Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

LeinadR · 20. Februar 2013

Hallo liebe Gemeinde,

ich hab ein kleines Problem bei dem ich einfach nicht weiter komme, sicherlich ist es nur ein Config Problem, aber ich schaffe es nicht zu lösen.

Auf meinem Gerät ist OSCam (als Server) und cccam (als Client) installiert.
Bislang sehe ich aber nur die ÖR, die anderen Digital Sender, die mit CI+ Modul im TV funktionieren, bleiben auf der Box dunkel.
In meinen Logs sind einige Fehlermeldungen, allerdings fehlt mir das Wissen diese richtig zu deuten.
Wahrscheinlich hab ich auch durch mein ständiges Probieren inzwischen mehr kaputt gespielt.

Auf dem WebIF von OSCam sehe ich das der cccam user "localuser" auch verbunden ist...
Ich weiß nicht mehr weiter :-/

Hinweis zu den Logs, ich hab erst OSCam gestartet, dann cccam, dann auf ZDF (hell) und dann auf VOX (dunkel) zurück geschaltet.

Was ist hier falsch konfiguriert?
Mache ich was falsch oder hab ich gar das ganze Konzept nicht verstanden? :emoticon-0122-itwas

- Gigablue HD 800 se + openmips 2.0
- KD G09 Karte
- OSCAM 1.20-unstable_svn build #6636
- CCcam.cfg deutsch v2.3.0

oscam.conf

[global]
logfile = /var/volatile/log/oscam/oscam.log
disablelog = 0
maxlogsize = 20
nice = -1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
dropdups = 1
lb_mode = 1
lb_retrylimit = 1600
lb_reopen_mode = 1

[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255
hideclient_to = 15
monlevel = 4
appendchaninfo = 0

[cccam]
port = 12000
reshare = 3
version = 2.2.1
nodeid = 0A0B0C0D0E0F1215
reshare_mode = 0

#[dvbapi]
#enabled = 1
#au = 1
#boxtype = dreambox
#user = dvbapiau

[webif]
httpport = 16200
httpuser = user
httppwd = password
httprefresh = 20
httpallowed = 0.0.0.0-255.255.255.255

oscam.user

[account]
user = dvbapiau
pwd =
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
uniq = 3
monlevel = 0
au = 1

[account]
user = usermonitor
pwd = pasword
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,20,21
uniq = 1

[account]
user = localuser
pwd = hund
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
#hostname = 192.168.0.104
au = 1
cccmaxhops = 2
cccreshare = 1

oscam.server

[reader]
label = KDG09
protocol = internal
device = /dev/sci0
caid = 09C7
ident = 09C7:000000
boxid = 12345678
ecmwhitelist = 09C7:5D,5E,5F,60,61,62,63,78,79
# ecmwhitelist = 5D,5E,5F,60,61,62,63,64,77,78
# ecmwhitelist = 5D,5E,5F,60,61,62,63,78,79
detect = cd
# mhz = 357
# cardmhz = 357
group = 1
emmcache = 1,3,2

