Vu+duo2

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 06 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 01 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

[reader]
label = proxyline
protocol = cccam
device = xxxxx.dyndns.org,12000
user = user_sto_si_dobio
password = pass_sto_si_dobio
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
ccckeepalive = 1

[account]
user = mojbox
group = 1

[global]
logfile = /tmp/oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 512

[dvbapi]
enabled = 1
user = mojbox
boxtype = dreambox

[webif]
httpport = 23000
httpuser = root
httppwd = pass
httphelplang = de
httprefresh = 25
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.0

[global]
usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw
disableuserfile = 0
waitforcards = 0
saveinithistory = 1

[monitor]
port = 988
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 1

[dvbapi]
enabled = 1
boxtype = dreambox
user = user

[webif]
httpport = 16001
httpuser = dreambox
httppwd = zone
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[reader]
label = server1
protocol = cccam
device = gbsa.ttrr.de,12000
user = llguba1099
password = llutr7777
group = 1
cccversion = 2.1.1
cccmaxhops = 3

[reader]
label = server2
protocol = cccam
device = server,port
user = user
password = password
group = 2
cccversion = 2.1.1
cccmaxhops = 3


Primjer linija se zove ovako gbsa.ttrr.de12000 llguba1099llutr7777

[account]
user = user
pwd = localpwd
description = dvbapi
group = 1,2,3,4
services = all
monlevel = 0
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 3
cccreshare = 1
cccstealth = 0