Freezer beim TV schauen HD01 und V13

[supraracer]

AW: Freezer beim TV schauen HD01 und V13

@Pilot: Ich denke nicht dass es ein Config Problem ist, die Freezer hat er ja bei der V13 und HD01.
Für mich sieht das Log eher nach einem Netzwerkproblem aus wegen dem Disconnect. Kann verschiedene Ursachen haben, die einfachste wäre sowas wie Netzwerkkabel/Netzwerkport Problem am Raspi, Netzwerkport an der Fritzbox, usw.
Zur Sicherheit würde ich aber mal die OScam downgraden, um einen Bug auszuschließen.

-supraracer

 

[johndo]

AW: Freezer beim TV schauen HD01 und V13

Das mit den Netzwerkports werde ich mal prüfen.

Auf welche Version sollte ich Downgraden?

 

[supraracer]

AW: Freezer beim TV schauen HD01 und V13

Einfach auf eine 99xx und schauen ob sich etwas ändert/bessert, wenn alles unverändert bleibt (wovon ich ausgehe, aber man sollte es ausschließen) machst du wieder deine aktuelle drauf.

-supraracer

 

[johndo]

AW: Freezer beim TV schauen HD01 und V13

Bezüglich Netzwerkports konnte ich nichts ungewöhnliches feststellen. Bei der Fritzbox sind alle Netzwerkports auf 1GBit eingestellt also kein ECOMode. Zur Sicherheit habe ich mal die Fritzbox Raspberry etc. alles neugestartet brachte aber keine Besserung.

 

[supraracer]

AW: Freezer beim TV schauen HD01 und V13

Nimm mal ein anderes Netzwerkkabel und stecke den Rasp auf einen anderen LAN Port an der Fritz.
Deine VU hängt auch direkt an der Fritz?

-supraracer

 

[johndo]

AW: Freezer beim TV schauen HD01 und V13

Oder du fragst hier nach, warum ins7e11 bei dir nicht greift: Link Removed

Habe ich gemacht. Was müsste den für ein Parameter bei dem ATR angezeigt werden wenn es funktioniert?

- - - - - - - - - -

Nimm mal ein anderes Netzwerkkabel und stecke den Rasp auf einen anderen LAN Port an der Fritz.
Deine VU hängt auch direkt an der Fritz?

-supraracer

Hi,

beides eben gemacht . Die VU war nicht direkt an der Fritzbox habe ich aber mal drangehängt das Problem besteht aber weiterhin.

 

[Pilot]

AW: Freezer beim TV schauen HD01 und V13

Da müsste anstelle der 11 ein 15 stehen
so sieht es bei meiner V14 Karte aus: 2015/03/15 19:14:25 9D48D00 r (reader) v14sat [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

 

[supraracer]

AW: Freezer beim TV schauen HD01 und V13

Freezt das so oft oder wie kannst du das so schnell gleich testen? Sind im Log dann immer die Disconnects zu sehen?
Kannst du die Fritzbox mal komplett weg lassen und die VU direkt per Patchkabel mit dem PI verbinden zum Test?

-supraracer

 

[johndo]

Hi,

ja ich kann das relativ schnell testen. Die Disconnects kommen so alle 4 bis 5 Minuten.

Mh, ich habe mal noch einen anderen Port von der Fritzbox versucht bisher keine Disconnects.

 

[supraracer]

AW: Freezer beim TV schauen HD01 und V13

Corpus Delicti gefunden? Ich drücke dir die Daumen. :emoticon-0125-mmm:

-supraracer

 

[johndo]

Shit zu früh gefreut...eben wieder einen Disconnect gehabt.

Kommt immer das hier:

Spoiler

2015/03/15 19:41:39 1A90758 c (client) client(B69D0470) duplicate user 'User' from x.x.x.x (prev x.x.x.x) set to fake (uniq=3)
2015/03/15 19:41:39 1AC0200 c (ecm) User (09C4&000000/0B58/0074/B3:00000000000000000000000000000000): fake (0 ms) - Sky Action HD
2015/03/15 19:41:39 1AC0200 c (client) User disconnected from x.x.x.x
2015/03/15 19:41:39 1A90758 c (client) encrypted cccam-client x.x.x.x granted (User, au=auto (2 reader))

