Risolto Aiuto configurazione oscam per accesso a card server remoto

[dexi1010]

Buongiorno a tutti,
sto tentando da un pò di configurare oscam per accedere ad un server card remoto, per quel che posso capire dai log di oscam e dell'emu cam (sono sotto Mac e uso eyetvcamd + Eyetv), riesco a far loggare l'emu in oscam, ma non ho luce sul cielo, i canali rimangono criptati e non riesco a capire dove sia il problema, se nelle mie configurazioni o se magari nel server card?

Questo è il log di oscam:

Spoiler

12:45:48 0 s starting thread log_list_thread
12:45:48 0 s log_list_thread thread started
12:45:48 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #0 (i686-apple-darwin10)
12:45:48 0 s version=1.20-unstable_svn, build #0, system=i686-apple-darwin10, nice=-1
12:45:48 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
12:45:48 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
12:45:48 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
12:45:48 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
12:45:48 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
12:45:48 0 s signal handling initialized (type=sysv)
12:45:48 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
12:45:48 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
12:45:48 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
12:45:48 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
12:45:48 0 s 2253 entries read from oscam.whitelist
12:45:48 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
12:45:48 0 s Starting listener 0
12:45:48 0 s monitor: disabled
12:45:48 0 s Starting listener 0
12:45:48 0 s camd33: disabled
12:45:48 0 s Starting listener 0
12:45:48 0 s camd35: disabled
12:45:48 0 s Starting listener 0
12:45:48 0 s cs378x: disabled
12:45:48 0 s Starting listener 0
12:45:48 0 s newcamd: initialized (fd=3, port=34000, crypted)
12:45:48 0 s -> CAID: 09CD PROVID: 000000
12:45:48 0 s Starting listener 0
12:45:48 0 s pandora: disabled
12:45:48 0 s Starting listener 0
12:45:48 0 s csp: disabled
12:45:48 0 s Starting listener 0
12:45:48 0 s radegast: disabled
12:45:48 0 s http disabled
12:45:48 0 s starting thread reader check
12:45:48 0 s reader check thread started
12:45:48 0 s starting thread check
12:45:48 0 s check thread started
12:45:48 0 s Binary without Bulcrypt Module - no EMM processing for Bulcrypt possible!
12:45:48 0 s skxitxxa [newcamd] creating thread for device xxx.xxxxx.xxx
12:45:48 1994A00 p proxy xxx.xxxxx.xxx:3004 newcamd525 (fd=0)
12:45:48 1994A00 p skxitxxa [newcamd] proxy initialized, server xxx.xxxxx.xxx:3004
12:45:48 0 s loadbalancer: can't read from file /tmp/.oscam/stat
12:45:48 0 s anti cascading disabled
12:46:08 2194A00 c client connected to 34000 port
12:46:09 2194A00 c encrypted newcamd:34000-client 127.0.0.1 granted (tuner, au=on (1 reader))
12:46:09 2194A00 c user tuner authenticated successfully (eyetvCamd)
12:46:09 2194A00 c AU disabled for user tuner
12:48:12 2194A00 c user tuner reached 120 sec idle limit.
12:48:13 2994A00 c client connected to 34000 port
12:48:13 2994A00 c encrypted newcamd:34000-client 127.0.0.1 granted (tuner, au=on (1 reader))
12:48:13 2994A00 c user tuner authenticated successfully (eyetvCamd)
12:48:13 2994A00 c AU disabled for user tuner
12:48:20 1994A00 p xxx.xxxxx.xxx: resolved ip=xxx.xxx.xxx.xxx
12:48:20 1994A00 p skxitxxa [newcamd] connecting to xxx.xxxxx.xxx:3004
12:48:20 1994A00 p skxitxxa [newcamd] socket open for newcamd fd=7
12:48:25 1994A00 p skxitxxa [newcamd] connect succesfull newcamd fd=7
12:48:25 2994A00 c tuner (09CD&000000/0000/2AB8/B7:3886): timeout (5001 ms) by skxitxxa
12:48:30 1994A00 p skxitxxa [newcamd] tcp_conn_close(): fd=7, cl->typ == 'p' is_udp 0 reason receive error1
12:48:30 1994A00 p expected MSG_CLIENT_2_SERVER_LOGIN_ACK (E1), received FF
12:48:30 1994A00 p dropping client data for skxitxxa time 10s

