Problema Attivazione Mediaset Premium

[Lucadp]

Ho provato con CAID 1804 e 1805 (la carta del mio abbonamento è grigia e senza scadenza) ma è come se non venisse proprio letta correttamente tant'è che nel log di oscam non mi da il CAID ma dice "card system not supported".
La RSA trovata l'ho messa sia con spazi che senza ma non è cambiato niente, spero sia giusta! Diritti inviati tre volte ma nulla da fare...
Allego parte del log e configurazioni
log:

Spoiler

2014/11/18 02:42:08 4DDA68 r PREMIUM [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
2014/11/18 02:42:09 4DDA68 r PREMIUM [internal] card detected
014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TB1: 00
2014/11/18 02:42:14 4DC148 r SKY_ITA [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TC1: FF
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Protocol T1: Standard 2 ETU guardtime is lowered to 1 ETU
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TD1 91
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Fetching global interface characters for protocol T1:
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TA2: 81
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Switching between negotiable mode and specific mode is not possible
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Transmission parameters implicitly defined in the interface characters.
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Protocol T = 1 is to be used!
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TD2 71
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Fetching global interface characters for protocol T1:
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TA3: FE
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Maximum information field length this card can receive is 254 bytes (IFSC)
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TB3: 47
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Protocol T1: Character waiting time is 7(CWI)
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Protocol T1: Block waiting time is 4 (BWI)
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TC3: 00
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Protocol T1: LRC is used to compute the error detection code
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Total ATR Length including 15 historical bytes should be 26
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Total protocols in this ATR is 2
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35 12
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TA1=95 TB1=00 TC1=FF TD1=91 (T1)
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TA2=81 TD2=71 (T1)
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] TA3=FE TB3=47 TC3=00 no TD3 means T0
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] 2 protocol types detected. Historical bytes: 4E 43 4D 45 44 36 30 31 20 52 65 76 4D 30 35
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Specific mode: T1, F=512, D=16, N=255
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Calculated work ETU is 6.40 us reader mhz = 500
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Protocol: T=1: IFSC=251, CWT=139 etu, BWT=178571 etu, BGT=22 etu, EDC=LRC, N=255
2014/11/18 02:42:14 4DDA68 r PREMIUM [internal] Setting timings: reader timeout=178571 ETU, block_delay=22 ETU, char_delay=11 ETU
2014/11/18 02:42:15 4DC148 r SKY_ITA [internal] passed history check
2014/11/18 02:42:19 4DDA68 r PREMIUM [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/11/18 02:42:19 4DDA68 r PREMIUM [internal] Card responded ok for ifsd request of 251
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] card system not supported
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Normal mode failed, reverting to Deprecated Mode
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] ATR historicalbytes should be: 15
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Fetching global interface characters for protocol T0
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TA1: 95
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Advertised max cardfrequency is 5.00 (Fmax), frequency divider is 512 (Fi)
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Bitrate adjustment is 16 (D)
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Work ETU = 6.40 us assuming card runs at 5.00 Mhz
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Initial ETU = 74.40 us
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TB1: 00
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TC1: FF
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Protocol T1: Standard 2 ETU guardtime is lowered to 1 ETU
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TD1 91
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Fetching global interface characters for protocol T1:
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TA2: 81
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Switching between negotiable mode and specific mode is not possible
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Transmission parameters implicitly defined in the interface characters.
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Protocol T = 1 is to be used!
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TD2 71
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Fetching global interface characters for protocol T1:
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TA3: FE
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Maximum information field length this card can receive is 254 bytes (IFSC)
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TB3: 47
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Protocol T1: Character waiting time is 7(CWI)
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Protocol T1: Block waiting time is 4 (BWI)
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] TC3: 00
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Protocol T1: LRC is used to compute the error detection code
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Total ATR Length including 15 historical bytes should be 26
2014/11/18 02:42:20 4DDA68 r PREMIUM [internal] Total protocols in this ATR is 2
****
2014/11/18 02:49:42 4DDB70 r PREMIUM [internal] card system not supported
2014/11/18 02:49:42 4DDB70 r PREMIUM [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/18 02:49:42 4DDB70 r PREMIUM [internal] card initializing error
2014/11/18 02:49:43 4DDB70 r PREMIUM [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0

oscam reader:

Spoiler

[reader]
label = SKY_ITA
......

[reader]
label = PREMIUM
enable = 1
protocol = internal
device = /dev/sci1
detect = cd
cardmhz = 2700
mhz = -1
caid = 1805
ident = 1805:000000,008D11
#services =
group = 2
emmcache = 1,1,2
nagra_read = 2
rsakey = A92**************64B5
ecmwhitelist = 91
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
saveemm-unknown = 1
cccversion = 2.2.1
cccreshare = 0

[reader]
label = CLINE
......

oscam user

Spoiler

[account]
user = dvbapi
uniq = 1
au = SKY_ITA,PREMIUM
group = 1,2,3
cccreshare = 0

[account]
user = amico
.....

cosa posso tentare ancora? Uso Oscam 1.20-unstable_svn build r9164

 

[agnagna]

AW: Attivazione Mediaset Premium

2014/11/18 02:49:42 4DDB70 r PREMIUM [internal] card system not supported

Prova un'altra versione di oscam, alcune non supportano NAGRA...

 

[Lucadp]

Sai a quale mi riferisco, è un bel casino se non supporta nagra

 

[Lucadp]

Re: AW: Attivazione Mediaset Premium

E' proprio la mia versione di Oscam che non va col Nagra!
Ho stoppato la versione che uso abitualmente e configurato uno script per lanciare l'ultima versione (1004): riconosce la carta (CAID 1805) e così ho fatto rimandare i diritti da Premium (infatti ho loggato anche gli emm, ma avevo lasciato tutto aperto) però benchè nel reader vedo che ha scritto 3 Unique, 4 shared e 57 global continuo a non avere visione

 

[Lucadp]

Rimessa la carta dopo l'attivazione ed ho visione con oscam (ECM time 240/243, va bene?)