Beüglich dem Übertaktungsproblem sieht das jetzt besser aus:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Mar 15 19:52:12 2015
-------------------------------------------------------------------------------
2015/03/15 19:52:12 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10627 (arm-linux-gnueabihf)
2015/03/15 19:52:12 0 s (main) System name = Linux
2015/03/15 19:52:12 0 s (main) Host name = pi01
2015/03/15 19:52:12 0 s (main) Release = 3.18.7+
2015/03/15 19:52:12 0 s (main) Version = #755 PREEMPT Thu Feb 12 17:14:31 GMT 2015
2015/03/15 19:52:12 0 s (main) Machine = armv6l
2015/03/15 19:52:12 0 s (main) creating pidfile /usr/local/etc/.oscam/oscam.pid with pid 27930
2015/03/15 19:52:12 0 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/03/15 19:52:12 0 s (config) userdb reloaded: 8 accounts loaded, 0 expired, 0 disabled
2015/03/15 19:52:12 0 s (main) signal handling initialized
2015/03/15 19:52:12 0 s (config) 170 service-id's loaded in 3 ms
2015/03/15 19:52:12 0 s (config) 36 tier-id's loaded
2015/03/15 19:52:12 0 s (net) cccam: initialized (fd=6, port=54322)
2015/03/15 19:52:12 0 s (main) Binary without Irdeto module - no EMM processing for Irdeto possible!
2015/03/15 19:52:12 0 s (main) Binary without Conax module - no EMM processing for Conax possible!
2015/03/15 19:52:12 0 s (main) Binary without Cryptoworks module - no EMM processing for Cryptoworks possible!
2015/03/15 19:52:12 0 s (main) Binary without Seca module - no EMM processing for Seca possible!
2015/03/15 19:52:12 0 s (main) Binary without Viaccess module - no EMM processing for Viaccess possible!
2015/03/15 19:52:12 0 s (main) Binary without DRE Crypt module - no EMM processing for DRE Crypt possible!
2015/03/15 19:52:12 0 s (main) Binary without TONGFANG module - no EMM processing for TONGFANG possible!
2015/03/15 19:52:12 0 s (main) Binary without Bulcrypt module - no EMM processing for Bulcrypt possible!
2015/03/15 19:52:12 0 s (main) Binary without Griffin module - no EMM processing for Griffin possible!
2015/03/15 19:52:12 0 s (main) Binary without DGCrypt module - no EMM processing for DGCrypt possible!
2015/03/15 19:52:12 0 s (reader) sky_v13 [mouse] creating thread for device /dev/ttyUSB1
2015/03/15 19:52:12 0 s (reader) hdplus_hd01 [mouse] creating thread for device /dev/ttyUSB0
2015/03/15 19:52:12 0 s (main) waiting for local card init
2015/03/15 19:52:12 1F01AE8 h (webif) webif: decompressed 149164 bytes back into 352624 bytes
2015/03/15 19:52:12 1F01AE8 h (webif) HTTP Server running. ip=0.0.0.0 port=8080
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Buffers readed 0 bytes total time_us 75463
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Buffers readed 0 bytes total time_us 76120
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 1 value 03 time_us 2907
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 1 value 03 time_us 3969
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 2 value 00 time_us 15026
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 3 value 56 time_us 18198
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 4 value ff time_us 13866
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 5 value 00 time_us 15206
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 2 value 00 time_us 70811
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 3 value 57 time_us 1152
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 4 value 5b time_us 1135
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 5 value 3f time_us 1236
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 6 value f7 time_us 1289
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 7 value fe time_us 1296
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 6 value 76 time_us 15293
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 8 value 7d time_us 1599
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 9 value f2 time_us 911
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 10 value 1f time_us 1463
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 11 value 69 time_us 1259
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 12 value 00 time_us 1292
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 13 value ad time_us 1423
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 14 value f5 time_us 2794
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 15 value f1 time_us 67
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 16 value ff time_us 2642
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 7 value 7e time_us 14365
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 17 value ff time_us 1437
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 18 value f5 time_us 1129
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 19 value 73 time_us 1269
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 20 value 7f time_us 1319
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 21 value ff time_us 1276
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Flush readed byte Nr 22 value 57 time_us 1231
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 8 value 71 time_us 14266
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 9 value 80 time_us 19830
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 10 value 1d time_us 19684
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 11 value ff time_us 18515
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Buffers readed 22 bytes total time_us 179846
2015/03/15 19:52:12 1F011A8 r (reader) sky_v13 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 12 value dd time_us 22814
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 13 value 8d time_us 19830
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 14 value 7d time_us 18364
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 15 value 35 time_us 19853
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 16 value f5 time_us 18460
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 17 value 73 time_us 19814
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 18 value d3 time_us 19847
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 19 value b3 time_us 19872
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 20 value fb time_us 18399
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 21 value b5 time_us 19834
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 22 value 59 time_us 21259
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 23 value 91 time_us 16988
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 24 value 1d time_us 19724
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 25 value 3d time_us 18488
2015/03/15 19:52:12 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 26 value 93 time_us 19807
2015/03/15 19:52:13 1F01648 r (reader) hdplus_hd01 [mouse] Flush readed byte Nr 27 value 79 time_us 19839
