yavdr, vdr-sc, softcam.key

S04sauger · 24. Januar 2011

AW: yavdr, vdr-sc, softcam.key

scovery1 schrieb:
Hallo,

Habe es geschafft mit Sc ORF und AustriaSat helle zu bekomme. Leider scheitere ich dabei das ganze für MTV umzusetzen. Wäre super wenn mir jemand dabei helfen könnte.

MfG

....verstehe ich jetzt nicht. Wenn ORF und Austria-Sat funktionieren, dann geht auch das zugehörige MTV. Hast du auch die Sender aus dem Austria-Sat-Paket ?

Uwe

scovery1 · 25. Januar 2011

Re: AW: yavdr, vdr-sc, softcam.key

S04sauger schrieb:
....verstehe ich jetzt nicht. Wenn ORF und Austria-Sat funktionieren, dann geht auch das zugehörige MTV. Hast du auch die Sender aus dem Austria-Sat-Paket ?

Uwe

Verstehe ich auch nicht also AXN, Hustler, Dorcel usw funktionieren auch nur eben MTV nicht. Vllt. liegt es ja an meinen Frequenzen in der Channels.conf. Hier mal ein Auszug aus meiner Kanalliste.

Code:

MTV Music;MTV Networks Europe:11973:VC34M2O0S0:S19.2E:27500:4011+8190=2:4012=@4:0:100,B00,D00,D02,1815,500,D05:28671:1:1078:0
MTV ROCKS;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3091+8190=2:3092=@4:0:100,D00,B00,D02,1815,1810,500,D05:28659:1:1066:0
MTV Dance;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3051+8190=2:3052=@4:0:100,B00,D00,D02,1815,500,D05:28655:1:1066:0
MTV Hits;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3041+8190=2:3042=@4:0:100,B00,D00,D02,1815,D05:28654:1:1066:0
VH1;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3061+8190=2:3062=@4:0:B00,100,D00,D02,1815,1810,500,D05:28656:1:1066:0
Hustler TV;CANALDIGITAAL:12344:HC34M2O0S0:S19.2E:27500:526+8190=2:119=dut@4:0:D03,D70,624,D96,D05,D95,648,100:2042:53:1097:0
DORCEL TV;CANALDIGITAAL:12344:HC34M2O0S0:S19.2E:27500:522+8190=2:124=dut@4:0:622,D05,D95,648,100,500:2045:53:1097:0
Alpenglühen TVX,AlpenTVX;BetaDigital:12149:HC34M2O0S0:S19.2E:27500:255=2:256=deu@4:0:0:70:133:7:0

Konnte aber eigentlich keinen Fehler endecken, oder senden die nicht auf 11973Mhz?

MfG

S04sauger · 25. Januar 2011

AW: yavdr, vdr-sc, softcam.key

Hi,

mmhh, der einzige Unterschied zu meinen Kanälen ist aber konstant, also auch bei den Kanälen die funktionieren. Ist dein Empfangspegel ausreichend ? Hier noch meine Kanäle:

:->Oesterreich
ORF1;ORF:12692:hC56:S19.2E:22000:160=2:161=deu;163=deu:16505,D95,648,1702,1833,9C4:13001:1:1117:0
ORF2;ORF:12692:hC56:S19.2E:22000:500=2:501=deu;503=deu:50595,D05,648,1702,1833,9C4:13002:1:1117:0
ATV;ATV+:12692:hC56:S19.2E:22000:506=2:507=deu:50905,D95,648,1702,1833,9C4:13012:1:1117:0
VIVA Ã–sterreich;MTV Networks:12226:hC34:S19.2E:27500:515=2:662=deu:578:0:28641:1:1091:0
ORF1 HD;ORF:11302:HC23M5O35S1:S19.2E:22000:1920=27:1921=deu,1922=eng;1923=deu:192505,1702,1833,648,D95,9C4:4911:1:1007:0
ORF2 HD;ORF:11302:HC23M5O35S1:S19.2E:22000:2920=27:2921=deu,2922=eng;2923=deu:292505,1702,1833,648,D95,9C4:4912:1:1007:0
NICK / Comedy Ã–sterreich;MTV Networks:12226:hC34:S19.2E:27500:513=2:661=deu:577:0:28640:1:1091:0
:->AustriaSat
Animax;CANALDIGITAAL:12344:HC34M2O0S0:S19.2E:27500:524+8190=2:126=deu:0:1702,1833,9C4,D95,648,D05,100:2047:53:1097:0
Sat.1 Comedy;ProSiebenSat.1:12545:HC56M2O0S0:S19.2E:22000:1535=2:1536=deu:0:1702,1833,9C4,D05,D95,648:17505:1:1107:0
kabel eins classics;ProSiebenSat.1:12545:HC56M2O0S0:S19.2E:22000:1791=2:1792=deu:0:1702,1833,9C4,D05,D95,648:17506:1:1107:0
RTL Living;RTL:12188:HC34M2O0S0:S19.2E:27500:301=2:303=deu:0:1702,1833,9C4,1837,D05,D95,648:12030:1:1089:0
sportdigital;SKY:11876:HC34M2O0S0:S19.2E:27500:2559=2:2560=deu:0:1702,1837,1833,9C4,D05,D95,648:69:133:9:0
MTV Music;MTV Networks Europe:11973:VC34M2O0S0:S19.2E:27500:4011+8190=2:4012:0:100,B00,D00,D02,1815,500,D05:28671:1:1078:0
MTV ROCKS;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3091+8190=2:3092:0:100,D00,B00,D02,1815,1810,500,D05:28659:1:1066:0
MTV Dance;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3051+8190=2:3052:0:100,B00,D00,D02,1815,500,D05:28655:1:1066:0
MTV Hits;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3041+8190=2:3042:0:100,B00,D00,D02,1815,D05:28654:1:1066:0
VH1;MTV Networks Europe:11739:VC34M2O0S0:S19.2E:27500:3061+8190=2:3062:0:B00,100,D00,D02,1815,1810,500,D05:28656:1:1066:0
Hustler TV;CANALDIGITAAL:12344:HC34M2O0S0:S19.2E:27500:526+8190=2:119=dut:003,D70,624,D96,D05,D95,648,100:2042:53:1097:0
DORCEL TV;CANALDIGITAAL:12344:HC34M2O0S0:S19.2E:27500:522+8190=2:124=dut:0:622,D05,D95,648,100,500:2045:53:1097:0
AlpenglÃ¾hen TVX,AlpenTVX;BetaDigital:12149:HC34M2O0S0:S19.2E:27500:255=2:256=deu:0:1702,1837,1833,9C4,D05,D95,648,100:70:133:7:0

