Stimmen meine Oscam Dateien?

[dodo83]

AW: Stimmen meine Oscam Dateien?

stimmt, aktuelle oscam drauf und per oscam webif oscam.dvbapi einrichten

P:09C4
I:0

hier probiers du ORF1 HD zu entschlüsseln

Spoiler

2013/04/04 18:28:10 758874B0 c serverbox (0648&000000/132F/4C:E821): rejected group (1 ms) (of 0 avail 0) (no matching reader)
2013/04/04 18:28:10 758874B0 c serverbox (0648&000000/132F/4C:44BC): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2013/04/04 18:28:10 758874B0 c serverbox (1702&000000/132F/93:2AB2): rejected group (0 ms) (of 0 avail 0) (no matching reader)

läuft sky auf der serverbox

 

[andrechas]

AW: Stimmen meine Oscam Dateien?

ja auf der serverbox funktioniert sky, orf, eigentlich alles was laufen sollte

 

[dodo83]

AW: Stimmen meine Oscam Dateien?

läuft die serverbox nur mit oscam? weil laut dem log probiert oscam orf zu entschlüsseln was nicht geht

 

[andrechas]

AW: Stimmen meine Oscam Dateien?

ja ich habe cccam 2.3.0 auch noch oben auf dem server.

Habe jetzt upgedated und dvbapi geändert, wie du gesagt hast.

leider wird immer noch nichts hell weder sky noch orf.

log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Apr 4 21:14:04 2013
-------------------------------------------------------------------------------
2013/04/04 21:14:04 0 s starting thread log_list_thread
2013/04/04 21:14:04 0 s log_list_thread thread started
2013/04/04 21:14:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/04/04 21:14:04 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/04/04 21:14:04 0 s client max. idle=120 sec, debug level=0
2013/04/04 21:14:04 0 s max. logsize=200 Kb, loghistorysize=4096 bytes
2013/04/04 21:14:04 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/04/04 21:14:04 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2013/04/04 21:14:04 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/04/04 21:14:04 0 s signal handling initialized (type=sysv)
2013/04/04 21:14:04 0 s 164 service-id's loaded in 9ms
2013/04/04 21:14:04 0 s oscam.tiers loading failed
2013/04/04 21:14:04 0 s 14 provid's loaded
2013/04/04 21:14:04 0 s 0 lengths for caid guessing loaded
2013/04/04 21:14:04 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/04/04 21:14:04 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s monitor: disabled
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s camd35: disabled
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s cs378x: disabled
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s newcamd: disabled
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s cccam: initialized (fd=5, port=64000, crypted)
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s pandora: disabled
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s csp: disabled
2013/04/04 21:14:04 0 s Starting listener 0
2013/04/04 21:14:04 0 s radegast: disabled
2013/04/04 21:14:04 0 s starting thread http
2013/04/04 21:14:04 0 s http thread started
2013/04/04 21:14:04 0 s starting thread reader check
2013/04/04 21:14:04 0 s reader check thread started
2013/04/04 21:14:04 0 s starting thread check
2013/04/04 21:14:04 0 s check thread started
2013/04/04 21:14:04 0 s creating thread for device /dev/sci0
2013/04/04 21:14:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/04 21:14:04 0 s waiting for local card init
2013/04/04 21:14:04 580558 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/04/04 21:14:04 58B0E0 h HTTP Server listening on port 17000
2013/04/04 21:14:09 580558 r v13 card detected
2013/04/04 21:14:14 580558 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 21:14:14 580558 r ERROR: 0 characters found in ATR
2013/04/04 21:14:14 580558 r Error activating card.
2013/04/04 21:14:16 580558 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 21:14:16 580558 r ATR is malformed, it reports 8 historical bytes but there are only 2
2013/04/04 21:14:17 580558 r ATR: 7B F8 45 80 04 00 80 44
2013/04/04 21:14:17 580558 r ERROR: Could not read reader->convention
2013/04/04 21:14:17 580558 r Error activating card.
2013/04/04 21:14:22 580558 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 21:14:22 580558 r ATR: 78 F8 40 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 21:14:22 580558 r ERROR: Could not read reader->convention
2013/04/04 21:14:22 580558 r Error activating card.
2013/04/04 21:14:22 580558 r card initializing error
2013/04/04 21:14:23 0 s init for all local cards done
2013/04/04 21:14:23 0 s anti cascading disabled
2013/04/04 21:14:23 58E608 c plain dvbapi-client granted (serverbox, au=on (1 reader))
2013/04/04 21:14:23 58E608 c dvbapi: 2 entries read from oscam.dvbapi
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 176A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 166A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 2] CAID: 1833 ECM_PID: 186A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 3] CAID: 1834 ECM_PID: 1C6A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 4] CAID: 09C4 ECM_PID: 1B6A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 5] CAID: 09C7 ECM_PID: 1D6A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 6] CAID: 09AF ECM_PID: 1F6A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 7] CAID: 098C ECM_PID: 1A6A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: [ADD PID 8] CAID: 1861 ECM_PID: 196A PROVID: 000000
2013/04/04 21:14:24 58E608 c dvbapi: new program number: 00DD (1702:00DD unknown) [pmt_list_management 3]
2013/04/04 21:14:24 58E608 c dvbapi: try pids again #1
2013/04/04 21:14:24 58E608 c dvbapi: try pids again #2
2013/04/04 21:14:24 58E608 c dvbapi: try pids again #3
2013/04/04 21:14:24 58E608 c dvbapi: can't decode channel
2013/04/04 21:56:36 5907C0 c encrypted cccam-client 10.0.0.7 granted (user, au=off)
2013/04/04 21:57:08 5907C0 c user (09C4&000000/0000/002A/B3:E538): rejected group (4 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:12 5907C0 c user (09C4&000000/0000/002A/B3:93EC): rejected group (0 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:19 5907C0 c user (09C4&000000/0000/002A/B3:095F): rejected group (0 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:31 5907C0 c user (09C4&000000/0000/002A/B3:B4AF): rejected group (1 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:31 5907C0 c user (09C4&000000/0000/0022/B3:04E4): rejected group (0 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:45 5907C0 c user (09C4&000000/0000/0022/B3:7EA4): rejected group (0 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:56 5907C0 c user (09C4&000000/0000/0022/B3:B6CA): rejected group (1 ms) (0 of 0) (no matching reader)
2013/04/04 21:57:58 5907C0 c user (09C4&000000/0000/0011/B3:7243): rejected group (0 ms) (0 of 0) (no matching reader)
2013/04/04 21:58:02 5907C0 c user (09C4&000000/0000/0011/B3:783D): rejected group (1 ms) (0 of 0) (no matching reader)
2013/04/04 21:58:12 5907C0 c user (09C4&000000/0000/0011/B3:7C47): rejected group (0 ms) (0 of 0) (no matching reader)