CCcam.cfg

C: 192.168.0.104 12000 localuser hund

OSCAM LOG

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Feb 20 13:25:34 2013
-------------------------------------------------------------------------------
2013/02/20 13:25:34 0 s starting thread log_list_thread
2013/02/20 13:25:34 0 s log_list_thread thread started
2013/02/20 13:25:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/02/20 13:25:34 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/02/20 13:25:34 0 s client max. idle=120 sec, debug level=0
2013/02/20 13:25:34 0 s max. logsize=20 Kb, loghistorysize=4096 bytes
2013/02/20 13:25:34 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/02/20 13:25:34 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/02/20 13:25:34 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2013/02/20 13:25:34 0 s signal handling initialized (type=sysv)
2013/02/20 13:25:34 0 s 194 service-id's loaded in 6ms
2013/02/20 13:25:34 0 s oscam.tiers loading failed
2013/02/20 13:25:34 0 s 14 provid's loaded
2013/02/20 13:25:34 0 s 0 lengths for caid guessing loaded
2013/02/20 13:25:34 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/02/20 13:25:34 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s monitor: initialized (fd=5, port=16500)
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s camd35: disabled
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s cs378x: disabled
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s newcamd: disabled
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s cccam: initialized (fd=6, port=12000, crypted)
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s pandora: disabled
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s csp: disabled
2013/02/20 13:25:34 0 s Starting listener 0
2013/02/20 13:25:34 0 s radegast: disabled
2013/02/20 13:25:34 0 s starting thread http
2013/02/20 13:25:34 0 s http thread started
2013/02/20 13:25:34 0 s starting thread reader check
2013/02/20 13:25:34 0 s reader check thread started
2013/02/20 13:25:34 0 s starting thread check
2013/02/20 13:25:34 0 s check thread started
2013/02/20 13:25:34 0 s creating thread for device /dev/sci0
2013/02/20 13:25:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/02/20 13:25:34 0 s waiting for local card init
2013/02/20 13:25:34 5806F0 r reader kdg09 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/02/20 13:25:34 58D810 h HTTP Server listening on port 16200
2013/02/20 13:25:35 5806F0 r kdg09 card detected
2013/02/20 13:25:38 5806F0 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/20 13:25:38 5806F0 r ATR: 78 F0 48 21 81 00
2013/02/20 13:25:38 5806F0 r ERROR: Could not read reader->convention
2013/02/20 13:25:38 5806F0 r Error activating card.
2013/02/20 13:25:40 5806F0 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/20 13:25:40 5806F0 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2013/02/20 13:25:41 5806F0 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/20 13:25:41 5806F0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] parental lock setting: FF FF FF FF
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] type: VideoGuard XXXXXXX G02/G09 (09C7), caid: 09C7
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] serial: XXXXXXXXXXXXX, BoxID: 12345678, baseyear: 20XX
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] ready for requests
2013/02/20 13:25:43 5806F0 r found cardsystem videoguard2
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] kdg09 card detected
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] type: VideoGuard XXXXXXX G02/G09 (09C7)
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] tier: 00f3, expiry date: 2013/05/18-00:00:00
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] tier: 00f4, expiry date: 2013/05/18-00:00:00
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] tier: 00fa, expiry date: 2013/05/18-00:00:00
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] tier: 00fe, expiry date: 2013/05/18-00:00:00
2013/02/20 13:25:43 5806F0 r [videoguard2-reader] tier: 012d, expiry date: 2013/05/18-00:00:00
2013/02/20 13:25:46 0 s init for all local cards done
2013/02/20 13:25:46 0 s anti cascading disabled
2013/02/20 13:26:14 5931D8 c encrypted cccam-client 192.168.0.104 granted (localuser, au=auto (1 reader))
2013/02/20 13:26:27 5931D8 c starting thread housekeeping lb stats
2013/02/20 13:26:27 5931D8 c housekeeping lb stats thread started
2013/02/20 13:26:27 5931D8 c localuser (09C7&000000/0000/D164/78:436D): found (315 ms) by kdg09
2013/02/20 13:26:35 5931D8 c localuser (09C7&000000/0000/D164/78:8BA2): found (312 ms) by kdg09
2013/02/20 13:26:49 5931D8 c localuser (09C7&000000/0000/D164/78:6225): found (313 ms) by kdg09
2013/02/20 13:26:55 5931D8 c localuser (09C7&000000/0000/D164/78:4FFB): found (313 ms) by kdg09
2013/02/20 13:27:05 5931D8 c localuser (09C7&000000/0000/D164/78:BD1A): found (313 ms) by kdg09
2013/02/20 13:27:15 5931D8 c localuser (09C7&000000/0000/D164/78:1B32): found (312 ms) by kdg09
2013/02/20 13:27:25 5931D8 c localuser (09C7&000000/0000/D164/78:A754): found (313 ms) by kdg09
2013/02/20 13:27:26 5931D8 c cccam(s) localuser: connection closed by client, n=-1.
2013/02/20 13:27:26 5931D8 c localuser disconnected from 192.168.0.104
2013/02/20 13:27:26 5931D8 c thread 7153F4B0 ended!