scovery1 · 26. Januar 2011

Danke für den Tipp mit der Empfangqualität. Daran hat es gelegen, habe mal die Kabel bei den TV Karten getauscht, jetzt geht es.

MfG

ranXeron · 30. Januar 2011

AW: yavdr, vdr-sc, softcam.key

doc34 schrieb:
Diese Daten in sc kopieren
h**p://www.netuploaded.com/cusdvvkgvz9d/vdr_soft.rar.html

Müssen alle im rar-archiv enthaltenen Dateien nach /var/lib/vdr/plugins/sc/ kopiert werden??

Thnx schon mal fuer die Hilfe

doc34 · 31. Januar 2011

AW: yavdr, vdr-sc, softcam.key

Du kannst die cccam sachen auch weglassen

johnzac · 8. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Hallo

Ich hoffe ihr könnt mir helfen

ich bekomme den vdr-sc einfach nicht zum laufen

yavdr 3.0 mit mcli-plugin (NetCeiver) installiert, Funktioniert soweit

jetzt hab ich laut Anleitung den SC installiert

Wenn ich auf ORF1 gehe kommt die Meldung: "Kanal nicht verfügbar"

1. im Menu unter Plugin wird der SC als erster angezeigt (sc (1.0.0pre...)

2. mein syslog:

Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-sc.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-mcli.so.1.7.16
Feb 8. 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-channellists.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-iptv.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-xineliboutput.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] [xine..put] Listening on address '127.0.0.1' port 37890
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-epgsearch.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-extrecmenu.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-epgsearchonly.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-quickepgsearch.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-menuorg.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-conflictcheckonly.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-live.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-vnsiserver.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-server.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading plugin: /usr/lib/vdr/plugins/libvdr-wirbelscan.so.1.7.16
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/setup.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/sources.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/diseqc.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/channels.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/timers.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/commands.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/reccmds.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/svdrphosts.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/remote.conf
Feb 8 22:35:42 yavdr vdr: [1216] loading /var/lib/vdr/keymacros.conf
Feb 8 22:35:42 yavdr vdr: [1298] video directory scanner thread started (pid=1216, tid=1298)
Feb 8 22:35:42 yavdr vdr: [1299] video directory scanner thread started (pid=1216, tid=1299)
Feb 8 22:35:42 yavdr vdr: [1216] reading EPG data from /var/cache/vdr/epg.data
Feb 8 22:35:42 yavdr vdr: [1299] video directory scanner thread ended (pid=1216, tid=1299)
Feb 8 22:35:42 yavdr vdr: [1298] video directory scanner thread ended (pid=1216, tid=1298)
Feb 8 22:35:43 yavdr acpid: client 992[0:0] has disconnected
Feb 8 22:35:43 yavdr acpid: client 992[0:0] has disconnected
Feb 8 22:35:43 yavdr acpid: client connected from 992[0:0]
Feb 8 22:35:43 yavdr acpid: 1 client rule loaded
Feb 8 22:35:43 yavdr acpid: client connected from 992[0:0]
Feb 8 22:35:43 yavdr acpid: 1 client rule loaded
Feb 8 22:35:43 yavdr vdr: [1216] registered source parameters for 'A - ATSC'
Feb 8 22:35:43 yavdr vdr: [1216] registered source parameters for 'C - DVB-C'
Feb 8 22:35:43 yavdr vdr: [1216] registered source parameters for 'S - DVB-S'
Feb 8 22:35:43 yavdr vdr: [1216] registered source parameters for 'T - DVB-T'
Feb 8 22:35:43 yavdr vdr: [1216] no DVB device found
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: sc (1.0.0pre-HG-61975953edd0+): Ein Software emuliertes CAM
Feb 8 22:35:43 yavdr vdr: [1216] [general.debug] logfile '/var/log/vdr-sc' opened
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] SC version 1.0.0pre-HG-61975953edd0+ initializing (VDR 1.7.16)
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: mcli (0.9.1): NetCeiver Client Application
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: text2skin (1.3.1): Lader für textbasierte Skins
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: channellists (0.0.4): Verwalte deine Kanallisten
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: iptv (0.4.2): Erlebe IPTV
Feb 8 22:35:43 yavdr vdr: [1216] registered source parameters for 'I - IPTV'
Feb 8 22:35:43 yavdr vdr: [1216] new device number 9
Feb 8 22:35:43 yavdr vdr: [1216] creating IPTV device 0 (CardIndex=8)
Feb 8 22:35:43 yavdr vdr: [1316] section handler thread started (pid=1216, tid=1316)
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: xineliboutput (1.0.90-cvs): X11/xine-lib Ausgabe-Plugin
Feb 8 22:35:43 yavdr vdr: [1216] new device number 10
Feb 8 22:35:43 yavdr vdr: [1216] [xine..put] cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us
Feb 8 22:35:43 yavdr vdr: [1216] [xine..put] cTimePts: using monotonic clock
Feb 8 22:35:43 yavdr vdr: [1216] [xine..put] RTP SSRC: 0x4cb9858c
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: epgsearch (0.9.25.beta20): Suche im EPG nach Wiederholungen und anderem
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: femon (1.7.8): DVB Signal Informationsanzeige (OSD)
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: extrecmenu (1.2.1pre): Erweitertes Aufzeichnungs-Menü
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: epgsearchonly (0.0.1): Direkter Zugriff auf epgsearch's Suchenmenu
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: quickepgsearch (0.0.1): Schnelle Suche nach Sendungen
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: menuorg (0.4.4): Reorganisiert das Haupmenü
Feb 8 22:35:43 yavdr vdr: [1216] loading menuorg config file from /var/lib/vdr/plugins/menuorg.xml
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: conflictcheckonly (0.0.1): Direkter Zugriff auf epgsearch's Konflikt-Prüfungs-Menü
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: live (0.2.0): Live Interactive VDR Environment
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: vnsiserver (0.0.1): VDR-Network-Streaming-Interface (VNSI) Server
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: streamdev-server (0.5.0-CVS): VDR Streaming Server
Feb 8 22:35:43 yavdr vdr: [1216] initializing plugin: wirbelscan (0.0.5-3): DVB and pvrinput channel scan for VDR
Feb 8 22:35:43 yavdr vdr: [1216] setting primary device to 2
Feb 8 22:35:43 yavdr vdr: [1216] assuming manual start of VDR
Feb 8 22:35:43 yavdr vdr: [1216] SVDRP listening on port 6419
Feb 8 22:35:43 yavdr vdr: [1216] skin "anthra_1920_OS" not available - using "classic" instead
Feb 8 22:35:43 yavdr vdr: [1216] loading /var/lib/vdr/themes/classic-default.theme
Feb 8 22:35:43 yavdr vdr: [1216] starting plugin: sc
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] SC version 1.0.0pre-HG-61975953edd0+ starting (VDR 1.7.16)
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] loading keys from /var/lib/vdr/plugins/sc/SoftCam.Key
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] loading ecm cache from /var/lib/vdr/plugins/sc/ecm.cache
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] loading smartcard data from /var/lib/vdr/plugins/sc/smartcard.conf
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] loading cardslot config from /var/lib/vdr/plugins/sc/cardslot.conf
Feb 8 22:35:43 yavdr vdr: [1216] [general.info] loading overrides from /var/lib/vdr/plugins/sc/override.conf
Feb 8 22:35:43 yavdr vdr: [1216] starting plugin: mcli
Feb 8 22:35:43 yavdr vdr: [1318] SC housekeeper thread started (pid=1216, tid=1318)
Feb 8 22:35:43 yavdr vdr: [1216] mcli v0.9.1 started
Feb 8 22:35:43 yavdr vdr: [1216] starting plugin: text2skin