Questi i file di configurazione:

oscam.server

Spoiler

[reader]
label = skxitxxa
protocol = newcamd
device = xxx.xxxxx.xxx,3004
user = pinco
password = pallino
group = 1
emmcache = 1,3,2
enable = 1
#cccversion = 2.2.1
#ccmaxhops = 2
#ccckeepalive = 1

oscam.conf:

Spoiler

[global]
nice = -1
WaitForCards = 0
logfile = stdout

[newcamd]
key = 0102030405060708091011121314
port = 34000@09CD:000000

oscam.user:

Spoiler

[account]
user = tuner
pwd = tuner
group = 1
#caid = 09CD
au = skxitxxa

Questo invece è il log dell'emu cam (eyetvcamd):

Spoiler

[core.load] ** registered systems:
[core.load] ** Seca (pri -10)
[core.load] ** Irdeto (pri -10)
[core.load] ** Cryptoworks (pri -10)
[core.load] ** ConstCW (pri -20)
[core.load] ** Conax (pri -10)
[core.load] ** Nagra2 (pri -10)
[core.load] ** Nagra (pri -10)
newcamd: connected to server 127.0.0.1:34000.
newcamd: 127.0.0.1:34000: random bytes received...
newcamd: 127.0.0.1:34000: send DATA_REQ...
newcamd: 127.0.0.1:34000: Authorization done.
newcamd: 127.0.0.1:34000: Cards present:
newcamd: 127.0.0.1:34000: CAID 09cd, IDENT 000000
cwdwplug: plugin initialized
cwdwplug: GetInfo
cwdwplug: Device with id 101 and Index = 0 added
cwdwplug: service change API called: globals = 0x3251e00, deviceid = 101
cwdwplug: pidsCount changed from 0 to 19
cwdwplug: ServiceChanged:
cwdwplug: Active PID: 0, type: 9
cwdwplug: Active PID: b0, type: 0
cwdwplug: Active PID: 1d1, type: 1
cwdwplug: Active PID: 1d2, type: 1
cwdwplug: Active PID: 318, type: 5
cwdwplug: Active PID: 651, type: 5
cwdwplug: Active PID: 6b5, type: 5
cwdwplug: Active PID: 719, type: 5
cwdwplug: Active PID: 7e5, type: 5
cwdwplug: Active PID: 83b, type: 5
cwdwplug: Active PID: 898, type: 5
cwdwplug: Active PID: 1589, type: 5
cwdwplug: Active PID: 16c4, type: 5
cwdwplug: Active PID: 463, type: 4
cwdwplug: Active PID: b0, type: 3
cwdwplug: Active PID: 11, type: 9
cwdwplug: Active PID: 12, type: 9
cwdwplug: Active PID: 14, type: 9
cwdwplug: Active PID: 13, type: 9
cwdwplug: HeadendID: 82, TransponderID: b59460, ServiceID: 2d58, PMT pid: 463
cwdwplug: plugin terminated (**** qui è quando lo chiudo io ****)

Grazie mille a chi magari mi dà una dritta!

 

[giuseppe001sub]

AW: Aiuto configurazione oscam per accesso a card server remoto

ciao prima potevi passare nella zona presentazione é salutare la comunita...

 

[meister85]

AW: Aiuto configurazione oscam per accesso a card server remoto

Cmq benvenuto sul Forum...

Non ti puo funzionare, il proxy lo devi modificare.

guarda e leggi questo how-to --> How-To Connettere con Oscam su CCcam/Newcamd Proxy

 

[dexi1010]

Re: AW: Aiuto configurazione oscam per accesso a card server remoto

Ciao a tutti, grazie per il benvenuto e scusate se sono passato direttamente alla richiesta senza le presentazioni, deve essere la frustrazione delle decine di configurazioni provate

Allora grazie intanto meister per la risposta.
Avevo in realtà già visto quel post ma ora ho dato di nuovo un'occhiata.