CCCAM LOG

13:26:00.560 CCcam: ======================================================================
13:26:00.563 CCcam: starting CCcam 2.3.0 compiled on Dec 15 2011@23:38:08
13:26:00.564 CCcam: ======================================================================
13:26:00.564 CCcam: online using nodeId f4af7a9b4033b6e4
13:26:00.580 CCcam: dvb api3 detected
13:26:00.585 CCcam: DM8000 detected
13:26:00.586 CCcam: create 8 cam device(s)
13:26:11.414 CCcam: drecrypt card found
13:26:14.303 CCcam: card init fail
13:26:14.635 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
13:26:14.638 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
13:26:14.638 CCcam: static cw not found or bad
13:26:14.641 CCcam: parsed 0 entries from /var/etc/CCcam.prio
13:26:14.728 CCcam: added 1274 provider names from /var/etc/CCcam.providers
13:26:14.730 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
13:26:14.731 CCcam: server started on port 12000
13:26:14.804 CCcam: found nagra caid: 0x1801 ecmpid: 0x6aa id: 0x0
13:26:14.805 CCcam: found betacrypt caid: 0x1722 ecmpid: 0x6ab id: 0x0
13:26:14.805 CCcam: found nagra caid: 0x1834 ecmpid: 0x6ac id: 0x0
13:26:14.806 CCcam: found nagra caid: 0x1861 ecmpid: 0x6a9 id: 0x0
13:26:14.807 CCcam: found nds caid: 0x9c7 ecmpid: 0x6ad id: 0x0
13:26:14.807 CCcam: cam[0] set PMT for sid=d164
13:26:14.809 CCcam: start EMM
13:26:14.906 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 1101) no key
13:26:14.906 CCcam: cam[0] ecm odd nok caid:0x1801 id:0x0 pid:0x6aa Nagravision CAID/Nagra3[NewCS]
13:26:15.001 CCcam: EMM demux 1 set
13:26:15.001 CCcam: EMM: not interested in 09C7:000000
13:26:15.003 CCcam: EMM: not interested in 1834:000000
13:26:15.005 CCcam: EMM: start filter on betacrypt emmpid: 0x1500 caid: 0x1722 id: 0x0
13:26:15.005 CCcam: EMM: not interested in 1801:000000
13:26:15.005 CCcam: EMM: not interested in 1861:000000
13:26:15.110 CCcam: chid 0001
13:26:15.110 CCcam: cam[0] ecm odd nok caid:0x1722 id:0x0 pid:0x6ab XXXXXXX (23E)[tunneled Nagra]
13:26:15.209 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:15.209 CCcam: cam[0] ecm odd nok caid:0x1834 id:0x0 pid:0x6ac XXXXXXX (23E)
13:26:15.273 CCcam: nds card found(new type)
13:26:15.309 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:15.309 CCcam: cam[0] ecm odd nok caid:0x1861 id:0x0 pid:0x6a9 Unknown
13:26:15.405 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 1101) no key
13:26:15.405 CCcam: cam[0] ecm odd nok caid:0x1801 id:0x0 pid:0x6aa Nagravision CAID/Nagra3[NewCS]
13:26:15.601 CCcam: nds: using boxkey 00000000
13:26:15.609 CCcam: chid 0001
13:26:15.609 CCcam: cam[0] ecm odd nok caid:0x1722 id:0x0 pid:0x6ab XXXXXXX (23E)[tunneled Nagra]
13:26:15.709 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:15.709 CCcam: cam[0] ecm odd nok caid:0x1834 id:0x0 pid:0x6ac XXXXXXX (23E)
13:26:15.809 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:15.809 CCcam: cam[0] ecm odd nok caid:0x1861 id:0x0 pid:0x6a9 Unknown
13:26:15.905 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 1101) no key
13:26:15.905 CCcam: cam[0] ecm odd nok caid:0x1801 id:0x0 pid:0x6aa Nagravision CAID/Nagra3[NewCS]
13:26:16.008 CCcam: chid 0001
13:26:16.008 CCcam: cam[0] ecm odd nok caid:0x1722 id:0x0 pid:0x6ab XXXXXXX (23E)[tunneled Nagra]
13:26:16.012 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:16.013 CCcam: cam[0] ecm even nok caid:0x1834 id:0x0 pid:0x6ac XXXXXXX (23E)
13:26:16.114 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
13:26:16.114 CCcam: cam[0] ecm even nok caid:0x1861 id:0x0 pid:0x6a9 Unknown
13:26:16.185 CCcam: card added to broker with caid 9c7
13:26:16.186 CCcam: start EMM