3. mein vdr-sc log:

Feb 8 22:34:59.049 [general.debug] SC cleanup done
Feb 8 22:35:43.347 [general.debug] logfile '/var/log/vdr-sc' opened
Feb 8 22:35:43.347 [general.info] SC version 1.0.0pre-HG-61975953edd0+ initializing (VDR 1.7.16)
Feb 8 22:35:43.397 [general.info] SC version 1.0.0pre-HG-61975953edd0+ starting (VDR 1.7.16)
Feb 8 22:35:43.397 [core.load] ** Plugin config:
Feb 8 22:35:43.397 [core.load] ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Feb 8 22:35:43.397 [core.load] ** Local systems DON'T take priority over cached remote
Feb 8 22:35:43.397 [core.load] ** Concurrent FF recordings are NOT allowed
Feb 8 22:35:43.397 [core.load] ** Force transfermode with digital audio
Feb 8 22:35:43.397 [core.load] ** ECM cache is set to enabled
Feb 8 22:35:43.397 [core.load] ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Feb 8 22:35:43.397 [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
Feb 8 22:35:43.398 [general.info] loading keys from /var/lib/vdr/plugins/sc/SoftCam.Key
Feb 8 22:35:43.398 [core.load] loaded 4 keys from /var/lib/vdr/plugins/sc/SoftCam.Key
Feb 8 22:35:43.398 [general.info] loading ecm cache from /var/lib/vdr/plugins/sc/ecm.cache
Feb 8 22:35:43.399 [general.info] loading smartcard data from /var/lib/vdr/plugins/sc/smartcard.conf
Feb 8 22:35:43.399 [core.load] loaded 0 smartcard data from /var/lib/vdr/plugins/sc/smartcard.conf
Feb 8 22:35:43.399 [general.info] loading cardslot config from /var/lib/vdr/plugins/sc/cardslot.conf
Feb 8 22:35:43.399 [general.info] loading overrides from /var/lib/vdr/plugins/sc/override.conf
Feb 8 22:35:43.400 [core.override] tunnel: 1833:S19.2E: - to 1702, rewriter nagra-beta(1001)
Feb 8 22:35:43.400 [core.load] loaded 1 overrides from /var/lib/vdr/plugins/sc/override.conf
Feb 8 22:35:43.400 [core.load] ** registered systems:
Feb 8 22:35:43.400 [core.load] ** SC-Conax (pri -5)
Feb 8 22:35:43.400 [core.load] ** Cryptoworks (pri -10)
Feb 8 22:35:43.400 [core.load] ** SC-Cryptoworks (pri -5)
Feb 8 22:35:43.400 [core.load] ** Conax (pri -10)
Feb 8 22:35:43.400 [core.load] ** Seca (pri -10)
Feb 8 22:35:43.400 [core.load] ** Viaccess (pri -10)
Feb 8 22:35:43.400 [core.load] ** Irdeto (pri -10)
Feb 8 22:35:43.400 [core.load] ** Irdeto2 (pri -8)
Feb 8 22:35:43.400 [core.load] ** Fake-NDS (pri -12)
Feb 8 22:35:43.400 [core.load] ** SC-VideoGuard2 (pri -5)
Feb 8 22:35:43.400 [core.load] ** SC-Seca (pri -5)
Feb 8 22:35:43.401 [core.load] ** Nagra (pri -10)
Feb 8 22:35:43.401 [core.load] ** Nagra2 (pri -10)
Feb 8 22:35:43.401 [core.load] ** Cardclient (pri -15)
Feb 8 22:35:43.401 [core.load] ** @SHL (pri -10)
Feb 8 22:35:43.401 [core.load] ** SC-Viaccess (pri -5)
Feb 8 22:35:43.401 [core.load] ** SC-Nagra (pri -5)
Feb 8 22:35:43.401 [core.load] ** ConstCW (pri -20)
Feb 8 22:35:43.401 [core.load] ** SC-Irdeto (pri -5)