lg und sorry dass ich nerve

 

[bombadil]

AW: Stimmen meine Oscam Dateien?

Hi,

erst muss deine Karte gelesen werden, dann kann es hell werden.

Kannst du bitte noch einmal deine aktuelle oscam,server posten? Steckt die Karte richtig?

Gruß
Bombadil

 

[andrechas]

AW: Stimmen meine Oscam Dateien?

ja, karte steckt richtig. kann auf server alles gucken, wenn ichs raus tue, gehts nimma.

oscam.server

Spoiler

[reader] label = V13
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
services=SkyGermanyMitHDPlus
boxid = 12345678
detect = CD
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
ins7e11=15
ndsversion=2

lg

 

[dodo83]

AW: Stimmen meine Oscam Dateien?

ich hab auch mal vor kurzem noch "genervt", mach ich immer noch nur nicht so oft :emoticon-0137-clapp

dann mal das cccam aus, nur oscam laufen lassen, hast Du schon auf eine neuere version gewechselt? wegen dem fastmode eintrag

 

[bombadil]

AW: Stimmen meine Oscam Dateien?

Hi,

jetzt kann ich nicht mehr folgen.

kann auf server alles gucken

wo gehört denn bitte das Log hin aus Post #19

Gruß
Bombadil

 

[andrechas]

AW: Stimmen meine Oscam Dateien?

ja, hab jetzt die version 1.20 oben vom feed.

hab jetzt cccam aus. sehe dementsprechend auch gar nichts mehr.