13:26:16.201 CCcam: EMM demux 1 set
13:26:16.203 CCcam: EMM: start filter on nds emmpid: 0x1509 caid: 0x9c7 id: 0x0
13:26:16.203 CCcam: EMM: not interested in 1834:000000
13:26:16.205 CCcam: EMM: start filter on betacrypt emmpid: 0x1500 caid: 0x1722 id: 0x0
13:26:16.205 CCcam: EMM: not interested in 1801:000000
13:26:16.206 CCcam: EMM: not interested in 1861:000000
13:26:26.246 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 1101) no key
13:26:26.246 CCcam: cam[0] ecm odd nok caid:0x1801 id:0x0 pid:0x6aa Nagravision CAID/Nagra3[NewCS]
13:26:26.446 CCcam: chid 0001
13:26:26.447 CCcam: cam[0] ecm odd nok caid:0x1722 id:0x0 pid:0x6ab XXXXXXX (23E)[tunneled Nagra]
13:26:26.548 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:26.548 CCcam: cam[0] ecm odd nok caid:0x1834 id:0x0 pid:0x6ac XXXXXXX (23E)
13:26:26.648 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:26:26.648 CCcam: cam[0] ecm odd nok caid:0x1861 id:0x0 pid:0x6a9 Unknown
13:26:26.713 CCcam: local ecm -> card /dev/sci0 0x9c7(0x000) sid 0xd164
13:26:27.031 CCcam: local ecm <- card /dev/sci0 error
13:26:27.032 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:26:27.348 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:26:27.351 CCcam: cam[0] ecm even ok caid:0x9c7 id:0x0 pid:0x6ad Unknown
13:26:35.044 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:26:35.358 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:26:35.362 CCcam: cam[0] ecm odd ok caid:0x9c7 id:0x0 pid:0x6ad Unknown
13:26:40.569 CCcam: cam[0] set PMT for sid=6d66
13:26:40.571 CCcam: start EMM
13:26:40.702 CCcam: EMM demux 1 set
13:26:40.703 CCcam: EMM: not interested in 1801:000000
13:26:40.703 CCcam: EMM: not interested in 1834:000000
13:26:40.704 CCcam: EMM: not interested in 1861:000000
13:26:40.706 CCcam: EMM: start filter on nds emmpid: 0x1509 caid: 0x9c7 id: 0x0
13:26:48.858 CCcam: found nagra caid: 0x1801 ecmpid: 0x6aa id: 0x0
13:26:48.858 CCcam: found betacrypt caid: 0x1722 ecmpid: 0x6ab id: 0x0
13:26:48.859 CCcam: found nagra caid: 0x1834 ecmpid: 0x6ac id: 0x0
13:26:48.859 CCcam: found nagra caid: 0x1861 ecmpid: 0x6a9 id: 0x0
13:26:48.860 CCcam: found nds caid: 0x9c7 ecmpid: 0x6ad id: 0x0
13:26:48.860 CCcam: cam[0] set PMT for sid=d164
13:26:48.861 CCcam: start EMM
13:26:48.948 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:26:49.001 CCcam: EMM demux 1 set
13:26:49.004 CCcam: EMM: start filter on nds emmpid: 0x1509 caid: 0x9c7 id: 0x0
13:26:49.004 CCcam: EMM: not interested in 1834:000000
13:26:49.007 CCcam: EMM: start filter on betacrypt emmpid: 0x1500 caid: 0x1722 id: 0x0
13:26:49.007 CCcam: EMM: not interested in 1801:000000
13:26:49.008 CCcam: EMM: not interested in 1861:000000
13:26:49.263 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:26:49.268 CCcam: cam[0] ecm even ok caid:0x9c7 id:0x0 pid:0x6ad Unknown
13:26:55.045 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:26:55.360 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:26:55.364 CCcam: cam[0] ecm odd ok caid:0x9c7 id:0x0 pid:0x6ad Unknown
13:27:05.212 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:27:05.526 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:27:05.530 CCcam: cam[0] ecm even ok caid:0x9c7 id:0x0 pid:0x6ad Unknown
13:27:15.213 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:27:15.527 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:27:15.530 CCcam: cam[0] ecm odd ok caid:0x9c7 id:0x0 pid:0x6ad Unknown
13:27:25.212 CCcam: remote ecm -> 192.168.0.104:12000 0x9c7(0x000)
13:27:25.527 CCcam: remote ecm <- 192.168.0.104:12000 ok
13:27:25.531 CCcam: cam[0] ecm even ok caid:0x9c7 id:0x0 pid:0x6ad Unknown