4. SoftCam.key:
# *** ORF ****
W 0D05 04 CC 0987CF2A611D; CardSystem Key
W 0D05 04 20 00 A9D732F5E738E48A91C8638B12746661; OP key
# *** AustriaSat ****
W 0D05 10 CC 0987CF2A611D; CardSystem Key
W 0D05 10 20 01 C229A4036100E81A42BAC3C70EBBC852; OP key

doc34 · 9. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Installiere mal cccam das hat bei mir auch geholfen.

mkdir /emu
mkdir /emu/cccam
mkdir /emu/script
mkdir /emu/log
mkdir /var/etc
mkdir /var/keys
chmod 777 /var/etc
chmod 777 /emu
chmod 777 /emu/*
chown <username> /emu
chown <username> /emu/*
Als <username>, den User angeben, den ihr während der Installtions des Ubuntus, angegeben habt.
Upload CCcam
Mit einem FTP-Programm die CCcam.x86 nach /emu/cccam und die CCcam.cfg to /var/etc kopieren. Falls eure CCcam-Datei anders benannt ist, bitte nach CCcam.x86 umbenennen.

Benutzernamen und Password für den FTP, sind wiederum diejenigen, die ihr während der Ubuntu-Installation angegeben habt.

CCcam "ausführbar" machen (putty):
code:
chmod 755 /emu/cccam/CCcam.x86

big_blue · 10. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Hi.

Ich habe diesen Thread ausführlich gelesen und bin genau Eurer Anleitung gefolgt, jedoch bekomme ich das sc plugin mit meinem oscam nicht ans laufen. Ich konnte das plugin ohne Probleme compilieren und installieren, aber leider bleibt das Bild schwarz. Der VDR baut eine Verbindung zum oscam über das mgcamd Protokoll auf, jedoch werden keine Anfragen an den Server geschickt. Vorab schon mal vielen Dank, ich hoffe ihr könnt mir helfen.

Hier noch mal meine configs und die logs:

Code:

cardclient.conf:
newcamd:$IP:$PORT:1/1702/FFFF:$USERNAME:$PASSWD:$KEY

override.conf:
tunnel:{1833:S19.2E:}1702:nagra-beta

oscam.log:
encrypted newcamd:$PORT-client $IP-Client granted ($USERNAME, au(auto)=sky)
user $USERNAME authenticated successfully (generic)
AU enabled for user $USERNAME on reader sky
disconnected  from $IP