log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Apr 4 22:20:43 2013
-------------------------------------------------------------------------------
2013/04/04 22:20:43 0 s starting thread log_list_thread
2013/04/04 22:20:43 0 s log_list_thread thread started
2013/04/04 22:20:43 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/04/04 22:20:43 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/04/04 22:20:43 0 s client max. idle=120 sec, debug level=0
2013/04/04 22:20:43 0 s max. logsize=200 Kb, loghistorysize=4096 bytes
2013/04/04 22:20:43 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/04/04 22:20:43 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2013/04/04 22:20:43 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/04/04 22:20:43 0 s signal handling initialized (type=sysv)
2013/04/04 22:20:43 0 s 164 service-id's loaded in 13ms
2013/04/04 22:20:43 0 s oscam.tiers loading failed
2013/04/04 22:20:43 0 s 14 provid's loaded
2013/04/04 22:20:43 0 s 0 lengths for caid guessing loaded
2013/04/04 22:20:43 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/04/04 22:20:43 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s monitor: disabled
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s camd35: disabled
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s cs378x: disabled
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s newcamd: disabled
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s cccam: initialized (fd=5, port=64000, crypted)
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s pandora: disabled
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s csp: disabled
2013/04/04 22:20:43 0 s Starting listener 0
2013/04/04 22:20:43 0 s radegast: disabled
2013/04/04 22:20:43 0 s starting thread http
2013/04/04 22:20:43 0 s http thread started
2013/04/04 22:20:43 0 s starting thread reader check
2013/04/04 22:20:43 0 s reader check thread started
2013/04/04 22:20:43 0 s starting thread check
2013/04/04 22:20:43 0 s check thread started
2013/04/04 22:20:43 0 s creating thread for device /dev/sci0
2013/04/04 22:20:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/04 22:20:43 0 s waiting for local card init
2013/04/04 22:20:43 580540 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/04/04 22:20:43 58C350 h HTTP Server listening on port 17000
2013/04/04 22:20:44 580540 r v13 card detected
2013/04/04 22:20:47 580540 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:20:47 580540 r ATR: 78 F8 40 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:20:47 580540 r ERROR: Could not read reader->convention
2013/04/04 22:20:47 580540 r Error activating card.
2013/04/04 22:20:48 580540 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:20:48 580540 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:20:49 580540 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:20:49 580540 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:20:51 580540 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:20:51 580540 r found cardsystem videoguard2
2013/04/04 22:20:51 580540 r [videoguard2-reader] v13 card detected
2013/04/04 22:20:51 580540 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:20:52 580540 r creating thread for device /dev/sci0
2013/04/04 22:20:52 58E830 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:20:52 58E830 r v13 card detected
2013/04/04 22:20:52 0 s init for all local cards done
2013/04/04 22:20:52 0 s anti cascading disabled
2013/04/04 22:20:52 590C68 c plain dvbapi-client granted (serverbox, au=on (1 reader))
2013/04/04 22:20:52 592E20 c anonymous disconnected from 10.0.0.7
2013/04/04 22:20:52 592E20 c thread 7349B4B0 ended!
2013/04/04 22:20:52 590C68 c dvbapi: 2 entries read from oscam.dvbapi
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 176A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 1] CAID: 1722 ECM_PID: 166A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 2] CAID: 1833 ECM_PID: 186A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 3] CAID: 1834 ECM_PID: 1C6A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 4] CAID: 09C4 ECM_PID: 1B6A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 5] CAID: 09C7 ECM_PID: 1D6A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 6] CAID: 09AF ECM_PID: 1F6A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 7] CAID: 098C ECM_PID: 1A6A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: [ADD PID 8] CAID: 1861 ECM_PID: 196A PROVID: 000000
2013/04/04 22:20:53 590C68 c dvbapi: new program number: 00DD (1702:00DD unknown) [pmt_list_management 3]
2013/04/04 22:20:53 590C68 c dvbapi: try pids again #1
2013/04/04 22:20:53 590C68 c dvbapi: try pids again #2
2013/04/04 22:20:53 590C68 c dvbapi: try pids again #3
2013/04/04 22:20:53 590C68 c dvbapi: can't decode channel
2013/04/04 22:20:55 58E830 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:20:55 58E830 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:20:55 58E830 r ERROR: Could not read reader->convention
2013/04/04 22:20:55 58E830 r Error activating card.
2013/04/04 22:20:56 58E830 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:20:56 58E830 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:20:57 596160 c encrypted cccam-client 10.0.0.7 granted (user, au=off)
2013/04/04 22:20:57 58E830 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:20:57 58E830 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:20:59 58E830 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:20:59 58E830 r found cardsystem videoguard2
2013/04/04 22:20:59 58E830 r [videoguard2-reader] v13 card detected
2013/04/04 22:20:59 58E830 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:00 58E830 r creating thread for device /dev/sci0
2013/04/04 22:21:00 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:00 592E20 r v13 card detected
2013/04/04 22:21:03 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:03 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:03 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:21:03 592E20 r Error activating card.
2013/04/04 22:21:04 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:04 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:05 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:05 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:07 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:07 592E20 r found cardsystem videoguard2
2013/04/04 22:21:07 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:07 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:08 592E20 r creating thread for device /dev/sci0
2013/04/04 22:21:08 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:08 5804D8 r v13 card detected
2013/04/04 22:21:11 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:11 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:11 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:21:11 5804D8 r Error activating card.
2013/04/04 22:21:12 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:12 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:13 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:13 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:15 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:15 5804D8 r found cardsystem videoguard2
2013/04/04 22:21:15 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:15 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:16 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:21:16 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:16 592E20 r v13 card detected
2013/04/04 22:21:19 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:19 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:19 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:21:19 592E20 r Error activating card.
2013/04/04 22:21:20 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:20 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:21 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:21 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:23 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:23 592E20 r found cardsystem videoguard2
2013/04/04 22:21:23 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:23 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:24 592E20 r creating thread for device /dev/sci0
2013/04/04 22:21:24 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:24 5804D8 r v13 card detected
2013/04/04 22:21:27 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:27 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:21:27 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:21:27 5804D8 r Error activating card.
2013/04/04 22:21:28 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:28 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:29 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:29 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:31 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:31 5804D8 r found cardsystem videoguard2
2013/04/04 22:21:31 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:31 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:32 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:21:32 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:32 592E20 r v13 card detected
2013/04/04 22:21:35 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:35 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:35 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:21:35 592E20 r Error activating card.
2013/04/04 22:21:36 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:36 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:37 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:37 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:39 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:39 592E20 r found cardsystem videoguard2
2013/04/04 22:21:39 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:39 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:40 592E20 r creating thread for device /dev/sci0
2013/04/04 22:21:40 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:40 5804D8 r v13 card detected
2013/04/04 22:21:43 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:43 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:43 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:21:43 5804D8 r Error activating card.
2013/04/04 22:21:44 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:44 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:45 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:45 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:47 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:47 5804D8 r found cardsystem videoguard2
2013/04/04 22:21:47 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:47 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:48 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:21:48 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:48 592E20 r v13 card detected
2013/04/04 22:21:51 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:51 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:51 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:21:51 592E20 r Error activating card.
2013/04/04 22:21:52 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:52 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:21:53 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:53 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:21:55 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:21:55 592E20 r found cardsystem videoguard2
2013/04/04 22:21:55 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:21:55 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:21:56 592E20 r creating thread for device /dev/sci0
2013/04/04 22:21:56 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:21:56 5804D8 r v13 card detected
2013/04/04 22:21:59 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:21:59 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:21:59 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:21:59 5804D8 r Error activating card.
2013/04/04 22:22:00 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:00 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:01 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:01 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:03 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:03 5804D8 r found cardsystem videoguard2
2013/04/04 22:22:03 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:03 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:04 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:22:04 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:04 592E20 r v13 card detected
