nokia box 2 rep

[opel-doc]

AW: nokia box 2 rep

alles schon gemacht aber nichts funzt

also mal schauen wegen nem tuner

 

[Nasher]

AW: nokia box 2 rep

kostet wirklich net viel......hab den für 9 euronen gesehen. kannst dich ja nochmal melden, wenn du die aktion hinter dir hast.

 

[opel-doc]

AW: nokia box 2 rep

so habe nun mal den bfg94 getauscht aber nichts bin aber der meinung das das bild bei ausgeschalteter box besser ist als vorher

 

[Nasher]

AW: nokia box 2 rep

poste mal bitte einen flashlog.
fallst du nicht weißt wie, kannst du es hier nachlesen.
https://www.digital-eliteboard.com/threads/16247

 

[blauerengel]

AW: nokia box 2 rep

Hallo,

versuch es bei Bastian Rehberg (

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

).
Ich habe mehrere verschiedene sachen reparieren lassen.

Einfach preiswert und gut!:1:

 

[opel-doc]

AW: nokia box 2 rep

so Link veralten (gelöscht) hoffe es ist so richtig

 

[Nasher]

AW: nokia box 2 rep

nein, das war nicht ganz richtig.
das flashlog ist das logfile vom flashassistenten.
ist ja nur ein text.

der muß so aussehen

ëdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 1 debug: 1 debug:
debug: Got BOOTP reply from Server IP 192.168.1.1, My IP 192.168.1.35
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug: Sending TFTP-request for file c0a80123
debug:
TFTP failed, giving up...
boot net failed
boot: elfcopy failed: 16
dbox2:root>
-------------------------------------------------------------
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet
BootP: Request von 00509C126C1B erhalten
BootP: ARP-Eintrag mit IP: 192.168.1.202 und Mac: 00509C126C1B gesetzt
BootP: Antwort an 00509C126C1B gesendet

------ Zusatzinformationen ------
Gewählter Netzwerkadapter: NVIDIA nForce Networking Controller - Paketplaner-Miniport (0)
IP-Adresse des Netzwerkadapters: 192.168.1.33
IP-Adresse die die dbox bekommt: 192.168.1.202

kopiere mal bitte deinen und poste den dann mal hier.

 

[opel-doc]

AW: nokia box 2 rep

so

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-d6.d4.05.07.00.00-f1
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 162992
verify sig: 262
Branching to 0x40000

U-Boot 1.2.0 (Tuxbox) (May 12 2008 - 20:27:09)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found "console"
env: found "lcd_inverse"
env: found "lcd_contrast"
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 669222 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 669158 Bytes = 653.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.2-dbox2 (zebradem@Ubuntu) (gcc version 3.4.6) #1 Mo 12. Mai
20:27:50 CEST 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30828k available (1140k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:13:e9:c6
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x004c0000 : "root (squashfs)"
0x004c0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2008-05-12 20:32:30 CEST)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Nokia
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
/var/treiber/ves1820.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.2-dbox2
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
avia_gt_proc: Using config file '/var/tuxbox/config/avia.conf'.

avia_gt_proc: $Id: avia_gt_proc.c,v 0.92d 2003/06/18 19:00:00 bofh Exp $
avia_gt_proc: found - AVIA GTX
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
[CBasicClient] connect failed.
/tmp/sectionsd.sock: No such file or directory
$Id: sectionsd.cpp,v 1.260 2008/03/24 19:14:50 dbt Exp $
$Id: zapit.cpp,v 1.410 2008/04/25 21:23:23 houdini Exp $
[frontend] uncommitted_switch_mode 0
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Exteavia_gt_core: masking unhandled irq reg 0 bit 7
nded Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[eitThread] pid 126 start
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] format: 4:3(LB)
[camd] ca system id: 1722
tuxbox mgcamd v1.30a by mixvt (compiled May 14 2008 18:30:57)
[mg] Net:0:0:0:10s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:0 Log:2:1
72.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
Conax.Key error 2: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...neutrino: /lib/libpng12.so.0: no version informati
on available (required by neutrino)
[LCDFONT] adding font /share/fonts/micron.ttf...Keys readed
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
wget: cannot connect to remote host (127.0.0.1): Connection refused
Conax.Key error 2: No such file or directory
[yhttpd] Webserver starting...
[mgcam] emm thread started
[mgcamd] tps update started.
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[LCDFONT] FTC_Face_Requester (Micron/Bold)
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out

 

[Scrat]

AW: nokia box 2 rep

klaasischer fall von boot net failed .... !!!

das heist soviel wie das bei dir ein netzwerkproblem vorliegt

ergo kontrolliere bitte deine Netzwerkverbindungen ! und / oder schalte das Mediasensing ab

 

[opel-doc]

AW: nokia box 2 rep

dumme frage wo und wie achso und warum

 

[Nasher]

AW: nokia box 2 rep

wo: in der registrierung.
wie:
warum: es kann daran liegen, das dein betriebssystem probleme mit dem media-sensing hat...also besser deaktivieren.

so nochmal....