vdr-sc:
Feb  8 08:18:48.573 [general.debug] SC cleanup done
Feb  8 08:18:56.071 [general.debug] logfile '/var/log/vdr-sc' opened
Feb  8 08:18:56.070 [general.debug] capturing device 0/0
Feb  8 08:18:56.072 [general.debug] capturing device 0/1
Feb  8 08:18:56.089 [general.info] SC version 1.0.0pre-HG-61975953edd0+ initializing (VDR 1.7.16)
Feb  8 08:18:56.095 [general.info] SC version 1.0.0pre-HG-61975953edd0+ starting (VDR 1.7.16)
Feb  8 08:18:56.096 [core.load] ** Plugin config:
Feb  8 08:18:56.096 [core.load] ** Key updates (AU) are enabled (all CAIDs) (no prestart)
Feb  8 08:18:56.096 [core.load] ** Local systems take priority over cached remote
Feb  8 08:18:56.096 [core.load] ** Concurrent FF recordings are NOT allowed
Feb  8 08:18:56.096 [core.load] ** DON'T force transfermode with digital audio
Feb  8 08:18:56.096 [core.load] ** ECM cache is set to DISABLED
Feb  8 08:18:56.096 [core.load] ** ScCaps are 1 2 3 4 5 6 7 8 0 0
Feb  8 08:18:56.096 [general.info] loading cardclient config from /var/lib/vdr/plugins/sc/cardclient.conf
Feb  8 08:18:56.096 [cardclient.newcamd] now using protocol version 525 (cdLen=8)
Feb  8 08:18:56.097 [cardclient.core] hostname=$IP-Server port=$PORT emm=1 emmCaids 1702/ffff
Feb  8 08:18:56.097 [cardclient.core] Newcamd: username=USERNAME password=PASSWD key=KEY
Feb  8 08:18:56.097 [cardclient.core] client 'Newcamd' ready
Feb  8 08:18:56.098 [core.net] connecting to $IP-Server:$PORT/tcp ($IP-Server)
Feb  8 08:18:56.137 [cardclient.login] Newcamd: CaID=1702 admin=1 srvUA=000000001A801D62 provider 000003/000000000FFFFFFF 000002/0000000000000000 000001/000000000FFFFFFF 000000/0000000000000000
Feb  8 08:18:56.138 [cardclient.newcamd] now using protocol version 525 (cdLen=8)
Feb  8 08:18:56.138 [cardclient.core] hostname=$IP-Server port=$PORT emm=1 emmCaids 1830/ffff
Feb  8 08:18:56.138 [cardclient.core] Newcamd: username=oscam password=dg38ldbwe8r4b4 key=7458363012639027620235689239
Feb  8 08:18:56.138 [cardclient.core] client 'Newcamd' ready
Feb  8 08:18:56.139 [core.net] connecting to $IP-Server:$PORT/tcp ($IP-Server)
Feb  8 08:18:56.176 [cardclient.login] Newcamd: CaID=1830 admin=1 srvUA=0000000048BF553C provider 008011/0000000048BF0000 <unhandled> 000000/0000000048BF0000 <unhandled> 003411/0000000048BF0000 <unhandled>
Feb  8 08:18:56.177 [general.error] failed open /var/lib/vdr/plugins/sc/SoftCam.Key: No such file or directory
Feb  8 08:18:56.177 [general.info] loading ecm cache from /var/lib/vdr/plugins/sc/ecm.cache
Feb  8 08:18:56.177 [general.error] failed open /var/lib/vdr/plugins/sc/smartcard.conf: No such file or directory
Feb  8 08:18:56.178 [general.error] failed open /var/lib/vdr/plugins/sc/cardslot.conf: No such file or directory
Feb  8 08:18:56.178 [general.info] loading overrides from /var/lib/vdr/plugins/sc/override.conf
Feb  8 08:18:56.178 [core.override] tunnel: 1833:S19.2E: - to 1702, rewriter nagra-beta(1001)
Feb  8 08:18:56.178 [core.load] loaded 1 overrides from /var/lib/vdr/plugins/sc/override.conf
Feb  8 08:18:56.178 [general.error] no keys loaded for softcam!
Feb  8 08:18:56.179 [core.load] ** registered systems:
Feb  8 08:18:56.179 [core.load] ** Fake-NDS          (pri -12)
Feb  8 08:18:56.179 [core.load] ** ConstCW           (pri -20)
Feb  8 08:18:56.179 [core.load] ** SC-Irdeto         (pri  -5)
Feb  8 08:18:56.179 [core.load] ** SC-Cryptoworks    (pri  -5)
Feb  8 08:18:56.179 [core.load] ** Viaccess          (pri -10)
Feb  8 08:18:56.179 [core.load] ** SC-Nagra          (pri  -5)
Feb  8 08:18:56.180 [core.load] ** SC-VideoGuard2    (pri  -5)
Feb  8 08:18:56.180 [core.load] ** @SHL              (pri -10)
Feb  8 08:18:56.180 [core.load] ** SC-Seca           (pri  -5)
Feb  8 08:18:56.180 [core.load] ** Cardclient        (pri -15)
Feb  8 08:18:56.180 [core.load] ** Cryptoworks       (pri -10)
Feb  8 08:18:56.180 [core.load] ** Nagra             (pri -10)
Feb  8 08:18:56.180 [core.load] ** Nagra2            (pri -10)
Feb  8 08:18:56.181 [core.load] ** Irdeto            (pri -10)
Feb  8 08:18:56.181 [core.load] ** Irdeto2           (pri  -8)
Feb  8 08:18:56.181 [core.load] ** Seca              (pri -10)
Feb  8 08:18:56.181 [core.load] ** Conax             (pri -10)
Feb  8 08:18:56.181 [core.load] ** SC-Viaccess       (pri  -5)
Feb  8 08:18:56.181 [core.load] ** SC-Conax          (pri  -5)
Feb  8 08:18:56.196 [core.ci] card 1, slot 0 (v= 1) caids: 0100 0500 09c4 1833 1702 0d00 0d02 1811 1815 0d05 0d95 1810 0622 0648 0b00 1834 09af 09c7 1722 1837 0d03 0d22 0624 0d70 0d96 09b2 1830 1836 1843
Feb  8 08:18:56.196 [core.ci] 1: reset of slot 0 requested
Feb  8 08:18:56.197 [general.info] Using software decryption on card 1