2013/04/04 22:22:07 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:07 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:22:07 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:22:07 592E20 r Error activating card.
2013/04/04 22:22:08 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:08 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:09 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:09 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:11 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:11 592E20 r found cardsystem videoguard2
2013/04/04 22:22:11 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:11 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:12 592E20 r creating thread for device /dev/sci0
2013/04/04 22:22:12 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:12 5804D8 r v13 card detected
2013/04/04 22:22:15 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:15 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:22:15 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:22:15 5804D8 r Error activating card.
2013/04/04 22:22:16 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:16 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:17 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:17 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:19 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:19 5804D8 r found cardsystem videoguard2
2013/04/04 22:22:19 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:19 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:20 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:22:20 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:20 592E20 r v13 card detected
2013/04/04 22:22:23 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:23 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:22:23 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:22:23 592E20 r Error activating card.
2013/04/04 22:22:24 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:24 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:25 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:25 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:27 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:27 592E20 r found cardsystem videoguard2
2013/04/04 22:22:27 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:27 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:28 592E20 r creating thread for device /dev/sci0
2013/04/04 22:22:28 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:28 5804D8 r v13 card detected
2013/04/04 22:22:31 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:31 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:22:31 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:22:31 5804D8 r Error activating card.
2013/04/04 22:22:32 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:32 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:33 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:33 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:35 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:35 5804D8 r found cardsystem videoguard2
2013/04/04 22:22:35 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:35 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:36 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:22:36 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:36 592E20 r v13 card detected
2013/04/04 22:22:39 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:39 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:22:39 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:22:39 592E20 r Error activating card.
2013/04/04 22:22:40 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:40 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:41 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:41 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:43 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:43 592E20 r found cardsystem videoguard2
2013/04/04 22:22:43 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:43 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:44 592E20 r creating thread for device /dev/sci0
2013/04/04 22:22:44 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:44 5804D8 r v13 card detected
2013/04/04 22:22:47 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:47 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:22:47 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:22:47 5804D8 r Error activating card.
2013/04/04 22:22:48 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:48 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:49 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:49 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:51 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:51 5804D8 r found cardsystem videoguard2
2013/04/04 22:22:51 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:51 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:22:52 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:22:52 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:22:52 592E20 r v13 card detected
2013/04/04 22:22:55 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:55 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:22:55 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:22:55 592E20 r Error activating card.
2013/04/04 22:22:56 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:56 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:22:57 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:22:57 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:22:59 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:22:59 592E20 r found cardsystem videoguard2
2013/04/04 22:22:59 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:22:59 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:00 592E20 r creating thread for device /dev/sci0
2013/04/04 22:23:00 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:00 5804D8 r v13 card detected
2013/04/04 22:23:03 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:03 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:23:03 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:23:03 5804D8 r Error activating card.
2013/04/04 22:23:04 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:04 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:05 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:05 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:07 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:07 5804D8 r found cardsystem videoguard2
2013/04/04 22:23:07 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:07 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:08 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:23:08 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:08 592E20 r v13 card detected
2013/04/04 22:23:11 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:11 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:23:11 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:23:11 592E20 r Error activating card.
2013/04/04 22:23:12 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:12 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:13 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:13 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:15 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:15 592E20 r found cardsystem videoguard2
2013/04/04 22:23:15 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:15 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:16 592E20 r creating thread for device /dev/sci0
2013/04/04 22:23:16 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:16 5804D8 r v13 card detected
2013/04/04 22:23:19 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:19 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:23:19 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:23:19 5804D8 r Error activating card.
2013/04/04 22:23:20 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:20 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:21 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:21 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:23 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:23 5804D8 r found cardsystem videoguard2
2013/04/04 22:23:23 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:23 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:24 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:23:24 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:24 592E20 r v13 card detected
2013/04/04 22:23:27 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:27 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:23:27 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:23:27 592E20 r Error activating card.
2013/04/04 22:23:28 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:28 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:29 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:29 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:31 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:31 592E20 r found cardsystem videoguard2
2013/04/04 22:23:31 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:31 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:32 592E20 r creating thread for device /dev/sci0
2013/04/04 22:23:32 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:32 5804D8 r v13 card detected
2013/04/04 22:23:35 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:35 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:23:35 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:23:35 5804D8 r Error activating card.
2013/04/04 22:23:36 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:36 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:37 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:37 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:39 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:39 5804D8 r found cardsystem videoguard2
2013/04/04 22:23:39 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:39 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:40 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:23:40 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:40 592E20 r v13 card detected
2013/04/04 22:23:43 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:43 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:23:43 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:23:43 592E20 r Error activating card.
2013/04/04 22:23:44 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:44 592E20 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:45 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:45 592E20 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:47 592E20 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:47 592E20 r found cardsystem videoguard2
2013/04/04 22:23:47 592E20 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:47 592E20 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:48 592E20 r creating thread for device /dev/sci0
2013/04/04 22:23:48 5804D8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:48 5804D8 r v13 card detected
2013/04/04 22:23:51 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:51 5804D8 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2013/04/04 22:23:51 5804D8 r ERROR: Could not read reader->convention
2013/04/04 22:23:51 5804D8 r Error activating card.
2013/04/04 22:23:52 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:52 5804D8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/04 22:23:53 5804D8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:53 5804D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/04/04 22:23:55 5804D8 r [videoguard2-reader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2013/04/04 22:23:55 5804D8 r found cardsystem videoguard2
2013/04/04 22:23:55 5804D8 r [videoguard2-reader] v13 card detected
2013/04/04 22:23:55 5804D8 r [videoguard2-reader] type: VideoGuard Sky Germany
2013/04/04 22:23:56 5804D8 r creating thread for device /dev/sci0
2013/04/04 22:23:56 592E20 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/04/04 22:23:56 592E20 r v13 card detected
2013/04/04 22:23:59 592E20 r ERROR in IO_Serial_Read (errno=0 Success)
2013/04/04 22:23:59 592E20 r ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2013/04/04 22:23:59 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:23:59 592E20 r Error activating card.

