OSCAM und HD+ aber womit AU?

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Wie bekomm ich das denn hin, dass ich nicht
alle 2 Monate zum Saturn laufen muss um dort
die Karte aktivieren zu lassen?

Mache das ganze über ne 7270 mit oscam, cccam
und mgcamd client (ufs922)

 

[czutok]

AW: OSCAM und HD+ aber womit AU?

ich weis nicht wie deine einstalungen in oscam ausehen , aber ergend wo must du ein fehler haben

meine HD+ karte rent seit Dezember in 7270 mit smargo einwand frei und ich muste die noch nicht ein mal ergend wo aktualisiren

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Dann hast Du wohl eine der ersten Karten bekommen
die schon aktiviert waren.

Meine Karte musste ich das erstemal beim Saturn
aktivieren lassen.

 

[blah0815]

AW: OSCAM und HD+ aber womit AU?

Welche Clients hast denn zur Auswahl?

blah

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Nur die UFS922

Habs erst über die Incubuscam versucht und bin dann auf die
Mgcamd umgestiegen.

 

[blah0815]

AW: OSCAM und HD+ aber womit AU?

Du könntest es mit camd3 über newcamd auf oscam versuchen, oder camd3 "direkt" auf oscam.
Müßte aber Deine Konfig sehen, um mehr zu sagen.

blah

 

[czutok]

AW: OSCAM und HD+ aber womit AU?

@obiwande

ich muste meine karte mit scam in der dream aktiviren , hat zirka 5 minuten gedauert und funktioniert jetzt seit Dezember in friz 7270 mit oscam

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Danke erstmal für die Hilfe

Anbei meine Config Dateien

CCcam.cfg:

### CLIENTS die zu dieser CCcam Connecten
F: xxxx xxxx 1 1 1
### SERVER
# C: xxx.dyndns.org port name pass
SERVER LISTEN PORT : 12000
ALLOW WEBINFO: yes
SHOW EXTENEDED CLIENT INFO : yes
WEBINFO LISTEN PORT : 16001
WEBINFO USERNAME : xxxx
WEBINFO PASSWORD : xxxx
Minimum Downhops: 1
Softkey File : /var/media/ftp/uStor01/cs/cccam/Softcam.Key
Autoroll File : /var/media/ftp/uStor01/cs/cccam/Autoroll.Key
Static Cw File : /var/media/ftp/uStor01/cs/cccam/Constant.Cw
Caid Prio File : /var/media/ftp/uStor01/cs/cccam/Cccam.Prio
Providerinfo File : /var/media/ftp/uStor01/cs/cccam/Cccam.Providers
Channelinfo File : /var/media/ftp/uStor01/cs/cccam/Cccam.Channelinfo
# z.b. connect zu oscam
N: 127.0.0.1 34000 xxxx xxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
# N: 127.0.0.1 34002 xxxx xxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
# N: 127.0.0.1 34004 xxxx xxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

oscam.conf:

[global]
disablelog = 0
LogFile = /var/media/ftp/uStor01/cs/oscam/oscam.log
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10240
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 3
appendchaninfo = 1

oscam.server:

[reader]
label = HDplus
Protocol = mouse
smargopatch = 1
detect = CD
device = /dev/ttyUSB0
group = 1
emmcache = 1,3,2
n3_rsakey= BF........D5
n3_boxkey = A7.........7C
CAID = 1830
#cardmhz = 368
IDENT = 1830:000000,3411,8011

oscam.user:

[account]
user = xxxx
pwd = xxxx
disabled = 0
expdate =
group = 1
hostname =
uniq = 1
sleep = 0
monlevel = 1
au = 1
services =
caid = 09C4&FFFF,1830&FFFF,1833&FFFF,1702&FFFF
betatunnel = 1833.FFFF:1702
ident =
keepalive = 0
numusers = 0
penalty = 0

mfg
Obiwande

 

[czutok]

AW: OSCAM und HD+ aber womit AU?

bei mir so

cfg.
#
# main configuration
#

[global]
nice = -1
WaitForCards = 1
ClientTimeout = 5
LogFile = /var/media/ftp/uStor01/cs/oscam/oscam.log
Level = 15
CacheDelay = 120

[monitor]
httpport = 83
httpuser = user
httppwd = pass
httprefresh = 15

# protocols
#[camd35]
#Port = 3333

[newcamd]
key = 0102030405060708091011121314
port = 34000@1830:003411

user
[account]
user = user
pwd = pass
group = 1
au = HDplus
CAID = 1830

server
[reader]
label = HDplus
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
group = 1
emmcache = 1,3,2
n3_rsakey = B..5
n3_boxkey = A...C

 

[blah0815]

AW: OSCAM und HD+ aber womit AU?

