Risolto Aiuto configurazione Oscam Pura - Raspberry - Smargo

[elcoro]

AW: Aiuto configurazione Oscam Pura - Raspberry - Smargo

a prescindere dal setelite ma la card e attiva?

sul rasp usi un hub?
e per finire il dmesg cosa ti risponde?

ciao e buona serata


a dimenticavo ma che oscam stai usando, per il raspberry per solo linux versione?

 

[agnagna]

AW: Aiuto configurazione Oscam Pura - Raspberry - Smargo

dmesg:

Spoiler

[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.25+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #622 PREEMPT Fri Jan 3 18:41:00 GMT 2014
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] cma: CMA: reserved 16 MiB at 1b000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 114688
[ 0.000000] free_area_init_node: node 0, pgdat c05cfd6c, node_mem_map c067d000
[ 0.000000] Normal zone: 896 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 114688 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113792
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=984 bcm2708.boardrev=0xe bcm2708.serial=0x181d6775 smsc95xx.macaddr=B8:27:EB:1D:67:75 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 448MB = 448MB total
[ 0.000000] Memory: 431652k/431652k available, 27100k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff000000 ( 552 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc05727b4 (5546 kB)
[ 0.000000] .init : 0xc0573000 - 0xc0597424 ( 146 kB)
[ 0.000000] .data : 0xc0598000 - 0xc05d0870 ( 227 kB)
[ 0.000000] .bss : 0xc05d0870 - 0xc067c3e0 ( 687 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:330
[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.001181] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.001247] pid_max: default: 32768 minimum: 301
[ 0.001717] Mount-cache hash table entries: 512
[ 0.002523] Initializing cgroup subsys memory
[ 0.002633] Initializing cgroup subsys devices
[ 0.002674] Initializing cgroup subsys freezer
[ 0.002709] Initializing cgroup subsys blkio
[ 0.002870] CPU: Testing write buffer coherency: ok
[ 0.003350] Setting up static identity map for 0xc0406048 - 0xc04060a4
[ 0.005183] devtmpfs: initialized
[ 0.019600] NET: Registered protocol family 16
[ 0.025549] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.026670] bcm2708.uart_clock = 0
[ 0.028402] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.028459] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.028498] mailbox: Broadcom VideoCore Mailbox driver
[ 0.028599] bcm2708_vcio: mailbox at f200b880
[ 0.028709] bcm_power: Broadcom power driver
[ 0.028751] bcm_power_open() -> 0
[ 0.028778] bcm_power_request(0, 8)
[ 0.529501] bcm_mailbox_read -> 00000080, 0
[ 0.529546] bcm_power_request -> 0
[ 0.529775] Serial: AMBA PL011 UART driver
[ 0.529943] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[ 0.872168] console [ttyAMA0] enabled
[ 0.898110] bio: create slab <bio-0> at 0
[ 0.903443] SCSI subsystem initialized
[ 0.907420] usbcore: registered new interface driver usbfs
[ 0.913143] usbcore: registered new interface driver hub
[ 0.918721] usbcore: registered new device driver usb
[ 0.925312] Switching to clocksource stc
[ 0.929658] FS-Cache: Loaded
[ 0.932832] CacheFiles: Loaded
[ 0.948630] NET: Registered protocol family 2
[ 0.954047] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.961320] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.967846] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.974323] TCP: reno registered
[ 0.977582] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.983491] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.990236] NET: Registered protocol family 1
[ 0.995165] RPC: Registered named UNIX socket transport module.
[ 1.001228] RPC: Registered udp transport module.
[ 1.005957] RPC: Registered tcp transport module.
[ 1.010708] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.018055] bcm2708_dma: DMA manager at f2007000
[ 1.022877] bcm2708_gpio: bcm2708_gpio_probe c05a5e50
[ 1.028331] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 1.037715] audit: initializing netlink socket (disabled)
[ 1.043393] type=2000 audit(0.890:1): initialized
[ 1.205222] VFS: Disk quotas dquot_6.5.2
[ 1.209619] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.218470] FS-Cache: Netfs 'nfs' registered for caching
[ 1.225207] NFS: Registering the id_resolver key type
[ 1.230508] Key type id_resolver registered
[ 1.234722] Key type id_legacy registered
[ 1.239547] msgmni has been set to 875
[ 1.245417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.253265] io scheduler noop registered
[ 1.257227] io scheduler deadline registered (default)
[ 1.262821] io scheduler cfq registered
[ 1.266964] bcm2708_fb_debugfs_init: could not create debugfs entry
[ 1.274549] BCM2708FB: allocated DMA memory 5b400000
[ 1.279705] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 1.317725] Console: switching to colour frame buffer device 240x61
[ 1.339029] uart-pl011 dev:f1: no DMA platform data
[ 1.344128] kgdb: Registered I/O driver kgdboc.
[ 1.349502] vc-cma: Videocore CMA driver
[ 1.353525] vc-cma: vc_cma_base = 0x00000000
[ 1.358313] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 1.363867] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 1.379036] brd: module loaded
[ 1.387694] loop: module loaded
[ 1.391338] vchiq: vchiq_init_state: slot_zero = 0xdb000000, is_master = 0
[ 1.399453] Loading iSCSI transport class v2.0-870.
[ 1.405602] usbcore: registered new interface driver smsc95xx
[ 1.411821] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.617876] Core Release: 2.80a
[ 1.621205] Setting default values for core params
[ 1.626128] Finished setting default values for core params
[ 1.831904] Using Buffer DMA mode
[ 1.835309] Periodic Transfer Interrupt Enhancement - disabled
[ 1.841276] Multiprocessor Interrupt Enhancement - disabled
[ 1.846955] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.851424] Dedicated Tx FIFOs mode
[ 1.855586] dwc_otg: Microframe scheduler enabled
[ 1.855834] dwc_otg bcm2708_usb: DWC OTG Controller
[ 1.860950] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 1.868357] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 1.874012] Init: Port Power? op_state=1
[ 1.878019] Init: Power Port (0)