- - - - - - - - - -

Spoiler

Hi,

jetzt kann ich nicht mehr folgen. wo gehört denn bitte das Log hin aus Post #19

Gruß
Bombadil

oscam.log

oder was meinst?

 

[dodo83]

AW: Stimmen meine Oscam Dateien?

ich vermutte mal grob das lief vorhin über cccam, deswegen konntest Du "alles sehen"
über oscam siehts so aus das die karte nicht richtig erkannt wird

2013/04/04 22:23:59 592E20 r ERROR: Could not read reader->convention
2013/04/04 22:23:59 592E20 r Error activating card.

oscam würde ich nochmals aktualisieren, nimm mal eine version über 8000, die du jetzt hast (6636) ist auch recht alt

und nimm die einträge aus dem reader erstmal raus

ins7e11=15
ndsversion=2

 

[bombadil]

AW: Stimmen meine Oscam Dateien?

Hi,

ich meine damit, wie dodo83 auch schon anmerkte, dass Oscam deine Karte nicht liest. Ich wundere mich darüber, dass du sagst, du hast ein Bild.

Du hättest aber mal deutlicher machen können, dass du Oscam+Cccam startest. Das kann so nicht funktionieren, schon gar nicht, wenn du auch noch die DVBAPI Sektion in der oscam.conf aktivierst.

1. wird sich CCCam die Karte krallen und ist daher für Oscam nicht mehr verfügbar.
2. mußt du dich entscheiden womit du das Bild auf den TV bekommst. Entweder mit CCCam, dann lass Oscam aus dem Spiel oder mit der Schnittstelle DVBAPI des Oscam. Beides kann und wird auch bei dir nicht gehen.

Start Oscam ohne CCcam und schau dir das Log an. Erst dann können wir hier weiter machen.

Grüße
Bombadil

 

[andrechas]

AW: Stimmen meine Oscam Dateien?

ok, sorry, dachte, dass die beiden parallel laufen können.