@obi: Die oscam.conf ist unvollständig....

Probier mal camd3 auf der Kathi. Dann die Datei camd3.config so anpassen:

Du musst dich Anmelden oder Registrieren um den Inhalt der Codes zu sehen!

Leg dafür am besten einen neuen USer zum testen in oscam an.
oscam Log posten, wenns nicht geht

blah

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Hatte nur die auskommentierten Zeilen weggelassen.

oscam.conf:

[global]
disablelog = 0
LogFile = /var/media/ftp/uStor01/cs/oscam/oscam.log
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 10240
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 3
appendchaninfo = 1

[newcamd]
port = 34000@1830:003411;34002@1702:000000
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255
keepalive = 0
mgclient = 0

#[cs357x]
#port = 22117
#suppresscmd08 = 1

#[cccam]
#port = 12000
#reshare = 5
#version = 2.1.1
#build = 2971

[webif]
httpport = 83
httpuser =
httppwd =
httpcss = /var/media/ftp/uStor01/cs/oscam//bluestyle.css
httptpl =
httpscript =
httprefresh = 120
httpallowed = 192.168.0.0-192.168.255.255
httpdyndns =
httphideidleclients = 1
httpreadonly = 0

#[anticasc]
#enabled = 0
#numusers = 0
#sampletime = 2
#samples = 10
#penalty = 0
#aclogfile = ./oscam_ac.log
#denysamples = 8
#fakedelay = 1000

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Danke,

werde es nachher mal probieren

Obiwande

 

[czutok]

AW: OSCAM und HD+ aber womit AU?

mach mal copy paste von meinen cfg. und es wird funzen

das einziger was du endern must ist user und pass und der box und rsa nr.

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Das funtzt so leider nicht. Hab mal 2 Stellen Rot markiert

2010/05/10 15:16:07 4439 s monitor: initialized (fd=8, port=988)
2010/05/10 15:16:07 4439 s camd 3.3x: disabled
2010/05/10 15:16:07 4439 s camd 3.5x: disabled
2010/05/10 15:16:07 4439 s cs378x: disabled
2010/05/10 15:16:07 4439 s newcamd: initialized (fd=9, port=34000, crypted)
2010/05/10 15:16:07 4439 s CAID: 1830
2010/05/10 15:16:07 4439 s provid #0: 003411
2010/05/10 15:16:07 4439 s newcamd: initialized (fd=10, port=34002, crypted)
2010/05/10 15:16:07 4439 s CAID: 1702
2010/05/10 15:16:07 4439 s provid #0: 000000
2010/05/10 15:16:07 4439 s cccam: disabled
2010/05/10 15:16:07 4439 s radegast: disabled
2010/05/10 15:16:07 4439 s logger started (pid=4440)
2010/05/10 15:16:07 4439 s resolver thread started
2010/05/10 15:16:07 4439 s http started (pid=4443)
2010/05/10 15:16:07 4439 s reader started (pid=4444, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/05/10 15:16:07 4439 s waiting for local card init
2010/05/10 15:16:07 4443 h HTTP Server listening on port 83
2010/05/10 15:16:09 4444 r02 card detected
2010/05/10 15:16:17 4444 r02 ATR:
2010/05/10 15:16:19 4444 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/05/10 15:16:21 4444 r02 detect native NAGRA card T1 protocol
2010/05/10 15:16:33 4444 r02 card system not supported
2010/05/10 15:16:33 4444 r02 Normal mode failed, reverting to Deprecated Mode
2010/05/10 15:16:40 4444 r02 ATR:
2010/05/10 15:16:41 4444 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.
2010/05/10 15:16:57 4444 r02 card system not supported
2010/05/10 15:16:57 4444 r02 card initializing error
2010/05/10 15:16:57 4439 s init for all local cards done
2010/05/10 15:16:57 4439 s anti cascading disabled
2010/05/10 15:16:57 4439 s dvbapi disabled
2010/05/10 15:16:57 4439 s client(1) connect from 127.0.0.1 (pid=4445, pipfd=17)
2010/05/10 15:16:57 4439 s client(2) connect from 127.0.0.1 (pid=4446, pipfd=18)
2010/05/10 15:16:57 4439 s client(3) connect from 127.0.0.1 (pid=4447, pipfd=19)
2010/05/10 15:16:57 4445 c01 Connection closed to client
2010/05/10 15:16:57 4446 c02 Connection closed to client
2010/05/10 15:16:57 4447 c03 Connection closed to client
2010/05/10 15:16:58 4439 s client(1) connect from 127.0.0.1 (pid=4448, pipfd=17)
2010/05/10 15:16:58 4448 c01 encrypted newcamd:34000-client 127.0.0.1 granted (kathie, au=hdplus)
2010/05/10 15:16:58 4448 c01 user kathie authenticated successfully (using client 4343)
2010/05/10 15:16:58 4448 c01 AU wont be used on this port -> disable AU
2010/05/10 15:16:59 4448 c01 kathie (1830&003411/EF10/92:0877): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:02 4448 c01 kathie (1830&003411/EF10/92:B08B): rejected user ident (129 ms) - RTL HD
2010/05/10 15:17:10 4448 c01 kathie (1830&003411/EF10/92:36E9): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:16 4448 c01 kathie (1830&003411/EF10/92:89FB): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:23 4448 c01 kathie (1830&003411/EF10/92:2630): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:31 4448 c01 kathie (1830&003411/EF10/92:6F36): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:37 4448 c01 kathie (1830&003411/EF10/92ED8): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:44 4448 c01 kathie (1830&003411/EF10/92373): rejected user ident (127 ms) - RTL HD
2010/05/10 15:17:52 4448 c01 kathie (1830&003411/EF10/92:7255): rejected user ident (128 ms) - RTL HD
2010/05/10 15:17:58 4448 c01 kathie (1830&003411/EF10/92:17FF): rejected user ident (128 ms) - RTL HD
2010/05/10 15:18:05 4448 c01 kathie (1830&003411/EF10/92:9E87): rejected user ident (128 ms) - RTL HD
2010/05/10 15:18:13 4448 c01 kathie (1830&003411/EF10/92:9FD0): rejected user ident (128 ms) - RTL HD

