Anleitung: Blocken von EMM-bylen über Modbox

[bevatron]

#
# The modbox file uses the conventional INI format. The structure is as follows:
#
#  [section1]
#  setting1=value1
#  setting2=value2
#
#  [section2]
#  setting1=value3
#

#
# The section identifies the SmartCard, therefore consisting of the following
# parameters:
#
#  caid
#   The 4 hexadecimal digits long CAID specifying the SmartCard/CAS in use.
#
#  prov
#   The 4/6 hexadecimal digits long ident of the provider that the SmartCard is
#   supposed to descramble. In case of 4 digit idents, two 0 digits are appended.
#
[caid:0123:prov:012345]

#
# Settings
#
# The possible settings depend on the SmartCard in use. For each parameter,
# the support SmartCards are specified.
#

#
# rsa_key
#  RSA key for NAGRA and Conax or so-called camdata for Irdeto SmartCards.
#  An RSA key typically consists of 128 hexadecimal digits.
#
rsa_key=00000000111111112222222233333333444444445555555566666666777777778888888899999999AAAAAAAABBBBBBBBCCCCCCCCDDDDDDDDEEEEEEEEFFFFFFFF

#
# box_key
#  Either the so-called Box key for NAGRA or camkey for Irdeto SmartCards
#  consisting of 16 hexadecimal digits,
#  or the so-called Box ID for NDS VideoGuard and Tongfang SmartCards
#  consisting of 8 hexadecimal digits.
#
box_key=0123456789ABCDEF

#
# pincode
#  PIN code consisting of 4 decimal digits for SmartCard controlled parental
#  control. Supported SmartCards are ViACCESS, CryptoWorks and Conax.
#
pincode=1234

#
# blockemm-bylen
#  Blocks EMMs with the specified size ranges in order to try to prevent SmartCard
#  pairing. NDS VideoGuard SmartCards are supported (e.g. Sky DE V13 / V14).
#
#  If no upper bound is specified like in the below example, the upper bound is
#  set to infinity, meaning that all EMMs with sizes ranging from lower bound
#  to infinity are blocked.
#
#  Values are provided in decimal notation.
#
blockemm-bylen=1-29,31-35,37-47,50,52-53,55-


#
# Example entries
#
# It is of course possible to specify multiple entries/sections for multiple
# SmartCards. Entries do not have to contain all of the above settings.
# Following are some typical user scenarios.
#

# RSA and Box keys for provider 012345 with CAID 0123.
[caid:0123:prov:012345]
rsa_key=00000000111111112222222233333333444444445555555566666666777777778888888899999999AAAAAAAABBBBBBBBCCCCCCCCDDDDDDDDEEEEEEEEFFFFFFFF
box_key=0123456789ABCDEF

# Box keys and pin code for provider 012300 with CAID 3210.
[caid:3210:prov:012300]
pincode=1234

# Block EMMs with specified sizes for Sky V13 (CAID 09C4).
[caid:09C4:prov:000000]
blockemm-bylen=1-29,31-35,37-47,50,52-53,55-

# Block EMMs with specified sizes for Sky V14 (CAID 098C).
[caid:098C:prov:000000]
blockemm-bylen=1-38,40,42-44,65-124,126-127,131,139-255

Also einfach eine Textdatei erstellen, Die Dateiendung in .mbx umbenennen(.mbx= modbox File) und die benötigten Daten eintragen
und anschliessend selbige über die Loaderfunktion RSA Box keys Update einspielen.

Du musst angemeldet sein, um Bilder zu sehen.

Zur besseren Verständnis, nach dem obigen Beispiel, müsste die erstellte Texdatei für die V13 und die V14 wie unten folgend aussehen.
Dies ist natürlich jederzeit anpassbar für alle anderen Karten sowie einzelnd.

[caid:09C4:prov:000000]
blockemm-bylen=1-29,31-35,37-47,50,52-53,55-

[caid:098C:prov:000000]
blockemm-bylen=1-38,40,42-44,65-124,126-127,131,139-255

 

[Pandawurst]

AW: Anleitung: Blocken von EMM-bylen über Modbox

Weiß jemand wie viele Einträge in blockemm-bylen= gestattet sind und die dort einzutragenen Werte richten sich doch nach OScam und nicht CCcam, richtig?

 

[Nappy08]

AW: Anleitung: Blocken von EMM-bylen über Modbox

Ja, Oscam.