Werde nach der arbeit nochmal updaten und das noch mal probieren.

Danke nochmals

Lg

 

[bombadil]

AW: Stimmen meine Oscam Dateien?

Hi,

Oscam und CCcam können durchaus parallel laufen. Du musst dabei eben einiges beachten. Oscam muss vor CCcam gestartet sein und die Karte gelesen haben. Dann kann CCcam starten und per N-Line die Daten von Oscam bekommen. CCcam zaubert dir dann auch das Bild auf den TV.

Was nicht geht:
CCcam parallel zur DVBAPI (oscam.conf). Die beiden bekommen Streit miteinander, da beide dann das Bild machen wollen.

Oscam ist ein reiner Cardserver und braucht die DVBAPI Schnittstelle, Cccam ist eine Emulation mit beiden Funktionen.

Grüße
Bombadil

 

[andrechas]

Es seids die bestn!!!

Habe jetzt das neueste oscam oben und ins7e11 gelöscht und sky funktioniert auf beiden boxen. jetzt hab ich bloß noch das problem mit dem orf.

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Apr 5 16:21:04 2013
-------------------------------------------------------------------------------
2013/04/05 16:21:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8560 (mipsel-unknown-linux-gnu-ssl)
2013/04/05 16:21:04 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 271
2013/04/05 16:21:04 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/04/05 16:21:04 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/04/05 16:21:04 0 s signal handling initialized
2013/04/05 16:21:04 0 s 164 service-id's loaded in 13ms
2013/04/05 16:21:04 0 s 14 provid's loaded
2013/04/05 16:21:04 0 s cccam: initialized (fd=4, port=64000)
2013/04/05 16:21:04 0 s V13 [internal] creating thread for device /dev/sci0
2013/04/05 16:21:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/04/05 16:21:04 0 s waiting for local card init
2013/04/05 16:21:04 50E220 r V13 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/04/05 16:21:04 512378 h webif: decompressed 52462 bytes back into 151752 bytes
2013/04/05 16:21:04 512378 h HTTP Server listening on port 17000
2013/04/05 16:21:05 50E220 r V13 [internal] card detected
2013/04/05 16:21:05 50E220 r V13 [internal] ATR: 78 F8 40 88 14 00 01 04 8F F8 31 05 00 00
2013/04/05 16:21:05 50E220 r V13 [internal] ERROR: Could not read reader->convention
2013/04/05 16:21:05 50E220 r V13 [internal] Error activating card.
2013/04/05 16:21:05 50E220 r V13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2013/04/05 16:21:05 50E220 r V13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/04/05 16:21:05 50E220 r V13 [internal] Calculated work ETU is 74.40 us
2013/04/05 16:21:06 50E220 r V13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/04/05 16:21:08 50E220 r V13 [internal] Card type: P1TV
2013/04/05 16:21:08 50E220 r V13 [internal] Rom version: 10A7
2013/04/05 16:21:09 50E220 r V13 [internal] parental lock setting: FF FF FF FF
2013/04/05 16:21:09 50E220 r V13 [internal] type: VideoGuard Sky Germany (09C4), caid: 09C4
2013/04/05 16:21:09 50E220 r V13 [internal] serial: ########, BoxID: ########, baseyear: 2004
2013/04/05 16:21:09 50E220 r V13 [internal] ready for requests
2013/04/05 16:21:09 50E220 r V13 [internal] found card system videoguard2
2013/04/05 16:21:09 50E220 r V13 [videoguard2] card detected
2013/04/05 16:21:09 50E220 r V13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2013/04/05 16:21:09 50E220 r V13 [videoguard2] tier: 2710, expiry date: 2012/10/12-01:01:00
2013/04/05 16:21:09 50E220 r V13 [videoguard2] tier: 2712, expiry date: 2012/12/18-00:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 0056, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 007b, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 007d, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 008e, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00bc, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00bd, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00be, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00c0, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00c7, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00c8, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00c9, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:14 50E220 r V13 [videoguard2] tier: 00f3, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:15 50E220 r V13 [videoguard2] tier: 00fa, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:15 50E220 r V13 [videoguard2] tier: 00ff, expiry date: 2013/07/28-01:01:00