 

[obiwande]

AW: OSCAM und HD+ aber womit AU?

Ich benötige auf jedenfall den smargopatch = 1

2010/05/10 15:23:41 4491 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/05/10 15:23:42 4491 r02 detect native NAGRA card T1 protocol
2010/05/10 15:23:43 4491 r02 -----------------------------------------
2010/05/10 15:23:43 4491 r02 |id |tier |valid from |valid to |
2010/05/10 15:23:43 4491 r02 +----+--------+------------+------------+
2010/05/10 15:23:43 4491 r02 |8011|0064 |2010/02/26 |2011/02/27 |
2010/05/10 15:23:43 4491 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2010/05/10 15:23:43 4491 r02 -----------------------------------------
2010/05/10 15:23:44 4491 r02 WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2010/05/10 15:23:44 4491 r02 ROM: D N A S P 1 4 2
2010/05/10 15:23:44 4491 r02 REV: R e v G C 4
2010/05/10 15:23:44 4491 r02 SER:
2010/05/10 15:23:44 4491 r02 CAID: 1830
2010/05/10 15:23:44 4491 r02 Prv.ID: 00 00 34 11 (sysid)
2010/05/10 15:23:44 4491 r02 Prv.ID: 00 00 00 00
2010/05/10 15:23:44 4491 r02 Prv.ID: 00 00 80 11
2010/05/10 15:23:44 4491 r02 [nagra-reader] ready for requests
2010/05/10 15:23:44 4486 s init for all local cards done
2010/05/10 15:23:44 4486 s anti cascading disabled
2010/05/10 15:23:44 4486 s dvbapi disabled
2010/05/10 15:23:44 4486 s client(1) connect from 127.0.0.1 (pid=4492, pipfd=17)
2010/05/10 15:23:44 4492 c01 Connection closed to client
2010/05/10 15:23:50 4486 s client(1) connect from 127.0.0.1 (pid=4493, pipfd=17)
2010/05/10 15:23:50 4493 c01 encrypted newcamd:34000-client 127.0.0.1 granted (kathie, au(auto)=hdplus)
2010/05/10 15:23:50 4493 c01 user kathie authenticated successfully (using client 4343)
2010/05/10 15:23:50 4493 c01 AU enabled for user kathie on reader hdplus