bombadil · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Hi,

du kannst zwei Wege gehen. Entweder den Weg Oscam => CCcam, dann musst du mit dem Protokoll Newcamd Oscam und CCCam verbinden oder du gehst an die Sache mt Oscam Only ran.

Beim 2.Fall aktivierst du die Schnittstelle DVBAPI desOscam, indem du die Rauten entfernst

Code:

#[dvbapi]
#enabled                       = 1
#au                            = 1
#boxtype                       = dreambox
#user                          = dvbapiau

Den user dazu hast du schon angelegt. Dann darf ausschließlich Oscam starten. DVBAPI und ein Emu wie CCCam beissen sich.

Btw wenn du nur den einen Reader hast, dann mach bei den Usern nur

Code:

group = 1

Gruß
Bombadil

LeinadR · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Hallo bombadil,

vielen lieben Dank für die Hilfe.

Die Variante 2 funktioniert.

Ich die den DVBAPI User wieder aktiviert überalle die group auf 1 gesetzt und cccam nicht gestartet.
Nun läuft also die Oscam Only Variante. :emoticon-0148-yes:

Eine Zusatzfrage zu dem Thema noch. Angenommen ich würde nun die Karte noch nach außerhalb weitergeben wollen.
Was soll ich dafür in der Oscam aktivieren und welche Client Software soll der Gegenpart nutzen ?

bombadil · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Hi,

danke fürs Feedback.

Für einen jeden Client außerhalb legst du in der oscam.user einen account an und richtest dazu die C Line auf dem Client ein. Dynadresse und und Portweiterleitung auf Port 12000 (hast du dort definiert) ist Vorauszetzung.
Kleiner Tipp: Ändere den Port 12000 auf einen anderen, da der Standard ist und ihn jeder kennt (Sicherheitsrisiko)

Gruß
Bombadil

4gx35 · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

und hier noch mal Link ist nicht mehr aktiv., was man mindestens wissen sollte

LeinadR · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Hi,

gerne!

DynDNS und Ports weiter leiten ist das kleinste Problem, danke für den Hinweis, den standard Port werde ich noch umbiegen.

Nur zum Verständnis, ich frage lieber nochmal genauer nach,
der Client nutzt dann cccam und trägt sich dort die C Line ein mit den entsprechenden DynDNS und User Daten?
Und auf meinem Oscam Server richte ich dann wieder das cccam Protokoll ein und trage die User noch entsprechend in der oscam.user ein?

Danke Dir schon einmal vorab! :emoticon-0148-yes:

- - - Aktualisiert - - -

Danke 4gx35,

das schaue ich mir gleich auch nochmal in Ruhe an.

4gx35 · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

so einfach geht das, wie du beschrieben hast!

LeinadR · 20. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Sehr schön, dann hab ich ja doch etwas verstanden nachdem ich mich so gut eingelesen habe

Ich werde es probieren und gebe dann gern nochmal Feedback oder stelle Fragen :whistle2:

Danke Euch beiden vielmals!

LeinadR · 21. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Hallo Jungs,

nachdem es gestern Nachmittag ja funktioniert hatte wurde ich am Abend erheblich zurück geschmettert... :-(

Ich hab ein bisischen geschaut, hin und her geschaltet und dann war es auf einmal dunkel.
Hab den Server neugestartet, dann das Gerät, dann ne andere Version von oscam ausprobiert und ich bekomme im Log immer zusehen, dass
der Kartenlesen anscheind ein Problem hat ?! "ERROR in IO_Serial_Read (errno=0 Success) "

Woher könnte die Meldung stammen? Ein Config Problem? Leser Kaputt? Karte defekt (funktioniert allerdings im CI+ Modul im TV)?

Habt ihr ne Idee?

Anbei mein Log...

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Feb 21 17:34:58 2013
-------------------------------------------------------------------------------
2013/02/21 17:34:58 0 s starting thread log_list_thread
2013/02/21 17:34:58 0 s log_list_thread thread started
2013/02/21 17:34:58 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/02/21 17:34:58 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/02/21 17:34:58 0 s client max. idle=120 sec, debug level=0
2013/02/21 17:34:58 0 s max. logsize=20 Kb, loghistorysize=4096 bytes
2013/02/21 17:34:58 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/02/21 17:34:58 0 s services reloaded: 0 services freed, 2 services loaded, rejected 0
2013/02/21 17:34:58 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/02/21 17:34:58 0 s signal handling initialized (type=sysv)
2013/02/21 17:34:58 0 s 164 service-id's loaded in 8ms
2013/02/21 17:34:58 0 s oscam.tiers loading failed
2013/02/21 17:34:58 0 s 14 provid's loaded
2013/02/21 17:34:58 0 s 0 lengths for caid guessing loaded
2013/02/21 17:34:58 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/02/21 17:34:58 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s monitor: initialized (fd=6, port=16500)
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s camd35: disabled
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s cs378x: disabled
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s newcamd: disabled
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s cccam: initialized (fd=7, port=12000, crypted)
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s pandora: disabled
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s csp: disabled
2013/02/21 17:34:58 0 s Starting listener 0
2013/02/21 17:34:58 0 s radegast: disabled
2013/02/21 17:34:58 0 s starting thread http
2013/02/21 17:34:58 0 s http thread started
2013/02/21 17:34:58 0 s starting thread reader check
2013/02/21 17:34:58 0 s reader check thread started
2013/02/21 17:34:58 0 s starting thread check
2013/02/21 17:34:58 0 s check thread started
2013/02/21 17:34:58 0 s creating thread for device /dev/sci0
2013/02/21 17:34:58 581F40 h HTTP Server listening on port 16200
2013/02/21 17:34:58 5806F8 r reader kdg09 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/02/21 17:34:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/02/21 17:34:58 0 s waiting for local card init
2013/02/21 17:34:59 5806F8 r kdg09 card detected
2013/02/21 17:35:02 5806F8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 17:35:05 5806F8 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2013/02/21 17:35:05 5806F8 r ERROR: Could not read reader->convention
2013/02/21 17:35:05 5806F8 r Error activating card.
2013/02/21 17:35:07 5806F8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 17:35:12 5806F8 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2013/02/21 17:35:17 5806F8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 17:35:17 5806F8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/02/21 17:35:22 5806F8 r card system not supported
2013/02/21 17:35:22 5806F8 r Normal mode failed, reverting to Deprecated Mode
2013/02/21 17:35:23 5806F8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 17:35:28 5806F8 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2013/02/21 17:35:34 5806F8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 17:35:34 5806F8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/02/21 17:35:39 5806F8 r card system not supported
2013/02/21 17:35:39 5806F8 r card initializing error
2013/02/21 17:35:42 0 s init for all local cards done
2013/02/21 17:35:42 0 s anti cascading disabled
2013/02/21 17:35:42 58E460 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2013/02/21 17:35:42 58E460 c dvbapi: Warning: line containing rum. in oscam.dvbapi not recognized, ignoring line