2013/04/05 16:21:23 0 s init for all local cards done
2013/04/05 16:21:23 0 s anti cascading disabled
2013/04/05 16:21:24 51B750 c encrypted cccam-client 10.0.0.7 granted (user, au=off)
2013/04/05 16:21:24 519FA8 c anonymous disconnected from 10.0.0.7
2013/04/05 16:21:24 518800 c plain dvbapi-client granted (serverbox, au=on (1 reader))
2013/04/05 16:21:24 518800 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/04/05 16:21:29 51B750 c user (09C4&000000/0000/32C9/B3:52E11EE5E69E7C580DF29CA9173E4555): rejected group (13 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:21:38 51B750 c user (09C4&000000/0000/32C9/B3:0917888272BACA93A61670116CED088F): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:21:43 518800 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2013/04/05 16:21:43 518800 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2013/04/05 16:21:43 518800 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2013/04/05 16:21:43 518800 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2013/04/05 16:21:43 518800 c Found 4 ECMpids and 3 STREAMpids in PMT
2013/04/05 16:21:43 518800 c New program number: 006C () [pmt_list_management 3]
2013/04/05 16:21:44 518800 c Start descrambling PID #1 (CAID: 09C4) 1
2013/04/05 16:21:44 518800 c serverbox (09C4&000000/0000/006C/B3:6E5BA264FB21112FCF7D67B4842BFA3C): found (467 ms) by V13 -
2013/04/05 16:21:45 518800 c serverbox (09C4&000000/0000/006C/B3:AB306BC41E9923BE80F71F7270AAEEFF): found (440 ms) by V13 -
2013/04/05 16:21:50 51B750 c user (09C4&000000/0000/32C9/B3:89C2C9ECED6C2A7D32856E48E853E162): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:21:50 50E220 r V13 [videoguard2] serverbox emmtype=global, len=29, idx=0, cnt=1: written (62 ms)
2013/04/05 16:21:51 50E220 r V13 [videoguard2] serverbox emmtype=global, len=39, idx=1, cnt=1: written (67 ms)
2013/04/05 16:21:52 518800 c serverbox (09C4&000000/0000/006C/B3:057B792A644C42F8D33F9474E834BE8F): found (426 ms) by V13 -
2013/04/05 16:21:59 51B750 c user (09C4&000000/0000/32C9/B3:8D59C65C519CFF0855E182B3A047DE79): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:21:59 518800 c serverbox (09C4&000000/0000/006C/B3:FE2F3D3888502465D8708AFCE3617D67): found (425 ms) by V13 -
2013/04/05 16:22:02 50E220 r V13 [videoguard2] serverbox emmtype=global, len=32, idx=2, cnt=1: written (53 ms)
2013/04/05 16:22:06 518800 c serverbox (09C4&000000/0000/006C/B3:AF3BF94B51264CCFC335E908398F6189): found (422 ms) by V13 -
2013/04/05 16:22:10 51B750 c user (09C4&000000/0000/32C9/B3:345C4F6500A62F92B89781FA0FB0D873): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:22:12 50E220 r V13 [videoguard2] serverbox emmtype=global, len=151, idx=3, cnt=1: written (207 ms)
2013/04/05 16:22:13 50E220 r V13 [videoguard2] serverbox emmtype=global, len=46, idx=4, cnt=1: written (75 ms)
2013/04/05 16:22:13 518800 c serverbox (09C4&000000/0000/006C/B3:618EAE88EADA1E34CAC16E74C7742243): found (422 ms) by V13 -
2013/04/05 16:22:19 51B750 c user (09C4&000000/0000/32C9/B3:E406BDCF429995A79615281557E8CAE2): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:22:20 518800 c serverbox (09C4&000000/0000/006C/B3:0208DEC3CC0B1694F2E1CFB0B725BAF7): found (425 ms) by V13 -
2013/04/05 16:22:25 518800 c [ADD PID 0] CAID: 0D05 ECM_PID: 00DC PROVID: 000000
2013/04/05 16:22:25 518800 c [ADD PID 1] CAID: 0D95 ECM_PID: 010E PROVID: 000000
2013/04/05 16:22:25 518800 c [ADD PID 2] CAID: 0648 ECM_PID: 0078 PROVID: 000000
2013/04/05 16:22:25 518800 c [ADD PID 3] CAID: 1702 ECM_PID: 0140 PROVID: 000000
2013/04/05 16:22:25 518800 c [ADD PID 4] CAID: 1833 ECM_PID: 01A4 PROVID: 000000
2013/04/05 16:22:25 518800 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2013/04/05 16:22:25 518800 c [ADD PID 6] CAID: 098C ECM_PID: 01EA PROVID: 000000
2013/04/05 16:22:25 518800 c Found 7 ECMpids and 5 STREAMpids in PMT