Ho provato a modificare oscam.server:

Spoiler

[reader]
label = skxitxxa
protocol = newcamd
key = 0102030405060708091011121314
device = xxx.xxxxx.xxx,3004
user = pinco
password = pallino
group = 1
emmcache = 1,3,2
enable = 1
caid = 09CD
ident = 09CD:000000

ho cioè inserito la voce key, e le voci caid e ident che prima mancavano (in realtà erano commentate perchè qualche prova l'avevo fatta anche con quelle abilitate)

nulla da fare. Riesci ad essere più specifico sull'errore che faccio e/o quali voci per il proxy?

 

[meister85]

AW: Aiuto configurazione oscam per accesso a card server remoto

cosa ti dice ora il oscam log?

 

[dexi1010]

AW: Aiuto configurazione oscam per accesso a card server remoto

pausa natalizia, mi sembrava non cambiasse ma te lo posto appena rifaccio la prova.

Ecco, riprovato:

Spoiler

21:23:08 0 s starting thread log_list_thread
21:23:08 0 s log_list_thread thread started
21:23:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #0 (i686-apple-darwin10)
21:23:08 0 s version=1.20-unstable_svn, build #0, system=i686-apple-darwin10, nice=-1
21:23:08 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
21:23:08 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
21:23:08 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
21:23:08 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
21:23:08 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
21:23:08 0 s signal handling initialized (type=sysv)
21:23:08 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
21:23:08 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
21:23:08 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
21:23:08 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
21:23:08 0 s 2253 entries read from oscam.whitelist
21:23:08 0 s can't open cacheex-matcher file /usr/local/etc/oscam.cacheex
21:23:08 0 s Starting listener 0
21:23:08 0 s monitor: disabled
21:23:08 0 s Starting listener 0
21:23:08 0 s camd33: disabled
21:23:08 0 s Starting listener 0
21:23:08 0 s camd35: disabled
21:23:08 0 s Starting listener 0
21:23:08 0 s cs378x: disabled
21:23:08 0 s Starting listener 0
21:23:08 0 s newcamd: initialized (fd=3, port=34000, crypted)
21:23:08 0 s -> CAID: 09CD PROVID: 000000
21:23:08 0 s Starting listener 0
21:23:08 0 s pandora: disabled
21:23:08 0 s Starting listener 0
21:23:08 0 s csp: disabled
21:23:08 0 s Starting listener 0
21:23:08 0 s radegast: disabled
21:23:08 0 s http disabled
21:23:08 0 s starting thread reader check
21:23:08 0 s reader check thread started
21:23:08 0 s starting thread check
21:23:08 0 s check thread started
21:23:08 0 s Binary without Bulcrypt Module - no EMM processing for Bulcrypt possible!
21:23:08 0 s skyitalia [newcamd] creating thread for device xxx.xxx.xxx
21:23:08 1A26E00 p proxy xxx.xxx.xxx:7004 newcamd525 (fd=0)
21:23:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
21:23:08 0 s anti cascading disabled
21:23:08 1A26E00 p skyitalia [newcamd] proxy initialized, server xxx.xxx.xxx:7004
21:23:16 222F800 c client connected to 34000 port
21:23:21 222F800 c encrypted newcamd:34000-client 127.0.0.1 granted (tuner, au=on (1 reader))
21:23:21 222F800 c user tuner authenticated successfully (eyetvCamd)
21:23:21 222F800 c AU disabled for user tuner
21:23:35 1A26E00 p xxx.xxx.xxx: resolved ip=xxx.xxx.xxx.xxx
21:23:35 1A26E00 p skyitalia [newcamd] connecting to xxx.xxx.xxx:7004
21:23:35 1A26E00 p skyitalia [newcamd] socket open for newcamd fd=7
21:23:35 1A26E00 p skyitalia [newcamd] connect succesfull newcamd fd=7
21:23:35 1A26E00 p Newcamd Server: xxx.xxx.xxx:7004 - UserID: 0
21:23:35 1A26E00 p CAID: 09CD - UA: 0000000000000000 - Provider # 1
21:23:35 1A26E00 p Provider ID: 000000 - SA: 00000000
21:23:40 222F800 c tuner (09CD&000000/0000/2D58/B7:C017): timeout (5001 ms) by skyitalia
21:23:45 222F800 c tuner (09CD&000000/0000/2D58/B7:1D0D): timeout (5001 ms) by skyitalia
21:23:55 222F800 c tuner (09CD&000000/0000/2D58/B7:683B): timeout (5001 ms) by skyitalia
21:24:16 222F800 c tuner (09CD&000000/0000/0F41/B7:958C): timeout (5001 ms) by skyitalia
21:24:17 222F800 c tuner (09CD&000000/0000/0F41/B7:34FE): timeout (5001 ms) by skyitalia
21:24:22 222F800 c tuner (09CD&000000/0000/2C61/B7:8D75): timeout (5001 ms) by skyitalia
21:24:25 222F800 c tuner (09CD&000000/0000/2C61/B7:34C0): not found (3381 ms) by skyitalia
21:24:32 222F800 c tuner (09CD&000000/0000/2C61/B7:8D7E): not found (91 ms) by skyitalia
21:24:47 222F800 c tuner (09CD&000000/0000/2C61/B7:EE65): timeout (5001 ms) by skyitalia
21:24:57 222F800 c tuner (09CD&000000/0000/2C61/B7:FC0A): timeout (5001 ms) by skyitalia
21:25:07 222F800 c tuner (09CD&000000/0000/2C61/B7:47A2): timeout (5001 ms) by skyitalia
21:25:17 222F800 c tuner (09CD&000000/0000/2C61/B7:900D): timeout (5001 ms) by skyitalia
21:25:27 222F800 c tuner (09CD&000000/0000/2C6D/B7:98DF): timeout (5002 ms) by skyitalia