2013/02/21 17:35:42 58E460 c dvbapi: Warning: line containing in oscam.dvbapi not recognized, ignoring line

2013/02/21 17:35:42 58E460 c dvbapi: 7 entries read from oscam.dvbapi
2013/02/21 17:35:44 58E460 c dvbapi: [ADD PID 0] CAID: 09C7 ECM_PID: 1873 PROVID: 000000
2013/02/21 17:35:44 58E460 c dvbapi: [ADD PID 1] CAID: 1861 ECM_PID: 186F PROVID: 000000
2013/02/21 17:35:44 58E460 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 1872 PROVID: 000000
2013/02/21 17:35:44 58E460 c dvbapi: [ADD PID 3] CAID: 1722 ECM_PID: 1871 PROVID: 000000
2013/02/21 17:35:44 58E460 c dvbapi: [ADD PID 4] CAID: 1801 ECM_PID: 1870 PROVID: 000000
2013/02/21 17:35:44 58E460 c dvbapi: new program number: D161 (09C7

161 unknown) [pmt_list_management 3]
2013/02/21 17:35:44 58E460 c dvbapiau (09C7&000000/1873/D161/78:10DA): rejected group (1 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:44 58E460 c dvbapiau (1801&000000/1870/D161/4A:A0C3): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:44 58E460 c dvbapiau (1834&000000/1872/D161/89

22E): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:44 58E460 c dvbapiau (1722&000000/1871/D161/54:28C2): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:44 58E460 c dvbapiau (1861&000000/186F/D161/89:508A): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:49 58E460 c dvbapiau (09C7&000000/1873/D161/78:823B): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:50 58E460 c dvbapiau (1801&000000/1870/D161/4A:7AA0): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:50 58E460 c dvbapiau (1834&000000/1872/D161/89:6682): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:50 58E460 c dvbapiau (1722&000000/1871/D161/54:FBDE): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:50 58E460 c dvbapiau (1861&000000/186F/D161/89:060F): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:35:59 58E460 c dvbapiau (09C7&000000/1873/D161/78:8B09): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:36:00 58E460 c dvbapiau (1801&000000/1870/D161/4A:207D): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:36:00 58E460 c dvbapiau (1861&000000/186F/D161/89:80F9): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:36:00 58E460 c dvbapiau (1834&000000/1872/D161/89:95DF): rejected group (0 ms) (0 of 0) (no matching reader)
2013/02/21 17:36:00 58E460 c dvbapiau (1722&000000/1871/D161/54:C87F): rejected group (0 ms) (0 of 0) (no matching reader)

LeinadR · 21. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Noch ein weiteres Log....

Wenn die Karte mal auf den Status "CARD OK" geht und ich dann auf nen Digital Sender schalte der über die Karte laufen müsste, dann steht im WEBIF unter dem Punkt "LB Value/ Reader" beim Reader "by timeout (0ms)"...