2013/04/05 16:22:25 518800 c New program number: 132F () [pmt_list_management 3]
2013/04/05 16:22:25 518800 c ERROR: Can't decode channel
2013/04/05 16:22:30 51B750 c user (09C4&000000/0000/32C9/B3:0F9AF3F23D043B26C073088015C69D0F): rejected group (1 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:22:32 518800 c [ADD PID 0] CAID: 0D05 ECM_PID: 00C9 PROVID: 000000
2013/04/05 16:22:32 518800 c [ADD PID 1] CAID: 0D95 ECM_PID: 00FB PROVID: 000000
2013/04/05 16:22:32 518800 c [ADD PID 2] CAID: 0648 ECM_PID: 0065 PROVID: 000000
2013/04/05 16:22:32 518800 c [ADD PID 3] CAID: 1702 ECM_PID: 012D PROVID: 000000
2013/04/05 16:22:32 518800 c [ADD PID 4] CAID: 1833 ECM_PID: 0191 PROVID: 000000
2013/04/05 16:22:32 518800 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E1 PROVID: 000000
2013/04/05 16:22:32 518800 c [ADD PID 6] CAID: 098C ECM_PID: 01EB PROVID: 000000
2013/04/05 16:22:32 518800 c Found 7 ECMpids and 5 STREAMpids in PMT
2013/04/05 16:22:32 518800 c New program number: 32C9 () [pmt_list_management 3]
2013/04/05 16:22:32 518800 c ERROR: Can't decode channel
2013/04/05 16:22:39 51B750 c user (09C4&000000/0000/32C9/B3CC45853A35EAB88940B49BDA8937CF2): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:22:49 51B750 c user (09C4&000000/0000/32C9/B3:EA3F67EAE7BD51F7A50F50BB171FD6DE): rejected group (1 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:22:57 51B750 c user (09C4&000000/0000/32C9/B3:37355A97E1F8267DF7679A7232E2C8A4): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:23:08 51B750 c user (09C4&000000/0000/32C9/B3:B7B527F80D5DD5C2ED337A43F9B0213E): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:23:17 51B750 c user (09C4&000000/0000/32C9/B3:5010215CC2F275735C919BDD961616E5): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:23:28 51B750 c user (09C4&000000/0000/32C9/B3:605FF1BB3CEF7CD105F39D65562EAF60): rejected group (0 ms) (0/0/0/0) - (no matching reader)
2013/04/05 16:23:33 51B750 c user (09C4&000000/0000/002A/B3:ABFCFA802A432E9D5AE3B00D43184BAD): found (424 ms) by V13 -
2013/04/05 16:23:34 51B750 c user (09C4&000000/0000/002A/B3:F27B670E060BDC23D292C535355D6903): found (423 ms) by V13 -
2013/04/05 16:23:41 51B750 c user (09C4&000000/0000/002A/B3:E04BDC33E364285563C1DA94D86CEE27): found (423 ms) by V13 -
2013/04/05 16:23:48 51B750 c user (09C4&000000/0000/002A/B3:F952F7638F939C9D0C2192677637A579): found (423 ms) by V13 -
2013/04/05 16:23:55 51B750 c user (09C4&000000/0000/002A/B3:33236476D3554D06CA96DE1E5EF21D04): found (423 ms) by V13 -
2013/04/05 16:24:02 51B750 c user (09C4&000000/0000/002A/B3:6700CF450FBAF20063F974BDEEDC2F71): found (423 ms) by V13 -
2013/04/05 16:24:09 51B750 c user (09C4&000000/0000/002A/B3:54A3D85CE0625D3D9A3E08A6EAD9ECFC): found (423 ms) by V13 -
2013/04/05 16:24:16 51B750 c user (09C4&000000/0000/002A/B3:CCE6D7E9C463CF4909CD002862D77333): found (422 ms) by V13 -
2013/04/05 16:24:23 51B750 c user (09C4&000000/0000/002A/B3:BEA8EF6397E2532C22990180A46163ED): found (424 ms) by V13 -
2013/04/05 16:24:30 51B750 c user (09C4&000000/0000/002A/B3:B8565A8B097F3EAC5ED5E8C7C2F791D5): found (424 ms) by V13 -
2013/04/05 16:24:37 51B750 c user (09C4&000000/0000/002A/B3:ED007F62AECA0ABEE447C4C19765CAFF): found (423 ms) by V13 -
2013/04/05 16:24:44 51B750 c user (09C4&000000/0000/002A/B3:A02C036CB51A4D1FE785BD5E0A002456): found (423 ms) by V13 -
2013/04/05 16:24:51 51B750 c user (09C4&000000/0000/002A/B3:A6A20B0241E04DED907BB9FCEB362791): found (423 ms) by V13 -
2013/04/05 16:24:58 51B750 c user (09C4&000000/0000/002A/B3:EE4D2AF8593272454D0679F4170728DD): found (426 ms) by V13 -
2013/04/05 16:25:05 51B750 c user (09C4&000000/0000/002A/B3:B7C6EA491C774668CF49B17839493576): found (423 ms) by V13 -
2013/04/05 16:25:12 51B750 c user (09C4&000000/0000/002A/B3:FD4D08A0F17224E7E1EE45EC2259E63D): found (424 ms) by V13 -

soweit ich verstehe ist der fehler das 32C9, wie bring ich das jetzt rein? Genügt es, wenn ich das einfach bei srvid im reader reinschreibe? möchte jetzt echt nix mehr verpfuschen.

Lg

OK Leute, habs jetzt endlich hinbekommen. Vielen dank, es funktioniert alles, und hab auch vieles von euch gelernt.

Lg