1. hallenberg installieren.
2. image besorgen.
3. du verbindest deine box mit einem crossover und einem nullmodemkabel.
4. du gibst deiner netzwerkkarte eine feste ip und stellst in der systemsteuerung auf 10 mbit hd ein.
5. mediasense patch bei xp(ich hoffe das ist dein system) ausführen.

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

6. im flashassistenten die netzwerkkarte wählen, dann das image wählen und flashen.

probier das mal aus

 

[opel-doc]

AW: nokia box 2 rep

habe vista

 

[bellof]

AW: nokia box 2 rep

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

machs genauso wie der kollege nasher es gesagt hat!
probiers mit dem neusten hallenberg!
das mit dem 10 mbit h(alf) d(uplex) kannst du dir unter vista sparen!
zumindest stellt sich das mein pc selbst ein!hab auch vista!!

 

[opel-doc]

AW: nokia box 2 rep

aber so hatte ich das vorher auch gemacht

üdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.10.1, My IP 192.168.10.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000

U-Boot 1.3.1 (Tuxbox - Hallenberg.com) (Dec 23 2007 - 22:22:21)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.10.1; our IP address is 192.168.10.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.10.1; our IP address is 192.168.10.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.10.1; our IP address is 192.168.10.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.10.1; our IP address is 192.168.10.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.10.1; our IP address is 192.168.10.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: #################################################################
##########################################################
done
Bytes transferred = 626108 (98dbc hex)
Using SCC ETHERNET device
TFTP from server 192.168.10.1; our IP address is 192.168.10.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: #################################################################
#################################################
done
Bytes transferred = 579075 (8d603 hex)
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626044 Bytes = 611.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 579011 Bytes = 565.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f21000, end 01fae5c3 ... OK
Linux version 2.4.36-dbox2 (Hallenberg.com) (gcc version 3.4.6) #2 So 6. Jan 18:22:41 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.10.202:192.168.10.1::::ff
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30356k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:13:e9:c6
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.10.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.10.202, domain=, nis-domain=(none),
bootserver=192.168.10.1, rootserver=192.168.10.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.9.0 (2008-01-05 13:28:28 CET)
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface









dbox2 - ImageFlashingAssistent 3.0
- Hallenberg.com -

Schreibe Backup: 8064k von 8064k (100%)
Lade Flashimage...
done.
Sende Backup...
Lösche Sektoren: 63 von 63 (100%)
Schreibe Daten: 8064k von 8064k (100%)
Verifziere Daten: 8064k von 8064k (100%)
Sie koennen die dbox jetzt ausschalten.
-------------------------------------------------------------
BootP: Request von 00509C13E9C6 erhalten
BootP: ARP-Eintrag mit IP: 192.168.10.202 und Mac: 00509C13E9C6 gesetzt
BootP: Antwort an 00509C13E9C6 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C13E9C6 erhalten
BootP: ARP-Eintrag mit IP: 192.168.10.202 und Mac: 00509C13E9C6 gesetzt
BootP: Antwort an 00509C13E9C6 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C13E9C6 erhalten
BootP: ARP-Eintrag mit IP: 192.168.10.202 und Mac: 00509C13E9C6 gesetzt
BootP: Antwort an 00509C13E9C6 gesendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files (x86)\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
TFTP: Sende D:\rsd\2x_cable_md_image_5.30_19072008\2x_cable_md_image_5.30_19072008.img
TFTP: Transfer erfolgreich beendet
TFTP: Schreibe Backup nach C:\Program Files (x86)\DBOX_IFA\Backups\2008-08-15 16-24-45_176.img
TFTP: Transfer erfolgreich beendet
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Fast-Ethernet-Netzwerkkarte für Realtek RTL8139/810x-Familie (0)
IP-Adresse des Netzwerkadapters: 192.168.10.1
IP-Adresse die die dbox bekommt: 192.168.10.202
Betriebssystem: Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
CPU 1: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ @ 1000 MHz
CPU 2: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ @ 1000 MHz
Dateiname des Images: 2x_cable_md_image_5.30_19072008.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.1
------ Powered by

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

------

 

[Nasher]

AW: nokia box 2 rep

und wo ist jetzt das problem??
dein netzwerkfehler ist schonmal weg. wenn du noch probleme hast, dann wähle mal ein anderes image. achte dabei auf 1xflash und 2xflash images.