Wenn ich dann auf den Reiter Readers gehe habe ich bei
Health NOK: 66 %
Health OK: 33 %

ECMs OK: 1
ECMs NOK: 2

EMM error
UK / G / S / UQ
0 / 1 / 0 / 0

Was ist denn da bloß los bei mir? :-(

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Feb 21 18:22:52 2013
-------------------------------------------------------------------------------
2013/02/21 18:22:52 0 s starting thread log_list_thread
2013/02/21 18:22:52 0 s log_list_thread thread started
2013/02/21 18:22:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6636 (mipsel-tuxbox-linux)
2013/02/21 18:22:52 0 s version=1.20-unstable_svn, build #6636, system=mipsel-tuxbox-linux, nice=-1
2013/02/21 18:22:52 0 s client max. idle=120 sec, debug level=0
2013/02/21 18:22:52 0 s max. logsize=20 Kb, loghistorysize=4096 bytes
2013/02/21 18:22:52 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/02/21 18:22:52 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2013/02/21 18:22:52 0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2013/02/21 18:22:52 0 s signal handling initialized (type=sysv)
2013/02/21 18:22:52 0 s 194 service-id's loaded in 10ms
2013/02/21 18:22:52 0 s oscam.tiers loading failed
2013/02/21 18:22:52 0 s 14 provid's loaded
2013/02/21 18:22:52 0 s 0 lengths for caid guessing loaded
2013/02/21 18:22:52 0 s can't open whitelist file /etc/tuxbox/config/oscam-experimental/oscam.whitelist
2013/02/21 18:22:52 0 s can't open cacheex-matcher file /etc/tuxbox/config/oscam-experimental/oscam.cacheex
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s monitor: initialized (fd=5, port=16500)
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s camd35: disabled
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s cs378x: disabled
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s newcamd: disabled
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s pandora: disabled
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s csp: disabled
2013/02/21 18:22:52 0 s Starting listener 0
2013/02/21 18:22:52 0 s radegast: disabled
2013/02/21 18:22:52 0 s starting thread http
2013/02/21 18:22:52 0 s http thread started
2013/02/21 18:22:52 0 s starting thread reader check
2013/02/21 18:22:52 0 s reader check thread started
2013/02/21 18:22:52 0 s starting thread check
2013/02/21 18:22:52 0 s check thread started
2013/02/21 18:22:52 0 s creating thread for device /dev/sci0
2013/02/21 18:22:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/02/21 18:22:52 0 s waiting for local card init
2013/02/21 18:22:52 581EC0 h HTTP Server listening on port 16200
2013/02/21 18:22:52 5805E8 r reader kdg09 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/02/21 18:22:52 5805E8 r kdg09 card detected
2013/02/21 18:22:55 5805E8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 18:22:55 5805E8 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2013/02/21 18:22:55 5805E8 r ERROR: Could not read reader->convention
2013/02/21 18:22:55 5805E8 r Error activating card.
2013/02/21 18:22:57 5805E8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 18:22:57 5805E8 r ATR: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
2013/02/21 18:22:58 5805E8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 18:22:58 5805E8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] parental lock setting: FF FF FF FF
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] type: VideoGuard XXXXXX XXXXXXX G02/G09 (09C7), caid: 09C7
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] serial: XXXXXXXXXXXXXX, BoxID: 12345678, baseyear: 20XX
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] ready for requests
2013/02/21 18:23:00 5805E8 r found cardsystem videoguard2
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] kdg09 card detected
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] type: VideoGuard XXXXXXX XXXXX G02/G09 (09C7)
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] tier: 00f3, expiry date: 2013/05/18-00:00:00
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] tier: 00f4, expiry date: 2013/05/18-00:00:00
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] tier: 00fa, expiry date: 2013/05/18-00:00:00
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] tier: 00fe, expiry date: 2013/05/18-00:00:00
2013/02/21 18:23:00 5805E8 r [videoguard2-reader] tier: 012d, expiry date: 2013/05/18-00:00:00
2013/02/21 18:23:03 0 s init for all local cards done
2013/02/21 18:23:03 0 s anti cascading disabled
2013/02/21 18:23:03 591DA0 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2013/02/21 18:23:03 591DA0 c dvbapi: Warning: line containing in oscam.dvbapi not recognized, ignoring line

