Hi,
ich habe mir vor ein paar Tagen eine DM 800 geholt. Jetzt möchte ich gerne meine I02 (Unity Media) Karte im Slot der Dream betreiben. Leider klappt das garnicht. Egal was ich probiere ich bekomme einfach kein Bild. Allerdings steht folgende Info im WebInterface der CCam:
Server connections: 2
|Host |Connected |Type |Version|NodeID| Cards | CAID/Idents |
|127.0.0.1:30000 |00d 00:00:06 |newcamd| | | 1 |local 1722:000000 1(0) |
|127.0.0.1:30001 | |newcamd| | | 0 | |
Hoffe Ihr könnt mir helfen, hier mal meine Configs für CCcam 2.0.11 und NewCS 1.62:
Newcs.xml:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around )
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="SCI">
<device>
<name>Lower</name>
<type>sci</type>
<!-- <mhz>600</mhz> -->
<node>/dev/sci0</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<!-- <irdeto-camkey>0000000000000000</irdeto-camkey> -->
<!-- <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> -->
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>30000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<!-- <mhz>600</mhz> -->
<node>/dev/sci1</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<!-- <irdeto-camkey>0000000000000000</irdeto-camkey> -->
<!-- <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> -->
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>30001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>2</emm>
<ecm>3</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>cccam</name>
<password>cccamm</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>
Und hier die CCcam.cfg bzw. damit das NewCS erkannt wird, müsste dort eigentlich nur eine NLine drin stehen, oder:
N: 127.0.0.1 30000 cccam cccamm 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Dann noch,al eine kurze Frage am Ende: Kann man die I02 Karten nicht auch irgendwie ohne NewCS in der Dream zum laufen bekommen?
Vielen Dank für eure Hilfe.
Gruß
Fa
ich habe mir vor ein paar Tagen eine DM 800 geholt. Jetzt möchte ich gerne meine I02 (Unity Media) Karte im Slot der Dream betreiben. Leider klappt das garnicht. Egal was ich probiere ich bekomme einfach kein Bild. Allerdings steht folgende Info im WebInterface der CCam:
Server connections: 2
|Host |Connected |Type |Version|NodeID| Cards | CAID/Idents |
|127.0.0.1:30000 |00d 00:00:06 |newcamd| | | 1 |local 1722:000000 1(0) |
|127.0.0.1:30001 | |newcamd| | | 0 | |
Hoffe Ihr könnt mir helfen, hier mal meine Configs für CCcam 2.0.11 und NewCS 1.62:
Newcs.xml:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around )
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dreambox/TD etc. that use SCI interfaces.
-->
<newCSconfig>
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<readers name="SCI">
<device>
<name>Lower</name>
<type>sci</type>
<!-- <mhz>600</mhz> -->
<node>/dev/sci0</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<!-- <irdeto-camkey>0000000000000000</irdeto-camkey> -->
<!-- <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> -->
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>30000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<!-- <mhz>600</mhz> -->
<node>/dev/sci1</node>
<export>No</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<!-- <irdeto-camkey>0000000000000000</irdeto-camkey> -->
<!-- <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data> -->
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>30001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>2</emm>
<ecm>3</ecm>
</cache>
<debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>cccam</name>
<password>cccamm</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>
Und hier die CCcam.cfg bzw. damit das NewCS erkannt wird, müsste dort eigentlich nur eine NLine drin stehen, oder:
N: 127.0.0.1 30000 cccam cccamm 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Dann noch,al eine kurze Frage am Ende: Kann man die I02 Karten nicht auch irgendwie ohne NewCS in der Dream zum laufen bekommen?
Vielen Dank für eure Hilfe.
Gruß
Fa