Grüßt euch zusammen
Habe mal 2.Fragen,wäre nett von euch wenn ihr mir helfen könntet
Habe mir gestern ein MC eingebaut, so weit wie ich es sehe ist alles ok
Wenn die Karte drin ist brennt die Gelbe und Grüne LED = Clock3 = 3,686 MHz
Ist den das richtig, denn bei meinem exteren Mastercrd musste ich 357 mhz einstellen.
Könnte sich mal einer meine newcs.xml anschauen, da muss ein Fehler drin sein
Den ich kann meine karte nicht sehen, keine verschlüsselten gehen
Alle anderen Sender sind hell. <?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>CardReader</name>
<type>dbox</type>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>20000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>Multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>20000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.2.100</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<allow>lower</allow>
<allow>upper</allow>
</user>
</newcamdserver>
</newCSconfig>
Und das ist meine N-Linie in der CCcam.cfg
N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Wäre echt nett wenn mir einer helfen könnte von euch!
Gruß wiso46
Habe mal 2.Fragen,wäre nett von euch wenn ihr mir helfen könntet
Habe mir gestern ein MC eingebaut, so weit wie ich es sehe ist alles ok
Wenn die Karte drin ist brennt die Gelbe und Grüne LED = Clock3 = 3,686 MHz
Ist den das richtig, denn bei meinem exteren Mastercrd musste ich 357 mhz einstellen.
Könnte sich mal einer meine newcs.xml anschauen, da muss ein Fehler drin sein
Den ich kann meine karte nicht sehen, keine verschlüsselten gehen
Alle anderen Sender sind hell. <?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>CardReader</name>
<type>dbox</type>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>20000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
<device>
<name>Multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>20000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,udp,tcp</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.2.100</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<allow>lower</allow>
<allow>upper</allow>
</user>
</newcamdserver>
</newCSconfig>
Und das ist meine N-Linie in der CCcam.cfg
N: 127.0.0.1 20000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Wäre echt nett wenn mir einer helfen könnte von euch!
Gruß wiso46