2015/03/15 19:52:13 1F01648 r (reader) hdplus_hd01 [mouse] Buffers readed 27 bytes total time_us 565753
2015/03/15 19:52:13 1F01648 r (reader) hdplus_hd01 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/03/15 19:52:13 1F01648 r (reader) hdplus_hd01 [mouse] card detected
2015/03/15 19:52:13 1F011A8 r (reader) sky_v13 [mouse] card detected
2015/03/15 19:52:13 1F01648 r (reader) hdplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75257
2015/03/15 19:52:13 1F011A8 r (reader) sky_v13 [mouse] Buffers readed 0 bytes total time_us 75694
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] Setting baudrate to 9600 bps
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] Buffers readed 0 bytes total time_us 75347
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] Setting baudrate to 111600 bps
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] Buffers readed 0 bytes total time_us 75303
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] Card responded ok for ifsd request of 251
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [mouse] Card type: P1TV
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [mouse] Rom version: 10A7
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [mouse] Unable to get smartcard credit
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [mouse] detect native nagra card
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [mouse] found card system videoguard2
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [videoguard2] card detected
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2015/03/15 19:52:16 1F011A8 r (reader) sky_v13 [mouse] Buffers readed 0 bytes total time_us 75225
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [mouse] ready for requests
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [mouse] found card system nagra
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] ROM: D N A S P 1 4 2
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] REV: R e v G C 6
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] SER: ############
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] CAID: 1830
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] Prv.ID: 00 00 00 00
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] IRD ID: ############
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] active to: 2015/05/06 12:59
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] -----------------------------------------
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] |id |tier |valid from |valid to |
2015/03/15 19:52:16 1F01648 r (reader) hdplus_hd01 [nagra] +----+--------+------------+------------+
2015/03/15 19:52:17 1F01648 r (reader) hdplus_hd01 [nagra] |8011|0BEA |2011/10/05 |2016/01/25 |
2015/03/15 19:52:17 1F01648 r (reader) hdplus_hd01 [nagra] |8011|0064 |2010/10/04 |2011/10/05 |
2015/03/15 19:52:17 1F01648 r (reader) hdplus_hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/03/15 19:52:17 1F01648 r (reader) hdplus_hd01 [nagra] -----------------------------------------
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] Setting baudrate to 153600 bps
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] Buffers readed 0 bytes total time_us 75132
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/03/15 19:52:18 1F011A8 r (reader) sky_v13 [mouse] Card type: P1TV
2015/03/15 19:52:18 1F011A8 r (reader) sky_v13 [mouse] Rom version: 10A7
2015/03/15 19:52:18 1F011A8 r (reader) sky_v13 [mouse] Unable to get smartcard credit
2015/03/15 19:52:18 1F011A8 r (reader) sky_v13 [mouse] FuseByte: 25
2015/03/15 19:52:18 1F011A8 r (reader) sky_v13 [mouse] Region Code: 00BO0102
2015/03/15 19:52:18 1F011A8 r (reader) sky_v13 [mouse] Country Code: DEU
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [mouse] Pincode read: 8425
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [mouse] PCB settings: FF FF FF FF
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [mouse] ready for requests
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [mouse] found card system videoguard2
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] card detected
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] ------------------------------------------------------------------
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] +---------+----------+---------------------+---------------------+
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 0068 --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 0069 --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 006a --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 006b --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 0065 --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 0066 --| 2015/04/24-01:00:00 | Sky HD Bundesliga Fanzone
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 0067 --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 006f --| 2015/04/24-01:00:00 |
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 007b --| 2015/04/24-01:00:00 | Sky AT/DE / 19.2E / de
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 007d --| 2015/04/24-01:00:00 | Sky Sport SD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 0081 --| 2015/04/24-01:00:00 | Sky Bundesliga SD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 008e --| 2015/04/24-01:00:00 | Beate-Uhse.tv
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00c0 --| 2015/04/24-01:00:00 | Sky Welt Extra
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00c8 --| 2015/04/24-01:00:00 | Sky Film SD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00c9 --| 2015/04/24-01:00:00 | Sky Welt HD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00ca --| 2015/04/24-01:00:00 | Sky Film HD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00c7 --| 2015/04/24-01:00:00 | Sky Welt SD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00e4 --| 2015/04/24-01:00:00 | Sky Bundesliga HD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00e5 --| 2015/04/24-01:00:00 | Sky Sport HD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00fa --| 2015/04/24-01:00:00 | Sky Blue Movie HD
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/04/24-01:00:00 | Sky Blue Movie (Info, 1-3)
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] |-- 00 ---|-- 00ff --| 2015/04/24-01:00:00 | Sky AT/DE / 19.2E / de
2015/03/15 19:52:19 1F011A8 r (reader) sky_v13 [videoguard2] ------------------------------------------------------from-ins70--
2015/03/15 19:52:20 0 s (main) init for all local cards done
2015/03/15 19:52:20 0 s (emmcache) loaded 47 emmcache records from /usr/local/etc/oscam.emmcache in 6 ms
2015/03/15 19:52:20 0 s (emmcache) loaded 47 emmstat records from /usr/local/etc/oscam.emmstat in 2 ms
2015/03/15 19:52:20 0 s (anticasc) anti cascading disabled