Feb  8 08:18:56.210 [core.ci] card 0, slot 0 (v= 1) caids: 0100 0500 09c4 1833 1702 0d00 0d02 1811 1815 0d05 0d95 1810 0622 0648 0b00 1834 09af 09c7 1722 1837 0d03 0d22 0624 0d70 0d96 09b2 1830 1836 1843
Feb  8 08:18:56.210 [core.ci] 0: reset of slot 0 requested
Feb  8 08:18:56.211 [general.info] Using software decryption on card 0
Feb  8 08:18:57.749 [core.ci] 1.0: doReply changed, reset triggered
Feb  8 08:18:57.749 [core.ci] 1.0: now using CAIDs version 1
Feb  8 08:18:57.749 [core.ci] 1.0: status 'present'
Feb  8 08:18:57.763 [core.ci] 0.0: doReply changed, reset triggered
Feb  8 08:18:57.763 [core.ci] 0.0: now using CAIDs version 1
Feb  8 08:18:57.763 [core.ci] 0.0: status 'present'
Feb  8 08:18:58.250 [core.ci] 1.0: status 'reset'
Feb  8 08:18:58.264 [core.ci] 0.0: status 'reset'
Feb  8 08:18:59.252 [core.ci] 1.0: status 'ready'
Feb  8 08:18:59.266 [core.ci] 0.0: status 'ready'
Feb  8 08:18:59.303 [core.ci] 1.0 sending CA info
Feb  8 08:18:59.317 [core.ci] 0.0 sending CA info
Feb  8 08:19:00.305 [core.ci] 1.0 CA_PMT decoding len=7 lm=3 prg=0 len=1/1 ci_cmd(G)=03
Feb  8 08:19:00.305 [core.ci] 1.0 got CA pmt ciCmd=3 caLm=3
Feb  8 08:19:00.306 [core.ci] 1.0 answer to query
Feb  8 08:19:00.319 [core.ci] 0.0 CA_PMT decoding len=7 lm=3 prg=0 len=1/1 ci_cmd(G)=03
Feb  8 08:19:00.319 [core.ci] 0.0 got CA pmt ciCmd=3 caLm=3
Feb  8 08:19:00.319 [core.ci] 0.0 answer to query
Feb  8 08:19:06.480 [core.pids] 1: now tuned to source 5300ff40(S19.2E) transponder 1b48e
Feb  8 08:19:06.480 [core.pids] 0: now tuned to source 5300ff40(S19.2E) transponder 1b48e
Feb  8 08:19:06.516 [core.ci] 1.0 CA_PMT decoding len=10 lm=4 prg=26 len=0/a pid=2,7ff len=0/5 pid=4,800 len=0/0
Feb  8 08:19:06.516 [core.ci] 1.0 got CA pmt ciCmd=-1 caLm=4
Feb  8 08:19:06.517 [core.ci] 1.0 set CAM decrypt (prg 26)
Feb  8 08:19:06.517 [core.pids] 1: add SID 26 (zero=0 noshift=1)
Feb  8 08:19:06.517 [core.pids] 1: pids VIDEO=07ff AUDIO=0800
Feb  8 08:19:06.517 [core.pids] SimplyCa entry pidCa=0
Feb  8 08:19:06.517 [core.pids] prgca: <empty>
Feb  8 08:19:06.517 [core.pids] pidca 07ff: <empty>
Feb  8 08:19:06.517 [core.pids] pidca 0800: <empty>
Feb  8 08:19:06.517 [core.pids] SimplyCa exit pidCa=0
Feb  8 08:19:06.517 [core.pids] prgca: <empty>
Feb  8 08:19:06.517 [core.pids] pidca 07ff: <empty>
Feb  8 08:19:06.517 [core.pids] pidca 0800: <empty>
Feb  8 08:19:06.517 [core.pids] 1: SID=26 zero=0 | sid=-/-/- zero=-/-/- idle=-/-/-
Feb  8 08:19:06.517 [core.pids] 1: found handler for SID 26 (1.1 idle=1 idx=1)
Feb  8 08:19:06.517 [core.ecm] 1.1: setting new SID 26
Feb  8 08:19:06.517 [core.pids] 1.1: pids on entry
Feb  8 08:19:06.517 [core.pids] 1.1: pids after delete
Feb  8 08:19:06.518 [core.pids] 1: descrambling pid 07ff on index 1
Feb  8 08:19:06.518 [core.pids] 1: descrambling pid 0800 on index 1
Feb  8 08:19:06.518 [core.pids] 1.1: pids after add VIDEO=07ff AUDIO=0800
Feb  8 08:19:06.518 [core.ecm] 1.1: is no longer idle
Feb  8 08:19:06.578 [core.ecm] 1.1: triggered SID -1/26 idx -1/1 mode -1/0 -
Feb  8 08:19:07.620 [core.ci] 1.0 CA_PMT decoding len=35 lm=5 prg=26 len=2f/2f ci_cmd(G)=01
Feb  8 08:19:07.620 [core.ci] 1.0 got CA pmt ciCmd=1 caLm=5
Feb  8 08:19:07.620 [core.ci] 1.0 set CAM decrypt (prg 26)
Feb  8 08:19:07.621 [core.pids] 1: update SID 26 (zero=0 noshift=1)
Feb  8 08:19:07.621 [core.pids] 1: SID=26 zero=0 | sid=1/26/0 zero=-/-/- idle=-/-/-
Feb  8 08:19:07.621 [core.pids] 1: found handler for SID 26 (1.1 idle=0 idx=1)
Feb  8 08:19:07.621 [core.pids] 1.1: pids on entry VIDEO=07ff AUDIO=0800
Feb  8 08:19:07.621 [core.pids] 1.1: pids after delete
Feb  8 08:19:07.621 [core.pids] 1.1: pids after add
Feb  8 08:19:07.621 [core.ecm] 1.1: is idle now
Feb  8 08:19:07.682 [core.pids] 1: tune to same source/transponder
Feb  8 08:19:07.722 [core.ci] 1.0 CA_PMT decoding len=3f lm=4 prg=26 len=2f/39 ci_cmd(G)=01 pid=2,7ff len=0/5 pid=4,800 len=0/0
Feb  8 08:19:07.722 [core.ci] 1.0 got CA pmt ciCmd=1 caLm=4
Feb  8 08:19:07.722 [core.ci] 1.0 set CAM decrypt (prg 26)
Feb  8 08:19:07.722 [core.pids] 1: add SID 26 (zero=0 noshift=1)
Feb  8 08:19:07.722 [core.pids] 1: pids VIDEO=07ff AUDIO=0800
Feb  8 08:19:07.722 [core.pids] SimplyCa entry pidCa=0
Feb  8 08:19:07.722 [core.pids] pidca 07ff: <empty>
Feb  8 08:19:07.722 [core.pids] pidca 0800: <empty>
Feb  8 08:19:07.722 [core.pids] SimplyCa exit pidCa=0
Feb  8 08:19:07.723 [core.pids] pidca 07ff: <empty>
Feb  8 08:19:07.723 [core.pids] pidca 0800: <empty>
Feb  8 08:19:07.723 [core.pids] 1: SID=26 zero=0 | sid=1/26/1 zero=-/-/- idle=1/26/1
Feb  8 08:19:07.723 [core.pids] 1: found handler for SID 26 (1.1 idle=1 idx=1)
Feb  8 08:19:07.723 [core.pids] 1.1: pids on entry
Feb  8 08:19:07.723 [core.pids] 1.1: pids after delete
Feb  8 08:19:07.723 [core.pids] 1: descrambling pid 07ff on index 1
