Codierung Audi Audi s3 8v 2017 side assist

[hansik88]

Automarke / Hersteller

Audi

Modell

S3

Interne Modellbezeichnung

8v

Erstzulassung (MM/JJJJ)

02/2018

Hallo, mein Bruder wolltet side assis nachrüsten. Hat Teile gekauft alles angeschlossen und codiert. Jetzt hat er folgende fehler:

Address 3C: Lane Change (J769) Labels:| 3Q0-907-566.clb
Part No SW: 3Q0 907 566 D HW: 3Q0 907 566
Component: MRR1Rear H16 X400
Revision: -------- Dataset Number: 8V0909535F 0002
Coding: 04C002
Shop #: WSC 06319 790 00021
ASAM Dataset: EV_RearRadarS1BoschVW48X 001002
ROD: EV_RearRadarS1BoschVW48X_AU37.rod
VCID: 392F2C3589D3DCB2585-806C

6 Faults Found:
730113 - Warning Lamp for Lane Change Assistant
C11F3 11 [00001001] - Short to Ground
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 68
Mileage: 60065 km
Date: 2024.09.21
Time: 19:44:20

Control Module temperature: 54 °C
Voltage terminal 30: Measuring value not available
Vehicle speed: 0.00 km/h
Terminal 15 status: Measuring value not available
Voltage terminal 15: 13.80 V

729349 - Control Module for Lane Change Assistance
C1114 54 [00001001] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 68
Mileage: 60065 km
Date: 2024.09.21
Time: 19:44:20

Control Module temperature: 54 °C
Voltage terminal 30: Measuring value not available
Vehicle speed: 0.00 km/h
Terminal 15 status: Measuring value not available
Voltage terminal 15: 13.90 V

729605 - Control Module 2 for Lane Change Assistance
C1115 54 [00001001] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 68
Mileage: 60065 km
Date: 2024.09.21
Time: 19:44:20

Control Module temperature: 54 °C
Voltage terminal 30: Measuring value not available
Vehicle speed: 0.00 km/h
Terminal 15 status: Measuring value not available
Voltage terminal 15: 13.90 V

1192264 - Databus
U1123 00 [00001000] - Received Error Message
[Tip-TNF 198104]
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 22
Reset counter: 122
Mileage: 60065 km
Date: 2024.09.21
Time: 20:46:02

Control Module temperature: 28 °C
Voltage terminal 30: Measuring value not available
Vehicle speed: 655.17 km/h
Terminal 15 status: Measuring value not available
Voltage terminal 15: 14.10 V

267010 - Databus
U1123 00 [00001001] - Received Error Message
[Tip-TNF 225007]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 6
Fault Frequency: 1
Reset counter: 68
Mileage: 60065 km
Date: 2024.09.21
Time: 19:44:20

Control Module temperature: 54 °C
Voltage terminal 30: Measuring value not available
Vehicle speed: 0.00 km/h
Terminal 15 status: Measuring value not available
Voltage terminal 15: 13.80 V

267008 - Control module
B2001 00 [00001001] - Incorrect software version
[Tip-TNF 195273]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 68
Mileage: 60065 km
Date: 2024.09.21
Time: 19:44:20

Control Module temperature: 54 °C
Voltage terminal 30: Measuring value not available
Vehicle speed: 0.00 km/h
Terminal 15 status: Measuring value not available
Voltage terminal 15: 13.80 V


Address CF: Lane Chge Asst 2 (J770) Labels:. 3Q0-907-566.clb
Part No SW: 3Q0 907 590 E HW: 3Q0 907 590
Component: MRR1Rear H20 0510
Revision: --------
Coding: 04C002
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_RearRadarS2BoschVW48X 001007
ROD: EV_RearRadarS2BoschVW48X_AU37.rod
VCID: 372B2A0DBFC7CAC2AE1-8062

1 Fault Found:
267008 - Control module
B2001 00 [00001001] - Incorrect software version
[Tip-TNF 195273]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Priority: 4
Fault Frequency: 1
Reset counter: 68
Mileage: 60065 km
Date: 2024.09.21
Time: 19:44:19

Control Module temperature: 52 °C
Voltage terminal 30: Measuring value not available

Jetzt habe ich Frage, mussen die beiden teilen selber software haben?
TEIL1:
Part No SW: 3Q0 907 590 E HW: 3Q0 907 590
Component: MRR1Rear H20 0510
TEIL 2:
Part No SW: 3Q0 907 566 D HW: 3Q0 907 566
Component: MRR1Rear H16 X400
Wenn ja, darf ich 3Q0 907 566 D mit

Sie müssen registriert sein, um Links zu sehen.

file
durch odis flashen und funktioniert alles? Oder danke ich flash?

 

[Hobo2k]

Also die Hardware ist ja schon unterschiedlich: H15 vs H20

Also es ist nen Verkabelungsfehler da, und dann muss die FW passend geflashed werden, wenn es überhaupt geht...

 

[hansik88]

Ich bin leider kein expert eher newbie. Kannst du mir erklaren wovon kann man merken dass da Verkablumgsfehler da ist?
Meinst du den fehler"730113 - Warning Lamp for Lane Change Assistant
C11F3 11 [00001001] - Short to Ground" ?

 

[Hobo2k]

Ja genau
Kurzschluss nach Masse