 

[Pilot]

AW: Freezer beim TV schauen HD01 und V13

Ja stimmt.
Wie hast du das erreicht?

 

[johndo]

AW: Freezer beim TV schauen HD01 und V13

Ja stimmt.
Wie hast du das erreicht?

Hi,

also ganz verstehe ich dich oder das Log nicht . Wenn ich das ältere Log mit dem neuen vergleiche sehe ich keinen Unterschied?

Log alt

Spoiler

2015/03/15 18:52:35 1A8E1B8 r (reader) sky_v13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/03/15 18:52:35 1A8E1B8 r (reader) sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2015/03/15 18:52:35 1A902B8 r (reader) hdplus_hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/03/15 18:52:35 1A902B8 r (reader) hdplus_hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2015/03/15 18:52:38 1A8E1B8 r (reader) sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/03/15 18:52:38 1A8E1B8 r (reader) sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

Log neu

Spoiler

2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/03/15 19:52:15 1F01648 r (reader) hdplus_hd01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

FÜr mich sieht das identisch aus? Ist das Übertakten der Karten jetzt ok oder nicht?

 

[Pilot]

AW: Freezer beim TV schauen HD01 und V13

Irgendwas hast du geändert.
Im Beitrag 26 von dir finde ich diesen Eintrag: 2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15

Stop: im letzen Beitrag steht das im neuen log: 2015/03/15 19:52:17 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
Aber auch im alten log: 2015/03/15 18:52:38 1A8E1B8 r (reader) sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15


So wie ich das im Beitrag 26 von dir sehe wird ins7e11 erst zum Schluß initialisiert.
Am Anfang steht immer das: 2015/03/15 19:52:14 1F011A8 r (reader) sky_v13 [mouse] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11

Aber was zum Schluß steht ist wichtig.
Also läuft in7e11 bei dir.


Das löst aber diesen Fehler nicht: 2015/03/15 19:41:39 1AC0200 c (ecm) User (09C4&000000/0B58/0074/B3:00000000000000000000000000000000): fake (0 ms) - Sky Action HD

Teste das: mach einen Sendersuchlauf bei dem Receiver, der diese Fehlermeldung hervor ruft.
Dieser Tip hat bei vielen Nichtlinux Receivern geholfen.

 

[johndo]

AW: Freezer beim TV schauen HD01 und V13

Hi,

sollte ich vielleicht das in7e11 in der Konfig nach oben schieben oder ist das dann egal?

Dein Tipp mit dem Sendersuchlauf war gar nicht so schlecht. Ich habe mal einen Sendersuchlauf gemacht und ab diesem Zeitpunkt habe ich keine Diconnects mehr? Kann das damit wirklich zusammenhängen? Ich habe einen Linuxreceiver? Ist eine VU+ Duo2 mit dem VTi Image?