Feb  8 08:19:07.723 [core.pids] 1: descrambling pid 0800 on index 1
Feb  8 08:19:07.723 [core.pids] 1.1: pids after add VIDEO=07ff AUDIO=0800
Feb  8 08:19:07.723 [core.ecm] 1.1: is no longer idle
Feb  8 08:19:07.780 [core.ecm] 1.1: triggered SID 26/26 idx 1/1 mode 1/0 -
Feb  8 08:19:07.781 [core.ecm] 1.1: CA descriptors for SID 26 (len=46)
Feb  8 08:19:07.781 [core.ecm] 1.1: found 1702(0000) (Irdeto) id 0000 with ecm 1764/80 (new)
Feb  8 08:19:07.781 [core.ecm] 1.1: found 1722(0000) (Irdeto) id 0000 with ecm 1664/80 (new)
Feb  8 08:19:07.781 [core.override] tunnel: to 1702 (1001)
Feb  8 08:19:07.781 [core.ecm] 1.1: found 1702(1833) (Nagra2) id 0000 with ecm 1864/80 (new)
Feb  8 08:19:07.782 [core.ecm] 1.1: found 1834(0000) (Nagra2) id 0000 with ecm 1c64/80 (new)
Feb  8 08:19:07.782 [core.ecm] 1.1: found 09c4(0000) (Fake-NDS) id 0000 with ecm 1b64/80 (new)
Feb  8 08:19:07.782 [core.ecm] 1.1: found 09c7(0000) (Fake-NDS) id 0000 with ecm 1d64/80 (new)
Feb  8 08:19:07.782 [core.ecm] 1.1: found 09af(0000) (Fake-NDS) id 0000 with ecm 1f64/80 (new)
Feb  8 08:19:07.784 [core.ecm] 1.1: try system Irdeto (1702) id 0000 with ecm 1764 (pri=-10)
Feb  8 08:19:08.625 [core.ecm] 1.1: try system Irdeto (1722) id 0000 with ecm 1664 (pri=-10)
Feb  8 08:19:10.308 [core.ecm] 1.1: try system Irdeto (1702) id 0000 with ecm 1864 (pri=-10)
Feb  8 08:19:11.991 [core.ecm] 1.1: try system Nagra2 (1834) id 0000 with ecm 1c64 (pri=-10)
Feb  8 08:19:13.673 [core.ecm] 1.1: try system Fake-NDS (09c4) id 0000 with ecm 1b64 (pri=-12)
Feb  8 08:19:15.356 [core.ecm] 1.1: try system Fake-NDS (09c7) id 0000 with ecm 1d64 (pri=-12)
Feb  8 08:19:17.039 [core.ecm] 1.1: try system Fake-NDS (09af) id 0000 with ecm 1f64 (pri=-12)
Feb  8 08:19:18.722 [core.ecm] 1.1: try system Cardclient (1702) id 0000 with ecm 1764 (pri=-15)
Feb  8 08:19:20.405 [core.ecm] 1.1: try system Cardclient (1702) id 0000 with ecm 1864 (pri=-15)
Feb  8 08:19:22.088 [core.ecm] 1.1: CA descriptors for SID 26 (len=46)
Feb  8 08:19:22.088 [core.ecm] 1.1: descriptor 17 02 f7 64 00 64
Feb  8 08:19:22.088 [core.ecm] 1.1: found 1702(0000) (Irdeto) id 0000 with ecm 1764/80 (already present)
Feb  8 08:19:22.088 [core.ecm] 1.1: descriptor 17 22 f6 64 00 64
Feb  8 08:19:22.088 [core.ecm] 1.1: found 1722(0000) (Irdeto) id 0000 with ecm 1664/80 (already present)
Feb  8 08:19:22.088 [core.ecm] 1.1: descriptor 18 33 f8 64
Feb  8 08:19:22.088 [core.override] tunnel: to 1702 (1001)
Feb  8 08:19:22.088 [core.ecm] 1.1: found 1702(1833) (Nagra2) id 0000 with ecm 1864/80 (already present)
Feb  8 08:19:22.089 [core.ecm] 1.1: descriptor 18 34 fc 64
Feb  8 08:19:22.089 [core.ecm] 1.1: found 1834(0000) (Nagra2) id 0000 with ecm 1c64/80 (already present)
Feb  8 08:19:22.089 [core.ecm] 1.1: descriptor 09 c4 fb 64
Feb  8 08:19:22.089 [core.ecm] 1.1: found 09c4(0000) (Fake-NDS) id 0000 with ecm 1b64/80 (already present)
Feb  8 08:19:22.089 [core.ecm] 1.1: descriptor 09 c7 fd 64
Feb  8 08:19:22.089 [core.ecm] 1.1: found 09c7(0000) (Fake-NDS) id 0000 with ecm 1d64/80 (already present)
Feb  8 08:19:22.089 [core.ecm] 1.1: descriptor 09 af ff 64
Feb  8 08:19:22.089 [core.ecm] 1.1: found 09af(0000) (Fake-NDS) id 0000 with ecm 1f64/80 (already present)
Feb  8 08:19:22.090 [core.ecm] 1.1: try system Irdeto (1702) id 0000 with ecm 1764 (pri=-10)
Feb  8 08:19:23.772 [core.ecm] 1.1: try system Irdeto (1722) id 0000 with ecm 1664 (pri=-10)
Feb  8 08:19:25.455 [core.ecm] 1.1: try system Irdeto (1702) id 0000 with ecm 1864 (pri=-10)
Feb  8 08:19:27.138 [core.ecm] 1.1: try system Nagra2 (1834) id 0000 with ecm 1c64 (pri=-10)
Feb  8 08:19:28.820 [core.ecm] 1.1: try system Fake-NDS (09c4) id 0000 with ecm 1b64 (pri=-12)
Feb  8 08:19:30.503 [core.ecm] 1.1: try system Fake-NDS (09c7) id 0000 with ecm 1d64 (pri=-12)
Feb  8 08:19:32.186 [core.ecm] 1.1: try system Fake-NDS (09af) id 0000 with ecm 1f64 (pri=-12)
Feb  8 08:19:33.868 [core.ecm] 1.1: try system Cardclient (1702) id 0000 with ecm 1764 (pri=-15)
Feb  8 08:19:35.551 [core.ecm] 1.1: try system Cardclient (1702) id 0000 with ecm 1864 (pri=-15)
Feb  8 08:19:37.234 [core.ecm] 1.1: CA descriptors for SID 26 (len=46)
Feb  8 08:19:37.234 [core.ecm] 1.1: descriptor 17 02 f7 64 00 64
Feb  8 08:19:37.234 [core.ecm] 1.1: found 1702(0000) (Irdeto) id 0000 with ecm 1764/80 (already present)
Feb  8 08:19:37.234 [core.ecm] 1.1: descriptor 17 22 f6 64 00 64
Feb  8 08:19:37.234 [core.ecm] 1.1: found 1722(0000) (Irdeto) id 0000 with ecm 1664/80 (already present)
Feb  8 08:19:37.234 [core.ecm] 1.1: descriptor 18 33 f8 64
Feb  8 08:19:37.234 [core.override] tunnel: to 1702 (1001)
Feb  8 08:19:37.235 [core.ecm] 1.1: found 1702(1833) (Nagra2) id 0000 with ecm 1864/80 (already present)
Feb  8 08:19:37.235 [core.ecm] 1.1: descriptor 18 34 fc 64