[ 1.881549] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.892732] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.904274] usb usb1: Product: DWC OTG Controller
[ 1.913255] usb usb1: Manufacturer: Linux 3.10.25+ dwc_otg_hcd
[ 1.923358] usb usb1: SerialNumber: bcm2708_usb
[ 1.933000] hub 1-0:1.0: USB hub found
[ 1.941094] hub 1-0:1.0: 1 port detected
[ 1.949795] dwc_otg: FIQ enabled
[ 1.949817] dwc_otg: NAK holdoff enabled
[ 1.949830] dwc_otg: FIQ split fix enabled
[ 1.949851] Module dwc_common_port init
[ 1.950307] usbcore: registered new interface driver usb-storage
[ 1.961117] mousedev: PS/2 mouse device common for all mice
[ 1.971786] bcm2835-cpufreq: min=700000 max=800000 cur=700000
[ 1.982156] bcm2835-cpufreq: switching to governor powersave
[ 1.992156] bcm2835-cpufreq: switching to governor powersave
[ 2.002064] cpuidle: using governor ladder
[ 2.010320] cpuidle: using governor menu
[ 2.018411] sdhci: Secure Digital Host Controller Interface driver
[ 2.028724] sdhci: Copyright(c) Pierre Ossman
[ 2.037313] sdhci: Enable low-latency mode
[ 2.089351] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[ 2.101662] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[ 2.111939] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.123996] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.141774] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.151675] Indeed it is in host mode hprt0 = 00021501
[ 2.163361] usbcore: registered new interface driver usbhid
[ 2.180054] usbhid: USB HID core driver
[ 2.203033] TCP: cubic registered
[ 2.219322] Initializing XFRM netlink socket
[ 2.227776] NET: Registered protocol family 17
[ 2.259530] Key type dns_resolver registered
[ 2.289878] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 2.320340] registered taskstats version 1
[ 2.328862] mmc0: read SD Status register (SSR) after 4 attempts
[ 2.342888] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.354556] Waiting for root device /dev/mmcblk0p2...
[ 2.366404] mmc0: new high speed SDHC card at address 59b4
[ 2.377040] mmcblk0: mmc0:59b4 SDU1 14.7 GiB
[ 2.387677] mmcblk0: p1 p2
[ 2.459376] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 2.470555] Indeed it is in host mode hprt0 = 00001101
[ 2.578341] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.591359] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.603542] devtmpfs: mounted
[ 2.611718] Freeing unused kernel memory: 144K (c0573000 - c0597000)
[ 2.680321] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.692472] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.706449] hub 1-1:1.0: USB hub found
[ 2.715808] hub 1-1:1.0: 5 ports detected
[ 2.999730] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 3.130243] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.143164] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.161812] smsc95xx v1.0.4
[ 3.236710] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:1d:67:75
[ 4.214621] udevd[156]: starting version 175
[ 6.610651] bcm2708-i2s bcm2708-i2s.0: Failed to create debugfs directory
[ 10.328178] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 10.836287] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 16.756411] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 19.566875] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 21.028267] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x4DE1
[ 26.624161] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
[ 412.560610] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 412.667438] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
[ 412.667479] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 412.749048] usbcore: registered new interface driver usbserial
[ 412.752154] usbcore: registered new interface driver usbserial_generic
[ 412.752334] usbserial: USB Serial support registered for generic
[ 412.768847] usbcore: registered new interface driver ftdi_sio
[ 412.771721] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 412.772122] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 412.772714] usb 1-1.2: Detected FT232BM
[ 412.772748] usb 1-1.2: Number of endpoints 2
[ 412.772766] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 412.772787] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 412.772804] usb 1-1.2: Setting MaxPacketSize 64
[ 412.773458] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 412.775031] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 455.075285] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 457.033064] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 458.994321] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 460.955605] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 463.417236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 465.374949] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 467.336443] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 469.297714] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 471.759236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 473.716697] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 475.678359] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 477.639857] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 836.221791] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 838.179573] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 840.166105] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 840.471305] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 841.778382] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 843.242038] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 845.221264] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 845.523841] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 892.242082] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 894.199824] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 896.186196] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 896.491072] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 897.797370] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 899.258042] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 901.239323] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 901.543187] ftdi_sio ttyUSB0: requested CSIZE setting not supported

