1 [mouse] found card system irdeto
2014/05/17 17:03:08 2271B50 r skys02-1 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/17 17:03:08 2271B50 r skys02-1 [irdeto] entitlements for provider: 2, id: 000000
2014/05/17 17:03:08 2271B50 r skys02-1 [irdeto] chid: 0107, date: 2008/01/19 - 2008/01/21
2014/05/17 17:03:08 2271B50 r skys02-1 [irdeto] chid: 0108, date: 2008/01/19 - 2008/01/21
2014/05/17 17:03:08 2271B50 r skys02-1 [irdeto] chid: 7D2B, date: 2008/01/19 - 2008/01/21

gruß bio

 

[dodo83]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

was kommt danch im log wenn die karte eingelesen wird?
probiert sich der Client zu verbinden?
oder ist er CONNECTED und es wird nur nicht "hell"

 

[waves]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

Übrigens ist der Betatunnel immer noch falsch.^^
ansonsten erstmal das Logfile das @dodo schon erfragt hat.

 

[biolose]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

jetzt kommt das nach

Spoiler

2014/05/17 17:04:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 17:04:02 2279BB0 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 17:05:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 17:05:02 2279BB0 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 17:06:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 17:06:02 2279BB0 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 17:07:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 17:07:02 2279BB0 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 17:08:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)
2014/05/17 17:08:02 2279BB0 r skys02-2 [mouse] Cannot open device: /dev/Skys02-2
2014/05/17 17:09:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)

 

[dodo83]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

hast du den Reader für die S02 doppelt mit anderer Device?
den mit

[COLOR=#333333]/dev/Skys02-2[/COLOR]

aus machen
oscam neu starten
log vom start bis zur sender abfrage posten

 

[bombadil]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

Hi,

Schreibfehler in den UDEV Regeln?

device = /dev/Skys02-1

2014/05/17 17:09:02 2279BB0 r skys02-2 [mouse] ERROR: Opening device /dev/Skys02-2 (errno=2 No such file or directory)

Grüße
Bombadil

 

[dodo83]

AW: Bekomme keine Verbindung zwischen igel mit oscam und gigablue cccam

laut dem ersten log hat er zwei

2014/05/17 17:03:02 0 s skys02-1 [mouse] creating thread for device /dev/Skys02-1
2014/05/17 17:03:02 0 s skys02-2 [mouse] creating thread for device /dev/Skys02-2