dumchem · 14. Februar 2011

AW: yavdr, vdr-sc, softcam.key

danke doc34 für deine Anleitung habe es gerade auf einen frisch aktualisiertes YAVDR 0.3a gemacht und es läuft super

big_blue · 19. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Hi.

Vielen Dank für die Hilfe. Ich habe es jetzt hinbekommen. Ich habe eine Dualtuner Karte aber nur ein Kabel angeschlossen. Ich habe jetzt den VDR per -D option mit nur einem Tuner gestartet und jetzt klappt es.

VIELEN Dank für die Hilfe

Gelöschtes Mitglied 307691 · 19. Februar 2011

AW: yavdr, vdr-sc, softcam.key

@all

Sind bei Euch die AustriaSat Sender noch hell? Der eine MTV Sender (Music) ging noch nie bei mir, aber eigentlich der Rest, AXN, MTV Rock|Dance, VH1 etc.

Aber seit einigen Tagen sind die Sender dunkel?

[Edit] Hmm, ja, hat sich geklärt, habe die nötigen Posts gefunden, ist kein großer Verlußt. [/Edit]

meitevau · 21. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Hi,

wollte gemäß doc34' Anleitung vdr-sc auf meinem Ubuntu 64bit installieren.

Leider bricht die Erstellung des Paketes mit dieser Fehlermeldung ab:

Die Passage im Makefile sieht bei mir wie folgt aus:

# FFdeCSA
CPUOPT ?= athlon64
PARALLEL ?= PARALLEL_128_SSE
CSAFLAGS ?= -Wall -fPic -g -O2 -mmmx -fomit-frame-pointer -fexpensive-optimizations -funroll-loops
FFDECSADIR = FFdecsa
FFDECSA = $(FFDECSADIR)/FFdecsa.o
FFDECSATEST = $(FFDECSADIR)/FFdecsa_test.done…

Was läuft da schief?

meitevau

dumchem · 26. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Nach der Umstellung meiner HTPCs von (Sundtek DVB-C USB Stick) auf eine MYSTIQ CABIX C2 Karte sehe ich zwar das sich das SC Plugin mit dem OSCAM Server verbindet aber es kommt kein Bild mit meinem YAVDR 0.3a

EDIT: habe das Plugin neu kompiliert und es waren bei der Installation von YAVDR keine weiteren Treiber Notwendig für die Karte

doc34 · 27. Februar 2011

AW: yavdr, vdr-sc, softcam.key

Unter Sc DVB Karte einstellen

yavdr, vdr-sc, softcam.key

S04sauger

Ist gelegentlich hier

scovery1

Newbie

S04sauger

Ist gelegentlich hier

scovery1

Newbie

ranXeron

Newbie

doc34

Ist gelegentlich hier

johnzac

Newbie

doc34

Ist gelegentlich hier

big_blue

Newbie

dumchem

Ist gelegentlich hier

big_blue

Newbie

Gelöschtes Mitglied 307691

Guest

meitevau

Meister

dumchem

Ist gelegentlich hier

doc34

Ist gelegentlich hier

Ähnliche Themen

yavdr, vdr-sc, softcam.key

Ist gelegentlich hier

Newbie

Ist gelegentlich hier

Newbie

Newbie

Ist gelegentlich hier

Newbie

Ist gelegentlich hier

Newbie

Ist gelegentlich hier

Newbie

Gelöschtes Mitglied 307691

Guest

Meister

Ist gelegentlich hier

Ist gelegentlich hier

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz