Newcs NewCS 1.162

[Aligator]

Hallo,

ich habe den newcs unter Windows gestartet MasterCRD auf Mode0 an com3.
leider kommt nach dem connect durch die D-Box2 folgende Meldung:


Newcamd:15000 ] Connection from dummy to not-ready server!

Log und configfiles habe ich angehängt.

Kann mir jemand helfen ?

 

[Phantom]

AW: NewCS 1.162

Nehme mal meine Config

Du musst dich Anmelden oder Registrieren um diesen link zusehen!

Mit der Nagra und MasterCRD läuft es perfekt. Prüfe auch in der Systemsteuerung nach ob der MasterCRD auch wirklich an Com3 sitzt. Wenn es Com3 ist, so musst du diesen in der newcs.xml noch ändern.

 

[Aligator]

AW: NewCS 1.162

Hi,

auch mit deiner Datei kommt das gleiche Problem. Ist überigens eine Unity Media Original Karte. In der Box klappt die auch.

This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:48:56
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 20:37:31 ] [ Box detect ] Windows Vista Build 6001
[ 20:37:31 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to
NO
[ 20:37:31 ] [ Config ] Option <crypto-special> for device 0 (Phoenix Interface) not present, defaul
ting to NO
[ 20:37:31 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 20:37:31 ] [ Config ] COM3 ECM priority: round
[ 20:37:31 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:37:31 ] [ ECM Cache ] Initialising dynamic Cache
[ 20:37:31 ] [ Loader ] Starting Telnet on port 1001
[ 20:37:31 ] [ Loader ] Reader type 2 on node COM3
[ 20:37:31 ] [ Phoenix ] Opening device COM3
[ 20:37:31 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 20:37:31 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 20:37:31 ] [ Phoenix ] Setting baud to 16457
[ 20:37:33 ] [ Loader ] Unknown card
[ 20:37:33 ] [ Loader ] Trying Irdeto (T=14)
[ 20:37:33 ] [ Loader ] Reader type 2 on node COM3
[ 20:37:33 ] [ Phoenix ] Opening device COM3
[ 20:37:33 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 20:37:33 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 20:37:33 ] [ Phoenix ] Setting baud to 9600
[ 20:37:35 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 20:37:35 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 20:37:35 ] [ Loader ] Init Irdeto card
[ 20:37:35 ] [ Phoenix ] Setting parity to NONE on node COM3
[ 20:37:35 ] [ Phoenix ] Setting 2 Stop bits on node COM3
[ 20:37:35 ] [ Phoenix ] Setting baud to 9600
[ 20:37:36 ] [ Keyman ] Adding key 6146D type 0 on Provider 000000 for caid 1722 ID=0
[ 20:37:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000000 for caid 1722 ID=0
[ 20:37:36 ] [ Keyman ] Skipping duplicate irdeto
[ 20:37:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 1722 ID=1
[ 20:37:36 ] [ Keyman ] Skipping duplicate irdeto
[ 20:37:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 1722 ID=2
[ 20:37:36 ] [ Keyman ] Skipping duplicate irdeto
[ 20:37:36 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 1722 ID=3
[ 20:37:37 ] [ Loader ] Card 1722 on port COM3 failed
[ 20:37:37 ] [ Loader ] Starting Newcamd Server on port 15000
[ 20:37:37 ] [ Newcamd ] Newcamd thread Server started on port 15000
[ 20:37:42 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam
[ 20:37:42 ] [ Newcamd:15000 ] Connection from dummy to not-ready server!

 

[Phantom]

AW: NewCS 1.162

Normal sollte die Karte mit 6Mhz laufen aber stelle sie mal auf 357 in der Newcs.xml um.

 

[Aligator]

AW: NewCS 1.162

Hi,

klappt leider auch nicht.

This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:48:56
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 22:47:24 ] [ Box detect ] Windows Vista Build 6001
[ 22:47:24 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to
NO
[ 22:47:24 ] [ Config ] Option <crypto-special> for device 0 (Phoenix Interface) not present, defaul
ting to NO
[ 22:47:24 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 22:47:24 ] [ Config ] COM3 ECM priority: round
[ 22:47:24 ] [ EMM Cache ] Initialising dynamic Cache
[ 22:47:24 ] [ ECM Cache ] Initialising dynamic Cache
[ 22:47:24 ] [ Loader ] Starting Telnet on port 1001
[ 22:47:24 ] [ Loader ] Reader type 2 on node COM3
[ 22:47:24 ] [ Phoenix ] Opening device COM3
[ 22:47:24 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 22:47:24 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 22:47:24 ] [ Phoenix ] Setting baud to 9600
[ 22:47:26 ] [ ATR ] T=14 1etu=175.01us Guardtime:17etu WWT:9600etu
[ 22:47:26 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 22:47:26 ] [ Loader ] Init Irdeto card
[ 22:47:26 ] [ Phoenix ] Setting parity to NONE on node COM3
[ 22:47:26 ] [ Phoenix ] Setting 2 Stop bits on node COM3
[ 22:47:26 ] [ Phoenix ] Setting baud to 5760
[ 22:47:27 ] [ Loader ] Card 0600 on port COM3 failed
[ 22:47:27 ] [ Loader ] Starting Newcamd Server on port 15000
[ 22:47:27 ] [ Newcamd ] Newcamd thread Server started on port 15000
[ 22:47:31 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam
[ 22:47:31 ] [ Newcamd:15000 ] Connection from dummy to not-ready server!

 

[Phantom]

AW: NewCS 1.162

Ich hatte das selbe Phänomen beim bekannten mit meinen MasterCRD. Ändere mal bitte den Port in der Systemsteuerung auf COM1 und teste erneut. Stelle auch wieder auf 6Mhz um.