 

[elcoro]

AW: Aiuto configurazione Oscam Pura - Raspberry - Smargo

ecco la risposta che ti da [ 412.771721] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 412.772122] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 412.772714] usb 1-1.2: Detected FT232BM
[ 412.772748] usb 1-1.2: Number of endpoints 2
[ 412.772766] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[ 412.772787] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[ 412.772804] usb 1-1.2: Setting MaxPacketSize 64
[ 412.773458] ftdi_sio ttyUSB0: Unable to read latency timer: -32
[ 412.775031] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 455.075285] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 457.033064] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 458.994321] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 460.955605] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 463.417236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 465.374949] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 467.336443] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 469.297714] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 471.759236] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 473.716697] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 475.678359] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 477.639857] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 836.221791] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 838.179573] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 840.166105] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 840.471305] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 841.778382] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 843.242038] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 845.221264] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 845.523841] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 892.242082] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 894.199824] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 896.186196] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 896.491072] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 897.797370] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 899.258042] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 901.239323] ftdi_sio ttyUSB0: requested CSIZE setting not supported
[ 901.543187] ftdi_sio ttyUSB0: requested CSIZE setting not supported

ti mancano dei treiber

 

[agnagna]

AW: Aiuto configurazione Oscam Pura - Raspberry - Smargo

Risolto così:
protocol = smartreader
device = 001:004