2013/02/21 18:23:03 591DA0 c dvbapi: 0 entries read from oscam.dvbapi
2013/02/21 18:23:08 591DA0 c dvbapi: [ADD PID 0] CAID: 09C7 ECM_PID: 1873 PROVID: 000000
2013/02/21 18:23:08 591DA0 c dvbapi: [ADD PID 1] CAID: 1861 ECM_PID: 186F PROVID: 000000
2013/02/21 18:23:08 591DA0 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 1872 PROVID: 000000
2013/02/21 18:23:08 591DA0 c dvbapi: [ADD PID 3] CAID: 1722 ECM_PID: 1871 PROVID: 000000
2013/02/21 18:23:08 591DA0 c dvbapi: [ADD PID 4] CAID: 1801 ECM_PID: 1870 PROVID: 000000
2013/02/21 18:23:08 591DA0 c dvbapi: new program number: D161 (RTL Television) [pmt_list_management 3]
2013/02/21 18:23:09 591DA0 c starting thread housekeeping lb stats
2013/02/21 18:23:09 591DA0 c housekeeping lb stats thread started
2013/02/21 18:23:09 591DA0 c dvbapi: Start descrambling PID #0 (CAID: 09C7) 1
2013/02/21 18:23:09 591DA0 c dvbapiau (09C7&000000/1873/D161/78:CD05): found (330 ms) by kdg09
2013/02/21 18:23:11 5805E8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 18:23:12 5805E8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 18:23:12 5805E8 r [videoguard2-reader] classD0 ins40: (-2) status not ok 00 00
2013/02/21 18:23:12 591DA0 c dvbapiau (09C7&000000/1873/D161/78:1F03): not found (922 ms) by kdg09
2013/02/21 18:23:20 591DA0 c dvbapi: new program number: 2B5C (0000:2B5C unknown) [pmt_list_management 3]
2013/02/21 18:23:21 591DA0 c dvbapi: [ADD PID 0] CAID: 09C7 ECM_PID: 1873 PROVID: 000000
2013/02/21 18:23:21 591DA0 c dvbapi: [ADD PID 1] CAID: 1861 ECM_PID: 186F PROVID: 000000
2013/02/21 18:23:21 591DA0 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 1872 PROVID: 000000
2013/02/21 18:23:21 591DA0 c dvbapi: [ADD PID 3] CAID: 1722 ECM_PID: 1871 PROVID: 000000
2013/02/21 18:23:21 591DA0 c dvbapi: [ADD PID 4] CAID: 1801 ECM_PID: 1870 PROVID: 000000
2013/02/21 18:23:21 591DA0 c dvbapi: new program number: D161 (RTL Television) [pmt_list_management 3]
2013/02/21 18:23:23 5805E8 r ERROR in IO_Serial_Read (errno=0 Success)
2013/02/21 18:23:26 591DA0 c dvbapi: try pids again #1
2013/02/21 18:23:26 591DA0 c dvbapiau (09C7&000000/1873/D161/78:13E5): timeout (5001 ms)
2013/02/21 18:23:26 591DA0 c dvbapi: try pids again #2
2013/02/21 18:23:26 591DA0 c dvbapiau (09C7&000000/1873/D161/78:13E5): timeout (0 ms)
2013/02/21 18:23:26 591DA0 c dvbapi: try pids again #3
2013/02/21 18:23:26 591DA0 c dvbapi: can't decode channel
2013/02/21 18:23:26 591DA0 c dvbapiau (09C7&000000/1873/D161/78:13E5): timeout (0 ms)

4gx35 · 21. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

die G09 ist eine nds karte, dafür brauchst du aber besser eine neuere oscam version als deine 6638
aktuell ist momentan 84xx , also (evtl. zur sicherheit box neu flashen und) neue oscam oe2.0 installieren
Link dazu in meiner Anleitung post #5

LeinadR · 22. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Hi,

danke für die Info.

Das hab ich mal gemacht und nun scheint es wieder zu laufen...
Also neuste Version OpenMips 2.0 installiert, Gigablue Plugin Feed installiert und darüber dann OScam nach installiert.

Ich behalte das nun nochmal ein paar Tage im Auge und werde dann erst wieder Änderungen an der Box vornehmen um andere Quellen ausschliessen zu können.

Osprey · 22. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Die auf dem online Feed der Gigablue ist doch auch Asbach oder?

Gesendet von meinem GT-I8190 mit Tapatalk 2

LeinadR · 23. Februar 2013

AW: Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

Die aus dem Feed war folgende Version, aber sie läuft

[h=2]OSCAM 1.20-unstable_svn build #7228[/h]

Suche

Suche

Gigablue HD 800 se + oscam + cccam + KD G09 + openmips 2.0

LeinadR

Newbie

bombadil

LeinadR

Newbie

bombadil

4gx35

LeinadR

Newbie

4gx35

LeinadR

Newbie

LeinadR

Newbie

LeinadR

Newbie

4gx35

LeinadR

Newbie

Osprey

LeinadR

Newbie

Ähnliche Themen

Spenden Unterstützung