ma non mi da luce, giro per i canali e risultano criptati. Si vede qualche errore dall'oscam o così com'è dovrei aver luce?

 

[meister85]

AW: Aiuto configurazione oscam per accesso a card server remoto

Prova a togliere nella oscam.server il caid e l´ident!

non dimenticare di fare un oscam restart

 

[dexi1010]

ohhh! Risolto! togliere il caid e l'ident ha funzionato! Finalmente, grazie!
Ora il problema è che la visione si blocca ogni tot secondi:

Spoiler

00:59:16 19A4C00 c tuner (09CD&000000/0000/106A/B7:C534): found (53 ms) by skyitalia
00:59:18 19A4C00 c tuner (09CD&000000/0000/106A/B7:0465): found (438 ms) by skyitalia
00:59:27 19A4C00 c tuner (09CD&000000/0000/106A/B7E1B): found (205 ms) by skyitalia
00:59:37 19A4C00 c tuner (09CD&000000/0000/106A/B7:1BD4): not found (74 ms) by skyitalia
00:59:47 19A4C00 c tuner (09CD&000000/0000/106A/B7:0CA4): not found (113 ms) by skyitalia
00:59:57 19A4C00 c tuner (09CD&000000/0000/106A/B7:F19E): not found (54 ms) by skyitalia
01:00:07 19A4C00 c tuner (09CD&000000/0000/106A/B7A7F): not found (56 ms) by skyitalia
01:00:17 19A4C00 c tuner (09CD&000000/0000/106A/B7:C31A): not found (54 ms) by skyitalia

in corrispondenza dei "not found" nel log. Dipende dalla connessione al server e dall'affollamento? Ho fatto i test con un free server.

 

[meister85]

AW: Aiuto configurazione oscam per accesso a card server remoto

Dipende dalla connessione al server e dall'affollamento?

Esatto! Tutti questi free server sono una merda. Ti conviene ti abbonarsi oppure scambiare un abo con altri....

lascia perdere free e payserver!

Visto che hai risolto, posso chiudere?

 

[dexi1010]

AW: Aiuto configurazione oscam per accesso a card server remoto

Si certo! Grazie ancora, è stata dura ma il tuo aiuto indispensabile!